Solvent-free synthesis of dihydropyrimidinones catalyzed by alumina sulfuric acid at room temperature

A simple, efficient and practical procedure for the Biginelli reaction using alumina sulfuric acid (ASA) as a novel acid catalyst is described under solvent-free conditions. The catalyst exhibited remarkable reactivity at room temperature. The method offers several advantages including high yields, environmentally friendly procedure, short reaction times and simple work up procedure.     

Nanorod vanadatesulfuric acid (VSA NRs)-catalyzed green synthesis of hexahydroacridine-1,8-diones in solvent-free conditions

Nanorod vanadatesulfuric acid (VSA NRs), as a novel, recyclable and eco-benign catalyst, was used for an efficient synthesis of hexahydroacridine-1,8-diones using 1,3-cyclohexanedione derivatives, aldehydes and ammonium acetate or aniline under solvent-free conditions. VSA was prepared by the reaction of high-purity chlorosulfonic acid and sodium metavanadate. The present method offers some advantages over conventional ones, such as simple procedure and work-up, short reaction times, high yields, stability and reusability of the catalyst and simple purification of the products. Also, some greenness aspects of this method were investigated and compared with data from previous reports.     

Application of silica vanadic acid [SiO2-VO(OH)2] as a heterogeneous and recyclable catalyst for oxidative aromatization of Hantzsch 1,4-dihydropyridines at room temperature

A simple method for the oxidative aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is described using hydrogen peroxide as green oxidant and silica vanadic acid as catalyst in acetonitrile at room temperature. The catalyst can be easily recovered and reused for 15 reaction cycles without considerable loss of activity.     

Protic guanidinium ionic liquid as a green and highly efficient catalyst for the synthesis of functionalized spirochromenes under solvent-free conditions

A simple and efficient method for the synthesis of functionalized spirochromenes is explained using protic guanidinium ionic liquid as a catalyst under solvent-free conditions at room temperature. This procedure is simple, clean, and excellent yields are obtained in short reaction times.     

A Practical Iodination of Aromatic Compounds by Using Iodine and Iodic Acid

This article describes simple and efficient method for the iodination of different aromatic amines, hydroxy aromatic aldehydes, hydroxy acetophenones and phenols using iodine and iodic acid in ethanol as a solvent. Notable advantages include mild reaction condition, no need of catalyst, short reaction time, simple practical procedure, giving excellent yield of the product.     

SnCl2/nano SiO2：A green and reusable heterogeneous catalyst for the synthesis of polyfunctionalized 4H-pyrans

A highly efficient and general method for the synthesis of polyfunctionalized 4H-pyrans is established through a one-pot multicomponent cyclocondensation of aromatic aldehydes with CH acids, malononitrile and ethyl acetoacetate using nano silica supported tin (Ⅱ) chloride as a catalyst. In this method SnCl2/nano SiO2 was used as green and reusable catalyst. Excellent yields, short reaction times, simple workup, and inexpensiveness and commercially availability of the catalyst are the advantages of this method.     

Rapid,efficient and solvent-free synthesis of (un)symmetrical xanthenes catalyzed by recyclable sulfated polyborate

The present study describes a rapid, simple and straightforward approach to the synthesis of 1,8-dioxo-octahydroxanthenes, 14-phenyl-14H-dibenzo[a,j]xanthene and tetrahydrobenzoxanthene-11-ones under solvent-free conditions using sulfated polyborate as a highly efficient catalyst. The procedure offers several advantages including cleaner reaction profile, mild reaction condition, economic, recyclable and environmentally benign catalyst, high yields, simple experimental and workup procedures. While non-extractive work up/purification, along with reusability of catalyst make this method economically affordable for large scale.     

Convenient One‐Pot Heterogeneous Catalytic Method for the Preparation of 3,4‐Dihydropyrimidin‐2(1H)‐ones

A new, simple, environmentally friendly synthesis of dihydropyrimidinones from aromatic and aliphatic aldehydes, ethyl acetoacetate, and urea or thiourea using a small‐pore‐size zeolite as catalyst is described. Compared with the classical Biginelli reaction conditions, this method has the advantage of high yield, shorter reaction time, and recyclable and reusable catalyst.     

The SBA-15/SO3H nanoreactor as a highly efficient and reusable catalyst for diketene-based, four-component synthesis of polyhydroquinolines and dihydropyridines under neat conditions

An efficient diketene ring-opening synthesis of polyhydroquinoline derivatives using SBA-15 sulfonic acid modified mesoporous substrates a green and reusable catalyst in a single-pot four-component coupling reaction of diketene,alcohol,enamine,and aldehydes is reported.Dihydropyridine derivatives based on neat adduct of diketene,alcohols and aldehydes using SBA-15/SO₃H nanoreactor as catalyst via a four-component reactions are also synthesized.The advantages of the present method include the use of a small amount catalyst,simple procedure with an easy filterable work-up,waste-free,green and direct synthetic method with an excellent yield of products with efficient use of catalyst and a short reaction time.     

Perchloric Acid-Catalyzed Synthesis of 9-Aryl Xanthenes-9H-3,6-diol and 1,3,6,8-Tetraol in Water

Efficient syntheses of xanthenes have been described using a catalytic amount of perchloric acid in water. The high temperature and lengthy reaction time normally required for formation of xanthenes derivatives are not necessary when using a catalytic amount of perchloric acid. The method is relatively inexpensive, easily available, nonvolatile, nonexplosive, and thermally robust to catalyze the reaction at 80 °C by simple heating with good to excellent yields. The advantages of the reaction involve simple reaction protocol, simple workup, and improved synthesis in the presence of perchloric acid as catalyst.     

One-step method for synthesis of 2,4-disubstituted quinazoline 3-oxides by reaction of a 2-aminoaryl ketone with a hydroxamic acid using Zn(OTf)2 as the catalyst

A simple and efficient method for the preparation of 2,4-disubstituted quinazoline 3-oxides by reaction of a hydroxamic acid with 2-aminoaryl ketones using zinc(II) triflate as the catalyst is described.     

Green synthesis of 3,4-dihydropyrimidinones using nano Fe3O4@meglumine sulfonic acid as a new efficient solid acid catalyst under microwave irradiation

Design, synthesis and characterization of nano Fe₃O₄@meglumine sulfonic acid as a new solid acid catalyst for the simple and green one pot multicomponent synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones was studied. New solid acid catalyst was prepared through a clean and simple protocol and characterized using FTIR, VSM, TGA, SEM, elemental analysis (CHN) and XRD techniques. Heterogenization of homogeneous catalyst as a green approach is a useful method for enhancing the efficiency of catalyst. Presented study was a new method for attachment of homogeneous highly soluble catalyst (meglumine sulfate) to the magnetite nanoparticle surfaces for preparing a heterogeneous and effective catalyst. Obtained heterogeneous and reusable solid acid catalyst has high performance in the synthesis of Biginelli compounds. The reaction was performed under microwave irradiation as a rapid and green condition. Easy work up as well as excellent yield (90–98%) of products in short reaction times (40–200 s) and reusable catalyst are the main advantages of presented procedure. Reaction products were characterized in details using physical and chemical techniques such as melting point, ¹H NMR, ¹³C NMR and FTIR.     

Distereoselective one-pot synthesis of pyrimidopyrimidines using sulfated tin oxide as a reusable catalyst： An extension of Biginelli-type reaction

The Biginelli-type compounds 4,5,8a-triarylhexahydropyrimido[4,5-d]pyrimidine-2,7（1H,3H）-diones were synthesized by a one-pot three-component reaction using sulfated tin oxide as a reusable catalyst. This method has the advantages of high yields, short reaction time, simple starting materials and reusability of catalyst for several times.     

Calcium fluoride: an efficient and reusable catalyst for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones and their corresponding 2(1H)thione: an improved high yielding protocol for the Biginelli reaction

A simple and effective synthesis of 3,4-dihydropyrimidinone derivatives from aldehydes, 1,3-dicarbonyl compounds, and urea/thiourea in ethanol by using calcium fluoride as catalyst has been described. Compared with classical Biginelli reaction conditions, this new method has the advantage of excellent yields and shorter reaction times. Also, the catalyst can be reused without any reduction in efficiency.     

Ecofriendly and efficient procedure for hetero-Michael addition reactions with an acidic ionic liquid as catalyst and reaction medium

Abstract  

1-Methylimidazolium trifluoroacetate ([Hmim]TFA) is reported as a cost-effective catalyst for a simple and environmentally benign hetero-Michael reaction. [Hmim]TFA works both as reaction medium and catalyst. The reaction is applicable to various aromatic sulfur and nitrogen nucleophiles. This method has advantages such as high yields, short reaction time, and simple workup. The catalyst could be recycled several times without any loss of activity.     

A general synthetic method for the formation of arylaminotetrazoles using natural natrolite zeolite as a new and reusable heterogeneous catalyst

An efficient method for preparation of arylaminotetrazoles is reported using natrolite zeolite as a natural catalyst. Generally, isomer of 5-arylamino-1H-tetrazole can be obtained from arylcyanamides carrying electron-withdrawing substituent on aryl ring and as the electropositivity of substituent is increased, the product is shifted toward the isomer of 1-aryl-5-amino-1H-tetrazole. This method has the advantages of high yields, simple methodology, short reaction times and easy work-up. The catalyst can be recovered by simple filtration and reused in good yields.     

Transition-metal-free oxidative amidation of benzyl alcohols with amines catalyzed by NaI: a new method for the synthesis of benzamides

A simple, inexpensive, and efficient method for the synthesis of benzamides via the reaction of benzyl alcohols and amine hydrochloride salts in the presence of NaI as a green catalyst is described. Various derivatives of benzamide were synthesized in moderate to good yields using this method.     

无溶剂条件下勃姆石纳米粒子锅催化多组分合成3,4-二氢嘧啶-2-(1H)酮简

A simple, green, and efficient synthesis protocol for the synthesis of 3,4-dihydropyrimidin-2-(1H)-ones using boehmite nanoparticles as catalyst was developed. It did not use any toxic metal catalysts or corrosive acidic reagents. The method gave good to excellent yields and has short reaction time, operational simplicity, and a recyclable catalyst.     

无溶剂条件下勃姆石纳米粒子一锅催化多组分合成3,4-二氢嘧啶-2-(1H)酮(英文)

A simple, green, and efficient synthesis protocol for the synthesis of 3,4-dihydropyrimidin-2-(1H)-ones using boehmite nanoparticles as catalyst was developed.It did not use any toxic metal catalysts or corrosive acidic reagents.The method gave good to excellent yields and has short reaction time, operational simplicity, and a recyclable catalyst.     

中孔氧化硅负载铬催化剂上苯高选择性生成苯酚：响应曲面分析法用于反应条件优化

以硝酸铬为前驱体,中孔氧化硅SBA-16为载体,采用简单浸渍法制备了Cr/SBA-16催化剂,并采用广角和小角X射线衍射、N2吸附-脱附、透射电镜和紫外-可见光谱等技术对其进行了表征.同时将该催化剂用于以H2O2为氧化剂的苯直接羟基化制苯酚反应以考察其催化性能.将中心组合设计与响应曲面分析法(RSM)相结合,对影响反应性能的操作变量如反应温度、反应时间及H2O2和催化剂用量进行了优化.结果表明,独立变量和苯酚产率之间的关系可用二阶多项式模型来表达,其相关系数(R2)高达0.985,表明用RSM预测的数值与实验值吻合较好.得到的苯酚选择性较高时的操作条件为：反应温度324 K,反应时间8 h, H2O2和催化剂用量分别为3.28 mL和0.09 g.由此可见,将RSM法用于苯羟基化制苯酚反应条件优化是可靠的.