A new method for the direct precipitation of aluminium in the presence of iron

It is shown that aluminium can be precipitated as benzoate from solutions containing up to 1 gram of iron in the presence of thioglycollic acid, which reduces the iron and forms a soluble complex with ferrous iron. Very large amounts of such salts as ammonium chloride, sulphate and perchlorate, and sodium chloride do not interfere, nor do other divalent metals. Molybdates and tungstates are without effect, but chromium, vanadium and titanium interfere. This limits the direct application of the method in metallurgical analysis, but in many cases this speedy and complete separation will have many uses.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups : Part IV. Column separations on a hydroxamic acid resin

Ion exchange separations on a new hydroxamic acid ion exchanger are described. Quantitative separation of iron(III) from various salts and from several analytical standards has been achieved, and sources of interference in the colorimetric determination of iron with thioglycollic acid can be eliminated. Quantitative separations of copper from iron and from cobalt and nickel are possible. Recoveries and separations of iron and uranium from simulated sea-water samples are demonstrated.     

Contributions to the basic problems of complexometry—X: Determination of nickel and cobalt in the presence of iron, copper and some other metals

A complexometric determination of nickel and cobalt in the same solution has been devised. It is based on the determination of the sum of nickel and cobalt by back-titration of added excess EDTA in a strongly alkaline medium with calcium chloride using Fluorexon (Calcein) as indicator. After oxidation of cobalt with hydrogen peroxide to form the cobalt^III- EDTA complex and screening of nickel by potassium cyanide, the liberated EDTA corresponding to the amount of nickel present is titrated with further calcium chloride. High concentrations of iron and aluminium are screened with triethanolamine. Copper and other heavy metals are screened with thioglycollic acid.     

Titrimetric microdetermination of uric acid and thioglycollic acid by amplification reactions

A simple amplification method for determination of 0.05-2 mg of uric acid or thioglycollic acid has been worked out. It depends on iodine oxidation of the uric acid or thioglycollic acid solutions, removal of the excess of iodine, oxidation of the resulting iodide with bromine, and iodometric titration of the resulting iodate. The coefficient of variation ranges from 0.7 to 2.4% for uric acid and from 0.5 to 1.9% for thioglycollic acid, depending on the amount of the acid.     

Electron transfer function of kerateine gel and conjugated redox reaction by using the kerateine-immobilized membrane

Kerateine gel, prepared by reducing wool keratin with alkaline 2-mercaptoethanol-urea solution and by partially reoxidizing the dissolved kerateine, reduced iron(III) to iron(II). Reduction of iron(III) was enhanced by addition of copper(II). Reduction of methylene blue (MB) to leuco MB with thioglycollic acid (TGA) as a model compound of wool thiol group was investigated in the presence of copper(II) and intercuticular cementing material (δ_Cu) extracted from wool fiber. It is confirmed that copper(II) is a catalyst for the reduction of MB and the δ_Cu containing copper ion acts as a carrier for electron transfer. Some kerateine/δ_Cu-immobilized hydrophilic polyurethane membranes were prepared. A conjugated redox reaction combining the reduction of MB and the oxidation of TGA was carried out across these membranes.     

Separation and concentration of molybdenum(VI) and tungsten(VI) with chelating ion-exchange resins containing sulphur ligands

Three chelating ion-exchange resins based on macroreticular polyacrylonitrile-divinylbenzene copolymers with thioglycollic acid and cysteine as functional groups have been tested for separation of molybdenum(VI) and tungsten(VI). On a short column of the thioglycollic acid resin, molybdenum(VI) and tungsten(VI) can be selectively sorbed from pH-4.3 acetate buffer and eluted with 2M hydrochloric acid and a mixture of 0.1M sodium hydroxide and 0.1M sodium chloride, respectively, with quantitative recovery even at very low concentrations. Simulated sea-water samples have been analysed.     

Pollution-free method for the determination of iron in iron ore

A method for the determination of total iron in iron ores and concentrates is described which avoids the use of mercuric chloride. The sample is decomposed either by an acid attack or by fusion with sodium peroxide. The hot sample solution in about 6M hydrochloric acid is treated with hot 10% stannous chloride solution till pale yellow, followed by addition of a slight excess of 2% titanous chloride solution; the excess is then oxidized with perchloric acid (1 + 1). The solution is rapidly cooled in ice-water, and the iron (II) is titrated with potassium dichromate (sodium diphenylsulphonate as indicator). The results show the same degree of precision, accuracy, and degree of interference as those obtained by the standard stannous chloride-mercuric chloride method.     

Spectrophotometric determination of titanium with tannin and thioglycollic acid and its application to titanium-treated steels and ferrous and non-ferrous alloys

A sensitive spectrophotometric method for the determination of titanium by formation of its complex with tannin and thioglycollic acid at pH 4 has been developed. The intense yellow colour is measured at 400 nm and the system obeys Beer's law over the range 0.2-5 ppm titanium in the solution measured. The method is applicable to titanium-treated steels, stainless steels, permanent magnet alloys and duralumin alloys. The interference of Co, Ni, Cr, Mn, V, Mo and W can be eliminated by prior separation of titanium by controlled addition of cupferron in the presence of thioglycollic acid (TGA). Copper can be quantitatively separated by precipitation with TGA and determined complexometrically with EDTA, with PAN as indicator. Niobium interferes even in traces.     

Kinetic determination of microamounts of some sulphur-containing ligands

Some sulphur-containing ligands have been shown to inhibit the Hg(II)-catalysed substitution of p-nitrosodiphenylamine (p-NDA) for cyanide in hexacyanoferrate(II), by binding the mercury(II). This effect is used for determination of microamounts of cysteine, thioglycollic acid and thiosulphate. The reactions are followed spectrophotometrically at 640 nm (lambda(max) of [Fe(CN)(5).p-NDA](3-)). The determination range depends on the amount of mercury(II) added and the stability of the Hg(II)-ligand complex. Under specified conditions, the detection limits are: thioglycollic acid 1 x 10(-7)M, cysteine 1 x 10(-6)M and thiosulphate 4 x 10(-7)M.     

Determination of metallic iron, iron(II) oxide, and iron(III) oxide in a mixture

A procedure is described for the estimation of metallic iron, ferrous oxide, and ferric oxide when present together. The sample is treated with bromine dissolved in ethanol, and filtered. Iron in the filtrate is titrated iodometrically, and corresponds to the metallic iron present in the mixture. The oxide residue is dissolved in hydrochloric acid under a carbon dioxide atmosphere. The iron(II) formed, equivalent to FeO present, is titrated with a standard vanadate solution, and the total iron(III) (FeO + Fe₂O₃) in the titrated solution is then estimated iodometrically.     

巯基乙酸为稳定剂在MWCNTs上原位生长CdSe量子点

以巯基乙酸作为稳定剂在无毒的溶剂中和较低的温度下实现了CdSe量子点在MWCNTs（多壁碳纳米管）上的原位生长,并用TEM、HRTEM、EDS、XRD、XPS和PL等工具对CdSe量子点-MWCNTs异质结（CdSe-MWCNTs）进行了表征.结果表明, CdSe量子点的晶型为立方晶型,平均粒径大约为4 nm, CdSe-MWCNTs也具有一定的荧光性质.     

Unified automated determination of silicon in iron ores, sinters, slags, iron and steel

An automatic absorptiometric method is presented for the determination of silicon in iron ores, sinters, slags, iron and steel. The last two are dissolved in dilute sulphuric acid; the others are fused with sodium peroxide, then dissolved in hydrochloric acid. After suitable additions and dilution, the resulting solutions are treated identically in a Technicon AutoAnalyzer. The silicomolybdate formed is reduced to molybdenum blue with iron(II). Fluoride is added to provide a redox buffering system. The novelty of the method lies in selecting the sample sizes, conditions of fusion and/or dissolution and dilutions so that this universality is attained. Thus a single programme for the analyzer serves to determine, in any sequence, silicon in iron ores or sinters (1-6%), slags (3-10%), iron (0.4-2.5%) or steel (0.005-2%), the only change being in the tables used to translate transmittanee into per cent silicon. Both the precision and accuracy are satisfactory.     

Analytical applications of condensed phosphoric acid-I Determination of ferrous and total iron in iron ores after decomposition with condensed phosphoric acid

A simple method is described for the determination of ferrous and total iron in iron ores. Iron ores are dissolved by condensed phosphoric acid (CPA) very rapidly without any tedious and time-consuming manipulations such as elimination of silica and filtration. Under the proposed conditions (amount of sample 100 mg, amount of CPA added 10 g, heating temperature 290 degrees , heating time 30 min), magnetite, limonite and hematite are completely dissolved. The iron content can be determined in the presence of condensed phosphoric acid by titration with dichromate solution, if a slight modification is made. The total iron in iron ores, determined by the present method, is in agreement with that found by the JIS method. The ferrous iron in iron ores can be determined by dissolving the samples with CPA in a nitrogen atmosphere and titrating with dichromate solution. Chelatometric titration of iron after solvent extraction with MIBK from solutions prepared by use of CPA is found to be accurate for samples such as pyrite cinder. The ability of CPA to dissolve various materials has been investigated.     

Simultaneous spectrophotometric determination of humic acid and iron in water

A simple and rapid method for the determination of humic acid and iron in solution is described. Two absorbance measurements are required, one on an untreated sample aliquot, and the other on an aliquot treated to enhance iron absorptivity. The method requires sample volumes of less than 15 ml and is sensitive enough for direct application to most natural waters. Limits of detection for each component vary with concentration of the other, but 0.01 mg 1^?1 for humic acid and 0.04 μM for iron can be achieved. For six natural waters, determinations based on independent calibration curves for each component gave results 6–40$ higher for iron, and 6–29% higher for humic acid, than results obtained by the proposed method. The interference of fulvic acid and the use of different humic acid standards are examined.     

Hepcidin in iron metabolism

Hepcidin, which has been recently identified both by biochemical and genomic approaches, is a 25 amino acid polypeptide synthesized mainly by hepatocytes and secreted into the plasma. Besides its potential activity in antimicrobial defense, hepcidin plays a major role in iron metabolism. It controls two key steps of iron bioavailability, likely through a hormonal action: digestive iron absorption by enterocytes and iron recycling by macrophages. In humans, this could explain that low levels of hepcidin found during juvenile haemochromatosis and HFE-1 genetic haemochromatosis are associated with an iron overload phenotype. Conversely, an increase of hepcidin expression is suspected to play a major role in the development of anemia of chronic inflammatory diseases. However, the regulatory mechanisms of hepcidin expression are multiple, including iron-related parameters, anemia, hypoxia, inflammation and hepatocyte function. Therefore, many physiological and pathological situations may modulate hepcidin expression and subsequently iron metabolism. A better knowledge of the biological effects of hepcidin and of its expression regulatory mechanisms will clarify the place of hepcidin in the diagnosis and treatment of iron-related diseases.     

Rapid chelometric determination of lead in lubricating oils via mercaptoacetate extraction

A rapid complexometric method for the estimation of lead in lubricating oil has been developed. The lead naphthenate present in the oil is extracted with a mixture of dilute thioglycollic acid and nitric acid. The aqueous extract containing lead mercaptoacetate is titrated with EDTA at pH 5 with Xylenol Orange as indicator. The lead content can be determined within 15-20 min.     

Flow-injection analysis of silicate rocks for total iron and aluminium

A flow-injection method is described for the spectrophotometric determination of total iron and aluminium in silicate rocks. Rock samples are opened up by fusion with a mixture of lithium carbonate and boric acid, the melt is taken up in 1M hydrochloric acid and the resulting solution is used for the determination of both iron and aluminium. The flow system for the determination of iron needs no particular reagents, involving simply measurement of the absorbance of the chloro-complex of iron(III) at 335 nm. The system for aluminium consists of the reduction of iron(III) to iron(II), colour development with Xylenol Orange (XO), destruction of XO-chelates other than that of aluminium by addition of EDTA and subsequent measurement of the absorbance of the aluminium-XO complex at 506 nm. The systems permit semi-automatic, rapid analysis of silicate rocks for iron and aluminium. Results obtained for standard rocks were in good agreement with the recommended values. The precision ranged from 0.1 to 0.9% for iron and from 0.3 to 0.7% for aluminium.     

Contributions to the basic problems of complexometry—VIII Thioglycollic acid as a masking agent

The masking properties of thioglycollic acid (TGA) as well as the possibilities of its use in complexometry have been studied. It has been found that thioglycollic acid in an alkaline medium perfectly masks metals such as Pb, Bi, Cd, Ag, Hg, Zn, Tl, In and Sn because of the formation of colourless complexes. In this medium TGA forms intensely coloured complexes with Fe, Co and Ni. The red coloration of the Fe-TGA complex can be prevented by the addition of triethanolamine. It has been found that the Ni- and Co-EDTA complexes do not react with TGA. This enables a highly selective determination of nickel and cobalt to be made. Also, manganese can be determined in the presence of other metals screened with TGA. The advantages of TGA in comparison with potassium cyanide are discussed.     

Colorimetric determination of iron with meconic acid

Meconic acid, a suitable reagent for the colorimetric determination of ferric iron, is presented. The nature of the chemical behaviour of the complex has been studied. The reagent must be used in acid medium (pH = 1). When the observation is made in Nessler's cylinder the sensitivity is one part in 5.000,000; in spot-plate the limit of identification is 0.5 microgram at a limiting concentration of 1 :400.000. The colored complex obeys Beer's law over a useful range of iron concentration.     

Rapid estimation of metallization in reduced iron oxide ores

A simple and accurate method is described for the determination of degree of metallization in reduced iron oxide ores. Both metallic iron and total iron are determined in a single sample. The metallic iron is selectively dissolved in copper sulphate solution and the oxides are filtered off. The filtrate is titrated with potassium dichromate solution. The residue is dissolved in dilute sulphuric acid in presence of excess of copper powder and after filtration is titrated with the same dichromate solution. The first value gives the metallic iron content and the second value gives the iron content of the oxide residue. From these two values, the degree of metallization is computed.