焙烧处理下二氧化钛/钛酸盐纳米材料晶型和形貌的变化规律研究

通过调控酸碱浓度, 在水热条件下得到了金红石、锐钛矿、板钛矿、钛酸钠等一系列TiO₂/钛酸盐产物. 对上述TiO₂、酸洗处理后的钛酸盐等一系列不同晶型、不同形貌的样品进行焙烧处理, 系统性地研究焙烧温度的逐渐升高对产物晶型转变和形貌演化的规律性影响. 给出了水热酸碱浓度以及焙烧温度两个因素与TiO₂/钛酸盐纳米材料晶型和形貌变化行为关系的二维示意图. 依据奥斯特瓦尔德阶梯规则、经典热力学理论以及定向附着生长机理, 对TiO₂/钛酸产物的晶型晶体生长、晶型转变和形貌演化机理进行了探讨.     

静电纺丝法制备纳米氧化铟锡及其导电性能

采用静电纺丝-溶胶凝胶法,以SnCl2、InCl3、聚乙烯吡咯烷酮(PVP)等为原料,乙醇胺为水解控制剂,合成了超细氧化铟锡(ITO)纳米纤维及富氧缺陷的ITO纳米颗粒。采用透射电子显微镜(TEM)、选区电子衍射(SAED)、扫描电子显微镜(SEM)、热重分析(TGA)、X射线衍射(XRD)、X射线电子能谱(XPS)、四探针电阻仪,系统研究了超细ITO纤维及颗粒的形貌、晶型、氧缺陷及导电性能。在400℃空气煅烧后,纤维中的PVP高分子骨架发生热分解,获得超细、多孔ITO纳米纤维,晶型为立方相。进一步升高煅烧温度至800℃,ITO纳米纤维转变为富氧缺陷的纳米颗粒,晶格氧空位含量高达38.9%。随着煅烧温度升高,Sn4+掺入到In₂O₃晶格中,发生晶格膨胀,晶面间距增大。煅烧温度由400℃升高至800℃,未发生立方相向六方相的转变,晶型稳定,晶粒尺寸从32 nm生长到44 nm,晶格应变(ε0)从1.943×10^-3减小至1.422×10^-3,应变诱导的晶格弛豫逐渐减小。此外,高温煅烧可抑制In₂O₃晶粒(111)晶面的增长,随着In₂O₃的(400)与(222)晶面比值(I₍₄₀₀)/I₍₂₂₂))的增加,ITO电导率逐渐升高。在800℃获得的ITO纳米颗粒导电率最高。     

MnOδ催化剂的制备及对柴油机尾气炭烟颗粒燃烧的催化性能

基于氧化锰(MnO_x)催化剂优异的氧化还原性能,采用水热法制备了一系列具有层状结构的MnO_δ催化剂,并对其物化性能进行了表征.研究了水热反应温度、煅烧温度以及原料组成对催化剂晶体结构、形貌和氧化还原性能的影响,并将MnO_δ催化剂应用于柴油机尾气炭烟颗粒的催化燃烧.结果表明,当水热反应时间为12 h,煅烧温度为550℃,反应原料中KOH和K₂CO₃同时存在时,所制备的MnO_δ-t₁₂催化剂具有最佳的催化燃烧炭烟颗粒的活性, T₁₀, T₅₀和T₉₀值分别为274, 321和354℃.     

晶相可控的ZrO2纳米线的无卤制备及表征

采用无卤法制备晶相可控的ZrO₂纳米线. 通过静电纺丝法制备聚乙烯吡咯烷酮(PVP)与Zr(NO₃)₄的复合纤维; 再通过煅烧法在除去聚合物模板的同时制备ZrO₂纳米线. 采用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 傅里叶变换红外光谱(FTIR)仪及热重差热联用热分析仪(DSC-TGA)对材料的晶相结构、 形貌及热稳定性进行表征. 通过改变煅烧温度, 可以实现ZrO₂纳米材料形貌及晶相组成的调控.     

二氧化锰/石墨烯纸电极的制备及其电化学性能

通过电化学法使溶液中的Mn²⁺电解氧化为MnO₂,沉积复合在石墨烯片膜上,形成由MnO₂/石墨烯复合材料构成的纸电极。 采用X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)、循环伏安(CV)和恒流放电等技术手段对纸电极材料的结构、形貌以及电化学性能进行了研究。 结果表明,MnO₂球形颗粒均匀地沉积在石墨烯片膜上,形成了厚度45 μm的纸电极,经过380 ℃煅烧后,纸电极中的MnO₂晶型由γ-MnO₂转化为β/γ-MnO₂混合晶型,是良好的柔性Li/MnO₂电池的电极材料。 MnO₂/石墨烯纸电极在室温下0.1C放电容量达269 mA·h/g,而且电化学阻抗低、柔韧性好。     

N掺杂空心TiO2微球的合成与表征

采用无皂乳液聚合合成的聚苯乙烯(PS)微球为模板、氨水/三乙醇胺为催化体系, 通过溶胶-凝胶方法合成了PS/TiO₂(核/壳)复合微球, 然后通过煅烧制备了N掺杂、锐钛型空心TiO₂微球. 在反应体系中三乙醇胺扮演双重角色, 既是TiO₂生成及包覆过程的抑制剂又是空心TiO₂微球的N掺杂剂. 改变氨水、三乙醇胺和钛酸正丁酯用量可控制TiO₂壳的形态和尺寸. 氨水用量增加, PS/TiO₂复合微球的壳表面变得粗糙|三乙醇胺用量增加, 壳表面变得光滑|钛酸正丁酯用量提高导致壳层变厚. 改变三乙醇胺用量可调节空心TiO₂微球中的N掺杂量|N掺杂空心TiO₂微球具有可见光响应和光催化作用.     

棒状LiZnPO4的低温合成与表征

LiZnPO₄的性能与其形貌密切相关,其合成常用的固相法和水热法均无控制其微观形貌的优势。 本文采用改进的沉淀法成功合成了具有棒状结构的LiZnPO₄。 利用热重-差热分析仪(TG-DSC)、X射线衍射仪(XRD)、傅里叶变换红外光谱(FTIR)以及场发射扫描电子显微镜(FE-SEM)等技术研究了LiZnPO₄形成过程、晶相组成、微观结构和形貌。 同时探究了合成方法、煅烧温度、煅烧时间、酸的种类对LiZnPO₄形貌的影响。 结果表明,相比较于固相法,以醋酸为原料的改进沉淀法不仅可以有效降低LiZnPO₄的合成温度至500 ℃,而且很容易控制棒状LiZnPO₄的形成。 在600 ℃下煅烧2 h后可以获得分散性良好、横截面为矩形、直径约为2 μm的规则棒状LiZnPO₄。 此外,对比颗粒状LiZnPO₄和棒状LiZnPO₄的光响应能力,发现棒状LiZnPO₄的光响应能力明显增强。     

聚己内酯-b-聚丙烯酸胶束溶液对碳酸钙结晶的研究

以CaCl₂和Na₂CO₃为原料, 研究CaCO₃在聚己内酯-b-聚丙烯酸(PCL-b-PAA)胶束溶液中的结晶行为, 并探讨胶束溶液浓度对CaCO₃晶体组成及其形貌的影响. 采用氢核磁共振谱(¹H NMR)、透射电子显微镜(TEM), 傅里叶变换红外吸收光谱(FTIR)、X射线粉末衍射分析(XRD)、扫描电子显微镜(SEM)和电导率等测试手段对聚合物结构、胶束形貌和CaCO₃晶型及形貌进行表征. 结果表明, PCL-b-PAA胶束影响了CaCO₃的结晶过程, 得到了不易在水中存在的处于亚稳态的球霰石型CaCO₃晶体. 随胶束浓度的增加, 球霰石型CaCO₃的含量先增加而后减少|CaCO₃晶体的主要形貌由无规则形转变为球形.     

亚微米级四方相钛酸钡低温固相法制备及晶型控制

以八水合氢氧化钡和α-钛酸为原料,在相对低的焙烧温度下,制备出近似球形、亚微米级的钛酸钡。通过XRD、SEM、Raman和FTIR等手段对钛酸钡样品进行表征,样品具有高结晶度,颗粒均一性良好。晶型转变的初步探究表明,立方相为主的钛酸钡可以在400℃发生晶相转变,成为以四方相为主的钛酸钡。     

复合沉淀剂制备高质量碳酸镧及氧化镧的研究

为满足稀土工业生产对环保、经济的沉淀剂及沉淀技术的需求,以氯化镧料液为原料,碳酸氢钠和碳酸钠为复合沉淀剂制备了碳酸镧和氧化镧。研究了加料方式、复合沉淀剂配比、反应温度、料液浓度、料液及沉淀剂的流量、沉淀过程pH值范围、添加晶种等因素对碳酸镧形貌、粒度及氧化镧中Cl~-,Na₂O含量和稀土总量(REO)等理化性能的影响,运用SEM、粒度分析、XRD等手段对碳酸镧或对应氧化镧形貌、粒度进行了表征。结果表明,控制复合沉淀剂中碳酸氢钠和碳酸钠摩尔比为1∶4,反应温度30℃,料液浓度为110g·L^-1,料液流量为6.0mL·min^-1,沉淀过程pH值为4.0～4.5,在添加适量碳酸镧晶种和并流加料的条件下,可获得易沉降,粒度D50为23.46μm,形貌为片状堆叠成的类球形La₂(CO₃)₃·8H₂O晶体;灼烧后氧化镧产品稀土总量为99.62%,Cl~-和Na₂O含量分别为0.01%和0.001%,达到国家标准GB/T415...     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.