Enhancement of ethanol electrooxidation on plasmonic Au/TiO2 nanotube arrays

Novel electrocatalysts Au/TiO₂ nanotube arrays (Au/TiO₂NTs) were prepared by loading low-content(1.9 at.%) of Au nanoparticles (AuNPs) onto highly ordered TiO₂ nanotube arrays (TiO₂NTs). Ethanol electrooxidation indicates that visible-light (λ > 400 nm) irradiation can significantly enhance the activity as well as resistpoisoning of Au/TiO₂NTs electrocatalysts that are activated by plasmon resonance. Au/TiO₂NTs catalysts calcinated at 300 °C display the highest performance due to the strong synergistic interactions between TiO₂ and Au NPs. The combination of visible-light irradiation with a controllable potential offers a new strategyfor enhancing the performance of anodes in direct ethanol fuel cell (DEFC).     

Quenching of TiO2 photo catalysis by silver nanoparticles

The plasmon resonance of metal nanostructures affects neighboring semiconductors, quenching or enhancing optical transitions depending on various parameters. These plasmonic properties are currently investigated with respect to topics such as photovoltaics and optical detection and could also have important consequences for photocatalysis. Here the effect of silver nanoparticles of a size up to 30 nm and at maximum 0.50 monolayers on the photocatalytic oxidation of ethylene on TiO₂ is studied. Since the plasmon resonance energy of silver nanoparticles is comparable with the TiO₂ band gap, dipole-dipole interaction converts excitons into heat at the silver nanoparticle. This indicates that plasmonic interaction with TiO₂ semiconductor catalysts can reduce the photo catalytic activity considerably.     

Fabrication and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst ZnTe/TiO2 nanotube arrays

A new ZnTe modified TiO₂ nanotube (NT) array catalyst was prepared by pulse potential electrodeposition of ZnTe nanoparticles (NPs) onto TiO₂ NT arrays, and its application for photocatalytic degradation of anthracene-9-carboxylic acid (9-AnCOOH) was investigated. The even distribution of ZnTe NPs was well-proportionately grown on the top surface of the TiO₂ NT while without clogging the tube entrances. Compared with the unmodified TiO₂ NT, the ZnTe modified TiO₂ NT (ZnTe/TiO₂ NT) showed significantly enhanced photocatalytic activity towards 9-AnCOOH under simulated solar light. After 70 min of irradiation, 9-AnCOOH was degraded with the removal ratio of 45% on the bare TiO₂ NT, much lower than 80%, 90%, and 100% on the ZnTe/TiO₂ NT with the ZnTe NPs prepared under the pulsed “on” potentials of −0.8, −1.0, and −2.0 V, respectively. The increased photodegradation efficiency mainly results from the improved photocurrent density as results of enhanced visible-light absorption and decreased hole-electron recombination due to the presence of narrow-band-gap p-type semiconductor ZnTe.     

Synthesis of Au/SnO2 core-shell structure nanoparticles by a microwave-assisted method and their optical properties

Au/SnO₂ core-shell structure nanoparticles were synthesized using the microwave hydrothermal method. The optical and morphological properties of these particles were examined and compared with those obtained by the conventional hydrothermal method. In microwave preparation, the peak position of the UV-visible plasmon absorption band of Au nanoparticles was red-shifted from 520 to 543 nm, due to the formation of an SnO₂ shell. An SnO₂ shell formation was complete within 5 min. The thickness of the SnO₂ shell was 10-12 nm, and the primary particle size of SnO₂ crystallites was 3-5 nm. For the core-shell particles prepared by a conventional hydrothermal method, the shell formed over the entire synthesis period and was not as crystalline as those produced, using the microwave method. The relationship between the morphological and spectroscopic properties and the crystallinity of the SnO₂ shell are discussed.     

高热稳定性纳米Au/TiO2催化剂的制备与表征

 采用三嵌段共聚物聚乙醚-聚丙醚-聚乙醚EO20PO70EO20 (P123)为有机模板剂合成了介孔TiO2载体,用沉积-沉淀法制得Au/TiO2催化剂. 运用N2 吸附-脱附、 X射线衍射、 X射线光电子能谱和高分辨电镜技术对催化剂的结构与形貌进行了表征. 采用P123模板剂合成的TiO2具有较均匀的介孔结构,孔径集中在6.1 nm附近,负载金后,其介孔结构保持良好,但孔径下降至5.4 nm. 400 ℃焙烧后,介孔TiO2负载的Au催化剂中Au主要以金属态存在. 负载在三种TiO2载体(介孔TiO2、溶胶-凝胶法合成的TiO2和工业TiO2)上的Au晶粒大小和分散度差异较大,其中介孔TiO2载体更有利于金的分散,以该载体制备的催化剂400 ℃焙烧后金的晶粒尺寸在1～5 nm范围内,催化剂显示了很好的CO氧化活性和抗热稳定性,即使在420 ℃焙烧,其室温下CO的转化率也在90%以上. 而溶胶-凝胶法制备的TiO2和工业TiO2负载的纳米金催化剂中,金晶粒尺寸约为10 nm,催化剂的CO氧化活性和抗热稳定性较差.     

Preparation and photocatalytic activity of ZnO/TiO2/SnO2 mixture

ZnO/TiO₂/SnO₂ mixture was prepared by mixing its component solid oxides ZnO, TiO₂ and SnO₂ in the molar ratio of 4?1?1, followed by calcining the solid mixture at 200-1300 °C. The products and solid-state reaction process during the calcinations were characterized with powder X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG-DTA), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS) and Brunauer-Emmett-Teller measurement of specific surface area. Neither solid-state reaction nor change of crystal phase composition took place among the ZnO, TiO₂ and SnO₂ powders on the calcinations up to 600 °C. However, formation of the inverse spinel Zn₂TiO₄ and Zn₂SnO₄ was detected at 700-900 and 1100-1200 °C, respectively. Further increase of the calcination temperature enabled the mixture to form a single-phase solid solution Zn₂Ti_0.5Sn_0.5O₄ with an inverse spinel structure in the space group of . The ZnO/TiO₂/SnO₂ mixture was photocatalytically active for the degradation of methyl orange in water; its photocatalytic mass activity was 16.4 times that of SnO₂, 2.0 times that of TiO₂, and 0.92 times that of ZnO after calcination at 500 °C for 2 h. But, the mass activity of the mixture decreased with increasing the calcination temperature at above 700 °C because of the formation of the photoinactive Zn₂TiO₄, Zn₂SnO₄ and Zn₂Ti_0.5Sn_0.5O₄. The sample became completely inert for the photocatalysis after prolonged calcination at 1300 °C (42 h), since all of the active component oxides were reacted to form the solid solution Zn₂Ti_0.5Sn_0.5O₄ with no photocatalytic activity.     

Photoinduced interactions between colloidal TiO2 nanoparticles and calf thymus-DNA

The interaction of colloidal TiO₂ nanoparticles with calf thymus-DNA was studied by using absorption, FT-IR, steady state and time resolved fluorescence spectroscopic techniques. The apparent association constant has been deduced (K_app = 2.85 × 10³ M⁻¹) from the absorption spectral changes of the DNA-colloidal TiO₂ nanoparticles using the Benesi–Hildebrand equation. Addition of colloidal TiO₂ nanoparticles quenched the fluorescence of EtBr–DNA. The number of binding sites (n = 0.97) and the apparent binding constant (K = 6.68 × 10³ M⁻¹) were calculated from relevant fluorescence quenching data. The quenching, through a static mechanism, was confirmed by time resolved fluorescence spectroscopy.     

Low temperature CO oxidation on Au/TiO2 sol-gel catalysts

A comparative study on Au/TiO₂catalysts prepared by impregnation with HAuCl₄of commercial TiO₂ or by impregnation of sol-gel derived TiO₂has been carried out during CO oxidation. Specific surface areas and mean Au particle of 49 and 74 m²/g and 35 and 25 Å were obtained for impregnated commercial TiO₂ and sol-gel preparations, respectively. XRD patterns shown that in sol-gel derived TiO₂ only anatase phase was identified, while in commercial TiO₂ anatase and rutile phases co-exist. Titania support effect on Au activity for the oxidation of CO has been observed. The light-off during the reaction on Au/TiO₂initiates at 50°C, whereas for commercial impregnated TiO₂ catalyst the light-off initiates at 200°C.     

Dependence of nitrogen doping on TiO2 precursor annealed under NH3 flow

N-doped TiO₂ photocatalysts were prepared by annealing two different precursors, P25 and a TiO₂ xerogel powder under NH₃/Ar flow at 500, 550, and 600 °C. The xerogel powder prepared by peptizing Ti(OH)₄ with HNO₃ was composed of nanoparticles and had large specific surface area. During the annealing process, the xerogel powder underwent increase in crystallinity, grain growth and phase transformation, whereas P25 did not show obvious changes. Compared with the N-doped TiO₂ photocatalysts from P25, the N-doped TiO₂ photocatalysts from the xerogel powder possessed higher concentrations of the substitutional nitrogen and exhibited more obvious absorption in the visible light region. The N-doped TiO₂ photocatalysts from the xerogel powder exhibited obvious visible-light activities for photodegrading methylene blue and the sample prepared at 500 °C achieved the best performance with a rate constant (k) about 0.44 h⁻¹, whereas those from P25 did not exhibit improved visible-light activities.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

Syntheses of TiO2(B) nanowires and TiO2 anatase nanowires by hydrothermal and post-heat treatments

TiO₂(B) nanowires and TiO₂ anatase nanowires were synthesized by the hydrothermal processing in 10 M NaOH aq. at 150 °C followed by the post-heat treatment at 300-800 °C. As-synthesized Na-free titanate nanowires (prepared by the hydrothermal treatment and repeated ion exchanging by HCl (aq.) were transformed into TiO₂(B) structure with maintaining 1-D morphology at 300-500 °C, and further transformed into anatase structure at 600-800 °C with keeping 1-D shape. At 900 °C, they transformed into rod-shaped rutile grains. Microstructure of these 1-D TiO₂ nanomaterials is reported.     

Water Detoxification: Photocatalytic Decomposition of Phenol on Au/TiO2

 Photodeposition of gold on TiO₂ was conducted in situ in the photoreactor used for the reaction of phenol photodestruction. The Au/TiO₂ system shows better photocatalytic properties in the destruction of phenol contaminants in water than pure TiO₂. The gold cocatalyst prevents also the decrease of the rate of the photocatalytic reaction at higher phenol concentration observed for pure TiO₂. Hydroquinone, p-benzoquinone, and catechol are main intermediates of the photoreaction, which finally leads to total phenol mineralization.     

Preparation and characterization of SiO2/TiO2 composite microspheres with microporous SiO2 core/mesoporous TiO2 shell

SiO₂/TiO₂ composite microspheres with microporous SiO₂ core/mesoporous TiO₂ shell structures were prepared by hydrolysis of titanium tetrabutylorthotitanate (TTBT) in the presence of microporous silica microspheres using hydroxypropyl cellulose (HPC) as a surface esterification agent and porous template, and then dried and calcined at different temperatures. The as-prepared products were characterized with differential thermal analysis and thermogravimetric (DTA/TG), scanning electron microscopy (SEM), X-ray diffraction (XRD), nitrogen adsorption. The results showed that composite particles were about 1.8 μm in diameter, and had a spherical morphology and a narrow size distribution. Uniform mesoporous titania coatings on the surfaces of microporous silica microspheres could be obtained by adjusting the HPC concentration to an optimal concentration of about 3.2 mmol L⁻¹. The anatase and rutile phase in the SiO₂/TiO₂ composite microspheres began to form at 700 and 900 °C, respectively. At 700 °C, the specific surface area and pore volume of the SiO₂/TiO₂ composite microspheres were 552 and 0.652 mL g⁻¹, respectively. However, at 900 °C, the specific surface area and pore volume significantly decreased due to the phase transformation from anatase to rutile.     

Preparation and electrorheological properties of triethanolamine-modified TiO2

The high molecular dielectric dipole moment of doping material is promising to improve the electrorholegical (ER) effect. It is found that triethanolamine (the molecular dipole moment of triethanolamine is 3.48)-modified TiO₂ has good ER properties. Under 5 kV/mm external electric field, the yield stress is 32.6 kPa, which is about 50 times higher than that of pure TiO₂ and the leaking electric current density is lower than 16 μA/cm². The sedimentation rate is about 98% in 20 days.     

Structural characterization and photocatalytic activity of hollow binary ZrO2/TiO2 oxide fibers

The formation of hollow binary ZrO₂/TiO₂ oxide fibers using mixed precursor solutions was achieved by activated carbon fibers templating technique combined with solvothermal process. The samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N₂ adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis, and infrared (IR) spectroscopy. The binary oxide system shows the anatase-type TiO₂ and tetragonal phase of ZrO₂, and the introduction of ZrO₂ notably inhibits the growth of TiO₂ nanocrystallites. Although calcined at 575 °C, all hollow ZrO₂/TiO₂ fibers exhibit higher surface areas (>113 m²/g) than pure TiO₂ hollow fibers. The Pyridine adsorption on ZrO₂/TiO₂ sample indicates the presence of stronger surface acid sites. Such properties bring about that the binary oxide system possesses higher efficiency and durable activity stability for photodegradation of gaseous ethylene and trichloromethane than P25 TiO₂. In addition, the macroscopic felt form for the resulting materials is more beneficial for practical applications than traditional catalysts forms.     

A one-pot synthetic approach to prepare palladium nanoparticles embedded hierarchically porous TiO2 hollow spheres for hydrogen peroxide sensing

A simple one-step method to fabricate hierarchically porous TiO₂/Pd composite hollow spheres without any template was developed by using solvothermal treatment. Pd nanoparticles (2-5 nm) were well dispersed in the mesopores of the TiO₂ hollow spheres via in-situ reduction. In our experiment, polyvinylpyrrolidone played an important role in the synthetic process as the reducing agent and the connective material between TiO₂ and Pd nanoparticles. HF species generated from solvothermal reaction leaded to the formation of TiO₂ hollow spheres and Ostwald ripening was another main factor that affected the size and structure of the hollow spheres. The as-prepared TiO₂/Pd composite hollow spheres exhibited high electrocatalytic activity towards the reduction of H₂O₂. The sensitivity was about 226.72 μA mM⁻¹ cm⁻² with a detection limit of 3.81 μM at a signal-to-noise ratio of 3. These results made the hierarchically porous TiO₂/Pd composite a promising platform for fabricating new nonenzymic biosensors.     

Synthesis of titanate, TiO2 (B), and anatase TiO2 nanofibers from natural rutile sand

Titanate nanofibers were synthesized by hydrothermal method (150 °C for 72 h) using natural rutile sand as the starting materials. TiO₂ (B) and anatase TiO₂ (high crystallinity) nanofibers with the diameters of 20-100 nm and the lengths of 10-100 μm were obtained by calcined titanate nanofibers for 4 h at 400 and 700 °C (in air), respectively. The samples characterized by XRD, SEM, TEM, SAED, HRTEM, and BET surface area. This synthesis method provides a simple route to fabricate one-dimensional nanostructured TiO₂ from low cost material.     

High activity of novel Pd/TiO2 nanotube catalysts for methanol electro-oxidation

Electro-oxidation of methanol in sulfuric acid solution was studied using palladium well-dispersed on titanium nanotubes, in relation to methanol oxidation processes in the direct oxidation methanol fuel cell. Pd dispersed on titania nanotubes, which leads to high surface area substrates, showed excellent catalytic activities compared to those of pure Pd and Pd-TiO₂ nanoparticles. TEM results show a narrow distribution of TiO₂ nanoparticles whose particle size is about 10 nm, and uniform nano-sized TiO₂ nanotubes with 10 nm in diameters are seen from HRTEM . A homogeneous structure in the composite nanomaterials is indicated by XRD analysis. The composite electrode activities were measured by cyclic voltammetry (CV) and at 25 °C it was found that 3 wt% Pd in titania nanotubes had the best activity for methanol oxidation.     

In situ radical polymerization of methyl methacrylate in a solution of surface modified TiO2 and nanoparticles

Surface modified TiO₂ nanoparticles dissolved in toluene were encapsulated in PMMA by in situ radical polymerization of methyl methacrylate initiated by 2,2′-azobisisobutyronitrile. The surface modification of the TiO₂ nanoparticles (average diameter of 4.5 nm) was achieved by the formation of a charge transfer complex between TiO₂ nanoparticles and 6-palmitate ascorbic acid. The surface modified TiO₂/nanoparticles were characterized using UV−Vis and FTIR spectroscopy, while the obtained polymer nanocomposites were characterized using reflection and ¹H NMR spectroscopy, as well as gel permeation chromatography. The influence of the TiO₂ nanoparticles on the thermal properties of the PMMA matrix was investigated using thermo-gravimetric analysis and differential scanning calorimetry. The glass transition temperature of the polymer was not influenced by the presence of the nanoparticles while the thermal stability was significantly improved.     

The role of TiO2 in the B2O3–Na2O–PbO–Al2O3 glass system

Optical and vibrational studies have been carried out on 60B₂O₃·(20−x)Na₂O·10PbO·10Al₂O₃:xTiO₂ (x=0, 1, 2, 3, 4, and 5 mol%) glasses, in order to understand the role of TiO₂ in the 60B₂O₃·20Na₂O·10PbO·10Al₂O₃ glass matrix. The X-ray patterns reveal homogeneous glasses over the entire compositional range. The absorption spectra show that the energy of the optical band gap (ΔE_opt) and Urbach's energy (E_U) decreases as TiO₂ content increases. The changes observed in the Raman and IR spectra are related to the BO₄→BO₃ back conversion effect and the appearance of “loose” BO₄⁻ groups. The data indicate that titanium ions act as a network modifier.