Electrochemical enzymatic determinations of ethanol and -lactic acid with a carbon paste electrode modified chemically with nicotinamide adenine dinucleotide

The oxidized form of nicotinamide adenine dinucleotide (NAD⁺) is chemically immobilized at the surface of a carbon paste electrode containing n-octaldehyde. The NAD⁺ is converted to NADH by oxidation of ethanol and -lactic acid catalyzed by their respective dehydrogenases, and the NADH formed is oxidized electrochemically to the original NAD⁺, thus giving a well defined linear-sweep voltammetric peak. The peak area is linearly related to the amount of ethanol or -lactic acid in the range 0.05–2 × 10^-9 mol.     

Spectroscopic and voltammetric studies of Pefloxacin bound to calf thymus double-stranded DNA

Spectral and electrochemical studies have been carried out on the interaction of pefloxacin with calf thymus double-stranded dsDNA. The voltammetric behavior of pefloxacin was investigated at glassy carbon, carbon paste and dsDNA-modified carbon paste electrodes using cyclic voltammetry. Pefloxacin was oxidized, yielding one irreversible oxidation peak. The modification of the carbon paste surface with dsDNA allowed an accumulation process to take place for pefloxacin such that higher sensitivity was achieved compared with the bare surface. The response was characterized with respect to ionic strength, accumulation time, pefloxacin concentration, and other variables. The stripping differential pulse voltammetric response showed a linear calibration curve in the range 1.0×10^–7–1.0×10^–5 mol l^–1 with a detection limit of 5.0×10^–8 mol l^–1 at the dsDNA modified electrode. The method was applied to the direct determination of pefloxacin in diluted urine samples.     

Voltammetric study of glibenclamide at carbon paste and Sephadex-modified carbon paste electrodes

The oxidative behaviour of the antidiabetic agent glibenclamide on a bare carbon paste electrode (CPE) and a Sephadex-modified carbon paste electrode (SMCPE) was explored by cyclic and differential pulse voltammetry (DPV). The analysis procedure consisted of an open circuit accumulation step in stirred sample solution of Britton-Robinson buffer (0.04 mol L^–1, pH 2.0). This was followed by medium exchange to a clean solution of Britton-Robinson buffer (0.04 mol L^–1, pH 5.0), and subsequently an anodic potential scan was effected to obtain the voltammetric peak. The glibenclamide oxidation peak current obtained by DPV was proportional to the concentration of the glibenclamide in the range of 1.0×10^–9 mol L^–1 to 5.0×10^–8 mol L^–1 for 180 s accumulation time, with a detection limit of 4.0×10^–10 mol L^–1. A method was developed for the determination of glibenclamide in formulation and spiked human serum. Moreover, the proposed procedure was used to estimate the serum concentrations after oral administration of a 5 mg tablet of glibenclamide to three diabetic subjects.     

Electroanalytical Study of Prussian Blue Modified Glassy Carbon Paste Electrodes

Two types of glassy carbon (GC) powder (i.e., Sigradur K and Sigradur G) have been mixed with mineral oil to obtain glassy carbon paste electrodes (GCPE's). The electrochemical behavior of such electrodes at different percentages of glassy carbon has been evaluated with respect to the electrochemistry of ferricyanide as revealed with cyclic voltammetry and the best paste composition was chosen. GC was then modified with Prussian Blue (PB), mixed at different percentages with unmodified GC and with a fixed amount of mineral oil in order to obtain PB modified glassy carbon paste electrodes (PB‐GCPE's). PB‐GCPE's with different percentages of GC modified with PB (PB‐GC) were compared and the dependence on the amount of PB on their performances was evaluated by studying the parameters of cyclic voltammetry (i.e., current peak, ΔE_p, anodic and cathodic current ratio, charge density) and the amperometric response to H₂O₂. Data interpretation based on the GC surface area is presented. GCPE's with a selected amount of PB‐GC were then tested as H₂O₂ probes and all the analytical parameters together with the dependence on pH were evaluated. Some preliminary experiments with these electrodes assembled as glucose, lysine and lactate biosensors are also reported.     

Electrocatalytic oxidation of NADH at single-wall carbon-nanotube-paste electrodes: kinetic considerations for use of a redox mediator in solution and dissolved in the paste

Cyclic voltammetry has been successfully used to study the oxidation of nicotinamide adenine dinucleotide (NADH) at single-wall carbon-nanotube-paste (CNTP) electrodes modified with p-methylaminophenolsulfate (p-MAP) and 3,4-dihydroxybenzaldehyde (3,4-DHB). Diffusion-like behaviour was observed for p-MAP-modified electrodes, and a diffusion coefficient of 2.4×10^–6 cm² s^–1 was calculated for p-MAP in the paste. The behaviour of 3,4-DHB-modified CNTP electrodes was typical of that of surface-confined mediators. p-MAP electrocatalytic activity was first checked in solution, and a rate constant of 9.2 mol^–1 L s^–1 was obtained for the reaction between NADH and the mediator. The p-MAP-modified electrode did not have significant electrocatalytic activity for electro-oxidation of NADH, probably because of the formation of a complex between NADH and the confined mediator. In contrast, the 3,4-DHB-modified electrode had very good NADH electrocatalytic activity, with a heterogeneous rate constant of approximately 20×10² mol^–1 L s^–1.     

Electrocatalytic Properties and Voltammetric Determination of Melatonin at a Nanostructured Film Electrode

A multi-wall carbon nanotube (MWNT) film coated glassy carbon electrode (GCE) was fabricated, and the electrochemical behavior of melatonin on the MWNT film coated GCE was investigated. The oxidation peak current of melatonin increases significantly and the oxidation peak position shifts positively at the MWNT film modified GCE compared to that at a bare GCE. This indicates that MWNTs feature highly effective catalysis to the electrochemical oxidation of melatonin. A simple and sensitive electroanalytical method was developed for the determination of melatonin. The oxidation peak current is proportional to the concentration of melatonin from 8×10^–8 to 1×10^–5molL^–1. The detection limit is about 2×10^–8molL^–1 for 3min accumulation. The proposed method was demonstrated to work satisfactorily with commercial capsules.     

Role of radical ions in the thermally stimulated luminescence of uranium doped BaCO3 system

Electron paramagnetic resonance (EPR) studies of -irradiated uranium doped BaCO₃ have shown the formation of CO₃ ^–, CO₂ ^–, O₃ ^– and O₂ ^– ions. Thermally stimulated luminescence (TSL) glow curves of the -irradiated samples in the 300–600 K range have exhibited an intense peak around 360 K and a weak one around 440 K. The trap parameters for these peaks have been determined from TSL data. Spectral studies of the glow have revealed emission around 566, 583 and 590 nm characteristic of the uranate ion. From studies on the thermal stabilities of the radical ions, it has been inferred that the glow peak around 360 K is associated with the thermal destruction of O₂ ^– ion and the peak around 440 K is associated with the thermal destruction of CO₃ ^– ion.     

Comparison of the Electrochemical Reactivity of Carbon Nanotubes Paste Electrodes with Different Types of Multiwalled Carbon Nanotubes

Carbon nanotubes (CNTs) are widely used in electrochemical studies. It is reported that CNTs with different source and dispersed in different agents [1] yield significant difference of electrochemical reactivity. Here we report on the electrochemical performance of CNTs paste electrodes (CNTPEs) prepared by multiwalled carbon nanotubes (MWNTs) with different diameters, lengths and functional groups. The resulting electrodes exhibit remarkable different electrochemical reactivity towards redox molecules such as NADH and K₃[Fe(CN)₆]. It is found that CNTPEs prepared by MWNTs with 20–30 nm diameter show highest catalysis to NADH oxidation, while CNTPEs prepared by MWNTs with carboxylate groups have best electron‐transfer rate (The peak‐peak separation (ΔE_p) is +0.108 V for MWNTs with carboxylate groups, +0.155 V for normal MWNTs, and +0.174 V for short MWNTs) but weak catalysis towards oxidation of NADH owing to the hydrophilicity of carboxylate groups. The electrochemical reactivity depends on the lengths of CNTs to some extent. The ‘long’ CNTs perform better in our study (The oxidation signals of NADH appear below +0.39 V for ‘long’ CNTs and above +0.46 V for the ‘short’ one totally). Readers may get some directions from this article while choose CNTs for electrochemical study.     

Electrochemical enzymatic determinations of ethanol and l-lactic acid with a carbon paste electrode modified chemically with nicotinamide adenine dinucleotide

The oxidized form of nicotinamide adenine dinucleotide (NAD⁺) is chemically immobilized at the surface of a carbon paste electrode containing n-octaldehyde. The NAD⁺ is converted to NADH by oxidation of ethanol and l-lactic acid catalyzed by their respective dehydrogenases, and the NADH formed is oxidized electrochemically to the original NAD⁺, thus giving a well defined linear-sweep voltammetric peak. The peak area is linearly related to the amount of ethanol or l-lactic acid in the range 0.05–2 × 10^-9 mol.     

Electrochemical Determination of Tannins Using Multiwall Carbon Nanotubes Modified Glassy Carbon Electrode

A novel chemically modified electrode is prepared on the basis of the attachment of multiwall carbon nanotubes (MWNTs) to the surface of a glassy carbon electrode (GCE) in the presence of a hydrophobic surfactant. The electrochemical behavior of tannins at the MWNTs-modified GCE is investigated. Tannins yield a well-defined oxidation at about 0.30 V (SCE) at the MWNTs-modified GCE. MWNT-film shows remarkable enhancement effect on the oxidation peak current of tannins. The experimental parameters are optimized, and a direct electrochemical method to detect tannins is proposed. The oxidation peak current is proportional to the concentration of tannins over the range from 4 × 10^–7 to 2 × 10^–4 M, and the detection limit is 1 × 10^–7 mol/l after 5 min of accumulation. The relative standard deviation of 6% for determination of 2 × 10^–6 mol/l tannins indicates excellent reproducibility. The analysis method is demonstrated by using tea and Chinese gall samples.     

Determination of tetramethrin (neo-pynamin) by differential pulse voltammetry with a carbon paste electrode modified with sepiolite

Summary A method is described for the determination of tetramethrin (neo-pynamin) by differential pulse voltammetry with a carbon paste electrode modified with 10% (w/w) sepiolite. Preconcentration was carried out under open circuit conditions in 0.01 mol/l acetic acid/potassium acetate medium at pH 5.3 over 10 min, recording the voltammogram in 0.01 mol/l of KH₂PO₄/K₃PO₄ at pH 12. This led to the appearance of a peak at –1.32 V against SCE at 40 mVs^–1 and a pulse amplitude of 100 mV. Under these conditions determination limits of 45 ng ml^–1 were achieved. The method was applied to the determination of tetramethrin in soil and water samples.

---

Bestimmung von Tetramethrin (Neo-Pynamin) durch Differential-Puls-Voltammetrie unter Verwendung einer mit Sepiolit modifizierten Kohlepaste-Elektrode

     

Electrochemistry of electropolymerized tetra (p-aminophenyl)porphyrin nickel film electrode and catalytic oxidation of acetaminophen

A polymer film of tetra(p-aminophenyl) porphyrin nickel was obtained at a glassy carbon electrode by a cyclic voltammetric method. Cyclic voltammograms of the film electrode exhibited two stable redox waves with anodic peak potential at 0.43V and cathodic peak potential at 0.30 V in 0.5M NaOH aqueous solution. The electrocatalytic characteristics of the film electrode were studied by cyclic voltammetry, a. c. impedance analysis and other methods. The oxidation peak current increased linearly with the addition of acetaminophen to the aqueous NaOH medium in the range 1 × 10^–6–2 × 10^–4 M acetaminophen. The performance of the electrode was verified by the determination of acetaminophen in a paracetamol preparation.     

Voltammetric determination of N-acetylcysteine using a carbon paste electrode modified with copper(II) hexacyanoferrate(III)

The preparation and electrochemical characterization of a carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) as well as its behavior as electrocatalyst toward the oxidation of N-acetylcysteine were investigated. The electrochemical behavior of the modified electrode and the electrooxidation of N-acetylcysteine were explored using sweep linear voltammetry. The best voltammetric response was observed for a paste composition of 20% (w/w) copper(II) hexacyanoferrate(III) complex, acetate buffer solution at pH of 6.0 as the electrolyte and scan rate of 10 mV s^− 1. A linear voltammetric response for N-acetylcysteine was obtained in the concentration range from 1.2 × 10^− 4 to 8.3 × 10^− 4 mol L^− 1, with a detection limit of 6.3 × 10^− 5 mol L^− 1. The proposed electrode is useful for the quality control and routine analysis of N-acetylcysteine in pharmaceutical formulations.     

Electrochemical behavior and detection of guanine using a sodium montmorillonite-modified carbon paste electrode

Herein, a sodium montmorillonite-modified carbon paste electrode is described for the electrochemical determination of guanine. Guanine yields a well-defined and very sensitive oxidation peak at the sodium montmorillonite-modified carbon paste electrode. Compared with the unmodified carbon paste electrode, the modified electrode facilitates the electron transfer of guanine, since it notably increases the oxidation peak current and lowers the oxidation overpotential of guanine. Based on this, a simple sensitive reliable electrochemical method is proposed for the detection of guanine after all the experimental parameters, such as solution pH value, sodium montmorillonite content in the carbon paste electrode, accumulation potential, and time, are optimized. Under the optimized conditions, the oxidation peak current of guanine varies linearly with its concentration in the range 5.0×10⁻⁸ to 2.0×10⁻⁵ M and the detection limit (signal-to-noise=3) is 2.0×10⁻⁸ M after 4-min accumulation. This method is successfully demonstrated with urine samples. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 2, pp. 178–182. The text was submitted by the authors in English.     

Linear scan stripping voltammetry of copper(II) at the chemically modified carbon paste electrode

A new chemically modified electrode (CME), -benzoinoxime (CUPRON) modified carbon paste electrode, for determining copper(II) is reported because of its excellent selectivity and sensitivity. The electrode is made by mixing a quantity of CUPRON (25%, w/w) with graphite powder (50%, w/w) and paraffin oil (25%, w/w). The CME preferentially deposits copper from the pH 8.5 NH₃-NH₄Cl buffer solution containing copper(II) under an open circuit and most of metal ions do not interfere with the measurements. The detection limit (S/N of three) for determining Cu(II) is 3 × 10^–10 g/ml after 10 min accumulation in fast linear scan stripping voltammetric measurement. Linear calibration curves are obtained for Cu(II) concentration ranged from 1 × 10^–8 M to 1 × 10^–6 M. The response can be maintained with relative standard deviation of 6.0% in a 5 × 10^–6 M Cu(II) solution after eight accumulation/measurement/ regeneration cycles at the same electrode surface. The effect resulted from carbon paste preparation, reduction potential, electrode renewal, electrolyte and solution pH, preconcentration time, concentration dependence, possible interference and other variables has been evaluated. As for application, the CME demonstrates its high sensitivity and copper-selectivity in complex composition samples, such as anodic mud and polluted water.     

Voltammetric performance and application of a sensor for sodium ions constructed with layered birnessite-type manganese oxide

The preparation and electrochemical characterization of a carbon paste electrode modified with layered birnessite-type manganese oxide for use as a sodium sensor is described. The effects of powder synthesis process (sol-gel and redox precipitation) for birnessite on the electrochemical activity of the sensor was investigated by cyclic voltammetry. The carbon paste electrode modified with birnessite-type manganese oxide that was synthesized by the sol-gel method showed a best electrochemical for sodium ions. The detection is based on the measurement of anodic current generated by oxidation of Mn(III) to Mn(IV) at the surface of the electrode and consequently the sodium ions extraction into the birnessite structure. The best voltammetric response was obtained for an electrode composition of 15% (w/w) birnessite oxide in the paste, a TRIS buffer solution of pH 8.0 and a scan rate of 50 mV s⁻¹. A sensitive linear voltammetric response for sodium ions was obtained in the concentration range of 7.89 × 10⁻⁵ to 3.49 × 10⁻⁴ mol L⁻¹ with a slope of 37.5 μA L mmol⁻¹ and a detection limit (3σ/slope) of 3.43 × 10⁻⁵ mol L⁻¹ using cyclic voltammetry. Under the working conditions, the proposed method was successfully applied to determination of sodium ions in urine samples.     

Voltammetric determination of quercetin at a multi-walled carbon nanotubes paste electrode

Quercetin can effectively accumulate at multi-walled carbon nanotubes-paraffin oil paste electrodes (CNTPE) and cause a sensitive anodic peak at around 0.32 V (vs. SCE) in a 0.10 M phosphate buffer solution (pH = 4.0). Under optimized conditions, the anodic peak current is linear to quercetin concentration in the ranges of 2.0 × 10^− 9−1.0 × 10^− 7 M and 1.0 × 10^− 7−2.0 × 10^− 5 M, and the regression equations are i_p (μA) = 0.0017 + 0.928c (μM, r = 0.999) and i_p (μA) = 0.183 + 0.0731c (μM, r = 0.995), respectively. This paste electrode can be regenerated by repetitively cycling in a blank solution for about 2 min. A 1.0 × 10^− 6 M quercetin solution is measured for 10 times using the same electrode regenerated after every determination, and the relative standard deviation of the peak current is 1.7%. The method has been applied to the determination of quercetin in hydrolysate product of rutin and the recovery is 99.2–102.6%. In comparison with graphite paste electrode, carbon nanotubes-nujol paste electrode and carbon nanotubes casting film modified glassy carbon electrode, the CNTPE gives higher ratio of signal to background current and better defined voltammetric peak.     

Studies on the voltammetric behaviour of a 2-mercaptoimidazole containing carbon paste electrode: determination of traces of silver

The voltammetric behaviour of a 2-mercaptoimidazole (2-MI) containing carbon paste electrode was studied. When mixed to carbon paste as an electrode modifier, 2-MI can be reduced at negative potentials (–1 V vs. SCE), but it does not give a response in the potential range where Ag(0) is oxidized to Ag(I). Silver could be accumulated from 0.1 mol l^–1 acetate buffer onto a 2-MI modified carbon paste electrode without a potential applied; after medium exchange, it was reduced at –1 V vs. SCE in 0.1 mol l^–1 acetate buffer solution and determined by differential pulse anodic stripping voltammetry. With suitable preconcentration times, the detection limit was 0.1 g l^–1; a linear relation between current and concentration was found to exist within a range of 0.5 to 1000 g l^–1. In the presence of EDTA, common metal ions have no or only little effect on the voltammetric determination of silver.     

Voltammetric determination of 2-nitrophenol at a bentonite-modified carbon paste electrode

A bentonite-modified carbon paste electrode has been applied to the determination of 2-nitrophenol by differential pulse voltammmetry. The electrochemical reduction of 2-nitrophenol at –0.8 V is carried out in an artificial sea water-formic acid/sodium formate medium at pH 4. The peak height was found to be dependent on the pH over the range 2–11; the presence of a secondary process was observed in the pH range 8–11. The peak potential showed a dependence on pH, with two linear regions with different slopes. A linear relationship between peak intensity and concentration was obtained in the range 0.07–10 mgl^–1, with a detection limit of 0.03 mg 1^–1 and a coefficient of variation of 1.3% at 5 mg 1^–1. The effects of organic and inorganic species on the 2-nitrophenol determination were studied with a view to testing the resolution of the voltammetric technique. The proposed method has been applied to sea water samples with good results.     

Electrocatalytic oxidation of thiosulfate on a modified nickel hexacyanoferrate film electrode

Summary A modified nickel hexacyanoferrate film glassy carbon electrode is prepared by the electrochemical deposition technique. The film is very stable upon voltammetric scanning in the potential range of 1.0 to –0.5 V (vs. SCE) and an oxidation peak occurs at 0.35 V (vs. SCE) (1 mol/l NaNO₃). The effects of electrolyte, solvent, coexisting ions and other variables on the voltammetric behaviour of the modified film have been studied. The thickness of the resulting film can be controlled by changing the number of voltammetric cycles and the concentrations of nickel(II) and hexacyanoferrate(III) ions. The film shows catalytic activity towards electrooxidation of thiosulfate with a peak potential +0.5 V (K^–-containing media). This oxidation potential of thiosulfate on the modified electrode is shifted negatively by about 550 mV as compared to the naked glassy carbon electrode. For practical application, the modified electrode can be used for the determination of thiosulfate in concentrations from 5.0×10^–5 to 1.0×10^–1 mol/l. This method has been successfully applied to the determination of thiosulfate in photographic waste effluents.