Synthesis and characterization of biocompatible, thermoresponsive ABC and ABA triblock copolymer gelators

The synthesis of doubly thermoresponsive PPO-PMPC-PNIPAM triblock copolymer gelators by atom transfer radical polymerization using a PPO-based macroinitiator is described. Provided that the PPO block is sufficiently long, dynamic light scattering and differential scanning calorimetry studies confirm the presence of two separate thermal transitions corresponding to micellization and gelation, as expected. However, these ABC-type triblock copolymers proved to be rather inefficient gelators: free-standing gels at 37 degrees C required a triblock copolymer concentration of around 20 wt%. This gelator performance should be compared with copolymer concentrations of 6-7 wt% required for the PNIPAM-PMPC-PNIPAM triblock copolymers reported previously. Clearly, the separation of micellar self-assembly from gel network formation does not lead to enhanced gelator efficiencies, at least for this particular system. Nevertheless, there are some features of interest in the present study. In particular, close inspection of the viscosity vs temperature plot obtained for a PPO43-PMPC160-PNIPAM81 triblock copolymer revealed a local minimum in viscosity. This is consistent with intramicelle collapse of the outer PNIPAM blocks prior to the development of the intermicelle hydrophobic interactions that are a prerequisite for macroscopic gelation.     

Micellization to gelation of a triblock copolymer in water: Thermoreversibility and scaling

Aqueous solutions of a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock copolymer, Pluronic F108 (PEO₁₃₃PPO₅₀PEO₁₃₃), ranging from 1 to 35 wt %, were studied with differential scanning microcalorimetry and rheology. The thermoreversible micellization and gelation were examined through a heating process and a subsequent cooling process at a fixed rate of 1 °C/min. The critical micellization temperature (CMT), determined by the onset temperature of the endothermic peak in the heating process, was a decreasing function of the F108 concentration. A small secondary endothermic peak appeared only when the polymer concentration was 22.5 wt % or higher, indicating that there was a sol–gel transition but that the gelation was a nearly athermic process. Upon heating, an abrupt increase was observed in both the dynamic storage modulus (G′) and dynamic loss modulus (G″) within a narrow temperature range. T_G′, the temperature for the transition in G′, was a linear decreasing function of the polymer concentration and different from CMT. T_G′ tended to approach CMT with an increasing F108 concentration. Beyond this transition, G′ reached a plateau, and the plateau increased in height and broadened with the polymer concentration. The value of G′ at 70 °C (G′₇₀) could be approximately scaled with concentration c by G′₇₀ ∝ c^7.3. In addition, the definition for a gel to obey G′ > G″ was valid only when c was greater than 22.5 wt %, and this was in agreement with the secondary endothermic peak found with differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2014–2025, 2004     

Salt-induced micellization of a triblock copolymer in aqueous solution: a 1H nuclear magnetic resonance spectroscopy study

An aqueous micellar solution of a PEO-PPO-PEO triblock copolymer, pluronic F88 (EO103PO39EO103), in the presence of salt (KCl) has been investigated by 1H NMR spectroscopy. The hydrogen-bonding structure in water is directly changed by the strong polarization effect of added salt, which indirectly weakens the interaction of polymer molecules with water. Both EO and PO blocks are dehydrated by the addition of salt in a similar way, whereas the solubility of the PO blocks may be affected in a more pronounced way, which results in the decrease of the critical micellization temperature (CMT). It is found that the addition of salt favors a more compact micellar core, where the water content is decreased and an effective PO-PO interaction is increased. Increasing the salt concentration would result in a decrease in the number of gauche conformers in the PPO chain, which may be the deeper reason for the decreasing solubility of PPO segments in aqueous salt solution. The temperature region over which the micellization occurs is broad, indicating that micelles and unimers coexist over an extended temperature range, whereas this transition region is significantly narrowed by the addition of salt. The addition of salt offers a good substitute way of changing the temperature to induce micellization. The critical micellization salt concentration (CMSC) is determined to be 1.0 mol l-1 for KCl in 2.5% aqueous pluronic F88 solution at 25 degrees C, and the transition region in which both free and associated copolymer molecules coexist is defined to range from 1 to 2 mol L-1.     

Interactions of charged porphyrins with nonionic triblock copolymer hosts in aqueous solutions

The extent and locus of solubilization of guest and self-assembling surfactant host molecules in aqueous solutions are influenced by a variety of hydrophobic and hydrophilic interactions, as well as by more specific interactions between the various species present. By using a combination of two-dimensional heteronuclear 13C[1H] NMR correlation experiments with pulsed-gradient NMR diffusion and proton cross-relaxation measurements, the locations and distributions of porphyrin guest molecules have been established unambiguously with respect to the hydrophobic and hydrophilic moieties of a triblock copolymer species in solution. The interactions of tetra(4-sulfonatophenyl)porphyrin with the poly(propylene oxide) (PPO) and the poly(ethylene oxide) (PEO) segments of amphiphilic PEO-PPO-PEO triblock copolymer species have been measured as functions of solution conditions, including temperature and pH. The porphyrin/PEO-PPO-PEO interactions are established to be selective and adjustable according to the different temperature-dependent hydrophilicities or hydrophobicities of the PEO and PPO triblock copolymer components. Furthermore, such interactions influence the self-assembly properties of the block-copolymer amphiphiles in solution by stabilizing molecular porphyrin/PEO-PPO-PEO complexes well above the critical micellization temperature of the triblock copolymer species under otherwise identical conditions.     

Sphere-to-rod transition of short-chain PEO-b-PDMS-b-PEO in aqueous solution induced by copolymer concentration

A short-chain triblock copolymer EO9-DMS7-EO9 was synthesized by coupling reaction of allyl-terminated poly（ethylene oxide） and Si-H-terminated poly（dimethylsiloxane）. The structure and purity of synthesized copolymer was carefully characterized. Self-assembly behavior of EO9-DMST-EO9 triblock copolymer in water was investigated. And it was found that along with the increase of copolymer concentration, morphology of self-assembled aggregates transits from sphere to rod. A plausible understanding of the morphology transition for the investigated triblock copolymer was proposed.     

Phase behavior and local dynamics of concentrated triblock copolymer micelles

We report a neutron-scattering study to characterize the ordering and local dynamics of spherical micelles formed by the triblock copolymer polyethylene oxide (PEO)--polypropylene oxide (PPO)--polyethylene oxide (Pluronic) in aqueous solution. The study focuses on two Pluronic species, F68 and F108, that have the same weight fraction of PEO but that differ in chain length by approximately a factor of 2. At sufficiently high concentration, both species undergo a sequence of phase changes with increasing temperature from dissolved chains to micelles with liquid-like order to a cubic crystal phase and finally back to a micelle liquid phase. A comparison of the phase diagrams constructed from small-angle neutron scattering indicates that crystallization is suppressed for shorter chain micelles due to fluctuation effects. The intermediate scattering function I(Q,t)I(Q,0) determined by neutron spin echo displays a line shape with two distinct relaxations. Comparisons between I(Q,t)I(Q,0) for fully hydrogenated F68 chains in D2O and for F68 with deuterated PEO blocks reveal that the slower relaxation corresponds to Rouse modes of the PPO segments in the concentrated micelle cores. The faster relaxation is identified with longitudinal diffusive modes in the PEO corona characteristic of a polymer brush.     

Efficient formation of multicompartment hydrogels by stepwise self-assembly of thermoresponsive ABC triblock terpolymers

The gelation behavior of a poly(ethylene-alt-propylene)-b-poly(ethylene oxide)-b-poly(N-isopropylacrylamide) (PON) triblock terpolymer and a poly(N-isopropylacrylamide)-b-poly(ethylene oxide)-b-poly(N-isopropylacrylamide) (NON) triblock copolymer was studied by rheology over the concentration range 1-5 wt %. In comparison to the NON copolymer, gelation of the PON terpolymer was achieved at a much lower concentration, with a much sharper sol-gel transition. This is due to a stepwise gelation of PON terpolymers involving micellization at room temperature and gelation at elevated temperatures. The separation of micellization and gelation leads to the formation of a two-compartment network as observed by cryoTEM. The results highlight the intricate and tunable nanostructures and new properties accessible from ABC terpolymer hydrogels.     

Aggregation behavior of pluronic triblock copolymer in 1-butyl-3-methylimidazolium type ionic liquids

Three amphiphilic poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) ethers triblock copolymers, denoted Pluronic L61 (PEO3PPO30PEO3), Pluronic L64 (PEO13PPO30PEO13), and Pluronic F68 (PEO79PPO30PEO79) were shown to aggregate and form micelles in ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). The surface tension measurements revealed that the dissolution of the copolymers in ILs depressed the surface tension in a manner analogous to aqueous solutions. The cmcs of three triblock copolymers increase following the order of L61, L64, F68, suggesting that micellar formation was driven by solvatophobic effect. cmc and gamma cmc decrease with increasing temperature because hydrogen bonds between ILs and hydrophilic group of copolymers decrease and accordingly enhance the solvatophobic interaction. Micellar droplets of irregular shape with average size of 50 nm were observed. The thermodynamic parameters DeltaGm0, DeltaHm0, DeltaSm0 of the micellization of block copolymers in bmimBF4 and bmimPF6 were also calculated. It was revealed that the micellization is a process of entropy driving, which was further confirmed by isothermal titration calorimetry (ITC) measurements.     

Ion gels by self-assembly of a triblock copolymer in an ionic liquid

We report a new way of developing ion gels through the self-assembly of a triblock copolymer in a room-temperature ionic liquid. Transparent ion gels were achieved by gelation of a poly(styrene-block-ethylene oxide-block-styrene) (SOS) triblock copolymer in 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) with as low as 5 wt % SOS triblock copolymer. The gelation behavior, ionic conductivity, rheological properties, and microstructure of the ion gels were investigated. The ionic conductivity of the ion gels is only modestly affected by the triblock copolymer network. Its temperature dependence nearly tracks that of the bulk ionic liquid viscosity. The ion gels are thermally stable up to at least 100 degrees C and possess significant mechanical strength. The results presented here suggest that triblock copolymer gelation is a promising way to develop highly conductive ion gels and provides many advantages in terms of variety and processing.     

Supramolecular association of a triblock copolymer in water

Solutions of a poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) triblock copolymer, Pluronic F(68), were investigated in isothermal and isopleth mode. Surface tension, sigma, dynamic shear viscosity, n(omega), QELS experiments, and volumetric, colligative, and refractive index measurements characterize the system behavior in a wide range of compositions and temperatures. The thermodynamic properties associated with micelle formation, above the critical micellar temperature, were determined by different experimental methods. The large entropic contributions to the system stability are ascribed to significant dehydration of the oxypropylene portion in the copolymer, consequent to micelle formation. Temperature has a pronounced effect on the association features of F(68). It gives rise to abrupt changes in QELS and rheological properties when the critical micellar temperature is approached. Such effects are explained in terms of thermally driven micellization processes and interconnection between micelles.     

Synthesis and gelation properties of PEG-PLA-PEG triblock copolymers obtained by coupling monohydroxylated PEG-PLA with adipoyl chloride

Ring-opening polymerization of D,L-lactide was carried out in the presence of monohydroxylated poly(ethylene glycol) (PEG) with Mn of 2000 and 5000, using zinc powder as catalyst. The resulting PEG-b-polylactide (PEG-PLA) diblocks with various ethylene oxide/lactyl (EO/LA) ratios were coupled with adipoyl chloride to yield PEG-PLA-PEG triblock copolymers. N-Dimethylaminopyridine (DMAP) was used as catalyst. The obtained PEG-PLA-PEG triblock copolymers were characterized by various analytical techniques such as IR, 1H NMR, size exclusion chromatography, X-ray diffraction, and differential scanning calorimetry. Data showed that all the copolymers were semicrystalline with the PEG-type crystalline structure, the crystallinity decreasing with increasing PLA block length. Bioresorbable hydrogels were prepared from the water-soluble triblock copolymers. Rheological measurements showed a gel-sol transition with increasing temperature and gelation was found to be thermoreversible. The copolymer solution behaves like a viscoelastic liquid above the gel point and like a viscoelastic solid below the gel point. The critical gelation concentration, the gel-sol transition temperature at a given concentration, and corresponding moduli depend on both the EO/LA ratio and the molecular weight of the copolymers. It is assumed that gelation results from interactions between PEG blocks at low temperatures and that these interactions are disrupted as the temperature is elevated. The shrinking of PEG blocks with increasing temperature seems to be in agreement with the variation of the gel-sol transition temperatures.     

Microphase separation in thin films of supramolecular assemblies composed of a triblock copolymer and low-molecular-weight additive

The phase behavior of supramolecular assemblies (SMAs) formed by poly(4-vinylpyridine)-block-polystyrene-block-poly(4-vinylpyridine) (P4VP-b-PS-b-P4VP) triblock copolymer with 2-(4′-hydroxybenzeneazo)benzoic acid (HABA) was investigated with respect to the molar ratio (X) between HABA and 4VP monomer unit in bulk as well as in thin films. The results were compared with SMAs formed by a PS-b-P4VP diblock copolymer of similar composition as the triblock but half the molecular weight to ascertain the effect of molecular architecture on microphase separation. In bulk, both the di- and triblock SMAs showed composition-dependent morphological transitions, which could be tuned by HABA/4VP molar ratio. The domain spacing of the SMA was not significantly affected by the molecular architecture of the constituting block copolymers. In thin films also, both the di- and triblock SMAs showed more or less similar morphological transitions depending on X. Interestingly, the domain orientation of the cylindrical or lamellar microdomains in the SMAs was influenced by the molecular architecture of the block copolymer. After chloroform annealing, although the diblock SMAs showed in-plane orientation of the domains, triblock SMAs showed perpendicular domain orientation. The perpendicular orientation of the microdomains in triblock was favored because it allowed the mid-PS blocks to acquire normal distribution of loop and bridged conformations. Furthermore, the orientation of the lamellar and cylindrical microdomains of the diblock SMAs was found to switch to perpendicular orientation after annealing in 1,4-dioxane vapors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1594–1605, 2010     

Effects of block size of pluronic polymers on the water structure in the corona region and its effect on the electron transfer reactions

Effects of constituent block size of triblock copolymers on the nature of the water molecules in the corona region of their micelles have been investigated using time-resolved fluorescence measurements. The physical nature of the water molecules in the micellar corona region of the block copolymer, Pluronic F88 ([ethylene oxide (EO)]103-[propylene oxide (PO)]39-EO103), has been studied using a solubilized coumarin dye. Solvent reorientation time and rotational correlation time have been measured and compared with another block copolymer, Pluronic P123 (EO20-PO70-EO20), which has a different composition of the constituent PO and EO blocks. It is noted that due to the presence of larger number of EO blocks in F88 as compared with P123, the corona region of the former micelle is more hydrated than that of the latter. The solvent reorientation time and rotational correlation time are found to be relatively shorter for F88 as compared with P123. This indicates that the water molecules in the corona of the F88 micelle are more labile than those of P123, which is also supported from the estimated number of water molecules associated with each EO unit, measured from the size of each type of micelle and its aggregation number. To understand the effect of block size on the chemical reactions in these microheterogeneous media, electron transfer reactions have been carried out between different coumarin acceptors and N, N-dimethylaniline donor. The electron transfer results obtained in F88 micelles have been compared with those obtained in P123, and the results are rationalized on the basis of the relative hydration of the two triblock copolymer micelles.     

The solubilisation behaviour of some dichloroalkanes in aqueous solutions of PEO-PPO-PEO triblock copolymers: a dynamic light scattering, fluorescence spectroscopy, and SANS study

The aggregation behaviour of PEO-PPO-PEO triblock copolymers in water and in water + chlorinated additive mixtures was studied by means of fluorescence spectroscopy, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The copolymers were chosen such as to investigate the effects of molecular architecture (L35 and 10R5) and molecular weight by keeping constant the hydrophilic/hydrophobic balance (F88 and F108). 1,2-Dichloroethane was used as a prototype of water basins contaminants. The hydrodynamic radius of the block copolymer aggregates (R(h,M)) and the intensity ratio of pyrene of the first and the third vibrational band (I(1)/I(3)) were determined as a function of temperature (10-45 degrees C) and concentration. The copolymer architecture essentially does not affect R(h,M) in the entire range of temperature and concentration investigated. At a given temperature, increasing macromolecular size leads to a decrease of R(h,M). With rising temperature R(h,M) also decreases. According to the DLS results, the I(1)/I(3) change with temperature clearly detects the aggregation only for F88 and F108. The presence of 1,2-dichloroethane, at concentrations close to its solubility in water, does not lead to changes in the distribution of hydrodynamic radii for L35 and 10R5. Larger quantities of additive induce the formation of quite polydisperse mixed aggregates for L35 and of networks for 10R5. In the case of F88 and F108, low concentrations of additive lead to formation of mixed aggregates with smaller R(h,M). The SANS results corroborate the DLS and fluorescence findings proving enhancement of the copolymer aggregation through the presence of 1,2-dichloroethane. The DLS findings combined with those from the fluorescence spectroscopy provide some insight into the site of solubilisation of the additive in the aggregates.     

Local viscosity analysis of triblock copolymer micelle with cyanine dyes as a fluorescent probe

The local viscosity of Pluronic F127 triblock copolymer micelles in water was determined with cyanine dyes as fluorescent probes. These dyes show very weak fluorescence at a low temperature, but show enhanced fluorescence at a temperature higher than the critical micellization temperature (T(cm)). This is because a viscous environment within the micelle suppresses the formation of a nonradiative twisted intramolecular charge transfer (TICT) excited state of the dyes. The good correlation between the fluorescence quantum yields of the dyes and the viscosity and the temperature of the media allows a determination of local viscosity of micelle based on the fluorescence quantum yields. The local viscosity of both core and corona regions of micelles increases at >T(cm) and shows a maximum at a temperature 7-9 °C higher than T(cm), and decreases at higher temperature due to the increased fluidity. The core viscosity is larger than that of the corona, and the corona viscosity increases toward the micelle center. The polymer concentration has different effects on the core and corona viscosity: the corona viscosity increases with a polymer concentration increase at the entire temperature range, whereas the core viscosity increases only at a low temperature. The corona viscosity increase is due to the condensation of a large number of polyethylene oxide (PEO) blocks. In contrast, the dehydration degree of polypropylene oxide (PPO) blocks in the core scarcely changes, and the core has a similar composition regardless of polymer concentration. The larger polymer concentration promotes a micelle formation at lower temperature where the fluidity increase is very weak, resulting in larger core viscosity.     

Micellization in aqueous solution of an ethylene oxide-propylene oxide triblock copolymer, investigated with 1H NMR spectroscopy, pulsed-field gradient NMR, and NMR relaxation

(1)H nuclear magnetic resonance (NMR) spectroscopy has been applied to study the temperature and concentration-induced micellization of a poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) triblock copolymer, Pluronic P105, in D(2)O solutions in the temperature range from 5 to 45 degrees C and the concentration range from 0.01 to 15% (w/v). The intrinsic probes, the chemical shift, and the half-height width of the PO CH(3) signal are very sensitive to the local environment and can be used to characterize the temperature and concentration-dependent aggregation process. When the temperature approaches the critical micellization temperature or the polymer concentration reaches the critical micellization concentration, the chemical shift of the PO CH(3) signal moves toward lower ppm values and the half-height width of the PO CH(3) signal shows a sudden increase. It indicates that the methyl groups are experiencing a progressively less polar environment and transferring from water to the hydrophobic micellar core. The hydrodynamic radius of the unimers and the micelles are determined as be 1.8 and 5.0 nm by means of pulsed-field gradient spin-echo (PGSE) NMR. They were independent of temperature and concentration. The drastic shortening of spin-lattice relaxation time T(1) for the PO CH(3)/CH(2) protons in the transition region suggested that the PPO blocks are located in a "liquid-like" micellar core, whereas the exponential increase of T(1) for the PEO CH(2) protons implied that the PEO blocks are still keeping in contact with surrounding water. Thermodynamics analysis according to a closed association model shows that the micellization process is entropy-driven and has an endothermic micellization enthalpy.     

Two Gel States of a PEO‐PPO‐PEO Triblock Copolymer Formed by Different Mechanisms

Two gel states of a PEO‐PPO‐PEO (Pluronic P103) triblock copolymer in water are investigated using small‐angle X‐ray scattering, rheology and differential scanning calorimetry. The first gel state turns out to be the hexagonal microphase while the second gel state, showing turbidity change with four distinct regions, is somewhat disrupted. The second gel is moreover not thermoreversible as evidenced by rheology. Based upon the present study, two different gelation mechanisms for aqueous PEO‐PPO‐PEO solutions are proposed.     

Thermoresponsive triblock copolymer aggregates investigated by laser light scattering

Narrowly distributed polystyrene-b-poly(N-isopropylacrylamide)-b-polystyrene (PS-b-PNIPAM-b-PS) triblock copolymer with trithiocarbonate group in the middle of PNIPAM block was synthesized by using reversible addition fragmentation chain transfer (RAFT) polymerization. Such copolymer chains form a micelle-like aggregate with PNIPAM interlocking rings and associating PS blocks as the core and PNIPAM rings as the corona. The hydrolysis of the trithiocarbonate group leads the rings in the corona to be cut into open linear coils. Using laser light scattering, we have investigated the temperature-induced collapse of the aggregates with the rings and coils in the corona. Our results reveal that the former shrink much less than the latter due to the topological effect of PNIPAM blocks in the corona. On the other hand, the aggregates with long coils exhibit a sharper collapse transition than those with shorter coils.     

A thermoreversible ion gel by triblock copolymer self-assembly in an ionic liquid

A new thermoreversible ion gel with high ionic conductivity was developed through the self-assembly of a triblock copolymer, by choosing appropriate associating end-blocks for the ionic liquid.