直接模板法合成三维立方介孔氧化硅HOM-5

0引言自1992年Mobil公司制备出M41S系列[1,2](包括MCM-41、MCM-48和MCM-50)介孔氧化硅以来,介孔材料以其有序度高、比表面积大、孔径可调等优异特性,引起了材料科学界的关注。不同类型的系列介孔材料,如SBA[3]、HMS[4]、MSU[5]等相继见诸报道。其中,空间群为Ia3d的MCM-48型三维立方介孔氧化硅具有完全相同,但互不相连的两套孔道[6],贯通性好,对称性高,对物料的传输优于二维孔道结构,在吸附、分离及催化等领域应用前景广泛。但这种结构对应的是溶致液晶相图的V1区域,对于多数表面活性剂来说,此相区较小,因此这种结构较难合成[7]。…     

单分散核-壳结构介孔二氧化硅微球的合成

在酸性条件下,采用非离子表面活性剂嵌段共聚物为模板剂,季铵盐阳离子表面活性剂为共导向剂,在预先合成的尺寸均一的单分散实心氧化硅微球表面包裹了有序介孔氧化硅层,进一步通过高温水热处理,获得了具有良好分散性和均匀尺寸的介孔壳层(孔径7 nm)氧化硅微球(～500 nm).氧化硅微球外部包裹的介孔壳层具有较大的比表面积(18...     

利用嵌段共聚物及无机盐合成高质量的立方相、大孔径介孔氧化硅球

使用非离子型嵌段高分子表面活性剂为模板剂，在无机盐的作用下，合成了直 径在2～4 mm、高度有序、立方相的介孔氧化硅SBA-16球。利用无机盐来调变无机 /有机物种之间的作用力和自组装能力，不仅在介观尺寸上提高了所合成介孔材料 的有序程度，而且在宏观上控制了介孔材料的形貌。经焙烧后的SBA-16球材料比表 面积为750 m~2/g，孔容为0.52 cm~3/g，孔径为7.8 nm。具有大孔径的SBA-16球材 料可以更方便地应用于大分子吸附和分离等领域。     

生物蛋清蛋白模板合成海绵状大孔无机氧化物

多孔无机材料因可在微加工,催化,生物分离,电子器件的矿化和色谱载体等方面的广泛应用而引起人们极大的兴趣^[1-9],模板技术是制备孔材料最有效的工具之一,以表面活性剂和嵌段共聚物作为模板剂可以合成出结构多样,孔径均一,有序度高的介孔分子筛（2－50nm),大孔无机材料（＞50nm)通常采用以高分子微球和微乳液作模板的方法来合成（^[10],最近,我们利用浓度极高的;盐溶液和聚苯乙烯球作为模板,合成了3D海绵状大孔和介孔复合的氧化硅薄片^[11][,利用电化学等方法合成了具有特殊光阻性质的大孔氧化硅,氧化钛,金属以及合金材料等^[12],利用电化学等方法合成了具有特殊光阻性质的大孔氧化硅,氧化钛,金属以及合成材料等^[12],也有人利用相分离的方法制备无序大孔材料,但该方法一般较复杂,成本也比较昂贵,自然界中的大孔材料如海藻,珊瑚（氧化硅）是通过生物蛋白质为模板在基胞核内形成的,但是生物蛋白的模板作用和形成机理目前还不十分清楚。     

有机小分子模板法合成二氧化钛中孔材料

1992年美国Mobil公司[1,2]首次以表面活性剂为模板,合成出具有特定孔道结构和规则孔径的中孔分子筛.近7年来以离子或中性表面活性剂为模板制备硅中孔或过渡金属掺杂的中孔材料的报道层出不穷[3,4].由于这些材料的孔径较大,分布均匀,以及过渡金属的特殊催化性能使其在分离或催化中得到应用.1998年Wei[5]等首次以葡萄糖、麦芽糖和酒石酸衍生物等非表面活性剂有机分子为模板,制备出高比表面积,孔径可调,窄孔径分布的中孔二氧化硅分子筛.由于有机小分子种类繁多,后处理方便,且有的对环境友好,这为中孔材料的制备提供了一种新方法.迄今为止,以过…     

有机/无机复合介孔膜的合成及其生物酶吸附行为研究

以正硅酸四乙酯(TEOS)为硅源、三嵌段共聚物(F127)为表面活性剂,聚碳酸酯膜为硬模板,并采用抽滤法在聚碳酸酯膜内的亚微米级孔道中组装介孔氧化硅从而制备出有机(聚碳酸酯)/无机(介孔氧化硅)复合介孔膜.通过扫描电镜、能量分散光谱以及透射电镜等实验表征了该有机/无机复合介孔膜的组成、结构及形貌.研究结果表明:通过该方法可以在聚碳酸酯膜内孔道中形成长度为9μm、直径为200nm的一维氧化硅棒状材料,且该棒状材料具有无序蠕虫状和有序体心立方的混合介孔结构,有序体心立方介孔的平均孔径约为8.5nm.另外,初步考察了该复合介孔膜对生物酶的物理吸附行为,结果表明其对肌红蛋白酶的单位吸附负载量为5.85mg/g.     

水玻璃为原料在开放体系中快速合成介孔材料MCM-41

自从 M41 S系列硅基介孔分子筛被人工合成以来[1,2 ] ,有关分子筛的合成、性能、形成机理、结构和应用等方面的研究报道不断出现[3～ 5] .目前 ,由有机 -无机离子经分子水平的自组装结合而产生介孔材料的合成机理主要归结于在合成过程中表面活性剂的模板效应 ,如液晶模板机理[1,2 ] 、棒状自组装模型[6 ] 、电荷匹配机理[7] 、层状折皱模型[8] 和使用非离子表面活性剂合成介孔材料等效应[9] .本文以水玻璃作为硅源 ,以十六烷基三甲基溴化铵 (CTAB)阳离子表面活性剂为模板剂 ,在温和条件下 ,采用开放体系合成出具有 MCM-4 1结构特点的介…     

混合表面活性剂模板法合成立方相介孔含钛氧化硅

自1992年Ｍｏｂｉｌ公司的Ｍ41Ｓ系列介孔氧化硅分子筛问世以来[1,2],借助表面活性剂液晶模板方法合成各种孔结构与不同大小孔径的硅基分子筛材料引起了人们的极大兴趣,目前多数工作仍然集中于六方相的介孔分子筛.具有双连续的三维交织立方排列孔道结构的ＭＣＭ48由于其孔道不易堵塞和良好的骨架结构稳定性[3,4],在催化、吸附和与其为载体的制备等方面具有独特的应用价值.但由于液晶模板形成立方相区的范围非常狭窄,相应的分子堆积比对模板剂分子几何结构要求较苛刻,采用单一表面活性剂为模板剂合成时,条件难以掌握,制备ＭＣＭ48十分困难.Ｈ…     

微乳液法合成沸石/介孔二氧化硅复合微球(英文)

利用简单微乳液自组装体系,制备了介孔二氧化硅与Y型或Ti-MWW沸石晶体复合形成的沸石/介孔二氧化硅微球(ZMMS).硅源正硅酸四丁酯与阳离子型季铵盐表面活性剂形成稳定的O/W微乳液形成大颗粒,沸石颗粒由于疏水作用而进入油相,同时,季铵盐表面活性剂和正硅酸四丁酯组装形成介孔材料.优化合成条件可以有效控制复合微球的沸石/介孔二氧化硅质量比(0～2.3)和直径(186～965μm).两种沸石/介孔二氧化硅复合微球材料的介孔孔径分别为3.98 nm(Y型沸石)和3.75 nm(Ti-MWW型沸石).Ti-MWW沸石/介孔二氧化硅复合微球在液相催化环氧化反应中表现出良好的机械强度,并且能够达到与Ti-MWW沸石原粉相当的催化活性.     

可用于色谱固定相的介孔氧化硅球材料的合成

采用非离子型嵌段高分子表面活性剂EO₂₀PO₃₀EO₂₀ (P65)为结构导向剂, 正硅酸乙酯为硅源, 在酸性介质中, 静置法制备了微米级介孔氧化硅球. 通过改变合成温度、反应时间或者无机盐KCl的加入量, 可以调节介孔氧化硅球的直径(9.0～17.6 μm); 加入1,3,5-三甲苯(TMB)或者调节水热温度, 可以调节介孔氧化硅球的孔径(2.3～4.8 nm). 采用X射线衍射(XRD)、N₂吸附-脱附、扫描电镜(SEM)、激光散射粒度分布和对溶菌酶的吸附等方法, 对介孔氧化硅球的结构、孔性质、形貌、吸附性质等进行了表征. 实验发现, 孔径较小的介孔氧化硅球(≤4.3 nm)对溶菌酶的吸附不明显(≤42 mg/g), 而孔径(4.8 nm)大于溶菌酶直径的材料对溶菌酶有较大的吸附量(192 mg/g), 说明孔径均匀可调的介孔氧化硅球材料可以很好地用作体积排阻色谱柱的固定相.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.