Controlling Cr3+/Cr4+ concentration in single-phase host toward tailored super-broad near-infrared luminescence for multifunctional applications

Full control on the valence of the active ions in solids to improve properties is the central topic of chemistry and materials. Cr³⁺ and Cr⁴⁺ ions generally emit wavelength-different near-infrared (NIR) light. Here, we have developed a chromium valence-controllable single-phase phosphor, Mg₂GeO₄:Cr³⁺,Cr⁴⁺ to achieve super-broad NIR luminescence. High Li ⁺ content charge compensators can stabilize Cr³⁺, whereas high-temperature sintering tends to facilitate the formation of Cr⁴⁺. Through fine adjusting the synthesis conditions, pure Cr³⁺ or Cr⁴⁺ luminescence can be obtained with peak emission locating at 935 nm and 1190 nm, respectively. Super broad band dual emission spanning from 650 nm to 1600 nm is realized via fully controlling the concentration ratio of Cr³⁺ to Cr⁴⁺ in a single host. By measuring the transmission spectra of several foodstuff illuminated by our phosphors, non-destructive analysis in food safety areas can be realized. This study provides a new strategy for exploiting super broad band NIR luminescent materials.     

Blue-light-excitable broadband yellow-emitting CaGd2HfSc(AlO4)3:Ce3+ garnet phosphors for white light-emitting diode devices with improved color rendering index

The current commercial white light-emitting diodes (LEDs) are generally based on the combination of blue LED chips and Y₃Al₅O₁₂:Ce³⁺ yellow phosphors. However, because of the lack of red component, such white LED devices exhibit cool white-light emissions with low color rendering index (Ra < 75, R9 < 0). Therefore, it is urgent to discover new blue-light-excitable yellow-emitting phosphors with enhanced red emissions for fabricating high color-quality white LEDs. In the present work, we demonstrate a novel broadband yellow-emitting CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor for blue-light-excited white LEDs with improved color rendering index. The as-prepared CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor possesses a cubic structure with Ia$\overline{3}$d space group, and the unit cell parameters of the representative CaGd₂HfScAl₃O₁₂:2%Ce³⁺ phosphor are a = b = c = 12.450 Å, α = β = γ = 90°, and V = 1,929.59(4) ų. Impressively, we find that the CaGd₂HfScAl₃O₁₂:Ce³⁺ garnet phosphor shows an intense absorption band in the 300–500 nm wavelength range with a maximum at 452 nm owing to the 4f→5d transition of Ce³⁺ ions. On 452 nm excitation, the optimal CaGd₂HfScAl₃O₁₂:2%Ce³⁺ sample exhibits a broad asymmetric yellow emission band in the wavelength range of 470–750 nm with peak at 564 nm and full width at half maximum of 151 nm. The Commission Internationale de l’Eclairage chromaticity coordinates and internal quantum efficiency of the CaGd₂HfScAl₃O₁₂:2%Ce³⁺ sample are (0.4485, 0.5157) and 30.4%, respectively. Finally, a white LED device is fabricated by combing a 450 nm blue LED chip with commercial Y₃Al₅O₁₂:Ce³⁺ yellow-emitting phosphor, which generates white light with low color rendering index (CRI; Ra = 74.7, R9 = ?12.7) and high correlated color temperature (CCT = 6,554 K) under the 60 mA driving current. In sharp contrast, another white LED device, which is made by coating our as-prepared CaGd₂HfScAl₃O₁₂:2%Ce³⁺ yellow-emitting phosphors onto the surface of a 450 nm blue LED chip, produces white-light emission with high CRI value (Ra = 84.5, R9 = 26.3) and relatively low CCT of 5,649 K. This work reveals that the newly discovered broadband yellow-emitting CaGd₂HfScAl₃O₁₂:Ce³⁺ phosphors can serve as a potential color converter in high-color-quality phosphor-converted white LEDs.     

Finding an efficient far-red-emitting CaMg2La2W2O12:Mn4+ phosphor toward indoor plant cultivation LED lighting

The development of high-brightness far-red-emitting phosphors with emission wavelength within 650–750 nm is of great significance for indoor plant cultivation light-emitting diode (LED) lighting. Herein, we demonstrate a novel efficient far-red-emitting phosphors CaMg₂La₂W₂O₁₂:Mn⁴⁺ (abbreviated as CMLW:Mn⁴⁺) toward application in plant cultivation LEDs. Interestingly, the CMLW:Mn⁴⁺ phosphors show a broad excitation band in the 250–600 nm spectral range with two peaks at 352 and 479 nm, indicating they could be efficiently excited by near-ultraviolet and blue light. Under 352 nm excitation, the CMLW:Mn⁴⁺ phosphors exhibit an intense far-red emission band in the wavelength range of 650–800 nm peaking at 708 nm, corresponding to the ²E_g → ⁴A_2g transition of Mn⁴⁺ ions. Mn⁴⁺ doping concentration-dependent luminescence properties are studied in detail, and the concentration quenching mechanism is also investigated. Particularly, the internal quantum efficiency of CMLW:Mn⁴⁺ phosphors reaches as high as 44%, and their PL spectra match well with the absorption spectrum of phytochrome P_FR (P_FR stands for far-red-absorbing form of phytochrome). Furthermore, a prototype LED device is fabricated by coating the as-prepared CMLW:0.8%Mn⁴⁺ phosphors on a 460 nm blue LED chip, which produces bright far-red emissions upon 20–300 mA driving currents. This work reveals that the newly discovered far-red-emitting CMLW:Mn⁴⁺ phosphors hold great potential for application in indoor plant cultivation.     

Obtain full visible spectrum light-emitting diode illumination via bismuth-activated cyan phosphors

Developing highly efficient cyan-emitting fluorescent materials is essential to bridge the cyan gap in phosphor-converted white light-emitting diodes for full-spectrum white illumination. Here, a Bi-doped cyan phosphor has been reported to solve this gap. The phase purity, photoluminescence emission/excitation spectra, concentration quenching, lifetime decay curves, and temperature-dependent photoluminescence emission spectra were systematically investigated. SrLaGaO₄:Bi³⁺ exhibits a broad excitation band (250–400 nm), which matches with the emission of a commercial near-ultraviolet light-emitting diode chip. The cyan light peaked at 475 nm is observed, which is attributed to the ³P₁→¹S₀ transition of Bi³⁺. The thermal quenching experiment was performed, and the activation energy was calculated as 0.36 eV. Finally, full-spectrum white light-emitting diode devices were fabricated using SrLaGaO₄:Bi³⁺ phosphors, commercial blue BaMgAl₁₀O₁₇:Eu²⁺ phosphor, green (Ba, Sr)₂SiO₄:Eu²⁺ phosphor, and red CaAlSiN₃:Eu²⁺ phosphor, which displayed an International Commission on an illumination coordinate of (0.3732, 0.3850), a correlated color temperature of 4290 K, and a color rendering index of 93.2 at a drive current of 20 mA. This result indicates that SrLaGaO₄:Bi³⁺ plays an essential role in bridging the cyan gap, providing new inspiration for applying cyan-emitting phosphors in full-spectrum white lighting.     

A novel Cr3+-activated far-red titanate phosphor: synthesis,luminescence enhancement and application prospect

Plant factory, a new agricultural planting technology, has emerged and rapidly grown in recent years, with phosphor conversion light emitting diodes (pc-LEDs) considered as the first choice of source light for the plant factory. In this study, a new type of Cr³⁺-activated Li₂MgTi₃O₈ phosphor (LMT: Cr³⁺) was synthesized by high temperature solid state method. X-Ray diffraction patterns showed that there was no detectable impurity in these samples. The photoluminescence spectra revealed that this phosphor can emit far-red light with the peak at 740 nm excited by ultraviolet and blue light, overlapped well with the P_FR. After introducing Zn²⁺ ions (LMT: Cr³⁺, Zn²⁺), the luminescence intensity increases by 46% mainly due to the increase of lattice distortion, and internal quantum yield was improved from 25.4% to 41.3% under 365 nm excitation. Finally, the pc-LED devices, consisting of 470 nm chip coated with the optimal phosphor, exhibited good luminescence and overlapping with P_FR. These results indicate that the LMT: Cr³⁺, Zn²⁺ phosphor has the potential application in modern agriculture.     

Using an excellent near-UV-excited cyan-emitting phosphor for enhancing the color rendering index of warm-white LEDs by filling the cyan gap

White light-emitting diodes (LEDs) with high color rendering index (CRI) and low correlated color temperature (CCT) are desirable for next-generation solid-state lighting. In this work, we demonstrated an efficient near-UV-excited cyan-emitting phosphor based on Ce³⁺-doped Ca₂LuHf₂Al₃O₁₂ (CLHAO) garnet, which could be used to cover the cyan gap for fabricating high-CRI warm-white LEDs. We found that the CLHAO:Ce³⁺ samples exhibited a broad excitation band in the 300–450 nm wavelength range peaking at 400 nm, and upon 400 nm excitation they showed broad cyan emission bands in the 420–600 nm spectral region with peak positions ranging from 477 to 493 nm. The optimal CLHAO:0.02Ce³⁺ sample had CIE color coordinates of (0.160, 0.255), and its internal and external quantum efficiencies were measured to be 84.3% and 60.8%, respectively. Impressively, the luminescence intensity of CLHAO:0.02Ce³⁺ sample at 423 K still remained at 62% of the initial value at 303 K, and the chromaticity shift was calculated to be as low as 1.7 × 10^?2, revealing its high thermal stability and color stability at a higher temperature. Finally, a warm-white LED device (CCT = 3,194 K) was fabricated by combining CLHAO:0.02Ce³⁺ cyan phosphors with commercial blue/green/red tricolor phosphors, showing bright white-light emission with a high CRI of 89.4, which was superior to that of another warm-white LED device (CRI = 83.2) fabricated without CLHAO:0.02Ce³⁺ cyan phosphors. These outstanding luminescence properties of CLHAO:Ce³⁺ cyan phosphors illustrated that they offer a new feasible approach for the production of high-CRI warm-white LEDs toward high-color-quality solid-state lighting.     

Photoluminescent properties of white-light-emitting Li6Y(BO3)3:Dy3+ phosphor

In this study, lithium yttrium borate (LYBO) phosphor was doped with various concentrations of trivalent dysprosium ions. To produce these phosphors, the raw materials were sintered. The phase conformation, crystallinity, grain size, and overall morphology of the synthesized phosphors were studied with X-ray diffraction and scanning electron microscopy. The optimized LYBO phosphor, i.e., the LYBO phosphor that exhibited the highest X-ray- and ultraviolet (UV)-induced photoluminescent intensities, had a Dy³⁺ concentration of 4 mol%. Photoluminescence analysis showed that this phosphor could be easily excited with near-UV light (300–400 nm). The dominant photoluminescence bands were found in the blue (480 nm) and yellow (577 nm) regions of the visible spectrum. The light yield of the X-ray-induced luminescence of the optimized Li₆Y(BO₃)₃:Dy³⁺ was found to be 66% of that of the commercially available X-ray imaging material, Gd₂O₂S:Tb³⁺ (GOS). The chromaticity coordinates of the Li₆Y(BO₃)₃:Dy³⁺ phosphor were x = 0.34 and y = 0.32, which agree well with achromatic white (x = 0.33, y = 0.33). The results of this study show that the synthesized Li₆Y(BO₃)₃:Dy³⁺ phosphor could be used as X-ray imaging material.     

Li5Zn8Ga5Ge9O36: Cr3+, Ti4+: A Long Persistent Phosphor Excited in a Wide Spectral Region from UV to Red Light for Reproducible Imaging through Biological Tissue

Near‐infrared (NIR) long‐persistent phosphors (LPPs) have emerged as a potential solution for bio‐imaging applications over the past few years. However, there are enormous challenges regarding their in situ application based on their dependence on short‐wavelength excitation. In this paper, we report a multi‐spectral excited NIR LPP, Li₅Zn₈Ga₅Ge₉O₃₆: 1.5 % Cr³⁺, 0.5 % Ti⁴⁺, which overcomes the limitations of functional processes in biological tissues and other complex systems. This LPP exhibits a high luminescent intensity and a long emission duration in the NIR region (700–800 nm). The applicability of this phosphor to tissue imaging is demonstrated experimentally. Its persistent luminescence (PersL) can easily penetrate approximately 2 mm of pork flesh. More importantly, this phosphor can be re‐charged in situ using a red LED or laser diode array to provide renewed NIR PersL for biological tissues, which is beneficial for long‐term biological tissue imaging applications with high signal‐to‐noise ratios. Systematic investigations of the nature of energy traps and PersL mechanisms are also reported in this paper.     

Tailoring of strong orange-red-emitting materials for luminescence lifetime thermometry,anti-counterfeiting,and solid-state lighting applications

Strong orange-red-emitting Ba₂LaTaO₆:Eu³⁺ phosphors were designed and applied in various optical applications of luminescence lifetime thermometer, anti-counterfeiting film, and solid-state lighting applications. The crystal structure, elemental composition, asymmetry ratio, and other luminescent behaviors were investigated in detail. Especially, the optimal Ba₂LaTaO₆:0.1Eu³⁺ phosphor presented remarkable quantum yield (45.29%) and thermal stability (71.52% at 423 K). Based on the temperature-dependent luminescence decay curves, the maximum relative sensing sensitivity was 0.185 × 10^?2 K^?1 at 513 K. In addition, a novel anti-counterfeiting technique was introduced. The fabricated polydimethylsiloxane films exhibited three different colors under the irradiations of room light, 254 nm light, and 365 nm light, respectively. Eventually, the packaged light-emitting diode displayed the pure orange-red emission. Briefly, a series of the Eu³⁺-activated Ba₂LaTaO₆ phosphors with excellent luminescent properties were characterized and further applied in several optical fields for the first time.     

Photoluminescence properties and application of yellow Ca0.65Si10Al2O0.7N15.3:xEu2+ phosphors for white LEDs

A series of yellow-emitting oxynitride Ca_0.65Si₁₀Al₂O_0.7N_15.3:xEu²⁺ phosphors with α-sialon structure were synthesized. The phase composition and crystal structure were identified by X-ray diffraction and the Rietveld refinement. The excitation and emission spectra, reflectance spectra and thermal stability were investigated in detail, respectively. Results show that Ca_0.65Si₁₀Al₂O_0.7N_15.3:0.12Eu²⁺ phosphors can be efficiently excited by UV-Vis light in the broad range of 290–450 nm and exhibit broad emission spectra peaking at 550–575 nm. The concentration quenching mechanism are discussed in detail and determined to be the dipole-dipole interaction. When the temperature increased to 150 °C, the emission intensity of Ca_0.65Si₁₀Al₂O_0.7N_15.3:0.12Eu²⁺ phosphor is 88.46% of the initial value at room temperature. White LED was fabricated with N-UV LED chip combined with blue Ca₃Si₂O₄N₂:Ce³⁺ and yellow Ca_0.65Si₁₀Al₂O_0.7N_15.3:Eu²⁺ phosphors. The color rendering index and correlated color temperature of this white LED were measured to 78.94 and 6728.12 K, respectively. All above results demonstrate that the as-prepared Ca_0.65Si₁₀Al₂O_0.7N_15.3:xEu²⁺ may serve as a potential yellow phosphor for N-UV w-LEDs.     

Octahedron-dependent near-infrared luminescence in Cr3+-activated phosphors

Searching for broadband near-infrared (NIR) materials with high efficiency and excellent thermal luminescence stability is of great significance because of their widespread spectroscopic applications. Different element substitution can modulate the structure and crystal field of host lattice so as to regulate the luminescent properties. Herein, we report the octahedron-dependent NIR luminescence in Cr³⁺-doped KMP₂O₇ (M = Ga, Sc, In, and Lu) phosphors and investigate the effect of octahedral environment on luminescent properties, aiming to provide guidance for host material selection. The decreased crystal field strength leads to the apparent spectral red shift from 815 to 900 nm for the samples of M = Ga to Lu. The small Stokes shift as well as weak electron–phonon coupling effect decreases the non-radiative transition probability and thus gives rise to the highest emission intensity and excellent thermal stability of Cr³⁺-doped KGaP₂O₇. The optimal sample, KGa_0.89P₂O₇:0.11Cr³⁺, possesses an internal/external quantum efficiency of 55.8%/36.6%, and its integrated emission intensity at 423 K can maintain 68% of that at room temperature. Finally, we investigate the potential applications in non-destructive examination field by manufacturing a NIR phosphor-conversion light-emitting diode device.     

Ultra‐Narrow‐Band Blue‐Emitting Oxoberyllates AELi2[Be4O6]:Eu2+ (AE=Sr,Ba) Paving the Way to Efficient RGB pc‐LEDs

Highly efficient phosphor‐converted light‐emitting diodes (pc‐LEDs) are popular in lighting and high‐tech electronics applications. The main goals of present LED research are increasing light quality, preserving color point stability and reducing energy consumption. For those purposes excellent phosphors in all spectral regions are required. Here, we report on ultra‐narrow band blue emitting oxoberyllates AELi₂[Be₄O₆]:Eu²⁺ (AE=Sr,Ba) exhibiting a rigid covalent network isotypic to the nitridoalumosilicate BaLi₂[(Al₂Si₂)N₆]:Eu²⁺. The oxoberyllates’ extremely small Stokes shift and unprecedented ultra‐narrow band blue emission with fwhm ≈25 nm (≈1200 cm^?1) at λ_em=454–456 nm result from its rigid, highly condensed tetrahedra network. AELi₂[Be₄O₆]:Eu²⁺ allows for using short‐wavelength blue LEDs (λ_em<440 nm) for efficient excitation of the ultra‐narrow band blue phosphor, for application in violet pumped white RGB phosphor LEDs with improved color point stability, excellent color rendering, and high energy efficiency.     

Waterproof Alkyl Phosphate Coated Fluoride Phosphors for Optoelectronic Materials

A facile approach for coating red fluoride phosphors with a moisture‐resistant alkyl phosphate layer with a thickness of 50–100 nm is reported. K₂SiF₆:Mn⁴⁺ particles were prepared by co‐precipitation and then coated by esterification of P₂O₅ with alcohols (methanol, ethanol, and isopropanol). This route was adopted to encapsulate the prepared phosphors using transition‐metal ions as cross‐linkers between the alkyl phosphate moieties. The coated phosphor particles exhibited a high water tolerance and retained approximately 87 % of their initial external quantum efficiency after aging under high‐humidity (85 %) and high‐temperature (85 °C) conditions for one month. Warm white‐light‐emitting diodes that consisted of blue InGaN chips, the prepared K₂SiF₆:Mn⁴⁺ phosphors, and either yellow Y₃Al₅O₁₂:Ce³⁺ phosphors or green β‐SiAlON: Eu²⁺ phosphors showed excellent color rendition.     

Learning from a Mineral Structure toward an Ultra‐Narrow‐Band Blue‐Emitting Silicate Phosphor RbNa3(Li3SiO4)4:Eu2+

Learning from natural mineral structures is an efficient way to develop potential host lattices for applications in phosphor converted (pc)LEDs. A narrow‐band blue‐emitting silicate phosphor, RbNa₃(Li₃SiO₄)₄:Eu²⁺ (RNLSO:Eu²⁺), was derived from the UCr₄C₄‐type mineral model. The broad excitation spectrum (320–440 nm) indicates this phosphor can be well matched with the near ultraviolet (n‐UV) LED chip. Owing to the UCr₄C₄‐type highly condensed and rigid framework, RNLSO:Eu²⁺ exhibits an extremely small Stokes shift and an unprecedented ultra‐narrow (full‐width at half‐maximum, FWHM=22.4 nm) blue emission band (λ_em=471 nm) as well as excellent thermal stability (96 %@150 °C of the initial integrated intensity at 25 °C). The color gamut of the as‐fabricated (pc)LEDs is 75 % NTSC for the application in liquid crystal displays from the prototype design of an n‐UV LED chip and the narrow‐band RNLSO:Eu²⁺ (blue), β‐SiAlON:Eu²⁺ (green), and K₂SiF₆:Mn⁴⁺ (red) components as RGB emitters.     

Er3+-Tm3+-Yb3+ tri-doped CaMoO4 upconverting phosphors in optical devices applications

The structural and optical properties of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphors prepared by chemical route have been explored. The crystalline structures of the prepared phosphors have been investigated with the help of X-ray diffraction analysis. The presence of different vibrational modes and absorption bands arising due to the transitions from the ground state to different excited states of rare earth ions have been identified using the Raman and UV-VIS-NIR absorption spectra of the developed phosphor, respectively. The concentration quenching effect on the luminescence property of the prepared materials has been explained in detail. The upconversion luminescence property of the Er³⁺-Tm³⁺-Yb³⁺codoped CaMoO₄ phosphor annealed at different temperatures under 980 nm and 808 nm excitations have been reported. The energy transfer Er³⁺ → Tm³⁺, Yb³⁺ → Er³⁺ and Tm³⁺ has been found to be responsible for efficient UC emission. The dipole-dipole interaction is observed to be responsible for the concentration quenching of the luminescence intensity. The effect of annealing temperature on the upconversion luminescence property has been explained in detail. The results suggest that the developed tri-doped phosphor may be suitable in making the efficient NIR to visible upconverter and lighting based optical devices.     

Broadband Cr3+, Sn4+‐Doped Oxide Nanophosphors for Infrared Mini Light‐Emitting Diodes

Light‐emitting diodes break barriers of size and performance for displays. With devices becoming smaller, the materials also need to get smaller. Chromium(III)‐doped oxide phosphors, which emit near‐infrared (NIR) light, have recently been used in small electronic devices. In this work, mesoporous silica nanoparticles were used as nanocarriers. The nanophosphor ZnGa₂O₄:Cr³⁺,Sn⁴⁺ formed in the mesopore after sintering. Good dispersity and morphology were performed with average diameters of 71±7 nm. It emitted light at 600–850 nm; the intensity was optimized by tuning the doping ratio of Cr³⁺ and Sn⁴⁺. Meanwhile, the light conversion efficiency increased from 7.8 % to 37 % and the molar concentration increased from 0.125 m to 0.5 m . The higher radiant flux of 3.3 mW was obtained by operating an input current of 45 mA. However, the NIR nanophosphor showed good performance on mini light‐emitting diode chips.     

Synthesis and optical studies of novel Eu2+ and Ce3+ doped BaMg8Al18Si18O72 phosphors

Novel Eu²⁺ and Ce³⁺ activated BaMg₈Al₁₈Si₁₈O₇₂ phosphors was prepared by combustion method and their PL characteristics were investigated. The result shows that all samples can be excited efficiently by near UV excitation under 334 nm and 316 nm. The emission was observed for BaMg₈Al₁₈Si₁₈O₇₂:Eu²⁺ phosphor at 437 nm corresponding to d → f transition, under 334 nm broad-band excitation, whereas BaMg₈Al₁₈Si₁₈O₇₂:Ce³⁺ phosphor shows emission band at 376 nm under 316 nm excitation. Phase purity of the phosphor was checked with the help of XRD pattern. SEM analysis shows the external morphology of the combustion synthesized phosphor.     

An emerging NIR super-long persistent phosphor and its applications

Materials with the ability to persistently emit intense near-infrared (NIR) light after ceasing excitation are very useful in many fields. The persistent time is a vital parameter for successful applications. In this study, we developed an emerging NIR super-long persistent luminescent (PersL) material, Cr³⁺-activated magnetoplumbite oxide La(Zn/Mg)(Ga,Al)₁₁O₁₉:Cr³⁺, by doping Yb³⁺ as a new efficient electron trap and incorporating Al³⁺ to engineer the energy band. We show that fine control of the trap depth and density is the key underpinning for PersL enhancement. The title material emits intense PersL in the spectral range of 600–950 nm with a PersL time of more than 1,000 h. Furthermore, after undergoing such long-term decay, the NIR emission can be revived by photo-/thermo-stimulation. We demonstrate its potential uses in bioimaging, multilevel anti-counterfeiting, tracing, and positioning. This study provides insight into how energy band engineering manipulates electronic structures to achieve high-performance PersL. The new NIR persistent phosphor may be soon utilized in related applications.     

Luminescent properties of Sr<Subscript>3</Subscript>Al<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu,Pr prepared by sol–gel method

A new red-emitting long afterglow Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor was synthesized by sol–gel methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu(NO₃)₃ and Pr(NO₃)₃ as raw materials. The crystalline structure of the phosphor powders were characterized by X-ray diffraction. Luminescent properties of the phosphor powders were analyzed by the fluorescence spectrophotometer. Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor powders with single Sr₃Al₂O₆ phase were prepared at 1200 °C for 2 h in the reducing atmosphere. Pr³⁺ doped made the light intensity and the light-lasting time of Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphors improved. The emission peaks of the Sr₃Al₂O₆: Eu²⁺, Pr³⁺ phosphor powders lay at 612 nm with the excitation of 472 nm and the longest afterglow time could last for about 15 min at Pr³⁺ content of 0.06.     

High sensitivity and multicolor tunable optical thermometry in Bi3+/Eu3+ co-doped Ca2Sb2O7 phosphors

Currently, with increasing demand for non-contact fluorescence intensity ratio-based optical thermometry, a novel phosphor with high-efficiency, dual-emitting centers, and differentiable temperature sensitivity is more and more urgent to develop. In this work, an efficient dual-emitting center optical thermometry with high sensitivity and multicolor tunable in Ca₂Sb₂O₇:Bi³⁺, Eu³⁺ phosphor is firstly designed and successfully prepared. Under 330 nm excitation, the fabricated phosphor presents the featured and distinguishable emissions of Bi³⁺ and Eu³⁺ ions. The high efficiency energy transfer from Bi³⁺ to Eu³⁺ ions is proved and its corresponding mechanism belongs to dipole-dipole interaction. By modulating the ratio of Bi³⁺/Eu³⁺, the multicolor changes from blue to pink are realized. Based on the discriminative thermal quenching behavior between Bi³⁺ and Eu³⁺, the fluorescence intensity ratio of Eu³⁺ to Bi³⁺ in Ca₂Sb₂O₇ samples illustrates excellent optical thermometry performance from 298 to 523 K. The maximum absolute sensitivity (S_a) and relative sensitivity (S_r) reach as high as 0.2773 K^?1 at 523 K and 2.37% K^?1 at 448 K, respectively. Notably, the discriminated surrounding temperature can be directly confirmed by observing the emitting color from purple to orange-red with the temperature increase from 298 to 523 K. Furthermore, the as-prepared phosphor materials also demonstrate outstanding repeatability and excellent reversibility. These results exhibit that the designed Ca₂Sb₂O₇:Bi³⁺, Eu³⁺ phosphors have great promising applications in the field of non-contact optical temperature thermometry and thermochromic.