A reusable polymer anchored copper(II) complex catalyst for the efficient oxidation of olefins and aromatic alcohol

A new heterogeneous Schiff base copper(II) complex was prepared by reacting amino‐polystyrene with salicylaldehyde followed by complexation with cupric chloride. The structure of this immobilized complex has been established on the basis of scanning electron microscope (SEM), thermogravimetric analysis (TGA), elemental analysis employing atomic absorption spectroscopy (AAS), and spectrometric methods like diffuse reflectance spectra of solid (DRS) and fourier transform infrared spectroscopy (FTIR). Catalytic activity of this polymer anchored Cu(II) complex was tested by studying the oxidation of cyclohexene, styrene, and benzyl alcohol in the presence of tert‐ butylhydroperoxide as oxidant. Several parameters such as solvent, oxidant, reaction time, reaction temperature, amount of catalyst, and substrates oxidant ratio were varied to optimize the reaction condition. Under optimized reaction conditions, cyclohexene gave a maximum of 74% conversion with three major products 2‐cyclohexene‐1‐one, cyclohexene epoxide, and 2‐cyclohexene‐1‐ol. The conversions of styrene and benzylalcohol proceed with 53% and 77%, respectively. Styrene gives styrene epoxide as the major product while benzylalcohol gives benzaldehyde as the major product. The catalytic results reveal that polymer anchored copper(II) Schiff base complex can be recycled more than five times without much loss in the catalytic activity. Copyright © 2009 John Wiley & Sons, Ltd.     

A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

“Radical‐controlled” oxidative polymerization of phenol: Comparison with that of 4‐phenoxyphenol

“Radical‐controlled” oxidative polymerization of phenol (p‐1) by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) catalyst was performed and compared with that of 4‐phenoxyphenol (p‐2) in detail. Although the coupling selectivity for p‐1 seemed to be controlled by the catalyst, the C? C coupling, which was excluded completely for p‐2, occurred to some extent. The initial reaction rate of p‐1 was much smaller than that of p‐2, leading to the difference of polymerization behavior between p‐1 and p‐2. The rate‐determining step would be the coupling of controlled radicals species from the ESR measurement of the reaction mixture. The polymer resulting from p‐1 consisted mainly of phenylene oxide units, but had no crystallinity in contrast to the crystalline polymer from p‐2. However, the present polymer showed the highest thermal stability in the polymers obtained by oxidative polymerization of p‐1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1955–1962, 2005     

Tailor‐made poly(ethyl acrylate) by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of ethyl acrylate (EA) was carried out using different initiators, CuBr or CuCl as catalyst in combination with different ligands e.g., 2,2′‐bipyridine (bpy) and N,N,N′,N″N″‐pentamethyl diethylenetriamine (PMDETA). Use of PMDETA as ligand resulted in faster polymerization rate (95% conversion in 15 min) than those using bipyridine (～58% conversion in 10.5 h). This is due to the lower reduction potential of copper‐amine than that of copper‐bpy complex, resulting in higher rates of activation of dormant halides. Use of ethylene carbonate as solvent lead to faster polymerization rate and better control in polymerization when compared with p‐xylene as solvent. The reaction temperature had a positive effect on polymerization rate and the optimum reaction temperature was found to be 90 °C. An apparent enthalpy of activation of ～85 kJ/mol was determined for the ATRP of ethyl acrylate, corresponding to an enthalpy of equilibrium of ～64 kJ/mol. By judicious choice of the reaction parameters it was possible to tailor the end group of the final polymer. MALDI‐TOF‐MS analysis and the chain extension experiment of poly(ethyl acrylate) (PEA) prepared using bpy as ligand showed the presence of ? Br as the end group. On the contrary, when PMDETA was used as the ligand, the mass spectra analysis showed hydrogen terminated polymer as the major species towards the end of polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1661–1669, 2007     

Effect of the synthetic method and support porosity on the structure and performance of silica‐supported CuBr/pyridylmethanimine atom transfer radical polymerization catalysts. II. Polymerization of methyl methacrylate

A systematic study of the effect of the synthesis method and catalyst structure on the atom transfer radical polymerization (ATRP) performance of copper(I) bromide/pyridylmethanimine complexes supported on silica is described. Four different synthetic routes, including multistep‐grafting (M1), two‐step‐grafting (M2), one‐pot (M3), and preassembled‐complex (M4) methods, have been evaluated on three different silica supports (mesoporous SBA15 with 48‐ and 100‐Å pores and nonporous Cab‐O‐Sil EH5). The resulting solids have been used for ATRP of methyl methacrylate. The catalysts allow for moderate to poor control of the polymerization, with polydispersity indices (PDIs) ranging from 1.46 to greater than 2. The materials made with the preassembled‐complex (M4) and one‐pot (M3) approaches are generally more effective than those prepared with a grafting method (M1 and M2) on porous silica, whereas all the methods provide similarly performing catalysts on the nonporous support. Nonporous Cab‐O‐Sil EH5 is the most effective support because of its small particle size, lack of porosity, and relative compatibility in the reaction media. All the catalysts leach copper into solutions in small amounts. In addition, the catalysts can be effectively recycled, with improved controlled character in recycle runs (PDI ～ 1.2). Control experiments have shown that this improved performance of the used catalysts is likely due to the presence of a soluble Cu(II) complex in the materials that effectively deactivates the growing polymer chain, leading to narrow PDIs and controlled molecular weights. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1384–1399, 2004     

Monomer/polymer Schiff base copper(II) complexes for catalytic oxidative polymerization of 2,2′‐dihydroxybiphenyl

Catalytic oxidative polymerization of 2,2′‐dihydroxybiphenyl (DHBP) was performed by using both the Schiff base monomer‐Cu(II) complex and Schiff base polymer‐Cu(II) complex compounds as catalysts and hydrogen peroxide as oxidant, respectively. The dependence of monomer conversion and molecular weight distribution on various reaction parameters, including time, temperature, solvent as well as the amount of catalyst and oxidant were investigated. The structure of the poly‐2,2′‐dihydroxybiphenyl (PDHBP) was confirmed by UV‐vis, IR, ¹H and ¹³C NMR spectroscopy techniques. The electrochemical and thermal properties of PDHBP were also studied. DSC data revealed that PDHBP was amorphous. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2977–2984, 2009     

Recyclable Cu nanoparticle catalyzed azide-alkyne click polymerization

The Cu(I)-catalyzed alkyne-azide cycloaddition(CuAAC) has been developed into a powerful polymerization reaction for the synthesis of new polytriazoles with versatile properties. However, research on recyclable and reusable copper catalyst for click polymerization to meet the requirement of green chemistry was rarely reported. Copper nanoparticles were reported to be capable catalysts for CuAAC. Replacing conventional copper catalyst with copper nanoparticles may realize the recycle and reuse of the copper catalyst in click polymerization. In this paper, copper nanoparticles were prepared and used as an effective catalyst for click polymerization, and soluble polytriazoles with high molecular weights were obtained in excellent yields under optimized reaction conditions. Importantly, the copper nanoparticles can be recycled and reused for up to 11 times for the click polymerization. Moreover, introducing aggregation-induced emission(AIE)-active moiety of tetraphenylethylene into the monomers makes the resultant polymers retain the AIE feature. This work not only provides an efficient recyclable catalytic system for the azide-alkyne click polymerization, but also might inspire polymer chemists to use recyclable copper species to catalyze other polymerizations.     

Copper‐mediated initiators for continuous activator regeneration atom transfer radical polymerization of acrylonitrile

Initiators for continuous activator regeneration atom transfer radical polymerization technique was first accessed to acrylonitrile by using CuBr₂/2,2′‐bipyridine as the catalyst, ethyl 2‐bromoisobutyrate as the halogen initiator, and azobis(isobutyronitrile) as the free radical initiator. The key to success is ascribed to the facile achievement of the rapid equilibrium between active species and dormant species. Effects of ligand, catalyst concentration, free radical initiator concentration, and reaction temperature on the polymerization reaction and molecular weight (MW) as well as polydispersity index (PDI) were investigated in detail. The polymerization proceeded in a controlled/living fashion even though the concentration of copper catalyst decreased to 50 ppm, which is evident in pseudo first‐order kinetics of polymerization, linear increase of molecular weight, low PDI, and high chain‐end functionality of the generated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Atom transfer radical polymerization of methyl methacrylate via reversibly supported catalysts on silica gel via self‐assembly

A reversible catalyst immobilization system via self‐assembly of hydrogen bonding between thymine anchored on silica gel support and 2,6‐diaminopyridine functionalized with a catalyst (copper bromide‐N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) complex) was developed for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). At elevated temperatures, the hydrogen bonding disassociated and released the catalyst as free small molecules for catalysis, which effectively mediated a living polymerization of MMA, producing PMMA with controlled molecular weight and narrow molecular weight distribution (<1.3). At room temperature, the catalyst assembled on the silica gel support by hydrogen bonding, and thus could be recovered and reused for a second run of ATRP. The recovered catalyst still mediated a living polymerization of MMA with reduced activity (54–64%), but had much improved control of the polymerization. The resulting PMMA had molecular weights very close to theoretical vales. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 22–30, 2004     

Polymerization of methyl methacrylate with nickelocene‐methylaluminoxane catalyst

The polymerization of methyl methacrylate (MMA) catalyzed with cyclopentadienylnickel‐methylaluminoxane (Cp₂Ni‐MAO) was investigated. Polymerization readily proceeds with this catalyst, and the resulting polymer is rich in syndiotactic content. The effects of the MAO/Ni system on the polymerization activity of MMA were observed, and it was found that only small amounts of MAO are required to reach high polymerization activity.     

Copper(I) stabilized on N,N′-methylene bis-acrylamide crosslinked polyvinylpyrrolidone: An efficient reusable catalyst for click synthesis of 1,2,3-triazoles in water

N,N′-methylene bis-acrylamide crosslinked N-vinyl-2-pyrrolidone (NVPMBA) polymer was prepared via suspension polymerization technique and used as a polymeric support for the reduction of Cu(II) to Cu(I). It was observed that NVPMBA matrix facilitated the stabilization of Cu(I) particles. Furthermore, the copper supported polymer catalyst (CuNVPMBA) was characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscopy (SEM), energy dispersive X-ray analysis, transmission electron microscope (TEM), X-ray photoelectron spectra (XPS), inductively coupled plasma optical emission spectroscopy, and derivative thermogravimetry analysis. SEM showed that both the polymer and CuNVPMBA exhibit a spherical morphology. TEM revealed that copper nanoparticles formed on the polymer surface have an average particle size of 5.14 nm. XPS analysis confirmed the presence of Cu(I) and Cu(II) in the ratio 1:2. The copper content in CuNVPMBA was found to be 1.25 wt%. CuNVPMBA was found to be very effective in promoting the click reaction between terminal alkynes and azides in aqueous media in the absence of ascorbate or external base under mild conditions to form 1,2,3-triazoles in excellent yield with a copper loading as low as 0.2 mol%. The catalyst could be reused and recycled several times without significant loss of catalytic activity.     

Polymerization of epoxidized vegetable oil derivatives: Ionic‐coordinative polymerization of methylepoxyoleate

Ring‐opening polymerization of epoxidized methyloleate (EMO) with various ionic‐coordinative initiators have been studied and compared with other internal epoxy monomers: benzyl 9,10‐epoxyoleoylether and cis‐4,5‐epoxyoctane. The structure and molecular weight of the resulting polymers have been studied by ¹H‐ and ¹³C‐NMR, MALDI‐TOF‐MS, and size exclusion chromatography analysis. Polymers with higher molecular weight than those obtained with conventional cationic catalyst are obtained. These materials have been found to consist of a complex mixture of cyclic and linear polymer chains with different chain ends that can be related to the catalyst nature and the occurrence of two main polymerization mechanisms, the cationic and the ionic‐coordinative. In the polymerization of EMO, transesterification by‐side reactions leading to ester linkages in the main chain have been identified. These undesired reactions have been suppressed by copolymerization with small amounts of tetrahydrofuran with no substantial decrease in the polymer yield and molecular weight. Finally, the polymerization of EMO has been tested in a larger scale to prepare a renewable resource‐based polyether as starting material to produce polyether polyols for polyurethane applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Catalytic Activity Dependency on Catalyst Components in Aerobic Copper–TEMPO Oxidation

The influence of catalyst components in the copper–TEMPO (2,2,6,6‐tetramethylpiperidine N‐oxide) catalysed aerobic oxidation of alcohols was investigated. The type and amount of base greatly influences reactivity. The bipyridyl ligand concentration had no major influence on catalysis, but excessive amounts led to a decrease in activity for longer reaction times. The kinetic dependency for TEMPO was found to be 1.15, and for copper 2.25, which is an indication of a binuclear catalytic system. Optimised conditions with various allylic and aliphatic alcohols give good to excellent rapid oxidations.     

Divergent synthesis of dendrimer‐like macromolecules through a combination of atom transfer radical polymerization and click reaction

This article describes a divergent strategy to prepare dendrimer‐like macromolecules from vinyl monomers through a combination of atom transfer radical polymerization (ATRP) and click reaction. Firstly, star‐shaped polystyrene (PS) with three arms was prepared through ATRP of styrene starting from a three‐arm initiator. Next, the terminal bromides of the star‐shaped PS were substituted with azido groups. Afterwards, the azido‐terminated star‐shaped PS was reacted with propargyl 2,2‐bis((2′‐bromo‐2′‐methylpropanoyloxy)methyl)propionate (PBMP) via click reaction. Star‐shaped PS with six terminal bromide groups was afforded and served as the initiator for the polymerization of styrene to afford the second‐generation dendrimer‐like PS. Iterative process of the aforementioned sequence of reactions could allow the preparation of the third‐generation dendrimer‐like PS. When the second‐generation dendrimer‐like PS with 12 bromide groups used as an initiator for the polymerization of tert‐butyl acrylate, the third‐generation dendrimer‐like block copolymer with a PS core and a poly (tert‐butyl acrylate) (PtBA) corona was afforded. Subsequently PtBA segments were selectively hydrolyzed with hydrochloric acid, resulting an amphiphilic branched copolymer with inner dendritic PS and outer linear poly(acrylic acid) (PAA). Following the same polymerization procedures, the dendrimer‐like PS and PS‐block‐PtBA copolymers of second generation originating from six‐arm initiator were also synthesized. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3330–3341, 2007     

Atom transfer radical polymerization of methyl methacrylate catalyzed by cobalt catalyst system

A new catalyst system, CoCl₂/tris(2‐(dimethyl amino) ethyl)amine (Me₆ TREN), was used to catalyze the polymerization of methyl methacrylate (MMA) successfully through atom transfer radical polymerization mechanism. The control over the polymerization was not ideal, the molecular weight distribution of the resulting polymer (PMMA) was relatively broad (M_w/M_n = 1.63–1.80). To improve its controllability, a small amount of hybrid deactivator (FeBr₃/Me₆TREN or CuBr₂/Me₆TREN) was added in the cobalt catalyst system. The results showed that the level of control over the polymerization was significantly improved with the hybrid cobalt–iron (or cobalt–copper) catalyst system; the polydispersity index of the resulting polymer was reduced to a low level (M_w/M_n = 1.15–1.46). Furthermore, with the hybrid cobalt–iron catalyst, the dependence of the propagation rate on the temperature and the copolymerization of methacrylate (MA) with PMMA‐Br as macroinitiator were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5207–5216, 2005     

Controlled ring‐opening polymerization of propylene oxide catalyzed by double metal‐cyanide complex

A double metal‐cyanide catalyst based on Zn₃[Co(CN)₆]₂ was prepared. This catalyst is very effective for the ring‐opening polymerization of propylene oxide. Polyether polyols of moderate molecular weight having low unsaturation (<0.015 meq/g) can be prepared under mild conditions. The molecular weight of polymer is entirely controlled by a reacted monomer‐to‐initiator ratio. The polymers prepared with stepwise addition of monomer exhibit a narrower molecular weight distribution as compared with those prepared with one‐step addition of monomer. Various compounds containing active hydrogen, except basic compounds and low‐carbon carboxylic acid, may be used as initiators. The reaction rate increases with increasing catalyst amount and decreases with rising initiator concentration. Polymerization involves a rapid exchange reaction between the active species and the dormant species. It was also proven that, to a certain extent, the chain termination of this catalytic system is reversible or temporary. ¹³C NMR analysis showed that the polymer has a random distribution of the configurational sequences and head‐to‐tail regiosequence. It is assumed that the polymerization proceeds via a cationic coordination mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1142–1150, 2002     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Coupling selectivity in the radical‐controlled oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) complex

Various effects on the coupling selectivity of the oxidative polymerization of 4‐phenoxyphenol catalyzed by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) halogeno complex [Cu(tacn)X₂] are described. With respect to the amount of the catalyst and the nature of the halide ion (X) of Cu(tacn)X₂, the coupling selectivity hardly changed. The Cu(tacn) catalyst possessed a turnover number greater than 1860. As the temperature of the reaction and the polarity of the reaction solvent were elevated, the C O coupling at the o‐position increased, but the C C coupling was not involved. For the polymerization in toluene at 80 °C, poly(1,4‐phenylene oxide), obtained as a methanol‐insoluble part, showed the highest number‐average molecular weight of 4000 with a melting point (T_m) of 195 °C. Only a slight change in the coupling selectivity was observed in the presence or absence of hindered amines as the base. Surprisingly, however, the C O selectivity decreased from 100 to 24% with less hindered amines, indicating that the selectivity drastically changed from a preference for C O coupling to a preference for C C coupling. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4792–4804, 2000     

Efficient alkyne homocoupling catalysed by copper immobilized on functionalized silica

Copper immobilized on a functionalized silica support is a good catalyst for the homocoupling of terminal alkynes. The so‐called Glaser–Hay coupling reaction can be run in air with catalytic amounts of base. The copper catalyst is active for multiple substituted alkynes, in both polar and non‐polar solvents, with good to excellent yields (75–95%). Depending on the alkyne, full conversion can be achieved within 3–24 h. The catalyst was characterized by TGA, inductively coupled plasma and X‐ray photoelectron spectroscopy. Leaching tests confirm that the catalyst is and remains heterogeneous. Importantly, the overall reaction requires only alkyne and oxygen (in this case, air) as reagents, making this a clean catalytic oxidative coupling reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,characterization, and thermal properties of dendrimer‐star,block‐comb copolymers by ring‐opening polymerization and atom transfer radical polymerization

Novel and well‐defined dendrimer‐star, block‐comb polymers were successfully achieved by the combination of living ring‐opening polymerization and atom transfer radical polymerization on the basis of a dendrimer polyester. Star‐shaped dendrimer poly(?‐caprolactone)s were synthesized by the bulk polymerization of ?‐caprolactone with a dendrimer initiator and tin 2‐ethylhexanoate as a catalyst. The molecular weights of the dendrimer poly(?‐caprolactone)s increased linearly with an increase in the monomer. The dendrimer poly(?‐caprolactone)s were converted into macroinitiators via esterification with 2‐bromopropionyl bromide. The star‐block copolymer dendrimer poly(?‐caprolactone)‐block‐poly(2‐hydroxyethyl methacrylate) was obtained by the atom transfer radical polymerization of 2‐hydroxyethyl methacrylate. The molecular weights of these copolymers were adjusted by the variation of the monomer conversion. Then, dendrimer‐star, block‐comb copolymers were prepared with poly(L ‐lactide) blocks grafted from poly(2‐hydroxyethyl methacrylate) blocks by the ring‐opening polymerization of L ‐lactide. The unique and well‐defined structure of these copolymers presented thermal properties that were different from those of linear poly(?‐caprolactone). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6575–6586, 2006