Dispersive liquid-liquid microextraction method based on solidification of floating organic drop combined with gas chromatography with electron-capture or mass spectrometry detection

A simple dispersive liquid-liquid microextraction (DLLME) method based on solidification of a floating organic drop (DLLME-SFO) technique combined with gas chromatography/electron-capture detection (GC/ECD) or gas chromatography/mass spectrometry (GC/MS) has been developed. The proposed method is simple, low in cost, and of high precision. It overcomes the most important problem in DLLME, the high-toxic solvent used. Halogenated organic compounds (HOCs) in water samples were determined as the model compounds. The parameters optimized for the DLLME-SFO technique were as follows: A mixture of 0.5 mL acetone, containing 10 microL 2-dodecanol (2-DD-OH), was rapidly injected by syringe into the 5 mL water sample. After centrifugation, the fine 2-DD-OH droplets (8+/-0.5 microL) were floated at the top of the screwcap test tube. The test tube was then cooled in an ice bath. After 5 min the 2-DD-OH solvent had solidified and was then transferred into a conical vial; it melted quickly at room temperature and 3 microL (for GC/ECD) or 2 microL (for GC/MS) of it was injected into a gas chromatograph for analysis. The limit of detection (LOD) for this technique was 0.005-0.05microgL(-1) for GC/ECD and was 0.005-0.047 microgL(-1) for GC/MS, respectively. The linear range of the calibration curve of DLLME-SFO was from 0.01 to 500 microgL(-1) with a coefficient of estimation (r2)>0.996 for GC/ECD and was from 0.02 to 500 microgL(-1) with a coefficient of estimation (r2)>0.996 for GC/MS.     

Improved GC/ECNI-MS sensitivity of decabromodiphenyl ether determination on 30 m columns by increasing the carrier gas flow after a modified gel permeation chromatographic cleanup protocol employing cyclohexane/ethyl acetate as eluent

BDE-209 is the predominant constituent of the commercial mixture decabromodiphenyl ether which is used as brominated flame retardant (BFR). Owing to difficulties associated with the high mass (thermal instability and low vapour pressure), short GC columns (≤15?m) have been suggested for its analysis while longer columns (30–50?m) are suggested for other polybrominated diphenyl ether (PBDE) congeners. To overcome this considerable expenditure in the analysis of PBDEs, we aimed at increasing the sensitivity of BDE-209 analysis by gas chromatography coupled with electron-capture negative ion mass spectrometry (GC/ECNI-MS) on a 30?m column. The chromatographic performance of BDE-209 on the 30?m GC column was improved by increasing the carrier gas flow from initially 1.2?mL?min^?1 to 5 or 10?mL?min^?1 after the last octabromo diphenyl ether (Br₈DE) congener was eluted. With this high carrier gas flow, the column residence time of BDE-209 was shortened by ～25%, the peak height was increased and, consequently, the limit of detection by GC/ECNI-MS in selected ion monitoring (SIM) mode was improved. When this high-flow GC/ECNI-MS-SIM method was applied to a sediment sample, we realized that gel permeation chromatography (GPC) – used for the removal of lipids and/or sulphur – provided low recovery rates for BDE-209. The large molecule BDE-209 eluted late and only 50% was recovered by our previous standard protocol for polyhalogenated compounds. Application of a modified GPC procedure with a longer collection time increased the recovery of BDE-209 in the GPC step to ～90%.     

Chromatographic enrichment and enantiomer separation of axially chiral polybrominated biphenyls in a technical mixture

The separation properties of different chromatographic methods regarding the enantioselective separation of axially chiral (atropisomeric) polybrominated biphenyls (PBB) were studied. For this purpose, the technical hexabromobiphenyl product Firemaster BP-6 was characterised by gas-chromatography coupled to electron capture detection (GC/ECD) and electron-capture negative ion mass spectrometry (GC/ECNI-MS) as well as by liquid chromatographic fractionating on active carbon and celite. Twelve individual PBBs including potential atropisomeric PBBs were isolated from Firemaster BP-6 by reversed-phase high-performance liquid chromatography (HPLC) on three serially coupled octadecylsilane columns. Six of the 12 isolated PBBs (three tri-ortho and di-ortho substituted PBBs, respectively) were separated into atropisomers on a HPLC column containing permethylated beta-cyclodextrin on silica. Moreover, the temperature dependency of the enantiomer separations is discussed. Gas chromatographic enantiomer separation of PBBs is a very demanding task due to high elution temperatures. However, the atropisomers of one tri-ortho substituted PBB congener (PBB 149) could be resolved on a column coated with randomly modified heptakis(6-O-tert.-butyldimethylsilyl-2,3-di-O-methyl)-beta-cyclodextrin in OV 1701.     

Evaluation of three ionisation modes for the analysis of chlorinated paraffins by gas chromatography/ion-trap mass spectrometry

The applicability of three ionisation modes to the analysis of short-chain chlorinated paraffins (SCCPs) using gas chromatography coupled with mass spectrometry (GC/MS) was evaluated. MS conditions for electron ionisation (EI), positive chemical ionisation (PCI) and electron-capture negative ionisation (ECNI) were optimised using commercially available individual tetra-, penta- and hexachlorodecanes. In addition, mass spectra were studied and fragmentation pathways were proposed for each individual congener. Different fragment ions were evaluated for quantification, and ECNI-MS using [HCl2](-) and [Cl2](-*) ions was selected for the determination of SCCPs. Quality parameters (repeatability, limits of detection and calibration range) were established for the proposed method, which was then applied to the analysis of SCCPs in river sediments.     

Plasma quantification of quazepam and its 2-oxo and N-desmethyl metabolites by capillary gas chromatography

The authors have developed a gas chromatographic method for the simultaneous quantification of quazepam in plasma and its two main metabolites, 2-oxoquazepam and N-desmethylquazepam. This method involves an extraction from plasma using butyl acetate, and an analysis by electron-capture detection on a CP-Sil 5 WSCOT capillary column. Intra- and inter-day precision and accuracy were better than 10% for each of these three compounds, even near their detection limit estimated at 0.2 ng/ml. Linearity proved satisfactory between 0.2 and 60-70 ng/ml. For endogenous plasma components, adequate specificity was achieved. Despite some inconveniences, a long analysis time, a progressive saturation of the column owing to a low oven temperature, and a relatively short life-span of the CP-Sil 5 columns, this method was the only one available in the literature for the quantification of quazepam and its metabolites from the same plasma sample. It was successfully applied to phase I studies in healthy volunteers.     

Optimized pressure-pulse splitless injection and electron-capture, negative ionization detection for the congener specific determination of compounds of technical toxaphene

The goal of the study is the optimization of the congener specific determination of compounds of technical toxaphene (CTTs). For this reason GC/ECNI-MS and CTT standard mixtures are applied. The splitless injection is improved by pressure-pulse injection which yields significantly higher abundance of the CTTs than by the conventional constant flow injection technique. The abundance of low volatile CTTs like B9-1025 (Parlar #62) is increased by factor 3 or more. The pressure-pulse injection can easily be integrated in standard (constant flow splitless injection) methods without influencing the retention times and reproducibility. The GC oven program and the flow are optimized for the separation of CTTs on a non-polar CP-Sil 2 column. Problems caused by oxygen in the ion source are discussed.     

Enantioselective determination of the organochlorine pesticide bromocyclen in spiked fish tissue using solid-phase microextraction coupled to gas chromatography with ECD and ICP-MS detection

A method for enantioselective determination of bromocyclen enantiomers in fish tissue has been developed. The enantiomers were resolved by capillary gas chromatography (GC) using a commercial chiral column (CP-Chirasil-Dex CB) and a temperature program from 50 degrees C (held for 1 min), raised to 140 degrees C at 40 degrees C min(-1) and then raised at 0.2 degrees C min(-1) to 155 degrees C. This enantioselective gas chromatographic separation was combined with a clean-up/enrichment procedure based on solid-phase microextraction (SPME). Under SPME optimized conditions, precision, linearity range and detection limits of the developed SPME-enantioselective GC procedure were evaluated and compared using two different detection systems: a classical electron-capture detection (ECD) and an element specific detection using inductively coupled plasma mass spectrometry (ICP-MS). The SPME-GC-ECD method exhibited an excellent sensitivity, with detection limits of 0.2 ng L(-1) for each enantiomer of bromocyclen. Although ICP-MS offered poorer detection limits (7 ng L(-1) as Br, equivalent to 36 ng L(-1) of each enantiomer) than conventional ECD detector, it proved to be clearly superior in terms of selectivity. The relative potential and performance of the two compared methods for real-life analysis has been illustrated by the determination of enantiomers of bromocyclen in spiked tissue extracts of trout.     

Dual NPD/ECD detection in comprehensive two-dimensional gas chromatography for multiclass pesticide analysis

A comprehensive 2-D GC (GC x GC) dual detection system, coupled to nitrogen-phosphorus detection (NPD) and electron capture detection (ECD) has been developed for multiclass pesticide analysis in vegetable sample matrices. The second dimension column was connected to the parallel detectors via a microfluidic splitting device. The sample set comprised 17 organochlorine pesticides, 15 organophosphorus insecticides and 9 N-containing fungicides. Selective detection of vegetable sample extracts provides increased information content through simultaneous, correlated GC x GC plots for both ECD and NPD, which demonstrated improved separation of pesticide standards from each other, and from the sample matrix. The efficiency of NPD and ECD modes was investigated and compared; the ECD produced broader peaks, with the ECD generating greater response as measured by S/N ratio. Accuracy and precision of the approach were determined as repeatability and reproducibility for selected pesticides. The RSDs of the intraday (n = 5) and interday (3 days) analyses of the selected pesticides are less than 2.5 and 10%, respectively. The relative ratio of the ECD/NPD response is proposed to offer additional identification of individual pesticides, in addition to the (1)t(R) and (2)t(R) retention coordinates; ratios vary from 19 to over 1000 for selected pesticides that also exhibit ECD and NPD activities.     

Simultaneous determination of imazalil and its major metabolite in citrus fruit by solid-phase extraction and capillary gas chromatography with electron capture detection

A method was developed for the simultaneous determination of imazalil and its major metabolite, R 14821, in citrus fruit. This method (designated the SPE method) is based on solid-phase extraction (SPE) and capillary gas chromatography (GC) with electron-capture detection (ECD). The SPE method is highly sensitive for both compounds (limit of detection for each: 0.001 microg/g) and is less time consuming than the previously reported method based on repeated liquid-liquid partitioning and GC-ECD. Recoveries for 3 levels of fortification (0.02, 0.2, and 2.5 microg/g) from satsuma mandarins ranged from 94.3 to 96.5% for imazalil and from 93.9 to 96.3 % for R 14821, with coefficients of variation (CVs) ranging from 3.1 to 6.3% for imazalil and from 4.5 to 5.6% for R 14821. Average residual levels found in grapefruit, oranges, and lemons by the SPE method and the previously reported method, and the corresponding CVs, were similar.     

Comparative tests to improve the gas chromatographic analysis of chlorobornanes in fish samples

A comparison was made between electron capture negative ionization quadrupole mass spectrometry (ECNI-MS) and electron capture detection (ECD) with regard to repeatability and reproducibility for the gas chromatographic (GC) analysis of toxaphene congeners [chlorobornanes (CHBs)]. The tests, including standard solutions and several cleaned fish extracts, showed larger relative standard deviations (RSDs) for the repeatability of ECNI-MS but no differences in the reproducibility of the 2 techniques. The sensitivity of the GC-ECNI-MS was considerably better than that of GC/ECD. Four stepwise-designed comparative tests were also conducted on GC analysis, cleanup, and the complete method. The results showed that, according to the current state-of-the-art, coefficients of variation for the between-laboratory performance were not < 20% and were usually between 20 and 30%. In spite of separation problems, e.g., for CHB 26, which cannot be separated into a single-component peak, a 95% methyl 5% phenyl polysiloxane (CP Sil 8) column was preferred to more polar columns for the analysis of CHBs 26, 40, 41, 44, 50, and 62. CHB 62 was more difficult to determine than CHB 26 and 50. Addition of the CHBs 40, 41, and 44 to the standard set of 3 chlorobornanes (26, 50, and 62) resulted in more separation problems. A 3-step cleanup method was recommended.     

Determination of the enantiomer fraction of PBB 149 by gas chromatography/electron capture negative ionization tandem mass spectrometry in the selected reaction monitoring mode

Enantioselective determination of the atropisomers of 2,2',3,4',5',6-hexabromobiphenyl (PBB 149) in a purified sample from a bird egg was attempted in this work. By application of the classic method for PBB determination, i.e. gas chromatography coupled to electron capture negative ionization mass spectrometry (GC/ECNI-MS) using the bromide ions, the enantiomers interfered with another brominated compound. Subsequent measurements clarified that this interference did not occur in the mass chromatogram of the molecular ion of PBB 149. Therefore, a GC/ECNI tandem mass spectrometry (MS/MS) method was developed, based on the fragmentation of [M]-. A suitable precursor-product ion transition was found for m/z 627.5 --> 80 +/- 1.5, representing the most abundant ion trace of the molecular ion and the bromide ions. Optimization of the ion source temperature, the methane gas pressure, and the collision voltages resulted in a robust method that could solve the problem. Subsequent injections of a technical PBB product (Firemaster BP-6) resulted in the anticipated racemic proportion (enantiomer fraction (EF) = 0.50 +/- 0.02 (n = 8)). By contrast, the EF in the purified extract of a bird egg was found to be 0.42 +/- 0.02 (n = 10), indicative of a significant enantioenrichment of the second eluting atropisomer. Additional measurements were performed on a non-chiral column. These measurements allowed for the detection of 16 hexabromobiphenyls (hexa-BBs) in Firemaster BP-6. These comparisons verified that PBB 149 enantiomers did not interfere with an isomer that could falsify the enantiomer fraction in the sample. The novel method using GC/ECNI-MS/MS in the selected reaction monitoring (SRM) mode was eight times more sensitive than application of conventional GC/ECNI-MS selected ion monitoring (SIM) analysis of the molecular ion.     

Determination of pesticides in olives by gas chromatography using different detection systems

A multiresidue method has been developed and optimized for the quantitative analysis of 32 pesticides in olives. The extraction was based on homogenization with light petroleum using a high speed homogenizer. A gel permeation chromatography (GPC) clean-up process with ethyl acetate/cyclohexane (1:1) as mobile phase was applied to the extracts to separate the low-molecular mass pesticides from the high-molecular mass fat constituents of the oil. The target compounds were quantified in the final extract by gas chromatography (GC) using thermoionic specific detection (TSD) and electron-capture detection (ECD). In the case of positive samples, the amounts found were confirmed by GC-MS/MS. The obtained recovery (with mean values between 70 and 121, 71 and 114, and 82 and 134% for ECD, TSD and MS/MS systems, respectively) and RSD values (repeatability, n=10) below 16% in all cases confirm the usefulness of the proposed method for the analysis of this complex sample. Diuron, terbuthylazine and endosulfan sulfate were the most frequently detected residues in olive samples collected during the harvest 2004-2005. Finally, in order to know the proportion of pesticides that are transferred to the oil during olive oil production in olive mills, obtained results in some of the sampled olives applying the proposed method were compared to levels found in the corresponding olive oil, which was obtained by means of the Abencor method.     

Offline coupling of high-speed counter-current chromatography and gas chromatography/mass spectrometry generates a two-dimensional plot of toxaphene components

High-speed counter-current chromatography (HSCCC), a separation technique based solely on the partitioning of solutes between two immiscible liquid phases, was applied for the fractionation of technical toxaphene, an organochlorine pesticide which consists of a complex mixture of structurally closely related compounds. A solvent system (n-hexane/methanol/water 34:24:1, v/v/v) was developed which allowed to separate compounds of technical toxaphene (CTTs) with excellent retention of the stationary phase (S_f = 88%). Subsequent analysis of all HSCCC fractions by gas chromatography coupled to electron-capture negative ion mass spectrometry (GC/ECNI-MS) provided a wealth of information regarding separation characteristics of HSCCC and the composition of technical toxaphene. The visualization of the large amount of data obtained from the offline two-dimensional HSCCC–GC/ECNI-MS experiment was facilitated by the creation of a two-dimensional (2D) contour plot. The contour plot not only provided an excellent overview of the HSCCC separation progress, it also illustrated the differences in selectivity between HSCCC and GC. The results of this proof-of-concept study showed that the 2D chromatographic approach involving HSCCC facilitated the separation of CTTs that coelute in unidimensional GC. Furthermore, the creation of 2D contour plots may provide a useful means of enhancing data visualization for other offline two-dimensional separations.     

Determination of residues of endosulfan and five pyrethroid insecticides in virgin olive oil using gas chromatography with electron-capture detection

A simple, fast and economical method has been developed for the determination of endosulfan and five pyrethroid insecticides, cypermethrin, deltamethrin, fenvalerate, lambda-cyhalothrin and permethrin, in virgin olive oil. The method uses a Sep-Pak alumina-N column cleanup after a liquid-liquid extraction or low-temperature precipitation step, and gas chromatography (GC) with electron-capture detection. The matrix effect was assessed for the GC systems used. Recoveries were 71-91% with RSD values of 6-17%. The method was applied to 338 virgin olive oil samples for monitoring of residues of these pesticides. Cypermethrin and lambda-cyhalothrin were detected at the limit of quantification in one sample each, while 22% of samples contained endosulfan residues, mostly at very low levels ranging from 0.02 to 0.57 mg/kg.     

Application of polyphenylmethylsiloxane coated fiber for solid-phase microextraction combined with microwave-assisted extraction for the determination of organochlorine pesticides in Chinese teas

Polyphenylmethylsiloxane (PPMS) as a novel coating for solid-phase microextraction (SPME) combined with microwave-assisted extraction (MAE) has been applied to determine the concentrations of organochlorine pesticides (OCPs) in Chinese teas. The characteristics of PPMS fiber, the extraction modes of SPME, the extraction time, temperature, and salt effects were investigated. Microwave irradiation time and power were also studied. Compared with commercial polydimethylsiloxane (PDMS) fiber and homemade sol-gel polymethylsiloxane (PMS) fiber, the novel porous sol-gel PPMS fiber exhibited high sensitivity and selectivity for OCPs compounds, higher thermal stability (to 350 degrees C) and long service life (more than 150 times). The recoveries of MAE is compared with that of ultrasonic extraction (USE), MAE-SPME-gas chromatography (GC)/electron-capture detection (ECD) methods showed better results for Chinese teas. Linear ranges of OCPs in the blank green tea was 0.1-10(3) ng/l. Detection limits of this method are below 0.081 ng/l. Recoveries of this method are between 39.05 and 94.35%. The repeatability of the technique was less than 16% relative standard deviation (R.S.D.). The tested pesticides in three Chinese teas were at the ng/g level.     

Solid-phase microextraction of polychlorinated biphenyls

The extraction and analysis of 21 polychlorinated biphenyls (PCBs) ranging from di- to decachlorobiphenyls in ocean, wetland and leachate water samples were achieved using solid-phase microextraction (SPME) with a 100-μm poly(dimethylsiloxane) (PDMS) fiber and gas chromatography–electron-capture detection (GC–ECD). Severe carryover between samples (e.g., 20%) occurs on both stir bars and the SPME fibers demonstrating that it is important to use a new stir bar for each sample, as well as to perform SPME–GC blanks between samples to avoid quantitative errors. The equilibrium partitioning coefficients of individual PCB congeners between PDMS and water were found to be surprisingly different compared to their octanol–water partitioning coefficient (K_ow), demonstrating that K_ow cannot be used to estimate the partitioning behavior of PCBs in the SPME process. Using a 15-min SPME extraction, SPME analysis with GC–ECD was linear (r²≥0.97) from 5 pg/ml to the solubility limit of each congener. Concentrations in water samples obtained by 15-min SPME extractions compared favorably with those obtained by toluene extractions, demonstrating that SPME combined with GC is a useful technique for the rapid determination of PCBs in water samples.     

Versatile and fast gas chromatographic determination of frequently used brominated flame retardants in styrenic polymers

Two versatile and fast methods to identify and quantify brominated flame retardants (BrFRs) in styrenic polymers were developed. Gas chromatography/mass spectrometry (GC/MS) as well as gas chromatography with electron-capture detection (GC/ECD), both following ultrasonic-supported dissolution and precipitation (USDP), were applied. The substance range includes poly-brominated biphenyls (PBBs) and diphenyl ethers (PBDEs), as well as other commonly used flame retardants (FRs), including two phosphate-based flame retardants. The methods were verified using congener standards and flame-retardant polymer samples. Good recoveries were found. Overall run time for the analysis, including sample preparation, is less than 60min.     

气相色谱/电子捕获检测法测定键合态糖苷的研究

该文建立了GC/ECD法测定键合态糖苷的分析方法,采用N-甲基-双(三氟乙酰胺)(MBTFA)对目标物进行衍生,并优化了反应温度和时间.结果表明在60℃下反应50 min时,衍生效果最好.该衍生反应在产物中引入氟元素,可用GC/JECD法进行测定.以苯氧基葡萄糖苷为典型目标物进行线性研究,方法在0.05～200 mg/...     

Ion-trap tandem mass spectrometry-based analytical methodology for the determination of polychlorinated biphenyls in fish and shellfish. Performance comparison against electron-capture detection and high-resolution mass spectrometry detection

Optimization of the Varian Saturn 2200 ion-trap tandem mass spectrometry (IT-MS/MS) system and comparison of its data quality with two other detection methods [electron-capture detection (ECD) and high-resolution mass spectrometry (HRMS)] was pursued by measuring polychlorinated biphenyls (PCBs) levels in fish and shellfish samples. IT-MS/MS methodology provided limits of detection (LOD) comparable to those obtained by ECD but superior specificity for the detection of a selected number of 39 PCB native congeners and 9 (13)C-labelled PCB standards. The method detection limits (MDLs) established for IT-MS/MS ranged between 1.0 and 5.0 pg/g on a wet weight basis while those obtained by ECD and HRMS were 1.0-4.0 pg/g and 0.1-2.0 pg/g, respectively. Overall, the results obtained in the study demonstrate that gas chromatography (GC) combined with IT-MS/MS provide higher data quality than those achievable by GC-ECD. For this particular set of target analytes the specificity achievable with IT-MS/MS was comparable to that obtained by HRMS and both techniques provided comparable data in terms of accuracy and precision.     

Ultratrace analysis for trans,trans-muconic acid by electrophoric derivatization and capillary gas chromatography

A highly sensitive method is described for the determination of trans,trans-muconic acid (MA), a biomarker of benzene exposure. The method is based on the derivatization of MA with an electrophoric reagent, 2-(pentafluorophenoxy)ethyl-2-(piperidino)ethanesulfonate, using potassium carbonate and 18-crown-6 ether as reaction activators. The resulting pentafluorophenoxy derivative of MA was analyzed by capillary GC with an electron-capture detector (ECD). The lower quantitation limit of the method is attainable at 0.3 μM of MA with a detection limit of about 60 nM (S/N=3) (60 fmol per 1.0 μl injection). Application of the method to the analysis of MA in urine proved feasible.