Synthesis and characterization of La0.8Sr1.2Co0.5M0.5O4−δ (M=Fe, Mn)

The M⁴⁺-containing K₂NiF₄-type phases La_0.8Sr_1.2Co_0.5Fe_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O₄ have been synthesized by a sol–gel procedure and characterized by X-ray powder diffraction, thermal analysis, neutron powder diffraction and Mössbauer spectroscopy. Oxide ion vacancies are created in these materials via reduction of M⁴⁺ to M³⁺ and of Co³⁺ to Co²⁺. The vacancies are confined to the equatorial planes of the K₂NiF₄-type structure. A partial reduction of Mn³⁺ to Mn²⁺ also occurs to achieve the oxygen stoichiometry in La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6. La_0.8Sr_1.2Co_0.5Fe_0.5O_3.65 contains Co²⁺ and Fe³⁺ ions which interact antiferromagnetically and result in noncollinear magnetic order consistent with the tetragonal symmetry. Competing ferromagnetic and antiferromagnetic interactions in La_0.8Sr_1.2Co_0.5Fe_0.5O₄, La_0.8Sr_1.2Co_0.5Mn_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6 induce spin glass properties in these phases.     

Structural and magnetic characterisation of Aurivillius material Bi2Sr2Nb2.5Fe0.5O12

The n=3 Aurivillius material Bi₂Sr₂Nb_2.5Fe_0.5O₁₂ is investigated and combined structural refinements using neutron powder diffraction (NPD) and X-ray powder diffraction data (XRPD) data reveal that the material adopts a disordered, tetragonal (I4/mmm) structure at temperatures down to 2 K. Significant ordering of Fe³⁺ and Nb⁵⁺ over the two B sites is observed and possible driving forces for this ordering are discussed. Some disorder of Sr²⁺ and Bi³⁺ over the M and A sites is found and is consistent with relieving strain due to size mismatch. Highly anisotropic thermal parameters for some oxygen sites suggest that the local structure may be slightly distorted with some rotation of the octahedra. Magnetic measurements show that the material behaves as a Curie-Weiss paramagnet in the temperature range studied with no evidence of any long-range magnetic interactions. Solid solutions including Bi_3−xSr_xNb₂FeO₁₂, Bi₂Sr_2−xLa_xNb₂FeO₁₂ and Bi₂Sr₂Nb_3−xFe_xO₁₂ were investigated but single-phase materials were only successfully synthesised for a narrow composition range in the Bi₂Sr₂Nb_3−xFe_xO₁₂ system.     

Crystal structure, microstructure and reducibility of LaNixCo1−xO3 and LaFexCo1−xO3 Perovskites (0<x≤0.5)

Nickel and iron substituted LaCoO₃ with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 °C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo_1−xNi_xO₃ and LaCo_1−xFe_xO₃ were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 °C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo_1−xNi_xO₃ perovskites (x>0.1) annealed at 900 °C are reduced to Co/Ni transition metal and La₂O₃ via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo_1−xNi_xO₃ annealed at 600 °C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo_1−xFe_xO₃ with H₂ occurs by reduction of Co³⁺ to Co²⁺ prior to the Fe³⁺ ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites.     

Hexaferrites and phase relations in the iron-rich part of the system Sr-La-Co-Fe-O

The iron rich part of the system was examined in the temperature range of 1200-1380 °C in air, with focus on the solid solutions of M-type hexaferrites. Samples of suitable compositions were studied by electronprobe microanalysis (EPMA). Substituted Sr-hexaferrites in the system Sr-La-Co-Fe-O do not follow the 1:1 substitution mechanism of La/Co in M-type ferrites. Due to the presence and limited Co²⁺-incorporation Fe³⁺-ions are reduced to Fe²⁺ within the crystal lattice to obtain charge balance. In all examined M-type ferrites divalent iron is formed, even at 1200 °C. The substitution principle Sr²⁺+Fe³⁺↔La³⁺+(Fe²⁺, Co²⁺) yields to the general substitution formula for the M-type hexaferrite Sr²⁺_1-xLa³⁺_xFe²⁺_x-yCo²⁺_yFe³⁺_12-xO¹⁹ (0≤x≤1 and 0≤y≤x). In addition Sr/La-perovskite_SS (_SS=solid solution), Co/Fe-spinel_SS, hematite and magnetite are formed. Sr-hexaferrite exhibits at 1200 °C a limited solid solution with small amounts of Fe²⁺ (SrFe₁₂O₁₉↔Sr_0.3La_0.7Co_0.5Fe²⁺_0.2Fe_11.3O₁₉). At 1300 and 1380 °C a continuous solid solution series of the M-type hexaferrite is stable. SrFe₁₂O₁₉ and LaCo_0.4Fe²⁺_0.6Fe₁₁O₁₉ are the end members at 1300 °C. The maximum Fe²⁺O content is about 13 mol% in the M-type ferrite at 1380 °C (LaCo_0.1Fe²⁺_0.9Fe₁₁O₁₉).     

Redox behavior and transport properties of La0.5−2xCexSr0.5+xFeO3−δ and La0.5−2ySr0.5+2yFe1−yNbyO3−δ perovskites

The effects of doping the mixed-conducting (La,Sr)FeO_3−δ system with Ce and Nb have been examined for the solid-solution series, La_0.5−2xCe_xSr_0.5+xFeO_3−δ (x = 0–0.20) and La_0.5−2ySr_0.5+2yFe_1−yNb_yO_3−δ (y = 0.05–0.10). Mössbauer spectroscopy at 4.1 and 297 K showed that Ce⁴⁺ and Nb⁵⁺ incorporation suppresses delocalization of p-type electronic charge carriers, whilst oxygen nonstoichiometry of the Ce-containing materials increases. Similar behavior was observed for La_0.3Sr_0.7Fe_0.90Nb_0.10O_3−δ at 923–1223 K by coulometric titration and thermogravimetry. High-temperature transport properties were studied with Faradaic efficiency (FE), oxygen-permeation, thermopower and total-conductivity measurements in the oxygen partial pressure range 10⁻⁵–0.5 atm. The hole conductivity is lower for the Ce- and Nb-containing perovskites, primarily as a result of the lower Fe⁴⁺ concentration. Both dopants decrease oxide-ion conductivity but the effect of Nb-doping on ionic transport is moderate and ion-transference numbers are higher with respect to the Nb-free parent phase, 2.2 × 10⁻³ for La_0.3Sr_0.7Fe_0.9Nb_0.1O_3−δ cf. 1.3 × 10⁻³ for La_0.5Sr_0.5FeO_3−δ at 1223 K and atmospheric oxygen pressure. The average thermal expansion coefficients calculated from dilatometric data decrease on doping, varying in the range (19.0–21.2) × 10⁻⁶ K⁻¹ at 780–1080 K.     

La0.6Sr1.4MnO4 layered perovskite anode material for intermediate temperature solid oxide fuel cells

La_0.6Sr_1.4MnO₄ (LSMO₄) layered perovskite with K₂NiF₄ structure was prepared and evaluated as anode material for La_0.8Sr_0.2Ga_0.83Mg_0.17O_3 − δ (LSGM) electrolyte supported intermediate temperature solid oxide fuel cells (IT-SOFCs). X-ray diffraction results show that LSMO₄ is redox stability. Thermal expansion coefficient of LSMO₄ is close to that of LSGM electrolyte. By adopting LSMO₄ as anode and La_0.6Sr_0.4Co_0.8Fe_0.2O₃ (LSCF) as cathode, maxium power densities of 146.6, 110.9 mW cm^− 2 with H₂ fuel at 850, 800 °C and 47.3 mW cm^− 2 with CH₄ fuel at 800 °C were obtained, respectively. Further, the cell demonstrated a reasonably stable performance under 180 mA cm^− 2 for over 40 h with H₂ fuel at 800 °C.     

Synthesis and characterization of La0.8Sr1.2Co0.5M0.5O4−δ (M=Fe, Mn)

The M⁴⁺-containing K₂NiF₄-type phases La_0.8Sr_1.2Co_0.5Fe_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O₄ have been synthesized by a sol-gel procedure and characterized by X-ray powder diffraction, thermal analysis, neutron powder diffraction and Mössbauer spectroscopy. Oxide ion vacancies are created in these materials via reduction of M⁴⁺ to M³⁺ and of Co³⁺ to Co²⁺. The vacancies are confined to the equatorial planes of the K₂NiF₄-type structure. A partial reduction of Mn³⁺ to Mn²⁺ also occurs to achieve the oxygen stoichiometry in La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6. La_0.8Sr_1.2Co_0.5Fe_0.5O_3.65 contains Co²⁺ and Fe³⁺ ions which interact antiferromagnetically and result in noncollinear magnetic order consistent with the tetragonal symmetry. Competing ferromagnetic and antiferromagnetic interactions in La_0.8Sr_1.2Co_0.5Fe_0.5O₄, La_0.8Sr_1.2Co_0.5Mn_0.5O₄ and La_0.8Sr_1.2Co_0.5Mn_0.5O_3.6 induce spin glass properties in these phases.     

Mixed conductivity and Mössbauer spectra of (La0.5Sr0.5)1−xFe1−yAlyO3−δ (x=0-0.05, y=0-0.30)

Aluminum incorporation in the rhombohedrally distorted perovskite lattice of (La_0.5Sr_0.5)_1−xFe_1−yAl_yO_3−δ (x=0-0.05, y=0-0.30) decreases the unit cell volume and partial ionic and p-type electronic conductivities, while the oxygen nonstoichiometry and thermal expansion at 900-1200 K increase on doping. The creation of A-site cation vacancies has an opposite effect on the transport properties of Al-substituted ceramics. The maximum A-site deficiency tolerated by the (La,Sr)(Fe,Al)O_3−δ structure is however limited, close to 3-4%. The Mössbauer spectroscopy revealed progressive localization of electron holes and a mixed charge-compensation mechanism, which results in higher average oxidation state of iron when Al³⁺ concentration increases. The average thermal expansion coefficients of (La_0.5Sr_0.5)_1−xFe_1−yAl_yO_3−δ are (12.2-13.0)×10⁻⁶ K⁻¹ at 300-900 K and (20.1-30.0)×10⁻⁶ K⁻¹ at 900-1200 K in air. The steady-state oxygen permeability (OP) of dense Al-containing membranes is determined mainly by the bulk ionic conductivity. The ion transference numbers at 973-1223 K in air, calculated from the oxygen permeation and faradaic efficiency (FE) data, vary in the range 1×10⁻⁴-3×10⁻³, increasing with temperature.     

Synthesis and characterization of Sr0.75Y0.25Co1−xMxO2.625+δ (M=Ga, 0.125?x?0.500 and M=Fe, 0.125?x?0.875)

The effect of replacing Co³⁺ by Ga³⁺ and Fe³⁺ in the perovskite-related tetragonal phase Sr_0.75Y_0.25CoO_2.625 with unit cell parameters: a=2a_p, and c=4a_p (314 phase) has been investigated. The 314 phase is formed by Sr_0.75Y_0.25Co_1−xM_xO_2.625+δ, with x?0.375 for M=Ga and x?0.625 for M=Fe. High-resolution transmission electron microscopy and electron diffraction revealed frequent microtwinning in the iron-containing compounds, in contrast to the Ga-substituted 314 phases. Diffraction experiments and electron microscope images indicated that at higher Fe contents, 0.75?x?0.875, a disordered cubic perovskite structure forms. The crystal structures of Sr_0.75Y_0.25Co_0.75Ga_0.25O_2.625 and Sr_0.75Y_0.25Co_0.5Fe_0.5O_2.625+δ were refined using neutron powder diffraction data. It was found that the oxygen content of Sr_0.75Y_0.25Co_0.5Fe_0.5O_2.625+δ is higher than in Fe-free 314 phase, so that δ corresponds to 0.076, whereas δ=0 in Sr_0.75Y_0.25Co_0.75Ga_0.25O_2.625+δ. Magnetization measurements on the unsubstituted Sr_0.7Y_0.3CoO_2.62 and Ga-substituted Sr_0.75Y_0.25Co_0.75Ga_0.25O_2.625 compounds indicate the presence of a ferromagnetic-like contribution to the measured magnetization at 320 and 225 K, respectively, while replacing Co by Fe leads to the suppression of this contribution. A neutron diffraction study shows that the Sr_0.75Y_0.25Co_0.5Fe_0.5O_2.625+δ compound is G-type antiferromagnetic at room temperature, whereas Sr_0.75Y_0.25Co_0.75Ga_0.25O_2.625 does not exhibit magnetic ordering at room temperature.     

Synthesis and characterization of the K2NiF4 phases La1+xSr1−xCo0.5Fe0.5O4−δ (x=0, 0.2)

The K₂NiF₄ phases LaSrCo_0.5Fe_0.5O₄ and La_1.2Sr_0.8Co_0.5Fe_0.5O₄, and their reduced forms LaSrCo_0.5Fe_0.5O_3.75 and La_1.2Sr_0.8Co_0.5Fe_0.5O_3.85, have been successfully prepared by solid-state reactions, followed by reduction in 10% H₂/N₂ in order to produce oxygen-deficient materials. All materials crystallize in a tetragonal K₂NiF₄ structure (space group I4/mmm) with Co and Fe randomly distributed over the B-sites of the structure. Mössbauer spectra have confirmed the trivalent state of Fe in these materials. In the reduced materials, oxide ion vacancies are confined to the equatorial planes of the K₂NiF₄ structure and the Co is present almost entirely as Co²⁺ ions; low-temperature neutron powder diffraction data reveal that these reduced phases are antiferromagnetically ordered with a tetragonal noncollinear arrangement of the moments. The Co³⁺ ions, present in stoichiometric LaSrCo_0.5Fe_0.5O₄ and La_1.2Sr_0.8Co_0.5Fe_0.5O₄, inhibit magnetic order and are assumed to be in the low-spin state.     

Preparation and Characterization of Single-Phase Perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ

Single-phase perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ has been successfully prepared by using citrate-EDTA complexation method at relatively low calcination temperature. The structure and thermal decomposition process of the complex precursor have been investigated by means of differential scanning calorimetry-thermal gravimetric analysis (DSC/TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopic (FT-IR) measurements. The precursor decomposed completely and started to form perovskite-type oxide above 420℃ according to the differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results. Single-phase perovskite La0.6Sr0.4Co0.8Fe0.2O3-δ obtained has been confirmed from the XRD pattern, and no peak of SrCO3 was found by XR.D of the oxides synthesized at a relatively low temperature of 800 ℃. The reducibility of La0.6Sr0.4Co0.8Fe0.2O3-δ was also characterized by the temperature programmed reduction (TPR) technique. Disk shaped dense La0.6Sr0.4Co0.8Fe0.2O3-δ membrane was prepared by the isostatical pressing method. The oxygen flux rate of dense La0.6Sr0.4Co0.8Fe0.2O3-δ membrane was (2.8-18)×10-8 mol/(cm2·s) in the temperature range of 800-1 000℃.     

Electron-doping through La-for-Sr substitution in (Sr1−xLax)2FeTaO6: Effects on the valences and ordering of the B-site cations, Fe and Ta

We have employed aliovalent A-site cation substitution, La^III-for-Sr^II, to dope the Sr(Fe_0.5Ta_0.5)O₃ perovskite oxide with electrons. Essentially single-phase samples of (Sr_1−xLa_x)(Fe_0.5Ta_0.5)O₃ were successfully synthesized up to x≈0.3 in a vacuum furnace at 1400 °C. The samples were found to crystallize (rather than with orthorhombic symmetry) in monoclinic space group P2₁/n that accounts for the partial ordering of the B-site cations, Fe and Ta. With increasing La-substitution level, x, the degree of Fe/Ta order was found to increase such that the La-richest compositions are best described by the B-site ordered double-perovskite formula, (Sr,La)₂FeTaO₆. From Fe L₃ and Ta L₃ XANES spectra it was revealed that upon electron doping the two B-site cations, Fe^III and Ta^V, are both prone to reduction. Magnetic susceptibility measurements showed spin-glass type behaviour for all the samples with a transition temperature slightly increasing with increasing x.     

La1-xSrxFeO3钙钛矿型氧化物中的晶格氧用于甲烷部分氧化制合成气

采用燃烧法制备了Sr掺杂钙钛矿型氧化物La_1-xSr_xFeO₃（x=0,0.3,0.5,0.9）载氧体,对载氧体分别进行X射线衍射、扫描电镜和H₂程序升温还原反应表征,在热重循环装置和固定床反应装置上考察甲烷与载氧体晶格氧的部分氧化反应.结果表明,La_1-xSr_xFeO₃氧化物中的晶格氧适用于甲烷部分氧化制合成气,晶格氧的得失是一个可逆过程,Sr的掺杂提高了载氧体的供氧能力,5次循环后载氧体得失晶格氧的能力没有明显的衰减.从甲烷转化率、n（H₂）/n（CO）比以及H₂和CO的选择性等方面来考虑,x=0.3-0.5比较理想,甲烷转化率维持在70%左右,气体产物中n（H₂）/n（CO）约为2,CH₄没有发生明显的裂解.     

Synthesis, structure and magnetic properties of the pillared perovskites La5Re3MO16(M=Mg, Fe, Co, Ni)

Four new compounds La₅Re₃MgO₁₆ La₅Re₃FeO₁₆ La₅Re₃CoO₁₆ La₅Re₃NiO₁₆ have been prepared by solid-state reaction and characterized by X-ray and neutron powder diffraction and SQUID magnetometry. Rietveld refinement revealed that the four compounds are isostructural with La₅Re₃MnO₁₆ and crystallize in space group with cell parameters a=7.9370(3), 7.9553(5), 7.9694(7), and 7.9383(4) Å; b=7.9998(3), 7.9960(6), 8.0071(8), and 7.9983(5) Å; c=10.1729(4), 10.1895(7), 10.182(1), and 10.1732(6) Å; α=90.190(3)°, 90.270(3)°, 90.248(4) °, 90.287(3)°; β=94.886(2)°, 95.082(3)°, 94.980(4)°, 94.864(3)°; γ=89.971(4)°, 90.001(5)°, 89.983(6)°, 89.968(4)° for Mg, Fe, Co, and Ni, respectively. The structures are related to a layered perovskite. The layers of corner-sharing octahedra Re⁵⁺M²⁺O₆ (M²⁺=Mg, Fe, Co, Ni) are pillared by diamagnetic edge-sharing octahedra dimers, Re₂O₁₀, involving a Re=Re double bond. Three crystallographically independent lanthanum atoms occupy the three-dimensional interstices. All compounds obey the Curie-Weiss law at sufficiently high temperatures with Curie constants or effective magnetic moments near the expected values for the combination of Re⁵⁺(S=1) and M²⁺(S=0, 2, 3/2, 1 for Mg, Fe, Co, and Ni, respectively). Weiss constants, θ_C, are negative (−575, −84, −71, and −217 K for Mg, Fe, Co, and Ni, respectively) indicating the predominance of antiferromagnetic exchange coupling. The phases for M=Fe, Co and Ni show long-range order at 155, 33, 36 and 14 K, respectively. Neutron diffraction discloses a magnetic structure for the Fe series member consisting of ferrimagnetic perovskite layers coupled antiparallel along the stacking c-axis, direction which is consistent with the magnetic structure found recently for La₅Re₃MnO₁₆.     

Valence state of the Fe ions in Sr1−yLayFeO3

The Sr²⁺_1?yLa³⁺_yFeO₃ system with 0.1 ≦ y ≦ 0.6 has been studied mainly by the Mössbauer effect. The results are discussed referring to the Ca_1?xSr_xFeO₃ system. The following four kinds of electronic phases have been observed: the paramagnetic and the antiferromagnetic average valence phases and the corresponding mixed valence phases. Two kinds of Fe ions coexist, in general, in the mixed valence phases. In the antiferromagnetic mixed valence phase, typically at 4 K, the magnetic hyperfine field and the center shift each takes a wide range of value depending on the composition, while a beautiful correlation is kept between them. The extreme values are close to those expected for Fe³⁺ and Fe⁵⁺. The appropriate chemical formulas are, therefore, Ca_1?xSr_xFe^(3+Δ)+_0.5Fe^(5?Δ)+_0.5O₃ and $\text{Sr}{}_{\mathrm{1?y}}\text{La}{}_{\mathrm{y}}\text{Fe}{}^{\mathrm{(3+\delta )+}}{}_{\mathrm{<mtext>(1+y)</mtext><mtext>2</mtext>}}\text{Fe}{}^{\mathrm{(5?\delta )+}}{}_{\mathrm{<mtext>(1?y)</mtext><mtext>2</mtext>}}\text{O}{}_3$.     

Synthesis, Crystal and Magnetic Structures of the Sodium Ferrate (IV) Na4FeO4 Studied by Neutron Diffraction and Mössbauer Techniques

The alkali sodium ferrate (IV) Na₄FeO₄ has been prepared by solid-state reaction of sodium peroxide Na₂O₂ and wustite Fe_1−xO, in a molar ratio Na/Fe=4, at 400°C under vacuum. Powder X-ray and neutron diffraction studies indicate that Na₄FeO₄ crystallizes in the triclinic system P−1 with the cell parameters= a=8.4810(2) Å, b=5.7688(1) Å, c=6.5622(1) Å, α=124.662(2)°, β=98.848(2)°, γ=101.761(2)° and Z=2. Na₄FeO₄ is isotypic with the other known phases Na₄MO₄ (M=Ti, Cr, Mn, Co and Ge, Sn, Pb). The solid solution Na₄Fe_xCo_1−xO₄ exists for x=0-1 and we have followed the evolution of the cell parameters with x to determine the lattice parameters of the triclinic cell of Na₄FeO₄. A three-dimensional network of isolated FeO₄ tetrahedra connected by Na atoms characterizes the structure. This compound is antiferromagnetic below T_N=16 K. At 2 K the magnetic cell is twice the nuclear cell and the magnetic structure is collinear (μ_Fe=3.36(12) μ_B at 2 K). This black compound is highly hygroscopic. In water or on contact with the atmospheric moisture it is disproportionated in Fe³⁺ and Fe⁶⁺. The Mössbauer spectra of Na₄FeO₄ are fitted with one doublet (δ=− 0.22 mm/s, Δ=0.41 mm/s at 295 K) in the paramagnetic state and with a sextet at 8K. These parameters characterize Fe⁴⁺ high-spin in tetrahedral FeO₄ coordination.     

Thermochemistry of La0.7Sr0.3Mn1−xFexO3 solid solutions (0<x<1)

The structure, the energetics and the internal redox reactions of La_0.7Sr_0.3Fe_xMn_1−xO₃ have been studied in the complete solid solution range 0.0<x<1.0. High temperature oxide melt drop solution calorimetry was performed to determine the enthalpies of formation from binary oxides and the enthalpy of mixing. There is a noticeable change in the energetics of the solid solution near x=0.7, which is due to the growing concentration of Fe⁴⁺ at higher Fe/(Fe+Mn) ratio. The balance between different valences of the transition metals, Mn and Fe, is the main factor in determining the energetics of the La_0.70Sr_0.30Fe_xMn_1−xO₃ solid solution.     

Investigations of the magnetic properties and structures of the pillared perovskites, La5Re3MO16 (M=Co, Ni)

La₅Re₃CoO₁₆ and La₅Re₃NiO₁₆ were synthesized by solid-state reaction and studied by SQUID magnetometry, heat capacity and powder neutron diffraction measurements. These two compounds belong to a series of isostructural Re-based pillared perovskites [Chi et al. J. Solid State Chem. 170 (2003) 165]. Magnetic susceptibility measurements indicate apparent short-range ferri or ferromagnetic correlations and possible long-range antiferromagnetic order for La₅Re₃CoO₁₆ at 35 K, and at 38 and 14 K for La₅Re₃NiO₁₆. Heat capacity measurements of the Co compound show a lambda anomaly, typical of long-range magnetic order, at 32 K. In contrast, the Ni compound displays a broader, more symmetric feature at 12 K in the heat capacity data, indicative of short-range magnetic order. Low-temperature powder neutron diffraction revealed contrasting magnetic structures. While both show an ordering wave vector, k=(0,0,1/2), in La₅Re₃CoO₁₆, the Co²⁺ and Re⁵⁺ moments are ordered ferrimagnetically within the corner-shared octahedral layers, while the layers themselves are coupled antiferromagnetically along the c-axis, as also found in La₅Re₃MnO₁₆ and La₅Re₃FeO₁₆. In the case of the Ni material, the Re⁵⁺ and Ni²⁺ moments in the perovskite layers couple ferromagnetically and are canted 30° away from the c-axis, angled 45° in the ab-plane. The layers then couple antiferromagnetically at low temperature, a unique magnetic structure for this series. The properties of the La₅Re₃MO₁₆ series, with M=Mn, Fe, Co, Ni and Mg are also reviewed.     

Synthesis crystal structure and ionic conductivity of Ca0.5Bi3V2O10 and Sr0.5Bi3V2O10

Two new compounds Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀ have been synthesized in the ternary system: MO-Bi₂O₃-V₂O₅ system (M=M²⁺). The crystal structure of Sr_0.5Bi₃V₂O₁₀ has been determined from single crystal X-ray diffraction data, space group and Z=2, with cell parameters a=7.1453(3) Å, b=7.8921(3) Å, c=9.3297(3) Å, α=106.444(2)°, β=94.088(2)°, γ=112.445(2)°, V=456.72(4) Å³. Ca_0.5Bi₃V₂O₁₀ is isostructural with Sr_0.5Bi₃V₂O₁₀, with, a=7.0810(2) Å, b=7.8447(2) Å, c=9.3607(2) Å, α=106.202(1)°, β=94.572(1)°, γ=112.659(1)°, V=450.38(2) Å³ and its structure has been refined by Rietveld method using powder X-ray data. The crystal structure consists of infinite chains of (Bi₂O₂) along c-axis formed by linkage of BiO₈ and BiO₆ polyhedra interconnected by MO₈ polyhedra forming 2D layers in ac plane. The vanadate tetrahedra are sandwiched between these layers. Conductivity measurements give a maximum conductivity value of 4.54×10⁻⁵ and 3.63×10⁻⁵ S cm⁻¹ for Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀, respectively at 725 °C.     

p-Type electron transport in La1−xSrxFeO3−δ at high temperatures

Electrical conductivity, thermopower and oxygen content were measured for La_1−xSr_xFeO_3−δ (x=0.2, 0.5, 0.9) within the oxygen partial pressure range 10⁻⁴-0.5 atm and at temperatures 750-950 °C. The dominating charge carriers under these experimental conditions are electron holes. The results of oxygen nonstoichiometry measurements are used to estimate the concentration of holes and to analyze data on conductivity and thermopower. The changes in thermopower are described by the model assuming that the number of sites accessible for migration of holes is independent on oxygen content. The mobility of electron holes is calculated, and it is found to be virtually independent on temperature in the compositions with x<0.5 while compositions with x>0.5 exhibit thermally activated mobility and mobility values about 0.1 cm² V⁻¹ s⁻¹ or smaller. It is suggested that the main contribution to the composition dependent variations in electron hole mobility are associated with Coulomb interactions at small x's, whereas at high degrees of doping the mobility of holes is most strongly affected by the increasing amount of oxygen vacancies.