Effect of heating and aging on microstructure of polyester-polyamide copolymer

Polyester-polyamide (PET/PA) copolymers offer a wide range of possible applications where both dimensional stability and good impact resistance can be achieved from their synergism. In order to ensure these properties for long-term use, however, problems of phase separation, volume change, and chemical reequilibration on heating or aging must be identified and overcome. Wide-angle x-ray diffraction (WAXD), small-angle x-ray scattering (SAXS), and thermal analysis were employed to follow the microstructure of a 70:30 PET/PA copolymer with several different processing histories as a function of heat history and both short-term and long-term aging. Heating the copolymer, as received, above the melting temperature of PET caused phase mixing. The effect of heating on crystallinity depended on starting crystallinity. Holding the copolymer at 50°C, just below the glass transition temperature of PET, caused phase separation in samples which had been annealed for 30 min at 150°C. On long-term aging samples gave evidence of phase mixing. The results indicate highly nonequilibrium structure in the material, regardless of the original processing.     

Damping elastomer with broad temperature range based on irregular networks containing hyperbranched polyester and dangling chains

Elastomer is one of the important materials for vibration and noise reduction. However, its narrow effective damping temperature range (tanδ ≥ 0.3) remains to be a major issue that hinders its application as a damping material. Herein, we precisely design and synthesize a polyurethane structure where specific dangling chains with both electron‐donating group and electron‐absorbing group were introduced into prepolymers, generating more hydrogen bonding interaction with the main chain to hinder microphase separation. At the same time, hyperbranched polyester as a cross‐linking agent increases its free volume effectively. The synergy effect of enhancement of hydrogen bonding, decrease of microphase separation, and increase of free volume results in a higher damping polyurethane elastomer with a great wider effective damping temperature range up to 175°C (−60°C‐115°C), which provides a new idea for the preparation of damping elastomer.     

Superior heat‐resistant and oil‐resistant blends based on dynamically vulcanized hydrogenated acrylonitrile butadiene rubber and polyamide 12

High‐performance thermoplastic vulcanizates (TPVs) are the new generation of TPVs that provide superior heat and oil aging behavior. TPVs based on hydrogenated acrylonitrile butadiene rubber and polyamide 12 (PA12) have been first developed by the dynamic vulcanization process, in which selective cross‐linking of the elastomer phase during melt mixing with the thermoplastic phase (PA12) was carried out simultaneously. In this present investigation, hydrogenated acrylonitrile butadiene rubber (HNBR)/PA12 and partially hydrogenated carboxylated acrylonitrile butadiene rubber (XHNBR)/PA12 with blend ratio of 50:50, 60:40, and 70:30 wt% were prepared at 185°C at a rotor speed of 80 rpm for 5 min. Di‐(2‐tert‐butyl peroxy isopropyl) benzene was chosen as the suitable cross‐linking peroxide to pursue the dynamic vulcanization. TPV based on 50:50 HNBR/PA12 and XHNBR/PA12 show better physico‐mechanical properties, rheological behavior, thermal stability, dynamic mechanical analysis, and creep behavior among all the TPVs. Morphology study reveals that dispersed phase morphology has been formed with an average dimension of the rubber particles in the range of 0.8–1.5 µm. For aging test, TPVs were exposed to air and ASTM oil 3, respectively. Air aging tests were carried out in hot air oven for 72 hr at 125°C, while the oil aging tests were carried out after immersion of the samples into the oils in an aging oven. After aging, there is only slight deterioration in the physico‐mechanical properties of the TPVs. In case of 50:50 blends of HNBR/PA12 and XHNBR/PA12, the retention of the properties upon after aging was found excellent. These TPVs are designed to find potential application in automotive sector especially for under‐hood‐application, where high‐temperature resistance as well as high oil resistance is of prime importance. Copyright © 2016 John Wiley & Sons, Ltd.     

Studies on enhancing the keeping quality of peach (Prunus persica Bausch) Cv. Elberta by gamma-irradiation

The effect of gamma-irradiation on keeping quality of peach fruit was studied. The fruit, after harvesting at proper maturity stage, was irradiated in the dose range of 1.0–2.0 kGy, stored under ambient (temp. 25±2 °C, RH 70%) and refrigerated (temp. 3±1 °C, RH 80%) conditions and evaluated periodically for firmness, total soluble solids (TSS), anthocyanins, water-soluble pectic fractions, loss in weight and decay percentage. The anthocyanin evaluation of the fruits revealed that irradiation enhanced the colour development under both the storage conditions. The gamma-irradiation dose range of 1.2–1.4 kGy proved effective in maintaining higher TSS concentration, reducing weight loss and significantly (p⩽0.05) delaying the decaying of the fruit by 6 days under ambient conditions and by 20 days under refrigerated storage conditions.     

A comparison of the increased temperature accelerated degradation of Poly(d,l-lactide-co-glycolide) and Poly(l-lactide-co-glycolide)

Bioresorbable polymers composed of Poly(lactide), Poly(glycolide) and their related copolymers have become increasingly popular for the preparation of bone substitute constructs. In vitro tests assessing the degradative changes in physicochemical, mechanical, and biological properties of bioresorbable polymers are generally carried out at 37 °C, in pH 7.4 phosphate-buffered saline (PBS). However, long degradation times, varying from months to years make it difficult to assess these polymers at their late stages of degradation. An increased temperature accelerated degradation methodology, that simulates the long-term degradation of Poly(d,l-lactide-co-glycolide) and Poly(l-lactide-co-glycolide), has been validated in this study. Samples were degraded in PBS, under sterile conditions. Degradation temperatures of 47 °C, 57 °C and 70 °C were selected and compared to physiological temperature, 37 °C. At predetermined time intervals, samples were retrieved and evaluated for changes in mass, swelling, molecular weight, crystallinity, and thermal properties. The results from this study suggest that the degradation mechanism at elevated temperatures is similar to that observed at 37 °C. It is recommended that 47 °C is adopted by the research community to accelerate the degradation of these polymers. It is hoped the application of this methodology could be used as a valuable tool, prior to the assessment of the long-term biocompatibility of these polymers.     

Ageing properties of polyamide-12 pipes exposed to fuels with and without ethanol

The chemical and physical properties of polyamide-12 (PA12) fuel pipes/lines, aged for ≤2400 h at 110 °C, have been investigated. The pipes, containing fuel with or without ethanol, were either of a single PA12 layer, or of two PA12 layers surrounding a poly(vinylidene fluoride) barrier layer. The molar mass of the inner surface region obtained by size-exclusion chromatography was reduced during ageing, and optical microscopy revealed a surface that was partly dissolved in the presence of ethanol. Infrared spectroscopy revealed a rapid loss of plasticiser, especially in the presence of ethanol, and the fuel contained plasticiser and other polymer related components. Immersion tests at 60 °C showed that the swelling of the pipe and the amount of dissolved material were greatest for the fuels with intermediate ethanol content (50 vol.%). Aged samples experienced an increase in melting point, presumably, to a large extent, due to the loss of plasticiser and/or PA12-related components. In addition, for several samples, the crystallinity seemed to increase with ageing.     

Crystalline structure of polyamide 12 as revealed by solid‐state 13C NMR and synchrotron WAXS and SAXS

The crystalline structure of polyamide‐12 (PA12) was studied by solid‐state ¹³C nuclear magnetic resonance (NMR) as well as by synchrotron wide‐ and small‐angle X‐ray scattering (WAXS and SAXS). Isotropic and oriented PA12 showed different NMR spectra ascribed to γ‐ and γ′‐crystalline modifications, respectively. On the basis of the position of the first diffraction peak, the isotropic γ‐form and the oriented γ′‐form were shown to be with hexagonal crystalline lattice at room temperature. When heated, the two PA12 polymorphs demonstrated different behaviors. Above 140 °C, the isotropic γ‐PA12 partially transformed into α‐modification. No such transition was observed with the oriented γ′‐PA12 phase even after annealing at temperatures close to melting. A γ′–γ transition was observed here only after isotropization by melting point. Various structural parameters were extracted from the WAXS and SAXS patterns and analyzed as a function of temperature and orientation: the degree of crystallinity, the d‐spacings, the Bragg's long spacings, the average thicknesses of the crystalline (l_c) and amorphous (l_a) phases, and the linear crystallinity x_cl within the lamellar stacks. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3720–3733, 2005     

Temperature effect on the recovery of SO2-Poisoned GC/Nano-Pt electrode towards oxygen reduction

The SO₂ poisoning of Pt nanoparticle (n-Pt) modified glassy carbon (GC/n-Pt) electrode and the recovery of its activity for the oxygen reduction reaction (ORR) were studied using cyclic voltammetry at ambient (25 °C) and elevated (70 °C) temperatures. Recovery of the GC/n-Pt electrode by cycling the potential within the ORR range (1.0 to 0.2 V (standard hydrogen electrode)) in 0.1 M H₂SO₄ was not effective at 25 °C, but at 70 °C the onset potential of the ORR was almost the same as that at the fresh GC/n-Pt electrode. For the two different temperatures used here, the recovery on cycling the potential between 0.4 and 1.7 V was efficient. However, the number of cycles and the amount of charge required for the recovery at 70 °C were the smallest, which is of great interest for the proton exchange membrane fuel cell performance. The recovery using such a wide potential range at 70 °C resulted in an enhancement of the electrocatalytic activity of the GC/n-Pt electrode over a non-poisoned (bare) GC/n-Pt electrode.     

Study on damping properties of HVBR/EVM blends prepared by in situ polymerization

In comparison with normal damping rubbers such as natural rubber (NR), styrene butadiene rubber (SBR), isobutylene isoprene rubber (IIR) etc., Mo-based high vinyl polybutadiene rubber (HVBR) with high loss factor, excellent aging resistance and glass transition temperature closer to room temperature, is a promising damping material. The effective damping temperature range of HVBR could be further broadened by blending with ethylene-vinyl acetate (EVM) and the effects of blending methods (in situ polymerization blending or mechanical blending) and blending ratios on the damping properties and physical properties of HVBR/EVM blended rubber were studied. HVBR/EVM in situ polymerization blends was prepared by butadiene coordination polymerization by Mo-base catalyst in a toluene solution of EVM. The results of dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM) of the blended vulcanizates via in situ polymerization blending revealed that the compatibility between HVBR and EVM was improved compared with that of the blended vulcanizates via the traditional mechanical blending method. The two phases of HVBR/EVM in situ polymerization blends had good dispersion and uniformity, the damping temperature range was significantly expanded, and the peak and valley of the damping temperature range were greatly improved. A blending ratio of HVBR/EVM900 = 100/40 showed the best damping properties and the effective damping temperature range (tanδ>0.3) was extended from −6.6 °C to 39.4 °C.     

Synthesis and characterization of layered zinc hydroxychlorides

Layered material of zinc hydroxychlorides (Zn₅(OH)₈Cl₂·nH₂O: ZHC), which is one of the basic zinc salts (BZS), was synthesized from ZnO nano-particles aged with aqueous ZnCl₂ solutions at different temperatures ranging from 6 to 140 °C for 48 h. X-ray diffraction (XRD) results indicated that the diffraction peaks of ZnO completely disappeared by aging at 6 °C and the ZHC peaks were developed. By increasing the aging temperature, crystallinity of the layered structure was improved. At 6 °C, the ZHC particles were thin hexagonal plate particles with sizes ranging from 1 to 3 μm. The particle size of ZHC was independent of aging temperature. The atomic Cl/Zn ratios of all the ZHC materials were almost 0.2 less than 0.4 of the theoretical ratio, indicating that the synthetic ZHC is Cl-deficient. It seemed that half of Cl atoms in the layer were replaced with HCO₃⁻ and/or OH⁻. The specific surface areas of ZHC estimated from N₂ adsorption isotherms were ca. 10 m² g⁻¹ and were independent of the aging temperature. However, the H₂O monolayer adsorption capacity per unit surface area (n_w) for all the samples was higher than that of ZnO particles, revealing the high affinity of ZHC to H₂O molecules. The n_w values were increased by reducing the crystallinity of ZHC. This enhancement of H₂O adsorption selectivity was thought to be related with less-crystallized parts of the particles.     

Radiation-induced polymerization of hexafluoropropylene at high temperature and pressure

The radiation-induced polymerization of hexafluoropropylene was studied in the pressure and temperature ranges of 4,500–15,000 atm. and 100–230°C., respectively. Retardation was a serious problem; data thought to apply to the unretarded polymerization are summarized below. At 1,500 rad/hr. the polymerization rate was 15%/hr. at 230°C. and 15,000 atm. The activation enthalpy and volume are 9.5 kcal./mole and ?10 cc./mole, respectively. The rate varies as the square root of the radiation intensity. The largest intrinsic viscosity of the polymer is 2.0 dl./g.; values increase with temperature and pressure. At 130°C. and 10,000 atm. the intrinsic viscosity was the same at two radiation intensities.     

Effect of reaction temperature and pH on structural and morphological properties of hydroxyapatite from precipitation method

Hydroxyapatite nanoparticle plays a significant role in the field of biomedical industries such as tissue engineering and regenerative medicine, carriers for drug delivery, photocatalyst, biosensors, and membranes for heavy metal removal from polluted water. The present work aims to synthesize the hydroxyapatite from bio-waste materials like cuttlefish bone using a precipitation method by changing reaction temperatures (room temperature, 60 °C, 70 °C, and 80 °C), and pH (9,10,11, and 12). The structure, particle size, and crystallinity of the obtained HAp were evaluated by XRD analysis. The functional groups present in the HAp nanoparticles were analyzed and confirmed by FTIR spectroscopy. The surface morphology of the particles was analyzed by using FESEM and the particle sizes were ranging from 40 to 160 nm for different pH values. The elemental composition was determined by EDAX analysis. The antibacterial activity of the sample was tested against gram-positive and gram-negative bacteria. The zone of inhibition value against gram-negative bacteria was found to be 20 ± 0.32 mm and 16 ± 0.18 mm against gram-positive bacteria for the sample with a pH value of 10. The obtained results confirmed that the optimized temperature, time, and pH are suitable for the preparation of HAp with excellent desired properties, which is employed as a better candidate for biomedical applications.     

Processing polyamides with superheated water

Superheated water (shH₂O) is investigated as a process aid in conventional aliphatic polyamide (PA) systems. The polymers investigated include PA 6 (PA6), PA 6,6 (PA66), PA 6,12 (PA612), and PA 12 (PA12). It is shown that the PA melting and crystallization temperatures are significantly reduced when exposed to shH₂O. For example, the melting temperature of PA6 is depressed from 206 to 153 °C in the presence of shH₂O. A relationship between amide group density and thermal transition temperature reduction is observed. Processing these materials in shH₂O has led to a variety of materials ranging from low‐density foams to higher density locally anisotropic foamed morphologies. In situ observations of PAs melting in the presence of shH₂O are performed using a specially designed reactor. Results from these experiments are used to estimate the diffusion coefficient of shH₂O in PA6. Finally, low‐temperature extrusion is performed with PA6 and shH₂O at temperatures as low as 180 °C and mixture viscosity is estimated. A 20‐fold depression in the melt viscosity of PA6 is observed at 240 °C with shH₂O. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 803–813     

Uniaxial ratcheting behavior of hygrothermal aging anisotropic conductive adhesive film

A series of uniaxial ratcheting experiments on anisotropic conductive adhesive film (ACF) were conducted under stress-control at elevated temperature using a DMA-Q800. The ratcheting behavior of ACF specimens with different hygrothermal aging times was investigated at room temperature and 120 °C. The effects of loading rate, mean stress and stress amplitude on the ratcheting behavior of unaged and aged specimens were compared. The results show that the ratcheting strains of aged specimens are smaller than those of unaged specimens under the same experimental conditions. The cycling stability of aged specimens is increased by hygrothermal aging. At room temperature, with the increase of aging time, the ratcheting strains of aged specimens increase with hygrothermal aging time when it is less than or equal to 96 h but, however, decrease when it exceeds 96 h. At 120 °C the ratcheting strains of ACF only decrease with the increase of hygrothermal aging time. Additionally, the effects of loading rate, mean stress and stress amplitude on the ratcheting behavior of unaged and aged ACF are different and their effects are weakened by hygrothermal aging.     

Effect of gamma-irradiation and refrigerated storage on the improvement of quality and shelf life of pear (Pyrus communis L., Cv. Bartlett/William)

Gamma-irradiation alone and in combination with refrigeration was tested consecutively for 3 years for extending the shelf life of pear. Matured green pears were irradiated in the dose range of 0.8–2.0 kGy and stored under ambient (temperature 25±2 °C, RH 70%) and refrigerated (temperature 3±1 °C, RH 80%) conditions. Dose range of 1.5–1.7 kGy extended the storage life of pear by 14 days under ambient conditions. Control unirradiated pears were almost fully ripe within 8 days, while as the pears irradiated in the dose range of 1.5–1.7 kGy were fully ripe within 22 days of ambient storage. Irradiation dose of 1.5–1.7 kGy significantly inhibited the decaying of pears upto 16 days of ambient storage. Irradiation in combination with refrigeration prevented the decaying of pears upto 45 days as against the 35% decay in unirradiated samples. Irradiation dose of 1.5–1.7 kGy also gave an extension of 8 and 4 days during additional ambient storage of the pears following 30 and 45 days of refrigeration, respectively.     

Effects of posttreatment on the properties of modified PLLA/PDLA fibers

Poly(L ‐lactic acid)/poly(D ‐lactic acid) (PLLA/PDLA) blended with plasticizer poly(ethylene glycol) and nucleation agent TMC‐306 as‐spun fibers were prepared by melt spinning. The posttreatment was applied by hot drawing at 70°C and then heat‐treating at different temperatures for 30 minutes. In the process of hot drawing, orientation induced the further formation of the sc crystals and increased the degree of crystallinity of drawn fibers. When the hot drawing ratio reached 3 times, the properties of the fibers were relatively better. The highly oriented fibers containing pure sc crystals with high crystallinity were obtained by heat‐treating at a temperature above the melting point of α crystals. The posttreated PLLA/PDLA fibers with poly(ethylene glycol) and TMC‐306 (LDTP) obtained by hot drawing to 3 times at 70°C and then annealing at 170°C for 30 minutes exhibited the best antioxidative degradation and heat resistance properties. The initial decomposition temperature (T_5%) and heat resistance of posttreated LDTP fiber were about 94°C and 20°C higher than those of the commercial PLLA fiber, respectively.     

The effect of different substrate temperatures on the structure and luminescence properties of Y2O3:Bi3+ thin films

Y₂O₃:Bi³⁺ phosphor thin films were prepared by pulsed laser deposition in the presence of oxygen (O₂) gas. The microstructure and photoluminescence (PL) of these films were found to be highly dependent on the substrate temperature. X-ray diffraction analysis showed that the Y₂O₃:Bi³⁺ films transformed from amorphous to cubic and monoclinic phases when the substrate temperature was increased up to 600 °C. At the higher substrate temperature of 600 °C, the cubic phase became dominant. The crystallinity of the thin films, therefore, increased with increasing substrate temperatures. Surface morphology results obtained by atomic force microscopy showed a decrease in the surface roughness with an increase in substrate temperature. The increase in the PL intensities was attributed to the crystallinity improvement and surface roughness decrease. The main PL emission peak position of the thin films prepared at substrate temperatures of 450 °C and 600 °C showed a shift to shorter wavelengths of 460 and 480 nm respectively, if compared to the main PL peak position of the powder at 495 nm. The shift was attributed to a different Bi³⁺ ion environment in the monoclinic and cubic phases.     

Influence of biodegradation on crystallization of poly (butylene adipate‐co‐terephthalate)

The biodegradation of aromatic‐aliphatic biodegradable polyester poly (butylene adipate‐co‐terephthalate) (PBAT) was studied under mesophilic (37°C) and thermophilic (55°C) anaerobic conditions. Anaerobic sludge from municipal wastewater treatment plant was utilized as an inoculum. Non‐isothermal crystallization kinetics of PBAT before and after biodegradation was explored by differential scanning calorimetry. Under mesophilic anaerobic conditions (37°C), the biodegradation after 126 days was only 2.2%, molecular weight changed from 93 000 to 25 500 g/mol, and the crystallization behavior was changed only slightly. However, biodegradation under thermophilic anaerobic conditions (55°C) caused much bigger changes: biodegradation according to biogas production reached after 126 days 8.3%, molecular weight changed from 93 000 to 9430 g/mol, and the crystallization behavior was changed significantly. While T_m increased only slightly, T_c on the other hand increased significantly for the sample after biodegradation at 55°C. Also, the crystallization rate was slower (particularly at lower cooling rates), but crystallinity was slightly higher. The diffraction pattern was observed by X‐ray diffraction.     

Immobilization and Stabilization of Beta-Xylosidases from Penicillium janczewskii

β-Xylosidases are critical for complete degradation of xylan, the second main constituent of plant cell walls. A minor β-xylosidase (BXYL II) from Penicillium janczewskii was purified by ammonium sulfate precipitation (30% saturation) followed by DEAE-Sephadex chromatography in pH 6.5 and elution with KCl. The enzyme presented molecular weight (MW) of 301 kDa estimated by size exclusion chromatography. Optimal activity was observed in pH 3.0 and 70–75 °C, with higher stability in pH 3.0–4.5 and half-lives of 11, 5, and 2 min at 65, 70, and 75 °C, respectively. Inhibition was moderate with Pb⁺² and citrate and total with Cu⁺², Hg⁺², and Co⁺². Partially purified BXYL II and BXYL I (the main β-xylosidase from this fungus) were individually immobilized and stabilized in glyoxyl agarose gels. At 65 °C, immobilized BXYL I and BXYL II presented half-lives of 4.9 and 23.1 h, respectively, therefore being 12.3-fold and 33-fold more stable than their unipuntual CNBr derivatives (reference mimicking soluble enzyme behaviors). During long-term incubation in pH 5.0 at 50 °C, BXYL I and BXYL II glyoxyl derivatives preserved 85 and 35% activity after 25 and 7 days, respectively. Immobilized BXYL I retained 70% activity after 10 reuse cycles of p-nitrophenyl-β-D-xylopyranoside hydrolysis.

     

Control of thermal cross‐linking reactions and the degree of crystallinity of syndiotactic 1,2‐polybutadiene

Thermal stability, crystallization, morphological development, subsequently melting, and crystallinity control of a syndiotactic 1,2‐polybutadiene sample were carefully carried out by thermogravimetry (TGA), polarized optical microscopy (POM), differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), and wide‐angle X‐ray diffraction (WAXD), respectively. The experiments indicate that thermal cross‐linking reaction rates under nitrogen protection and in air are different for this polymer at temperature above 155 °C. Under nitrogen protection, the thermal cross‐linking reaction rate is delayed and the mechanism of melt crystallization obtained from the DSC results is in good accordance with that from POM observation. TMDSC results indicate that melting–recrystallization–melting model is more proper to explain the double melting events of this sample. At the same time, the evolution of the degree of crystallinity as the function of the time was investigated by WAXD profiles for the samples firstly crystallized at 145 °C for 1 h and then kept at 163 °C mediated between the temperatures of the double peaks. It shows that as prolonging the annealing time at 163 °C thermal cross‐linking reactions possibly occur, leading to gradual reduction of the apparent crystallite sizes, evaluated by Scherrer equation and the degree of crystallinity. The changing sequence of the relative intensity of the stronger four diffraction peaks with time due to thermal cross‐linking reactions is (111)/(201) > (210) > (010) > (200)/(110). © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2885–2897, 2005