反应原料组成对单分散苯乙烯微球粒径及其分布的影响

采用分散聚合工艺制备微米级单分散聚苯乙烯微球，并对分散聚合反应的内部影响因素(分散稳定剂、助稳定剂、单体、引发剂)进行了研究．结果表明，随着分散稳定剂和助稳定剂用量的增加，聚苯乙烯微球的粒径减小；随着单体和引发剂用量的增加，聚苯乙烯微球的粒径增大．分散稳定剂和单体用量是影响聚苯乙烯微球粒径分布的两个主要内部因素．     

分散聚合法制备单分散交联聚苯乙烯微球

以苯乙烯为单体、二乙烯基苯为交联剂,通过优化反应条件,制备了平均粒径为3.28～9.04 μm的单分散聚苯乙烯微球和平均粒径为6.60 μm的单分散交联聚苯乙烯微球.探讨了单体浓度、引发剂含量、分散稳定剂用量对微球粒径和分散性的影响.热稳定性分析表明:交联聚苯乙烯微球耐热性明显优于线性聚苯乙烯.     

单分散PS/PAA聚合物微球的研制

以苯乙烯为单体,采用分散聚合法制备了单分散性的聚苯乙烯(PS)微球,然后以PS微球作为种子、丙烯酸(AA)进行无皂种子乳液聚合制备了PS／PAA微球。考察了单体、引发剂、分散剂用量,反应介质极性和交链剂等因素对微球粒径大小及其分布的影响,探讨了分散聚合的反应机理。结果表明,通过改变反应工艺条件,能够制备粒径为1．0～3．0μm、单分散性很好的PS微球;通过无皂种子乳液聚合得到的核壳结构的PS／PAA微球粒径为2．50μm,多分散系数(PI)为0．0325,酸值为10．27mgNaOH／g,其表面带有羧基的特性能进一步扩大应用范围。     

分散聚合法制备单分散聚苯乙烯微球

以苯乙烯为单体,偶氮二异丁腈为引发剂,聚乙烯吡咯烷酮为分散稳定剂,在乙醇/水的极性反应体系中,使用分散聚合法制备了聚苯乙烯(PS)微球。研究了制备工艺对微球分子量等远程结构参数的影响。研究结果表明:在适合微球形成的单体用量、引发剂和分散稳定剂的浓度、反应温度、时间和乙醇/水的比例等参数下,克服了以往存在的粒径不均匀、分子量较低、微球表面圆整光洁度较低和产率偏低等主要问题,制备了粒径在1.5~3μm之间、粒径分布1.05~1.08、分子量80×104左右、最高得率达97%、球体表面光洁、球形对称均匀且相互不粘连的单分散PS微球。     

功能高分子微球研究分散聚合法合成μ级聚苯乙烯微球

微米级聚苯乙烯微球广泛用于临床分析、生物医学、胶体研究等领城,亦可作为电子显微镜、光散射、沉降法等测定微小物体绝对长度的基准物、色谱柱填料等。用分散聚合法可以制得微米级单分散聚苯乙烯微球。本文通过对分散聚合条件和配方的研究,以水和醇为分散介质,分子量4000的聚乙二醇为稳定剂,过氧化苯甲酰为引发剂,合成了粒径为3至4μm的单分散聚苯乙烯微球。在分散聚合体系中,随着有机溶剂、单体、引发剂等用量的增加,胶乳粒径增大,粒径分布变宽。随着稳定剂、表面张力调节剂等用量的增加,胶乳粒径减小,粒径分布变窄。有机溶剂种类改变以及聚合反应温度变化,胶乳粒径也发生变化。     

室温沉淀聚合制备单分散聚苯乙烯微球

采用沉淀聚合的方法以乙醇/水为混合溶剂、K_2S_2O_8/NaHSO_3为引发剂,室温下引发苯乙烯聚合制备了单分散的聚苯乙烯(PS)微球.研究了反应时间、引发剂用量、反应溶剂中乙醇与水的比例、搅拌速度对聚苯乙烯微球的收率及形貌、单体转化率的影响.结果表明,聚苯乙烯微球的单体转化率、微球的收率和粒径随着反应时间的延长而增加,反应12 h后趋于稳定;当增加引发剂的用量,聚苯乙烯微球的单体转化率、微球的收率和粒径都有所增加,K_2S_2O_8与Na HSO_3用量分别在≤2.0%和1.3%时,能够得到单分散的聚苯乙烯微球;随着反应介质中水含量的增加,聚苯乙烯微球的单体转化率、微球的收率先增加后降低,单分散性变差,水含量在≤40%能够得到单分散的微球;搅拌速度从600 r/min增加到1200 r/min时,微球粒径、收率与单体转化率几乎没有变化.并初步研究了聚苯乙烯微球的形成机理.     

聚苯乙烯单分散微球粒径可控性探讨

在系统研究分散聚合反应中的原料组成(分散稳定剂、单体、引发剂)和反应条件(反应介质极性、反应体系温度、搅拌速度)对所制备的聚合物微球的粒径大小及粒径分布和聚合反应速率影响的基础上,根据各因素的影响效应,优化设计分散聚合的反应条件,成功地制备出1μm~10μm粒径范围内不同粒径级别的微米级单分散聚合物微球,实现了不同粒径大小及粒径分布的微米级单分散聚合物微球制备的控制设计。     

单分散、大粒径聚苯乙烯微球的制备

以聚乙烯基吡咯烷酮为分散剂、偶氮二异丁腈为引发剂、醇／水混合物为分散介质进行了苯乙烯的分散聚合，讨论了初始单体浓度、分散剂用量、引发剂浓度、分散介质组成和反应温度等反应条件对所得聚合物颗粒直径和直径分布的影响．通过大量的试验，筛选出了较为理想的分散聚合的条件及配方，制备出了粒径为４８μｍ的单分散聚苯乙烯微球．然后，以分散聚合所制得的聚合物颗粒为种子，用动力学溶胀法制成了粒径增大近四倍的单分散、大粒径聚苯乙烯微球，并讨论了滴水速度和补加分散剂对溶胀的影响     

种子溶胀法制备单分散高交联聚苯乙烯微球

以分散聚合法制得平均粒径为1.80μm的聚苯乙烯微球为种子,与溶胀剂和单体、交联剂的混合物经二步溶胀聚合法,制备了单分散高交联聚苯乙烯微球。讨论了单体浓度和醇水比对种球的影响,以及溶胀剂的种类、溶胀剂浓度、交联剂浓度、溶胀温度和搅拌速度等因素对交联聚苯乙烯微球粒径及分散系数的影响。用扫描电子显微镜、离心式粒度分析仪及DSC分析测试技术对微球的外观形貌、粒径大小及分布和玻璃化转变温度分别进行了表征。结果表明,当溶胀剂质量分数为25%、交联剂质量分数为23%、溶胀温度30℃、搅拌速度为150r/min时,可制得平均粒径为6.20μm且单分散性较好的高交联聚苯乙烯微球。     

交联剂加入方式对聚苯乙烯微球形貌和分散性能的影响

以醇水混合液为分散介质,偶氮二异丁腈为引发剂,聚乙烯吡咯烷酮为稳定剂,二乙烯基苯为交联剂,采用分散聚合法一步制备了粒径约为1μm的单分散交联聚苯乙烯微球;采用扫描电镜和激光粒度仪等分析微球表面形貌及粒径分布,研究了滴加交联剂开始时间、交联剂浓度、引发剂浓度等对微球形貌和分散性能的影响.结果表明,在实验进行4h时加入交联剂,且交联剂滴加持续时间为2h的条件下,可制得平均粒径为1μm左右的交联聚苯乙烯微球,其具有较好的单分散性和球形度,且表面光滑.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。     

Stages of thermal decomposition of sodium oxo-salts of sulphur

Thermal behaviour of sodium oxo-salts of sulphur: Na₂SO₄, Na₂S₂O₇, Na₂S₂O₆, Na₂SO₃, Na₂S₂O₅, Na₂S₂O₄, Na₂S₂O₃, Na₂S₃O₆ and of sulphides Na₂S and Na₂S₂ was studied on heating up to 1000°C. The experiments were performed with anhydrous compounds obtained from commercial products by recrystallisation and dehydration. The stage mechanisms of decomposition of anionic sub-lattices of the salts have been proposed basing on the Górski’s morphological classification of simple species. The thermal stability and the stage decomposition mechanisms were correlated with the structure and the potential chemical properties of the salt anions. The thermal decomposition processes were studied by means of thermal analysis, and the decomposition products were identified by means of X-ray phase analysis.