新型超级电容器的研发进展

传统超级电容器受低能量密度的限制,在当今器件研发中需更加关注电极材料结构-组成-性能研究。 本文总结了新型赝电容器的发展历程及其研发过程中存在的挑战与解决措施,着重从胶体离子超级电容器电极材料等新型的电极材料和氧化还原电解质两个方面进行综述。 原位合成的胶体离子超级电容器电极材料比非原位合成的电极材料具有更高的反应活性,并且以近似离子的状态存在,有效增加了电极材料的比容量。 氧化还原电解质的使用在不改变电极材料的前提下,进一步提高了超级电容器的能量密度。 初步介绍了新型锂离子电容器。 锂离子电容器同时使用电池型材料和电容型材料,可提高其能量密度。 依据当前超级电容器的研发现状,未来有望将电池材料和电容器材料结合使用,进而形成电池电容器或电容电池,使其同时具有高的能量密度和功率密度。     

聚合物水凝胶基超级电容器的研究进展

可伸展性和可压缩性是超级电容器作为现代柔性可穿戴电子设备的关键性能。聚合物水凝胶因其优异的力学性能、独特的网络状结构等优点,成为新一代高性能超级电容器的理想材料。它不仅可作为高效储能的柔性电极材料,而且可作为准固态电解质材料,在克服传统液体电解质系列缺陷的同时,获得更加轻薄、安全、稳定的柔性全固态储能器件。本文以聚合物水凝胶的化学组成为线索,分别介绍了聚合物水凝胶在超级电容器电极和电解质两方面的应用研究进展,并进一步对聚合物水凝胶在该领域的发展趋势进行了展望。     

用于超级电容器的锰钴氧化物/碳纤维材料

The development of high-performance supercapacitor electrode materials is imperative to alleviate the ongoing energy crisis. Numerous transition metals (oxides) have been studied as electrode materials for supercapacitors owing to their low cost, environmental-friendliness, and excellent electrochemical performance. Among the developed binary transition metal oxides, manganese cobalt oxides typically show high theoretical capacitance and stable electrochemical performance, and are widely used in the electrode materials of supercapacitors. However, the poor conductivity and active material utilization of manganese cobalt oxide-based electrode materials limit their potential capacitance application. Cotton is mainly composed of organic carbon-containing materials, which can be transformed to carbon fibers after calcination. The resultant carbonaceous material exhibits a large specific surface area and good conductivity. Such advantages could potentially suppress the negative effects caused by the poor conductivity and small specific surface area of manganese cobalt oxides, thereby improving the electrochemical performance. Herein, we firstly deposited manganese cobalt oxides on cotton by a simple hydrothermal method, yielding a composite of manganese cobalt oxides and carbon fibers via subsequent calcination, to improve the electrochemical performance of the electrode material. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), and electrochemical characterizations were used to investigate the physical, chemical, and electrochemical properties of the prepared samples. The fabricated manganese cobalt oxides in the composite were uniformly dispersed on the carbon fiber surface, which increased the contact between the interface of the electrode material and electrolyte, and enhanced electrode material utilization. The electrode material was confirmed to have well contacted with the electrolyte during a contact angle test. Hence, a pseudo-capacitance reaction completely occurred on the manganese cobalt oxide material. Moreover, the addition of carbon fibers reduced the resistance of the material, resulting in excellent capacitive performance. The capacitance of the prepared composite was 854 F∙g^-1 at a current density of 2 A∙g^-1. The capacitance was maintained at 72.3% after 2000 cycles at a current density of 2 A∙g^-1. These results indicate that the manganese cobalt oxide and carbon fiber composite is a promising electrode material for high-performance supercapacitors. The findings presented herein provide a strategy for coupling with carbon materials to enhance the performance of supercapacitor electrode materials based on manganese cobalt oxides. Thus, novel insights into the design of high-performance supercapacitors for energy management are provided.     

Intercalation materials for lithium rechargeable batteries

An overview is given of intercalation materials for both the negative and the positive electrodes of lithium batteries, including the results of our own research. As well as lithium metal as a negative electrode, we consider insertion materials based on aluminium alloys. In the case of the positive electrode metal-oxides based on manganese, nickel and cobalt are discussed. Received: 27 May 1997 / Accepted: 30 July 1997     

Enriching redox active sites by interconnected nanowalls-like nickel cobalt phospho-sulfide nanosheets for high performance supercapacitors

Although transition metal phospho-sulfides deliver outstanding electrochemical performance, complex preparation methods hindered their further development. Herein, we report a facile one-step electrodeposition approach to deposit interconnected nanowalls-like nickel cobalt phospho-sulfide (Ni-Co-P-S) nanosheets onto the surface of carbon cloth. The thin Ni-Co-P-S nanosheets with multi-components and synergetic effects delivered rich active sites, further enhancing reversible capacitance. Therefore, the as-prepared Ni-Co-P-S electrode materials exhibit excellent electrochemical performance in a three-electrode system, showcasing a high specific capacitance of 2744 F/g at 4 A/g. The full supercapacitors based on Ni-Co-P-S as positive electrode and active carbon as negative electrode showcase a high specific capacitance of 110.9 F/g at 1 A/g, impressive energy density of 39.4 Wh/kg at a power density of 797.5 W/kg in terms of excellent cycling stability (91.87% retention after 10,000 cycles). This simple electrode position strategy for synthesizing Ni-Co-P-S can be extended to prepare electrode materials for various sustainable electrochemical energy storage/conversion technologies.     

Multi‐Anion Intercalated Layered Double Hydroxide Nanosheet‐Assembled Hollow Nanoprisms with Improved Pseudocapacitive and Electrocatalytic Properties

Electrochemically active hollow nanostructured materials hold great promise in diverse energy conversion and storage applications, however, intricate synthesis steps and poor control over compositions and morphologies have limited the realization of delicate hollow structures with advanced functional properties. In this study, we demonstrate a one‐step wet‐chemical strategy for co‐engineering the hollow nanostructure and anion intercalation of nickel cobalt layered double hydroxide (NiCo‐LDH) to attain highly electrochemical active energy conversion and storage functionalities. Self‐templated pseudomorphic transformation of cobalt acetate hydroxide solid nanoprisms using nickel nitrate leads to the construction of well‐defined NiCo‐LDH hollow nanoprisms (HNPs) with multi‐anion intercalation. The unique hierarchical nanosheet‐assembled hollow structure and efficiently expanded interlayer spacing offer an increased surface area and exposure of active sites, reduced mass and charge transfer resistance, and enhanced stability of the materials. This leads to a significant improvement in the pseudocapacitive and electrocatalytic properties of NiCo‐LDH HNP with respect to specific capacitance, rate and cycling performance, and OER overpotential, outperforming most of the recently reported NiCo‐based materials. This work establishes the potential of manipulating sacrificial template transformation for the design and fabrication of novel classes of functional materials with well‐defined nanostructures for electrochemical applications and beyond.     

Recent Advances in Porous Carbon Materials for Electrochemical Energy Storage

Climate change and the energy crisis have promoted the rapid development of electrochemical energy‐storage devices. Owing to many intriguing physicochemical properties, such as excellent chemical stability, high electronic conductivity, and a large specific surface area, porous carbon materials have always been considering as a promising candidate for electrochemical energy storage. To date, a wide variety of porous carbon materials based upon molecular design, pore control, and compositional tailoring have been proposed for energy‐storage applications. This focus review summarizes recent advances in the synthesis of various porous carbon materials from the view of energy storage, particularly in the past three years. Their applications in representative electrochemical energy‐storage devices, such as lithium‐ion batteries, supercapacitors, and lithium‐ion hybrid capacitors, are discussed in this review, with a look forward to offer some inspiration and guidelines for the exploitation of advanced carbon‐based energy‐storage materials.     

Metal Oxide/Graphene Composites for Supercapacitive Electrode Materials

Graphene composites with metal or metal oxide nanoparticles have been extensively investigated owing to their potential applications in the fields of fuel cells, batteries, sensing, solar cells, and catalysis. Among them, much research has focused on supercapacitor applications and have come close to realization. Composites include monometal oxides of cobalt, nickel, manganese, and iron, as well as their binary and ternary oxides. In addition, their morphological control and hybrid systems of carbon nanotubes have also been investigated. This review presents the current trends in research on metal oxide/graphene composites for supercapacitors. Furthermore, methods are suggested to improve the properties of electrochemical capacitor electrodes.     

Hybrid Hydrogels of Porous Graphene and Nickel Hydroxide as Advanced Supercapacitor Materials

Graphene‐based hydrogels can be used as supercapacitor electrodes because of their excellent conductivity, their large surface area and their high compatibility with electrolytes. Nevertheless, the large aspect ratio of graphene sheets limits the kinetics of processes occurring in the electrode of supercapacitors. In this study, we have introduced in‐plane and out‐of‐plane pores into a graphene–nickel hydroxide (Ni(OH)₂) hybrid hydrogel, which facilitates charge and ion transport in the electrode. Due to its optimised chemistry and architecture, the hybrid electrode demonstrates excellent electrochemical properties with a combination of high charge storage capacitance, fast rate capability and stable cycling performance. Remarkably, the Ni(OH)₂ in the hybrid contributes a capacitance as high as 3138.5 F g^?1, which is comparable to its theoretical capacitance, suggesting that such structure facilitates effectively charge‐transfer reactions in electrodes. This work provides a facile pathway for tailoring the porosity of graphene‐based materials for improved performances. Moreover, this work has also furthered our understanding in the effect of pore and hydrogel structures on the electrochemical properties of materials.     

电化学电容器连续模型的建立与研究进展

电化学电容器（超级电容器）是一种兼具高能量密度和高功率密度的新型储能元件,它既具有传统电容器大电流快速充放电的特性,又具有蓄电池高储能密度的特性. 近几年,电化学电容器储能机理的研究和纳米结构电极复合材料的合成不断取得新突破,超级电容器的电化学性能得到了显著的提高. 为了更好地解析电化学电容器的工作特性,建立描述电容器内部浓度分布和电场的物理模型是一项非常重要的研究方法. 本文首先介绍电化学电容器理论基础,并论述近几年电化学电容器连续模型研究进展,最后阐述连续模型进一步发展的前景和挑战.     

Nanoarchitectured Graphene‐Based Supercapacitors for Next‐Generation Energy‐Storage Applications

Tremendous development in the field of portable electronics and hybrid electric vehicles has led to urgent and increasing demand in the field of high‐energy storage devices. In recent years, many research efforts have been made for the development of more efficient energy‐storage devices such as supercapacitors, batteries, and fuel cells. In particular, supercapacitors have great potential to meet the demands of both high energy density and power density in many advanced technologies. For the last half decade, graphene has attracted intense research interest for electrical double‐layer capacitor (EDLC) applications. The unique electronic, thermal, mechanical, and chemical characteristics of graphene, along with the intrinsic benefits of a carbon material, make it a promising candidate for supercapacitor applications. This Review focuses on recent research developments in graphene‐based supercapacitors, including doped graphene, activated graphene, graphene/metal oxide composites, graphene/polymer composites, and graphene‐based asymmetric supercapacitors. The challenges and prospects of graphene‐based supercapacitors are also discussed.     

Recent progress in lithium-ion and lithium metal batteries

Moving towards carbon-free energy and global commercialization of electric vehicles stimulated extensive development in the field of lithium-ion batteries (LIBs), and to date, many scientific and technological advances have been achieved. The number of research works devoted to developing high-capacity and stable materials for lithium- ion and lithium metal batteries (LMBs) is constantly rising. This review covers the main progress in the development of LIBs and LMBs based on research works published in 2021. One of the main goals in the recent publications is to solve the problem of instability of layered nickel-rich lithium– nickel–cobalt–manganese oxides (Ni-rich NMC) cathodes, as well as silicon anodes. Improving the stability of NMC cathodes can be achieved by doping them with cations as well as by coating the oxides’ surfaces with protective layers (organic polymers and inorganic materials). The most effective strategies for dampening volumetric changes in silicon anodes include using porous silicon structures, obtaining composites with carbon, coating silicon-containing particles with inorganic or polymeric materials, and replacing standard binder materials. Much work has been devoted to suppressing dendrite formation in LMBs by forming stable coating layers on the surface of lithium metal, preparing composite anodes and alloys, and changing the composition of electrolytes. At the same time, in the field of electrolyte development, many research works have been devoted to the search for new hybrid polymer electrolytes containing lithium-conducting inorganic materials.     

Hydrothermal Synthesis of Nickel Oxide Nanosheets for Lithium‐Ion Batteries and Supercapacitors with Excellent Performance

Nickel oxide nanosheets have been successfully synthesized by a facile ethylene glycol mediated hydrothermal method. The morphology and crystal structure of the nickel oxide nanosheets were characterized by X‐ray diffraction, field‐emission SEM, and TEM. When applied as electrode materials for lithium‐ion batteries and supercapacitors, nickel oxide nanosheets exhibited a high, reversible lithium storage capacity of 1193 mA h g^?1 at a current density of 500 mA g^?1, an enhanced rate capability, and good cycling stability. Nickel oxide nanosheets also demonstrated a superior specific capacitance of 999 F g^?1 at a current density of 20 A g^?1 in supercapacitors.     

电化学阴极沉积制备氧化镍/碳纳米管复合电极的准电容特性

A novel type of composite electrode based on multiwalled carbon nanotubes coated with nano nickel oxide particles has been used in supercapacitors. Nickel oxide cathodically deposited from Ni(NO3)2 solution with carbon nanotubes as the matrix exhibited large pseudocapacitance of 25F/g in 6 mol/L KOH. The morphology of composites was examined by scanning electron microscope (SEM). To characterize the CNTs/nickel oxide composite electrode, a charge discharge cycling test for measuring specific capacitance, cyclic voltammetry, and ac impedance test is executed. The nickel oxide composite exhibiting excellent pseudocapacitive behavior(i.e.high reversibility, high specific capacitance, and low self discharge rate) has been demonstrated to be a potential candidate for the application of electrochemical supercapacitors.     

Nickel/Cobalt Molybdate Hollow Rods Induced by Structure and Defect Engineering as Exceptional Electrode Materials for Hybrid Supercapacitor

Oxygen defects and hollow structures positively impact pseudocapacitive properties of diffusion/surface-controlled processes, a component of critical importance when building high-performance supercapacitors. Hence, we fabricated hollow nickel/cobalt molybdate rods with O-defects (D−H−NiMoO₄@CoMoO₄) through a soft-template and partial reduction method, enhancing D−H−NiMoO₄@CoMoO₄’s electrochemical performance, yielding a specific capacitance of 1329 F g⁻¹, and demonstrating excellent durability with 95.8 % capacity retention after 3000 cycles. D−H−NiMoO₄@CoMoO₄ was used as the positive electrode to construct an asymmetric supercapacitor, displaying an energy density of up to 34.13 Wh kg⁻¹ and demonstrating good predisposition towards practical applications. This work presents an effective approach to fabricate and use hollow nickel/cobalt molybdate rods with O-defects as pseudocapacitor material for high-performance capacitive energy storage devices.     

Anion-exchange separation of iron,cobalt and nickel

From 90% acetone-10% 6 M hydrochloric acid medium, cobalt and nickel are strongly adsorbed on the anion-exchange resin Dowex I-X8; iron is not adsorbed and can thus be separated from cobalt and nickel. Cobalt and nickel are then separated by elution with 70% acetone-30% 2 M hydrochloric acid; nickel is eluted before cobalt. The method can be applied to the determination of nickel and cobalt in materials with high iron content such as steels ; compleximetric titrations are used for the final step.     

Preconcentration of nickel and cobalt on algae and determination by slurry graphite-furnace atomic-absorption spectrometry

Unicellular green algae have been utilized to preconcentrate Ni(2+) and Co(2+) ions from sea-water and riverine water samples. Studies have shown that rinsing the algae with 0.12M hydrochloric acid improves the adsorption of nickel and cobalt, and the optimum range of pH of extraction is wide. The maximum extraction efficiencies were 84 and 73% for Ni and Co, respectively, at ng/ml levels. The sea-water matrix and relatively small amounts of many impurities reduce the adsorption efficiency for both nickel and cobalt. The preconcentration is achieved by mixing 6 mg of algae with 50-100 ml of sample, and subsequently isolating the algae by centrifugation. The pellet of algae is then resuspended in 1 ml of 0.08M nitric acid, and analyzed as a slurry by graphite-furnace atomic-absorption spectrometry. The values found for nickel and cobalt in riverine (SLRS-1) and sea-water (CASS-1) standard reference materials are within the limits of certification.     

Assessment of differential-pulse adsorption voltammetry for the simultaneous determination of nickel and cobalt in biological materials

An assessment of the voltammetric method based on chelate adsorption at the hanging mercury drop electrode is described for the simultaneous determination of nickel and cobalt in biological materials. The interfacial accumulation of the elements as metal dimethylglyoximates during the adsorption step, and the use of differential-pulse voltammetry during the reduction step, provide substantial gains in the sensitivity of their voltammetric responses. The decomposition of the sample material by direct dry ashing provides a blank-free approach for the accurate determination of the elements. Application of the method to the available certified biological reference materials for cobalt and nickel was successful. The limits of detection obtained under the conditions of this study were 0.01 μg g^?1 and 0.02 μg g^?1 for cobalt and nickel, respectively, in bovine liver.     

Nickel Hydroxide Supercapacitor with a Theoretical Capacitance and High Rate Capability Based on Hollow Dendritic 3D‐Nickel Current Collectors

A straightforward way to attain the theoretical capacitance and high rate capability of nickel hydroxide supercapacitors, by utilizing a mesoporous hollow dendritic three‐dimensional‐nickel (3D‐Ni) current collector is proposed. A facile electrodeposition method employing a hydrogen bubble template was chosen for rapid fabrication of the dendritic 3D‐nickel structure. After nickel hydroxide was deposited on the hollow 3D‐nickel current collector, it exhibited a highest capacitance of 3637 F g⁻¹ at a current density of 1 A g⁻¹, and retained 97 % of capacitance at a high current density of 100 A g⁻¹ with a cycle stability of over 80 % after 10 000 cycles. The enhanced performance could be attributed to the large surface area and high conductivity of the moss‐like dendritic 3D‐Ni current collector, which allowed direct contact between the active materials and the current collector, and reduced diffusion resistance between the surface of the active materials and the electrolyte. These results not only confirmed a facile fabrication method for high‐performance 3D metal nanostructures, but also offer a promising solution for state‐of‐the‐art energy storage systems.     

Surface modification by graphene oxide:An efficient strategy to improve the performance of activated carbon based supercapacitors

An efficient and cost-effective strategy to modificate the surface of active carbon (AC), form a 3D-conductive network, and therefore improve the electrochemical performance of AC based supercapacitor was developed.