单核、对称双核钌配合物在铂电极上的电化学行为

利用循环伏安、循环交流伏安和微分电容测定等电化学方法研究了由2,2'-联吡啶(bpy)和桥联配体1,4-二(2-咪唑并[4,5-f][1,10]邻菲咯啉)苯(DIPB)配位而成的单核钌配合物[Rul:Ru(bpy)~2(DIPB)(ClO~4)~2]和对称双核钌配合物[Ru2:(bpy)~2Ru(DIPB)Ru(bpy)~2(ClO~4)~4]在铂电极上的电化学行为。研究结果表明,在0.1mol/L高氯酸四丁基铵(TBAP)的乙腈溶液中,这两种配合物的中心钌离子在铂电极上均呈现一对氧化还原峰,而配体2,2'-联吡啶则呈现两对氧化还原峰。单核Ru1和双核Ru2所对应的各组氧化还原峰分别符合可逆的单电子和二电子传递反应过程的特征,所对应的条件电位(FormalPotential)Ru2较ru1有轻微正移。Ru1和Ru2所对应的配位阳孩子的扩散系数分别为9.93×10^-^6cm^2/s和3.50×10^-^6cm^2/s。在循环交流法和微分电容法确定的时间量程内,两中心钌离子在桥联配体间的电子传递过程较它与电极间的慢。     

富勒烯系列配合物η2-C60[Ru(NO)(PPh3)]n的合成与光电性能

合成了一系列新的富勒烯钌配合物.通过元素分析、紫外-可见光谱、红外光谱、光电子能谱(XPS)和13C及31PNMR等多种手段对它们进行了表征.结果表明.该系列配合物分子内存在超共轭效应,共轭电子多.离域性好.通过光伏效应装置研究了它们的光电性能,结果显示该系列配合物具有良好的光电性能.     

[η~5:σ-Me_2C(C_5H_4)(C_2B_(10)H_(10))]Ru(NCCH_3)_2与中间炔的反应——钌环丁二烯和钌杂环戊三烯配合物的合成与结构

钌可以促使炔烃通过亚乙烯基钌卡宾金属配合物或钌金属杂环配合物的形式发生碳-碳偶联反应,它的化学性质很大程度上取决于配体的电子和立体特征.普通环戊二烯基钌配合物可以促使炔烃三聚生成苯环衍生物或使两分子炔烃和一分子含C=X键(X=C,O,S,N等)的不饱和底物发生环加成反应得到杂环化合物.含桥联碳硼烷-环戊二烯基配体的钌乙腈配合物[η5:σ-Me2C(C5H4)(C2B10H10)]Ru(NCCH3)2(1)表现出与环戊二烯基钌不同的反应性质.例如,配合物1与三甲基硅基取代的端炔或中间炔反应可生成含有单或双亚乙烯基有机钌卡宾配合物;与末端芳炔则通过三分子炔和桥联配体中的环戊二烯基发生加成反应得到含有独特三环结构的有机钌配合物.以上结果表明,配体的位阻效应和炔烃的种类都可以影响产物的类型.本文进一步研究了此钌乙腈配合物1与烷基或芳基取代的中间炔及中间二炔的反应.配合物1与3-己炔或二苯乙炔在甲苯中于80℃反应可以生成对空气和水稳定的η4-钌-环丁二烯配合物[η5:σ-Me2C(C5H4)(C2B10H10)]Ru(η4-C4Et4)(2)或[η5:σ-Me2C(C5H4)(C2B10H10)]Ru(η4-C4Ph4...     

石墨烯分散液及其组装膜的性能

通过对比表面活性剂十二烷基硫酸钠(SDS)和聚乙烯醇(PVA)对石墨烯的分散能力,发现SDS可有效避免石墨烯片层之间的团聚,使得石墨烯在水溶液中分散得更加均匀.将浓度分别为0.39和0.30 mg/m L的石墨烯(G)和石墨烯片(GF)的SDS分散液旋涂在ITO电极表面制备出G膜和GF膜.透射电子显微镜和原子力显微镜观测结果表明,两类石墨烯膜均呈现出纱状透明的片状结构,同时具有石墨烯特有的褶皱.在石墨烯膜上继续进行钌配合物分子膜的自组装实验,得到G/Ru复合膜和GF/Ru复合膜.采用循环伏安法及紫外-可见吸收光谱法对石墨烯复合膜进行光电化学分析,结果表明石墨烯膜与钌配合物分子膜的复合可有效加强薄膜对太阳光的吸收.     

含磺基苯甲酸及联吡啶钌配合物的合成、结构和催化苯甲硫醚氧化研究

利用水热方法合成了一个三联吡啶钌磺基苯甲酸配合物,[Ru(2,2′-bipy)3](3-Hsb)(3-sb).5H2O(1)(2,2′-bipy为2,2′-联吡啶;3-sb2-为3-磺基苯甲酸根离子),对配合物进行了元素分析、红外、紫外、荧光和差热热重表征,解析了配合物的晶体结构。晶体结构解析表明:配合物1是阴离子-阳离子型化合物,阴离子与水分子形成三维有孔洞的氢键网络,阳离子占据这些孔洞。电化学性质测试表明:氧化还原是一个单电子可逆的过程,对应的可逆对为Ru(Ⅳ)/Ru(Ⅲ),E1/2=1.350 V。室温苯甲硫醚氧化催化实验表明:钌配合物与酸结合具有较高的催化活性与亚砜选择性。     

多吡啶钌(Ⅱ)配合物化学发光性质研究

详细研究了Ru(bpy)3^2+,Ru(bpy)2(dppx)^2+,Ru(bpy)2(dppz)^2+,Ru(phen)3^2+,Ru(phen)2(dppx)^2+和Ru(phen)2(dppz)^2+六个多吡啶钌(Ⅱ)配合物的化学发光性质,筛选出Ru(bpy)3^2+和Ru(phen)3^2+两种性能优良的化学发光试剂;并探讨了它们发光的可能机理和影响因素,为钌(Ⅱ)配合物在化学发光分析中的应用提供了可供参考的理论依据。     

线型1,2-邻二萘醌-1-肟(1-nqo)钌配合物的合成

报道了含C_(16)长碳链线型1,2-邻二萘醌-1-肟(1-nqo)钌配合物trans-，cis- 及cis-，cis-[Ru(1-nqo)_2(CO)(spy)] (3)及(4)含C_(18)长碳链线型1-nqo钌配合 物cis-，cis-[Ru(1-nqo)_2(CO)(opy)] (5)，trans-，trans-[Ru(1-nqo)_2(opy) _2] (6)的合成。利用红外、FAB质谱、核磁共振氢谱及紫外-可见吸收光谱表征配 合物的结构，利用~1H-~1H偶合二维核磁技术对核磁共振峰进行指认。     

高比容量二氧化钌电极材料制备

以无定型Ru O2·x H2O和金属Ru粉末为反应物,采用高温固相反应制备了Na型层状氧化钌(NaRu O2),通过离子交换反应对Na-Ru O2实现了剥离,得到了氧化钌纳米层胶体分散液。将氧化钌纳米层分散液冷冻干燥处理后得到了氧化钌重组物(ERRu O2)。通过XRD和SEM对制备试样进行了分析表征。电化学测试结果表明,在0.5 mol L-1H2SO4水溶液中,当电流密度为0.25 A g-1时,ERRu O2电极比电容高达645 F g-1,远远高于前驱体Ru O2·x H2O的比电容(367 F·g-1),并且ERRu O2电极表现出与前驱物相似的循环稳定性,是一种性能优异的超级电容器电极材料。     

含磺基苯甲酸及联吡啶钌配合物的合成、结构和催化苯甲硫醚氧化研究

利用水热方法合成了一个三联吡啶钌磺基苯甲酸配合物, [Ru(2, 2′-bipy)₃](3-Hsb)(3-sb)·5H₂O (1)(2, 2′-bipy为2, 2′-联吡啶;3-sb^2-为3-磺基苯甲酸根离子), 对配合物进行了元素分析、红外、紫外、荧光和差热热重表征, 解析了配合物的晶体结构。晶体结构解析表明:配合物1是阴离子-阳离子型化合物, 阴离子与水分子形成三维有孔洞的氢键网络, 阳离子占据这些孔洞。电化学性质测试表明:氧化还原是一个单电子可逆的过程, 对应的可逆对为Ru(Ⅳ)/Ru(Ⅲ), E_1/2=1.350 V。室温苯甲硫醚氧化催化实验表明:钌配合物与酸结合具有较高的催化活性与亚砜选择性。     

新型2-取代苯基-1H-咪唑[4,5-f][1,10]邻菲啰啉基Ru(II)配合物的光电性质

为获取具有活性官能团的接枝型、高性能荧光传感配合物,合成了2-(4-氨基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-NH2)、2-(4-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-OH)、2-(4-羧基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-COOH)和2-(4-硝基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(CImPB-NO2)四种配体,借助紫外-可见(UV-Vis)吸收光谱、荧光(PL)光谱、循环伏安法(CV)和含时密度泛函理论(TD-DFT)对上述四种配体与过渡金属元素钌(Ru)所形成的配合物的光电性能进行研究.结果表明:四种配合物均在可见光区域有较强吸收,发光范围覆盖绿色到红色光波段.在极性溶剂N,N-二甲基甲酰胺(DMF)中,以2-(4-氨基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉为配体所构建的钌配合物([Ru(CImPB-NH2)(bpy)2]2+的荧光量子产率(Φ)较不含咪唑环的5-氨基邻菲啰啉合钌([Ru(phen-NH2)(bpy)2]2+)的提高了67%,以2-(4-羧基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉所构建的钌配合物([Ru(CImPB-COOH)(bpy)2]2+)的Φ可达29.8%,是[Ru(phen-NH2)(bpy)2]2+的18倍.理论计算表明:配体中取代苯环、咪唑环和邻菲啰啉的稠环共平面,形成共价大π体系,其有效共轭长度较邻菲啰啉母体有显著增加,配合物是以Ru为中心的近似八面体构型,理论计算的电子吸收光谱和跃迁性质与实验结果相一致.上述研究有可能为接枝型、高性能荧光传感配合物的设计和筛选提供实验依据.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Studies of Photoionization of CF3 I by Femtosecond Time-resolved Mass Spectrometry

The multi-photon dissociative photoionization dynamics of CF3I has been studied with femtosecond two-color pump-probe time of flight mass spectra at a pump pulse of 265 nm and a probe pulse of 398 nm. The life constants of CF3I+ and its fragment ions CF3+ and I+ are obtained as (96±7), (198±130) and (167±6)fs, respectively. The multi-photon dynamics leading to these ions differ. CF3I+ corresponds to a (1+2′) transition with one-photon pump excitation to the A band of CF3I. CF3+ are mainly formed by a tow-photon probe excitation to the CF3+ with subsequent dissociation of parent ions. I+ are produced in (2+2′) combined with (1+1′+2′) process. The results provide information on the multi-photon pathways involved.