Monitoring the transformation of colloidal crystals by styrene vapor using atomic force microscopy

The stages of transformation of a colloidal crystalline film of latex spheres to a new periodic structure were imaged by atomic force microscopy. Colloidal crystalline films were prepared with 320 nm diameter poly(styrene-co-2-hydroxyethyl methacrylate) (PSt/HEMA) spheres. The hexagonally ordered surfaces of the colloidal crystalline films were transformed with styrene vapor at room temperature to a new morphology having holes in the surface and the same periodicity as the original films. The surfaces of colloidal crystals and the transformed films have a raspberry-like texture superposed on the 320 nm hexagonal periodicity. Both height images and phase images reveal that the latex spheres shrink and the transformation proceeds by an order-disorder-order sequence. The final structure is an interconnected colloidal array with smaller polystyrene particles dispersed in a continuous PSt/HEMA matrix.     

Drying dissipative structures of thermo-sensitive gel spheres of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) with low degree of cross-linking

Drying dissipative patterns of deionized suspensions (colloidal crystal state at high concentrations) of the thermo-sensitive gels of poly(N-isopropylacrylamide) with low degree of cross-linking of 0.5% (318 nm and 116 nm in the hydrodynamic diameter at 25 °C and 45 °C) were observed at 20 °C and 45 °C on a cover glass, a watch glass and a Petri glass dish. The broad rings were observed and their size decreased as micro-gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed. This work clarified the formation of the drying microscopic structures of (a) flickering ordered spoke-lines, (b) ordered rings, (c) net structure, and finally (d) lattice-like ordered structures of the agglomerated particles. The net and lattice structures formed more favorably at higher temperatures and/or higher degree of cross-linking of the gels. Importance of the convectional flow of the agglomerated particles during the drying processes is supported for the ordered array formation. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are also important for the ordering. The microscopic drying patterns of gel spheres were quite different from those of linear-type polymers and also from typical colloidal spheres, though the macroscopic patterns such as broad ring formation at the edges of the dried film were similar to each other.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Simulation-aided design and synthesis of hierarchically porous membranes

Free-standing silica membranes with hierarchical porosity (ca. 300 nm macropores surrounded by 6-8 nm mesopores) and controllable mesopore architecture were prepared by a dual-templating method, with the structural design aided by mesoscale simulation. To create a two-dimensional, hexagonal macropore array, polymeric colloidal hemisphere arrays were synthesized by a two-step annealing process starting with non-close-packed polystyrene sphere arrays on silicon coated with a sacrificial alumina layer. A silica precursor containing a poly(ethylene) oxide-poly(propylene oxide)-poly(ethylene) oxide (PEO-PPO-PEO) triblock-copolymer surfactant as template for mesopore creation was spin-coated onto the support and aged and then converted into the free-standing membranes by dissolving both templates and the alumina layer. To test the hypothesis that the mesopore architecture may be influenced by confinement of the surfactant-containing precursor solution in the colloidal array and by its interactions with the polymeric colloids, the system was studied theoretically by dissipative particle dynamics (DPD) simulations and experimentally by examining the pore structures of silica membranes via electron microscopy. The DPD simulations demonstrated that, while only tilted columnar structure can be formed through tuning the interaction with the substrate, perfect alignment of 2D hexagonal micelles perpendicular to the plane of the membrane is achievable by confinement between parallel walls that interact preferentially with the hydrophilic components (PEO blocks, silicate, and solvent). The simulations predicted that this alignment could be maintained across a span of up to 10 columns of micelles, the same length scale defined by the colloidal array. In the actual membranes, we manipulated the mesopore alignment by tuning the solvent polarity relative to the polar surface characteristics of the colloidal hemispheres. With methanol as a solvent, columnar mesopores parallel to the substrate were observed; with a methanol-water mixed solvent, individual spherical mesopores were present; and with water as the only solvent, twisted columnar structures were seen.     

Preparation and optical properties of novel bioactive photonic crystals obtained from core-shell poly(styrene/α-<Emphasis Type="Italic">tert</Emphasis>-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Optical properties of polymer microspheres with polystyrene cores and polyglycidol-enriched shells poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGL) particles with number average diameters D _n determined by scanning electron microscopy equal 237 and 271 nm), were studied before and after immobilization of ovalbumin. The particles were synthesized by emulsifier-free emulsion copolymerization of styrene and polyglycidol macromonomer (poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol)) initiated with potassium persulfate. Molar fraction of polyglycidol units in the interfacial layer of the microspheres determined by XPS was equal 42.6 and 34.0%, for the particles with D _n equal 137 and 271 nm, respectively. Colloidal crystals from the aforementioned particles were prepared by deposition of particle suspensions on the glass slides and subsequent evaporation of water. It was found that optical properties of colloidal crystals from the P(S/PGL) microspheres strongly depend on modification of their interfacial layer by covalent immobilization of ovalbumin. The coating of particles with ovalbumin resulted in decreasing their refractive index from 1.58 to 1.52.     

From colloidal Co/CoO core/shell nanoparticles to arrays of metallic nanomagnets: surface modification and magnetic properties.

The magnetic properties of nanoparticles can be subject to strong variations as the chemical composition of the particle surface is modified. To study this interrelation of surface chemistry and magnetism, self-assembled layers of colloidal 9.5 nm Co/CoO core/shell nanoparticles were exposed to mild reactive hydrogen and oxygen plasmas. The consecutive oxygen/hydrogen plasma treatment transforms the particle layer into an array of metallic nanomagnets with complete reduction of the oxide and removal of the organic surfactants. The original arrangement of the particle array and the number of Co atoms per particle remains unchanged within the experimental error, and thus this is a possible route for the fabrication of ultrahigh-density magnetic bit structures from colloidal dispersions. The magnetic properties can be tuned by controlling the thickness of the surface oxide layer, which magnetically hardens the particles, as evidenced by element-specific magnetic hysteresis loops.     

Synthesis of poly(vinyl acetate)-b-poly(4-vinylpyridine) block copolymers by a combination of cobalt-mediated radical polymerization and RAFT polymerization and their use in dispersion polymerization under UV radiation

Well-defined poly(vinyl acetate)-block-poly(4-vinylpyridine) (PVAc-b-P4VP) block copolymers were synthesized for the first time by a combination of cobalt-mediated radical polymerization (CMRP) and reversible addition–fragmentation chain transfer (RAFT) polymerization, and were used to prepare PVAc-b-P4VP hairy polystyrene (PSt) particles. PVAc end-capped by a cobalt(II) acetylacetonate complex was first synthesized by the CMRP of vinyl acetate, after which the cobalt complex was modified into a dithiobenzoate group for the RAFT polymerization of 4-vinylpyridine. The hairy PSt particles were synthesized by the dispersion polymerization of St using the PVAc-b-P4VP as both a macro-initiator and a colloidal stabilizer under UV radiation. The average size of PSt particles synthesized with 20 wt.% of PVAc-b-P4VP (M _n = 39,500 g/mol) was 136 nm (CV = 19.2%). Very small Au nanoparticles were successfully immobilized on the surface of the PSt particles.     

Formation of microstructured silicon surfaces by electrochemical etching using colloidal crystal as mask

Silicon disk arrays and silicon pillar arrays with a close-packed configuration having an ordered periodicity were fabricated by the electrochemical etching of a silicon substrate through colloidal crystals used as a mask. The colloidal crystals were directly prepared by the self-assembly of polystyrene particles on a silicon substrate. The transfer of a two-dimensional hexagonal array of colloidal crystals to the silicon substrate could be achieved by the selective electrochemical etching of the exposed silicon surfaces, which were located in interspaces among adjacent particles. The diameter of the tip of the silicon pillars could be controlled easily by changing the anodization conditions, such as current density and period of electrochemical etching.     

Synthesis and aggregation study of tin nanoparticles and colloids obtained by chemical liquid deposition

Tin colloids (Sn-Colls) and nanoparticles were synthesized by a chemical liquid deposition method (CLD). Sn⁰ was evaporated and codeposited with acetone, 2-propanol, and tetrahydrofurane vapors at 77 K to obtain colloidal dispersions. Sn-Coll were characterized by UV spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy, selected area electron diffraction, thermal analysis, infrared spectroscopy [Fourier transform infrared (FTIR)], and light scattering. TEM micrographs of tin nanoparticles (Sn-Nps) revealed a particle size distribution between 2 and 4 nm for the three solvents used in the synthesis. UV studies showed strong absorption bands in the UV region, suggesting that the Sn-Nps obtained by CLD exhibit quantum confinement and typical bands of plasmons corresponded to aggregated particles. Electrophoresis measurement indicated a significant tendency of particle aggregation along time, which was verified by light scattering studies. The diffraction patterns revealed phases corresponding to metallic tin and FTIR studies showed the interaction Sn-solvent in the metal surface by Sn-O bonds, indicating a solvatation of metallic clusters. Thermal analysis revealed a good thermal stability of Sn-Nps. The mechanism of tin nanoparticles formation was also examined.     

Preparation of a colloidal array of NaTaO3 nanoparticles via a confined space synthesis route and its photocatalytic application

The confined space synthesis method has been applied to the preparation of sodium tantalate (NaTaO(3)); hydrothermal reaction of NaOH and Ta(2)O(5) was carried out in the pores of a three-dimensional mesoporous carbon, which was replicated by the colloidal array of silica nanospheres (SNSs) 20 nm in size. This approach led to the formation of a colloidal array of NaTaO(3) nanoparticles 20 nm in size with a surface area of 34 m(2) g(-1). The photocatalytic performance of the colloidal array of NaTaO(3) nanoparticles for overall water splitting under UV irradiation (λ > 200 nm) was evaluated after loading a NiO cocatalyst onto NaTaO(3) samples. The NiO-loaded NaTaO(3) nanoparticles showed photocatalytic activity for overall water splitting more than three times as high as non-structured bulk NaTaO(3) particles.     

Synthesis of Highly Charged, Monodisperse Polystyrene Colloidal Particles for the Fabrication of Photonic Crystals

We have developed a series of emulsion polymerization recipes for the synthesis of highly charged, monodisperse polystyrene colloids of diameters between 100-400 nm. These spherical colloidal particles were crosslinked with divinyl benzene and functionalized with 1-allyloxy-2-hydroxypropane sulfonate. These highly charged, monodisperse colloidal particles readily self-assemble into robust three-dimensionally ordered crystalline colloidal arrays (CCAs). These CCAs operate as photonic crystals that Bragg diffract light in the ultraviolet, visible, and infrared regions of the spectrum. Copyright 2000 Academic Press.     

Preparation of monodisperse ellipsoidal polystyrene particles

A method is described for the preparation of monodisperse ellipsoidal particles of polystyrene in the colloidal size range. Monodisperse polystyrene particles were dispersed in a solution of polyvinyl alcohol. This dispersion was then allowed to form, by evaporation, a thin film of polyvinyl alcohol containing spherical polystyrene particles. Strips of this film were clamped into a metal frame, heated rapidly in an oil bath to 200°C and stretched to a predetermined extent in order to convert the spherical particles into ellipsoids; the film was then cooled. A wide range of axial ratios for a variety of initial particle sizes was obtained by this method.     

Preparation of silica/perfluoroalkyl methacrylate polymer inorganic/organic particles in supercritical carbon dioxide

Silica/perfluoroalkyl methacrylate polymer (PHDFDMA) particles were prepared using various types of silica by polymerization in supercritical carbon dioxide. There are three steps in the fabrication of inorganic/organic hybrid composites: silane treatment, polymerization, and soxhlet extraction. After these steps, we observed the morphology of silica/PHDFDMA particles using field emission scanning electron microscope and transmission electron microscope. From these analyses, we can confirm that the silica/PHDFDMA core/shell particles were obtained when we used Ludox and silica gel as a silica template. On the other hand, core/shell particles were not formed when using fused silica and precipitated silica. In addition, to confirm the amount of polymer on silica, we performed an analysis using thermogravimetric analysis and electron probe micro-analyzer. In this case, PHDFDMA was approximately 20 wt.% on the silica gel and 40 wt.% on the Ludox, respectively. When using fused silica and precipitated silica as a template, amount of PHDFDMA on silica was maximum 5 wt.% and over 40 wt.%, respectively. From these results, to obtain enough PHDFDMA encapsulated silica particle, colloidal silica, Ludox is the best template in four different types of silica.     

聚合结晶化胶体阵列结构的压敏光响应性质

制备了由单分散聚苯乙烯微球构成的结晶化胶体阵列结构, 并制备了结晶化胶体阵列聚丙烯酰胺水凝胶薄膜. 通过微区反射光谱研究了其光子带隙位置随外加压力的变化规律. 实验结果表明, 该薄膜在垂直表面方向存在光子带隙, 并在一定载荷范围内带隙波长随外加压力呈可逆线性变化.     

A combined electrochemical route to fabricate large-area and free-standing inverse opaline film

A combined electrochemical route involving electrophoresis and electrodeposition is developed to fabricate a large-area unsupported nickel inverse opaline film with thickness less than 10 μm. A vertical electrophoresis allows for the packing of 495 nm polystyrene microspheres on an ITO-coated glass to form a colloidal crystal with significantly reduced defects. Subsequently, a nickel electrodeposition is employed to fill the interstitial voids among the close-packed polystyrene microspheres, followed by the removal of the colloidal template in a two-stage process, leaving a robust nickel skeleton with hexagonally arranged pores and interconnected pore channels. This nickel skeleton is then detached from the ITO-coated glass via a liquid nitrogen treatment, rendering a free-standing nickel inverse opaline film in 2 × 2 cm². Porometer measurements indicate a narrow pore size distribution consistent with images from scanning electron microscope. We determine that the intensity ratio of (111)/(100) diffraction peak is an indicator for the strength of the Ni inverse opals, and thus affects its structural integrity upon detachment from the ITO-coated glass.     

Surface-enhanced Raman studies of bradykinin using colloidal gold

In this paper, bradykinin (BK), an endogenous peptide hormone, which is involved in a number of physiological and pathophysiological processes was deposited onto the colloidal Au nanoparticles. The surface-enhanced Raman spectroscopy (SERS) was used to determine the adsorption mode of BK under different environmental conditions, including: excitation wavelengths (514.5 nm and 785.0 nm), pH of aqueous sol solutions (from pH = 3 to pH = 11), and size of the colloidal nanoparticles (10, 20, and 50 nm). The metal surface plasmon of the colloidal suspended Au nanoparticles was examined by ultraviolet-visible (UV–vis) spectroscopy. The results showed that the C-terminal part of BK plays a crucial role in the adsorption process onto the colloidal suspended Au particles. The Phe^5/8 and Arg⁹ residues of BK mainly participate in the interactions with the colloidal Au nanoparticles. At acidic pH of the solution (pH = 3), the BK COO⁻ terminal group through the both oxygen atoms strongly binds to the Au nanoparticles. The Phe⁵/Phe⁸ rings adopt tilted orientation with respect to the colloidal Au nanoparticles with diameters of 10 and 20 nm. As the particle size increases to 50 nm, the flat orientation of the Phe ring(s) with respect to the Au nanoparticles is observed.     

Fabrication of monodisperse asymmetric colloidal clusters by using contact area lithography (CAL)

We report a new fabrication method of asymmetric colloidal clusters by using contact area lithography with site-selective growth. Nanometric surface patterns (approximately 44, 60, and 81 nm in diameter) were prepared by coating surfaces with self-assembled monolayers (SAMs; octadecyltrichlorosilane (OTS) in this study) except the contact area either between colloidal particles or between colloids and substrate. Nanoscale site-specific heterogeneous nucleation and growth of oxide materials of titanium were studied using the patterns of OTS-SAMs onto the either flat or curved surfaces of SiO2. Experimental results suggest that a combination of the large difference in the surface energy between the growing and surrounding surfaces and the diffusion-controlled growth leads to complete nanoscale site specificity. We also fabricated superstructrures of silica spheres with hemispheres of titania (<20 nm in dimension) on their surfaces and discussed the optical properties of colloidal films consisting of the monodisperse asymmetric colloidal clusters in terms of photonic band gap.     

Production and structural characterization of crystalline silver nanoparticles from Bacillus cereus isolate

To date, biosynthesis of metal nanoparticles has been intensively studied using bacteria and fungi. We have isolated and identified metal resistant bacterial strains from electroplating industries, they produce silver nanoparticles. The reduction reaction of aqueous silver nitrate with bacterial biomass was carried out for 120 h. Bacteria produced metallic nanoparticles showed a strong absorbance at surface plasmon resonance wavelength around 420 nm. The size and morphology of these nanoparticles were typically imaged using high resolution transmission electron microscopy, the particles size ranges between 4 and 5 nm and are spherical in shape. The crystal structure of the particles was characterized by X-ray diffraction pattern. The full width half maxima from X-ray diffraction measurements indicated that the particles exhibited face-centered cubic phase.     

Close-packed colloidal crystalline arrays composed of polystyrene latex coated with titania nanosheets

We have demonstrated that polystyrene latex coated with titania nanosheets can be fabricated into a close-packed colloidal crystalline array, and that these coated colloidal spheres can be used to control the peak position of optical stop bands through the coating. The titania-nanosheets-coated polystyrene latex was prepared by the layer-by-layer (LBL) assembly coating process, involving alternating lamination of cationic polyelectrolytes and anionic titania nanosheets on monodisperse polystyrene latex particles. The Bragg diffraction peak of the colloidal crystalline array shifted to longer wavelengths with the coating of titania nanosheets. This red shift was caused by an increase in refractive index upon coating, as revealed by angle-resolved reflection spectra measurements. The current work suggests new possibilities for the creation of advanced colloidal crystals having tunable optical properties from tailored colloidal spheres.     

Measurement of Colloidal Stability in Solutions of Simple, Nonadsorbing Polyelectrolytes

The stability of a solution of charged polystyrene particles in the presence of nonadsorbing polyelectrolyte macromolecules is measured using optical light scattering. The particles were negatively charged polystyrene latex spheres (0.5–1 μm diameter) while the macromolecules were simulated using negatively charged colloidal silica spheres (5–7 nm diameter). Because of the electrostatic repulsion between the particles, the solution is found to be stable against primary flocculation (irreversible flocculation into a primary energy minima). However, because of long-range attractive depletion forces, reversible secondary flocculation of the particles occurs into a local potential energy minimum. As observed with uncharged macromolecules, the polyelectrolyte first induces flocculation at a critical flocculation concentration (v*), but later restabilizes the system at a critical restabilization concentration (v**). These critical concentrations are found to decrease with decreasing macromolecule size and increasing particle size. The restabilized solutions are found to remain suspended for periods greater than 20 days. Comparison of the measured flocculation and restabilization results to predictions made using a recently developed force-balance model show qualitative agreement.