Some problems in adsorption and calorimetric studies of the steps of catalytic processes

Principal side factors as well as technical and procedural peculiarities capable of distorting the results of measurements of adsorbed and desorbed amounts, of falsifying the nature of the processes proceeding in the systems under study, and of promoting artifacts in calorimetric and other studies of gas chemisorption on powders are considered. Modified techniques and procedures allowing the elimination of sources of side phenomena and artifacts and freeing traditional glass static adsorption apparatuses and experimental procedures from undesirable factors and peculiarities are proposed. Some available chemisorption and calorimetric data representing artifacts and also some data that are not artifacts but,due to imperfections of chemisorption techniques, show up as artifacts are presented and discussed. Several applications of the improved techniques and procedures to calorimetric and adsorption studies of the steps of catalytic processes proceeding on the basis of natural gas and of products of its processing are presented and discussed.     

Spectrophotometric study of the reaction mechanism between DDQ Pi- and iodine sigma-acceptors and chloroquine and pyrimethamine drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of anti-malarial drugs, chloroquine phosphate (CQP) and pyrimethamine (PYM), in pure and in different pharmaceutical preparations. The charge transphere (CT) reactions between CQP and PYM as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and iodine sigma-acceptor reagents to give highly coloured complex species have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer' law is obeyed over the concentration range of 1.0-15 microg ml(-1) for CQP and 1.0-40 microg ml(-1) for PYM using I(2) and at 5.0-53 microg ml(-1) for CQP and 1.0-46 microg ml(-1) for PYM using DDQ reagents, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 10-53 and 8-46 microg ml(-1) for CQP and PYM using DDQ, respectively and 5-15 and 8-40 microg ml(-1) for CQP and PYM using iodine, respectively. The Sandell sensitivity is found to be 0.038 and 0.046 g cm(-2) for DDQ method and 0.0078 and 0.056 g cm(-2) for I(2) method for CQP and PYM, respectively which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.012-0.014 and 0.013-0.015) and relative standard deviation (R.S.D.=0.09-1.4 and 1.3-1.5%) (n=5) for DDQ and I(2) methods respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between day precision of percent recovery of 99-100.6%, and 98-101% for CQP and PYM by DDQ method and 99-102% and 99.2-101.4% for CQP and PYM by I(2) method respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of CQP and PYM in raw materials and in pharmaceutical preparations.     

Molecular weight and monosaccharide composition of Astragalus polysaccharides

Two polysaccharides (APS-I and APS-II) were isolated from the water extract of Radix Astragali and purified through ethanol precipitation, deproteination and by ion-exchange and gel-filtration chromatography. Their molecular weight was determined using high performance liquid chromatography and gel permeation chromatography (HPLC-GPC) and their monosaccharide composition was analyzed by TLC and HPLC methods, using a refractive index detector (RID) and an NH(2) column. It was shown that APS-I consisted of arabinose and glucose and APS-II consisted of rhamnose, arabinose and glucose, in a molar ratio of 1:3.45 and 1:6.25:17.86, respectively. The molecular weights (Mw) of APS-I and APS-II were 1,699,100 Da and 1,197,600 Da, respectively.     

胶体与界面化学的研究进展

胶体与界面化学是研究胶体分散体系和界面现象的一门科学,在能源、材料、生物、化学制造和环境科学等领域具有广泛的应用。近年来,由于先进功能材料、仿生学和生物医药等学科的迅速发展,在纳米尺寸(胶体)的范围内进行分子组装和材料的制备已经引起了人们的高度关注。过去两年里,中国胶体与界面化学领域的科学家的创新性研究工作层出不穷,国际影响力日益提升,所获得的研究成果越来越受到国际同行的关注。这些成果可概括为:(1)系列新型有序分子组合体的构建及其在生物医药领域的应用,尤其是超分子组装、表面图案化有序组装材料的设计和应用;(2)胶体与界面化学方法在微纳米功能材料合成中的应用,包括形貌可控的无机材料、有机-无机复合功能材料、贵金属纳米材料以及小分子凝胶的合成及其应用;(3)胶体与界面化学在生物传感领域的新应用;(4)胶体与界面化学研究新方法。作为一门与实际应用密切结合的学科,现代经济社会为胶体与界面化学的发展提供了广阔的空间。可以预期,未来胶体与界面化学将更注重其基本的物理化学问题,如:新颖有序分子组合体的构建和理论认识;功能性微纳米材料界面结构与性能调控的理论指导。此外,新的手段和方法在胶体与界面体系的不断渗透,将不断产生新的学科交叉点,从而有力地促进胶体与界面化学的学科发展。共引用参考文献96篇。     

Indolizidine and quinolizidine alkaloids

This review covers the isolation, structure determination, synthesis and biological activity of indolizidine and quinolizidine alkaloids from microbial, plant and animal sources. Included in the review are slaframine; hydroxylated indolizidines and their analogues; alkaloids from ants and amphibians; metabolites of the genera Prosopis, Streptomyces and Nuphar and the Lythraceae; phenanthroindolizidines and related alkaloids; lupin alkaloids; and alkaloids from sponges. tunicates and coccinellid beetles. The literature from July 2000 to June 2001 is reviewed, and 172 references are cited.     

Fluorescence analysis of humic and fulvic acids from two Brazilian oxisols as affected by biosolid amendment

Conventional monodimensional fluorescence spectroscopy in the emission, excitation, and synchronous-scan modes and total luminescence spectroscopy have proven to be sensitive techniques for characterization and differentiation of humic acid (HA) and fulvic acid (FA) fractions isolated from an aerobically and anaerobically digested and limed biosolid, two layers of a sandy and a clayey Brazilian oxisol, and the corresponding biosolid-amended soils. The spectral patterns and the relative fluorescence intensities suggest greater molecular heterogeneity, less aromatic polycondensation, and less humification of biosolid HA and FA compared with soil HA and FA. However, the differences are smaller for the FA fractions than for the HA fractions. Fluorescence properties of soil HA and FA differ slightly as a function of soil type and soil layer. Biosolid application causes a shift to shorter wavelengths of the main fluorescence peaks and marked variation of the relative fluorescence intensities of HA and FA isolated from amended soils. These results suggest that molecular components of relatively small molecular size, with a low level of aromatic polycondensation, and low degree of humification present in biosolid HA and FA are partially and variously incorporated into amended soil HA and FA. In general, these modifications seem to be smaller in HA and FA from the clayey soil layers than in those from the sandy soil layers, possibly because of protective effects exerted by clay minerals of native soil HA and FA against disturbances caused by biosolid application.     

Determination of traces of carbon, nitrogen and oxygen in molybdenum and tungsten

The determination of carbon and nitrogen in molybdenum and of carbon, nitrogen and oxygen in tungsten, is described. The analytical techniques applied were charged-particle activation (carbon, nitrogen and oxygen), photon activation (carbon and oxygen), combustion (carbon) and vacuum-fusion extraction (nitrogen and oxygen). Chemical methods yielded upper limits in the 2-5 mug/g range. Activation analysis yielded 100 and 8 ng/g for carbon in molybdenum and tungsten respectively, 500 and 74 ng/g for nitrogen in molybdenum and tungsten respectively and 70 ng/g for oxygen in tungsten. The results obtained by charged-particle and photon activation agreed satisfactorily.     

Prediction of the Quality of Petroleum Bitumens

The common and specific features of quality standard and substandard bitumens were studied by elemental analysis and by determining the yield and composition of toluene-insoluble substances, the composition and concentration of impurities in standard and substandard bitumens, and the group composition of bitumens before and after aging.     

Simultaneous determination of carvedilol and ampicillin sodium by first-derivative fluorometry in the presence of human serum albumin.

A sensitive and selective method for the simultaneous determination of carvedilol and ampicillin sodium (AS) in the presence of human serum albumin (HSA) is described. The maximum emission wavelengths of carvedilol and AS are at 357 nm and 426 nm with excitation at 254 nm, respectively. The first-derivative peaks of carvedilol and AS were at 337 nm and 398 nm, respectively. The linear-regression equations of the calibration graphs of carvedilol and AS were C = 0.0001H - 0.0063 and C = 1.530H - 43.84; the correlation coefficients were 0.9990 and 0.9986, respectively. The detection limits were 1 ng ml(-1) for carvedilol and 23 microg ml(-1) for AS, respectively. The effects of the pH, the stability of carvedilol and AS and foreign ions on the determination of carvedilol and AS were examined. The recoveries of carvedilol and AS were measured. This method is simple and can be used for the determination of carvedilol and AS in human serum and urine samples with satisfactory results.     

Physicochemical conditions for effective hydrogen isotope storage and delivery in a uranium bed

This paper proposes physicochemical conditions for effective hydrogen isotope storage and delivery in a uranium bed. Effective physicochemical conditions for tritium storage and delivery are obtained by manipulating initial depleted uranium (DU) temperatures and hydrogen pressures and applying three distinct operation scenarios. These novel physicochemical conditions and operation scenarios enable higher and more constant hydrogen recovery and delivery rates. The results presented can be used to facilitate the storage and delivery of tritium for environmental protection and waste management in nuclear fission reactors, and for future commercial use in isotope industries and nuclear fusion fuel systems.     

含硒食品的生理功效及合理利用

对含硒食品的生理功效及合理开发利用进行了论述和探讨，根据国内外资料，认为硒具有防治癌症和治疗其它疾病的生理功效．     

Accurate measurement and physical insight: The X-ray extended range technique for fundamental atomic physics,condensed matter research and biological sciences

Research in core physics or atomic and condensed matter science is increasingly relevant for diverse fields and are finding application in chemistry, engineering and biological sciences, linking to experimental research at synchrotrons, reactors and specialised facilities. Over recent synchrotron experiments and publications we have developed methods for measuring the absorption coefficient far from the edge and in the XAFS (X-ray absorption fine structure) region in neutral atoms, simple compounds and organometallics reaching accuracies of below 0.02%. This is 50–500 times more accurate than earlier methods, and 50–250 times more accurate than claimed uncertainties in theoretical computations for these systems. The data and methodology are useful for a wide range of applications, including major synchrotron and laboratory techniques relating to fine structure, near-edge analysis and standard crystallography. Experiments are sensitive to theoretical and computational issues, including correlation between convergence of electronic and atomic orbitals and wavefunctions. Hence, particularly in relation to the popular techniques of XAFS and XANES (X-ray absorption near-edge structure), this development calls for strong theoretical involvement but has great applications in solid state structural determination, catalysis and enzyme environments, active centres of biomolecules and organometallics, phase changes and fluorescence investigations and others. We discuss key features of the X-ray extended range technique (XERT) and illustrate applications.     

Recent developments and applications of capillary and microchip electrophoresis in proteomics and peptidomics (mid-2018–2022)

This review gives a wide overview of recent advances and applications of capillary electrophoresis and microchip capillary electrophoresis methods in the fields of proteomics and peptidomics in the period from mid-2018 up to the end of 2022. The methodological topics covering sample preparation and concentration techniques, hyphenation of capillary electrophoresis methods with mass spectrometry, and multidimensional separations by on-line or off-line coupled different capillary electrophoresis and liquid chromatography techniques are described and new developments in both bottom-up and top-down approaches in proteomics are presented. In addition, various applications of capillary electrophoresis methods in proteomic and peptidomic studies are demonstrated. They include monitoring of protein posttranslational modifications and applications in biological and biochemical research, clinical peptidomics and proteomics, and food analysis.     

Kinetics and thermodynamics of the adsorption of some dyestuffs and p-nitrophenol by chitosan and MCM-chitosan from aqueous solution

The effect of initial concentration, temperature, and shaking rate on the adsorption of three dyestuffs [orange II (O-II), crystal violet (CV), and reactive blue 5 (RB5)] and an ideal adsorbate, p-nitrophenol (PNP), by chitosan (Sigma C-3646) and the effect of temperature on the adsorption of O-II and CV by monocarboxymethylated chitosan (MCM-chitosan) were investigated. Kinetic data obtained for the adsorption of each dyestuff and PNP by chitosan and of O-II and CV by MCM-chitosan at different temperatures were applied to the Lagergren equation, and adsorption rate constants (k(ads)) at these temperatures were determined. These rate constants related to the adsorption of O-II and RB5 by chitosan and of O-II by MCM-chitosan were applied to the Arrhenius equation, and activation energies (E(a)) were determined. In addition, the isotherms for adsorption, at different temperatures, of each dyestuff and PNP by chitosan and of O-II and CV by MCM-chitosan were also determined. These isothermal data were applied to linear forms of isotherm equations that they fit, and isotherm constants were calculated. Because the isotherm curves obtained for the adsorption of O-II and CV by chitosan and of CV by MCM-chitosan fit the Langmuir adsorption isotherm, b constants were applied to thermodynamic equations, and thermodynamic parameters (delta G, delta H, and delta S) were calculated. Lastly, chitosan and MCM-chitosan were compared with respect to the ability to take up the dyestuffs and PNP.     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting mineral composition (Ca,K, P,Fe, Mn,Na, Zn), protein and moisture in alfalfa

In the present work we study the use of near-infrared spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for the analysis of major (Ca, K, P) and minor (Fe, Mn, Na, Zn) elements, protein and moisture in alfalfa. The method allows immediate analysis of the alfalfa without prior sample treatment or destruction through direct application of the fibre-optic probe on ground samples in the case of the mineral composition and on-ground and compacted (baled) samples in the case of protein and humidity. The regression method employed was modified partial least-squares (MPLS). The calibration results obtained using samples of alfalfa allowed the determination of Ca, K, P, Fe, Mn, Na and Zn, with a standard error of prediction (SEP(C)) and a correlation coefficient (RSQ) expressed in mg/kg of alfalfa of 1.37 × 10³ and 0.878 for Ca, 1.10 × 10³ and 0.899 for K, 227 and 0.909 for P, 103 and 0.948 for Fe, 5.1 and 0.843 for Mn, 86.2 and 0.979 for Na, and of 1.9 and 0.853 for Zn, respectively. The SEP(C) and RSQ values (in %) for protein and moisture in ground samples were 0.548 and 0.871 and 0.150 and 0.981, respectively; while in the compacted samples they were 0.564 and 0.826 and 0.262 and 0.935, respectively. The prediction capacity of the model and the robustness of the method were checked in the external validation in alfalfa samples of unknown composition, and the results confirmed the suitability of the method.     

Spectrophotometric study of the reaction mechanism between DDQ as pi-acceptor and potassium iodate and flucloxacillin and dicloxacillin drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of beta-lactam drugs, flucloxacillin (Fluclox) and dicloxacillin (Diclox), in pure and in different pharmaceutical preparations. The charge transfer (CT) reactions between Fluclox and Diclox as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and potassium iodate via oxidation reduction reaction where the highly coloured complex species or the liberated iodine have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 2-450 microg ml(-1) for Fluclox and 10-450 microg ml(-1) for Diclox using DDQ reagent and at 50-550 microg ml(-1) for Fluclox and 50-560 microg ml(-1) for Diclox using iodate method, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 6-450 and 15-450 microg ml(-1) for Fluclox and Diclox using DDQ, respectively, and 65-550 and 63-560 microg ml(-1) for Fluclox and Diclox using iodine, respectively. The Sandell sensitivity is found to be 0.018 and 0.011 microg cm(-2) for DDQ method and 0.013 and 0.011 microg cm(-2) for iodate method for Fluclox and Diclox, respectively, which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.01-0.80 and 0.07-0.98) and relative standard deviation (R.S.D.=0.13-0.44 and 0.11-0.82%) (n=5) for DDQ and iodate methods, respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between-day precision of percent recovery of 99.87-100.2 and 99.90-100% for Fluclox and Diclox by DDQ method and 99.88-100.1 and 99.30-100.2% for Fluclox and Diclox by iodate method, respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of Fluclox and Diclox in raw materials and in pharmaceutical preparations.     

Fluorocinnoline derivatives. II. Synthesis and antibacterial activity of fluorinated 1-alkyl-1,4-dihydro-4-oxocinnoline-3-carboxylic acids

Chemical modification of cinoxacin was studied with the aim of improving its antibacterial activity and spectrum. Alkylation of ethyl 6,7,8-trifluoro- and 6,7-difluoro-4-hydroxycinnoline-3-carboxylates (1 and 7) with alkyl iodide or dialkyl sulfate gave ethyl 1-alkyl-6,7,8-trifluoro- and 6,7-difluoro-1,4-dihydro-4-oxocinnoline-3-carboxylates (2 and 8), together with the isomeric anhydro-bases 3 and 9 of 2-alkyl-3-ethoxycarbonyl-6,7,8-trifluoro- and 6,7-difluoro-4-hydroxycinnolinium hydroxides, respectively. Acid-catalyzed hydrolysis of the 1-alkyl derivatives 2 and 8 gave the corresponding carboxylic acids 4 and 10. The same treatment of 3 and 9, accompanied with decarboxylation of the inner salts 5 and 11, afforded the anhydro-bases 6 and 12 of 2-alkyl-4-hydroxycinnolinium hydroxides, respectively. Displacement reactions of 4 and 10 with nucleophiles such as amine, alkoxide and thiolate gave 7-substituted 1-alkyl-6,8-difluoro- and 6-fluoro-1,4-dihydro-4-oxocinnoline-3-carboxylic acids (13 and 17-35). Antibacterial activities of these compounds were evaluated and compared with those of cinoxacin and norfloxacin. Some compounds showed a broader spectrum and more potent activity than cinoxacin, but were considerably inferior in activity to norfloxacin.     

Vitamin E and related ether-phenols: A low-temperature dielectric relaxation study

Within a classs of phenols comprising durenols and methylated chromenols, chromanols and coumaranols, hydrogen-abstraction rate constants, and therefore radical-scavenging and antioxidant effectiveness are closely paralleled by low-temperature relaxation rates, and are apparently influenced in similar proportions by the inductive and resonance effects of para-alkoxy groups. Relaxation rates of 2,3,5,6-tetrachlorophenol and 2,6-di-tertiary-butyl phenol with and without 4-methoxy substituents are also reported and discussed.     

Zwitterionic surfactants in ion binding and catalysis

Zwitterionic surfactants have unique properties for applications in separation methods and catalysis. Their properties and efficiencies depend on two main factors: surfactant structure and preferential interactions of zwitterionic surfactant interfaces with anions. Structural changes are related to hydrocarbon chain length, distance between charges, and type and order of functional groups in the polar head. Interactions of anions with zwitterionic micelles follow the Hofmeister series and change the surface charge. The interactions between surfactants and molecules/ions allow the rational control of separation by chromatography and micellar capillary electrophoresis; cloud point extraction; and stabilization and catalytic activity of biomolecules and nanoparticles.