Static fatigue fracture of polyethylene: A morphological analysis

The fracture properties of a number of high-density polyethylenes were evaluated and related to their morphology. The resistance to initiation of fracture is related to the resistance to voiding of the materials and the rate of coalescence of voids. The propensity of the materials to void has been shown to be related to the size of the amorphous region. The resistance to propagation of the fracture is also related to the above factors as well as the ease of stretching and rupture of fibrils. The ease of fibril formation has been shown to be related to the degree of perfection of the crystallites.     

Curvature Effects in the Analysis of Pendant Bubble Data: Comparison of Numerical Solutions, Asymptotic Arguments, and Data

The pendant bubble method is commonly used to measure the evolution of the surface tension of surfactant solutions. Initially, the bubble interface is free of adsorbed surfactant. As time progresses, surfactant diffuses to the interface, adsorbs, and reduces the surface tension. The surface tension is assumed to be in equilibrium with the instantaneous surface concentration. Therefore, surface tension data are analyzed in terms of interfacial thermodynamics and mass transfer models in order to infer the mechanisms which determine the surfactant transport. Diffusion from the bulk solution to the bubble can be approximated as diffusion to a spherical interface. Approximating this process as diffusion to a plane introduces significant errors into the data analysis. Mass transfer to a sphere differs from that to a plane; the equilibration of the spherical interface is more rapid simply because of geometry. The failure to account for this effect in the interpretation of pendant bubble data can lead to serious errors in the transport coefficients for the surfactants. In the diffusion-controlled limit, surfactant diffuses to the sublayer immediately adjacent to the interface and adsorbs in local equilibrium according to the adsorption isotherm. There is a closed-form solution for Fick's law describing adsorption to a sphere in an infinite solution which reduces to the Ward and Tordai solution when the bubble radius is large. This equation, along with the adsorption isotherm relating the surface concentration and the sublayer concentration, must be solved numerically in order to solve for the time evolution of the surface concentration. At early times, the adsorption isotherm can be expanded about the clean interface state. At long times, small departures from the equilibrium state can be assumed. In these limits, asymptotic expansions can be obtained. The short- and long-time expansions are found in this study for adsorption to a sphere and compared to those obtained previously for adsorption to a planar interface. In particular, the long-time asymptote for adsorption to a sphere is proportional to t(-3/2); this asymptote differs significantly from that for adsorption to a plane, which goes as t(-1/2). The full solution for adsorption to a sphere is compared to the Ward and Tordai solution for adsorption to a planar interface. From a comparison of the full solutions, it is established that curvature cannot be neglected unless the ratio of the adsorption depth to the bubble radius is negligible. This ratio can be calculated a priori from equilibrium isotherm parameters. Using constants which describe the surfactant C(12)E(8), for which curvature plays a strong role in the surfactant adsorption dynamics, the short- and long-time solutions for adsorption to the interface are compared to the full solutions and to dynamic surface tension data to infer the range of validity of the approximations. Copyright 2001 Academic Press.     

Precision of Flash Pyrolysis-GC-MS Analysis: Experimental Evaluation of the Sources of Variability

The present study was carried out to evaluate the precision and to identify significant sources of variability in flash pyrolysis-GC-MS experiments. The analysis of variance has been applied to the example of polyethylene pyrolysis to estimate the impact of several controlled factors: sample handling, flash pyrolysis filament ageing and calibration. It was demonstrated that to get the best precision in experimental results, it is recommended to set the operator to reduce the impact of sample handling procedure and the filament to avoid variability due to changes in filament characteristics. In comparison, filament ageing and filament calibration are shown to influence in a limited extent the experimental results.     

What is and what should never be: artifacts,improbable phytochemicals,contaminants and natural products

Abstract

The scope of this review is to sensitize the natural product chemists to the underestimated problem related to artifact, comprising contaminants and improbable natural compounds. This review wants to give an overview about the various facets of this problem and to provide some hints to avoid incurring these situations. It does not pretend to report exhaustively about all the cases available in literature. The issue of artifacts has always existed and is quite impossible to completely eliminate because the results of phytochemical analysis are known only at the end of the work and in many cases there is not the possibility to compare the results. Therefore, it is important to take the necessary precautions during the workout in order to minimize the possibility that an unexpected event may occur. In second instance, anyone involved in these studies should increase the level of self-criticism with respect to the obtained experimental results.     

Evaluating the metabolic perturbations in Mangifera indica (mango) ripened with various ripening agents/practices through gas chromatography ‐ mass spectrometry based metabolomics

Mangifera indica L. (mango) is said to be the king of fruits due to its rich nutritional properties and mainly originates from the Indian sub‐continent. The consumption pattern of the mangoes has increased drastically, due to which, many ripening practices/agents were used to make it ready‐to‐eat fruit or juice for the consumers. The fruit quality and metabolic composition are said to be altered due to different ripening agents/practices. The present communication mainly deals to understand the metabolic perturbations in mango fruits due to different ripening practices/agents (room temperature ripening, ethylene, and calcium carbide) using gas chromatography ‐ mass spectrometry based metabolomics. The partial least square‐discriminant analysis has found 16 differential metabolites for different ripening agents/practices which are belong to the classes of amino acids, fatty acids, sugars, and polyols. Four metabolic pathways were found to alter in the fruit metabolome due to different ripening agents/practices. Fructose, glucose, and galactose were found to be significantly up‐regulated due to calcium carbide ripening in comparison to other ripening agents/practices. Overall findings from the present study advocates that mass spectrometry based metabolomics can be valuable tool to understand the fruit quality and safety with respect to consumer health.     

NMR spectroscopic study of the Murex trunculus dyeing process

It is widely accepted that indigo dyes derived from Murex trunculus were used to produce the biblical dyes tekhelet and argaman. We describe a method of following the debromination of natural leucoindigos and their binding to wool using NMR spectroscopy. Debromination is observed prior to reaction with the wool and prior to oxidation. Binding to the wool is shown to occur prior to oxidation. NMR allows the dyeing process to be followed. This, in principle, could be used to correct problems during dyeing that would increase the reliability of the process.     

Thermal degradation of vinylidene chloride/4-vinylpyridine copolymers

Vinylidene chloride polymers are prominent in the barrier plastics packaging industry. They display good barrier to the transport of oxygen (to prevent spoilage of food items) and flavor and aroma constituents (to prevent 'scalping' on the supermarket shelf). However, these polymers undergo thermal dehydrochlorination during processing. This can lead to a variety of problems including the evolution of hydrogen chloride which must be scavenged to prevent its interaction with the metallic walls of process equipment. Such interaction leads to the formation of metal halides which act as Lewis acids to facilitate the degradation. A potentially effective means to capture hydrogen chloride generated might be to incorporate into the polymer a mild organic base. Accordingly, copolymers of vinylidene chloride and 4-vinylpyridine have been prepared and subjected to thermal aging. Results suggest that the pyridine moiety is sufficiently basic to actively promote dehydrochlorination in the vinylidene chloride segments of the polymer.     

Fragmentations de quelques Derives thiophosphores sous L'impact electronique. II—Migration de groupes phenyles et d'atomes de soufre dans quelques derives dithiophosphores

Some compounds having two diphenylphosphino or diphenylthiophosphoranyl groups give rise by electron-impact-induced fragmentation to varied migrations of phenyl groups or of sulfur atoms. According to the compound, the phenyl moves by migration from one phosphorous to the other, or to the sulfur which is bound to the other phosphorous. Migration of the phenyl from the phosphorous towards the carbon arises when this is strongly electrophilic. The thiophosphorous compounds also give rise to sulfur atom migrations from the phosphorous to the carbon, or to the double bond placed in α of phosphorous atom.     

The role of errors related to DFT methods in calculations involving ion pairs of ionic liquids

Ionic liquids (ILs) play a key role in many chemical applications. As regards the theoretical approach, ILs show added difficulties in calculations due to the composition of the ion pair and to the fact that they are liquids. Although density functional theory (DFT) can treat this kind of systems to predict physico–chemical properties, common versions of these methods fail to perform accurate predictions of geometries, interaction energies, dipole moments, and other properties related to the molecular structure. In these cases, dispersion and self‐interaction error (SIE) corrections need to be introduced to improve DFT calculations involving ILs. We show that the inclusion of dispersion is needed to obtain good geometries and accurate interaction energies. SIE needs to be corrected to describe the charges and dipoles in the ion pair correctly. The use of range–separated functionals allows us to obtain interaction energies close to the CCSD(T) level. © 2017 Wiley Periodicals, Inc.     

Binding affinity of a small molecule to an amorphous polymer in a solvent. Part 2: preferential binding to local sites on a surface

Crystallization, a separation and purification process, is commonly used to produce a wide range of materials in various industries, and it usually begins with heterogeneous nucleation on a foreign surface in industrial practice and most other circumstances. Recent studies show that amorphous polymeric substrates are useful in controlling crystallization and selectively producing pharmaceutical polymorphs. In our previous publication, we investigated the possible correlation of the binding affinity of one molecule to key binding sites (local binding), and the possibility of using this binding affinity to guide the selection of polymers promoting heterogeneous nucleation. The studied systems were aspirin binding to four nonporous cross-linked polymers in ethanol-water 38 v% mixture. Cross-linked with divinylbenzene (DVB), these polymers were poly(4-acryloylmorpholine) (PAM), poly(2-carboxyethyl acrylate) (PCEA), poly(4-hydroxylbutyl acrylate) (PHBA), and polystyrene (PS). We discovered that the trend of the magnitudes of the average free energies of binding to the best sites is very similar to that of heterogeneous nucleation activities. This Article aims to investigate whether or not local binding to key sites is the important variable to describe heterogeneous nucleation as opposed to the overall/average binding affinity of molecules to a surface, and to investigate the possibility of using the overall binding affinity to guide the selection of polymers. We used the polymer surfaces generated from our previous study to calculate the overall binding affinity of aspirin molecules to the surface as measured by the preferential interaction coefficients of aspirin (1 m) to these polymers. We discovered that the trend of the average preferential interaction coefficients does not correlate as well to that of heterogeneous nucleation activities as the free energies of binding to the best sites. We also computed the average numbers of aspirin molecules associated with the areas of the surfaces' best binding sites and found that they correlate better to heterogeneous nucleation activities than the average preferential interaction coefficients. These results further support that local binding is indicative of heterogeneous nucleation. Moreover, we found a weak trend of the distance order parameters of the aspirin molecules to be similar that of heterogeneous nucleation activities. Our results from the two-part study suggest the importance of local binding to heterogeneous nucleation as well as the possibility of using the binding affinity to the local area (the free energy of binding to the best site and the number of nucleating molecules associated with the area of the best binding site) and the distance order parameters to guide the selection of polymers.     

Characterization of diamond surface terminations using electrochemical grafting with diazonium salts

A new characterization technique to identify qualitatively diamond surface terminations and to measure quantitatively the density of hydrogen atoms bonded to the diamond surface is introduced using electrochemical grafting of diamond with diazonium salts. The cathodic peak potentials for the grafting of nitrophenyl layers reveal qualitative information about surface terminations ranging from –H, to –OH to –O–. The charges consumed during the conversion of nitro- to aminophenyl are used to calculate quantitatively the density of hydrogen atoms bonded to the diamond surface. As hydrogen is generally very difficult to detect by other methods like X-ray Photon Spectroscopy, this new method will add significantly to the understanding of surface related properties of transducers.     

加深对现代分析仪器的认识提高使用与维修水平

熟悉了解仪器的总体结构性能,剖析零部件的功能,注重基础研究,弄清仪器的安全联锁保护是提高仪器使用与维修水平的关键;重视仪器的故障分析与判断、准确及地维修、合理地使用保养是保持仪器良好运行状态的唯一手段;建立仪器档案,定期进行性能测试是了解仪器,把握仪器运行脉搏、充分利用仪器的前提。     

Robust conductance of dumbbell molecular junctions with fullerene anchoring groups

The conductance of a molecular wire connected to metallic electrodes is known to be sensitive to the atomic structure of the molecule-metal contact. This contact is to a large extent determined by the anchoring group linking the molecular wire to the metal. It has been found experimentally that a dumbbell construction with C(60) molecules acting as anchors yields more well-defined conductances as compared to the widely used thiol anchoring groups. Here, we use density functional theory to investigate the electronic properties of this dumbbell construction. The conductance is found to be stable against variations in the detailed bonding geometry and in good agreement with the experimental value of G=3×10(-4) G(0). Electron tunneling across the molecular bridge occurs via the lowest unoccupied orbitals of C(60) which are pinned close to the Fermi energy due to partial charge transfer. Our findings support the original motivation to achieve conductance values more stable towards changes in the structure of the molecule-metal contact leading to larger reproducibility in experiments.     

增强无机化学教学的趣味性策略的案例研究

针对无机化学的理论知识学习的"枯燥",提出无机化学教学趣味性的三大增强策略,一是设定情境,让"枯燥"的知识生动起来;二是善用比喻,让"困难"的知识有趣起来;三是自创"小诗",让"复杂"的知识幽默起来。通过实践,三大增强策略的效果很好,值得广泛推广。     

Automated thermal conductivity apparatus

The importance of reducing the time required for taking thermal conductivity measurements has increased due to the need to conserve energy. A method is described that reduces man-hours to a minimum while getting the maximum information from the measurements.The equipment uses a microprocessor to automatically scan the temperature, a data logger to make the required temperature measurements, and a computer to plot the results of the thermal conductivity values obtained. Early experiments produced values accurate to within 5%. With further refinements this can be improved to 1%.Already, the effect of curing thermosetting materials has been seen in measurements. Future applications can include tailoring materials to provide specific thermal conductivity properties and make it possible for some of the differences between a priori calculations and experiments to be better understood.     

Advanced Reprocessing Developments in Europe Status on European Projects ACSEPT and ACTINET-I3

Nuclear energy has more than ever to demonstrate that it can contribute safely and on a sustainable way to answer the international increase in energy needs. Actually, in addition to an increased safety of the reactors themselves, its acceptance is still closely associated to our capability to reduce the lifetime of the nuclear waste, to manage them safely and to propose options for a better use of the natural resources. Spent fuel reprocessing can help to reach these objectives. At the European level, ACSEPT and ACTINET-I3 have worked together to improve our knowledge in actinide chemistry and advanced separation process development.     

Hydrogen bonding pathways in human dihydroorotate dehydrogenase

Dihydroorotate dehydrogenase (DHOD) catalyzes the only redox reaction in the pathway for pyrimidine biosynthesis. In this reaction, a proton is transferred from a carbon atom of the substrate to a serine residue, and a hydride is transferred from another carbon atom of the substrate to a cofactor. The deprotonation of the substrate is postulated to involve a proton relay mechanism along a hydrogen bonding pathway in the active site. In this paper, molecular dynamics simulations are used to identify and characterize potential hydrogen bonding pathways that could facilitate the redox reaction catalyzed by human DHOD. The observed pathways involve hydrogen bonding of the active base serine to a water molecule, which is hydrogen bonded to the substrate carboxylate group or a threonine residue. The threonine residue is positioned to enable proton transfer to another water molecule leading to the bulk solvent. The impact of mutating the active base serine to cysteine is also investigated. This mutation is found to increase the average donor-acceptor distances for proton and hydride transfer and to disrupt the hydrogen bonding pathways observed for the wild-type enzyme. These effects could lead to a significant decrease in enzyme activity, as observed experimentally for the analogous mutant in Escherichia coli DHOD.     

Internal quality controls applied in inductively coupled plasma mass spectrometry multi-elemental analysis in the second French Total Diet Study

In 2006, the French Food Safety Agency (AFSSA) started the second French Total Diet Study to assess exposure to essential and non-essential elements through dietary intake by analysing 1352 food samples. A total of 21 elements were analysed to date by Inductively Coupled Plasma Mass Spectrometry after closed vessel microwave digestion, in 660 samples corresponding to at half of the study. This work presents and discusses the results of the various internal quality controls (IQC) applied to ensure that the analytical procedure is correctly carried out, from digestion to analysis, and to enable analytical chemists to validate the results obtained. The whole IQC allows to estimate uncertainties according to elements and to select those that should be discarded from the study or only given as indicative values for elements that were not within defined quality limits.     

Measuring the deformation of a ferrogel sphere in a homogeneous magnetic field

A sphere of a ferrogel is exposed to a homogeneous magnetic field. In accordance to theoretical predictions, it gets elongated along the field lines. The time dependence of the elastic shear modulus causes the elongation to increase with time, similar to mechanic creep experiments, and the rapid excitation causes the sphere to vibrate. Both phenomena can be well described by a damped harmonic oscillator model. By comparing the elongation along the field to the contraction perpendicular to it, we can calculate Poisson's ratio of the gel. The magnitude of the elongation is compared to the theoretical predictions for elastic spheres in homogeneous fields.     

The viscosity of aqueous electrolyte solutions and the TTG model

An equation covering the dynamic viscosity from zero to high concentrations has been derived on the basis of the TTG model. The equation is compatible with the Eyring andNMR theories and has a similar form to the Othmer-rule equation. A component of the limiting viscosity slope is shown to be proportional to the Falkenhagen slope. The TTG equation was tested for 20 electrolytes of diverse charge type and found to fit the data within the experimental errors. The equation is simply extended to cover pressure, temperature, and component changes. The viscosities of three multicomponent systems are predicted to within the experimental errors. The derived parameters of the equation were found to be simply related to the TTG volume of the solute.