Dispersive Solid-Phase Extraction of Rhodium from Water,Street Dust,and Catalytic Converters Using a Cellulose–Graphite Oxide Composite

A cellulose–graphite oxide composite was synthesized and characterized as an adsorbent for dispersive solid-phase extraction of rhodium from various samples before atomic absorption detection. The pH, adsorbent volume, centrifugation time and rate, eluent concentration, volume and type, adsorption and elution contact time, sample volume, and matrix interferences were optimized. The developed method is simple, rapid, and inexpensive. The tolerance limits for rhodium were 10,000?mg?L^?1 sodium, 25,000?mg?L^?1 potassium, 10,000?mg?L^?1 magnesium, and 20,000?mg?L^?1 calcium. The recovery for rhodium exceeded 95%. Elution was performed with 10?mL of 2.5?mol?L^?1 H₂SO₄. The adsorption and elution contact times were 30 and 60?s, respectively. The detection limit of the method for rhodium was 5.4?µg?L^?1 and the precision as the relative standard deviation was 1.6%. A certified reference material 2556 (used auto catalyst pellets) and fortified samples were analyzed to evaluate the accuracy of the method. The optimized method was used for the preconcentration of rhodium from tap water, well water, wastewater, seawater, catalytic converters, and street dust.     

Synthesis of molecularly imprinted polypyrrole as an adsorbent for solid‐phase extraction of warfarin from human plasma and urine

The aim of this work was to develop a method for the clean‐up and preconcentration of warfarin from biological sample employing a new molecularly imprinted polymer (MIP) as a selective adsorbent for solid‐phase extraction (SPE). This MIP was synthesized using warfarin as a template, pyrrole as a functional monomer and vinyl triethoxysilane as a cross‐linker. The molar ratio of 1:4:20 (template–functional monomer–cross‐linker) showed the best results. Nonimprinted polymers (NIPs) were prepared and treated with the same method, but in the absence of warfarin. The prepared polymer was characterized by Fourier transmission infrared spectrometry and scanning electron microscopy. An adsorption process (SPE) for the removal of warfarin using the fabricated MIPs and NIPs was evaluated under various conditions. Effective parameters on warfarin extraction, for example, type and volume of elution solvent, pH of sample solution, breakthrough volume and maximum loading capacity, were studied. The limits of detection were in the range of 0.0035–0.0050 µg mL^?1. Linearity of the method was determined in the range of 0.0165–10.0000 µg mL^?1 for plasma and 0.0115–10.0000 µg mL^?1 for urine with coefficients of determination (R²) ranging from 0.9975 to 0.9985. The recoveries for plasma and urine samples were >95%. Copyright © 2015 John Wiley & Sons, Ltd.     

LC–MS–MS Determination of Rotenone, Deguelin, and Rotenolone in Human Serum

For the first time we report a rapid and sensitive LC–MS–MS method for quantification of rotenone, deguelin, and rotenolone in human serum. The analytical procedure involves extraction with ethyl acetate without further clean-up. The active ingredients were separated on a C₈ reversed-phase column by isocratic elution. Eleven simultaneous transitions of precursor ions were monitored. Excellent selectivity and sensitivity enables quantification and identification of low levels of rotenoids (LOD 2 ng mL^?1, LOQ 5 ng mL^?1) in human serum.     

Preconcentration of Nicotinamide Using Molecularly Imprinted Microspheres for Solid-phase Extraction with Determination by High-performance Liquid Chromatography

The determination of target molecules in complicated matrices such as biological samples is largely dependent on sample pretreatment. Molecularly imprinted solid-phase extraction (SPE), using molecularly imprinted polymers as the adsorbent, has been demonstrated to be effective for the selective enrichment of target molecules in biological samples. In this study, molecularly imprinted polymeric microspheres were fabricated by two-step swelling polymerization using polystyrene particles as seeds, nicotinamide as the template, methacrylic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linker. The molecularly imprinted polymeric microspheres were packed into empty SPE cartridges, and the spiked urine and serum samples were loaded separately. After an initial washing and elution step, the effluents were analyzed by high-performance liquid chromatography (HPLC) using 1:9 methanol/0.05% phosphoric acid. The obtained molecularly imprinted polymeric microspheres were uniform, and the spherical particles were well distributed. The established method was validated, and the results showed that the method was linear from 0.499 to 19.96?µg?mL^?1. The limits of detection and quantification for nicotinamide were 0.3 and 0.9?µg?mL^?1, respectively. The relative standard deviations were 1.55 and 2.86% in urine and serum, respectively. The spiked recoveries of nicotinamide were 86.0–98.8% and 87.0–96.8% in urine and serum, respectively. The molecularly imprinted SPE and HPLC methods in this study are useful for the pretreatment and determination of the target compounds in these matrices.     

Synthesis of core–shell magnetic ion-imprinted polymer nanospheres for selective solid-phase extraction of Pb2+ from biological,food, and wastewater samples

Magnetic ion-imprinted polymer nanospheres, which have core–shell structures, have been synthesized as an adsorbent for extraction of Pb²⁺ from real samples prior to its flame atomic absorption spectrometric determination. The prepared adsorbent has been characterized using XRD, VSM, TEM, and FTIR measurements. The optimization results revealed that the adsorbent exhibited high selectivity toward Pb²⁺ over other cations such as Cu²⁺ and Zn²⁺. In addition, the removal efficiency of synthesized adsorbent was considerable (q_m?=?171.42?mg g^?1), its calibration curve was linear (0.5?850.0?ng mL^?1), and detection limit was 0.01?ng mL^?1. These results suggested that the prepared nanoadsorbent is an ideal candidate for solid-phase extraction of Pb²⁺ ions.     

Porous carbon derived from a metal–organic framework as an efficient adsorbent for the solid‐phase extraction of phthalate esters

A porous carbon designated as MOF‐5‐C was prepared by directly carbonizing a metal–organic framework (MOF‐5). The morphology and microstructure of MOF‐5‐C were characterized by scanning electron microscopy, N₂ adsorption, and powder X‐ray diffraction. The MOF‐5‐C retained the original porous structures of MOF‐5, and showed a high Brunauer–Emmett–Teller surface area (1808 m² g^?1) and large pore volume (3.05 cm³ g^?1). To evaluate its adsorption performance, the MOF‐5‐C was used as an adsorbent for the solid‐phase extraction of four phthalate esters from bottled water, peach juice, and soft drink samples followed by high‐performance liquid chromatographic analysis. Several parameters that could affect the extraction efficiencies were investigated. Under the optimum conditions, a good linearity was achieved in the concentration range of 0.1–50.0 ng mL^?1 for bottled water sample and 0.2–50.0 ng mL^?1 for peach juice and soft drink samples. The limits of detection of the method (S/N = 3) were 0.02 ng mL^?1 for bottled water sample, and 0.04–0.05 ng mL^?1 for peach juice and soft drink samples. The results indicated that the MOF‐5‐C exhibited an excellent adsorption capability for trace levels of phthalate esters, and it could be a promising adsorbent for the preconcentration of other organic compounds.     

Solid phase extraction of trace amounts of silver (I) using dithizone-immobilized alumina-coated magnetite nanoparticles prior to determination by flame atomic absorption spectrometry

A new, simple, fast and reliable solid-phase extraction (SPE) method has been developed to separation/preconcentration of trace amounts of silver ion from environmental water samples using dithizone/sodium dodecyl sulfate immobilized on alumina-coated magnetite nanoparticles (DTZ/SDS-ACMNPs) and its determination by flame atomic absorption spectrometry. The coating of alumina on Fe₃O₄ NPs not only avoids the dissolving of Fe₃O₄ NPs in acidic solution, but also extends their application without sacrificing their unique magnetization characteristics. This method avoided the time-consuming column-passing process of loading large volume samples in traditional SPE through the rapid isolation of DTZ/SDS-ACMNPs with an adscititious magnet. Optimal experimental conditions including amount of DTZ/SDS, pH value, standing time, sample volume, type, volume and concentration of eluent and co-existing ions have been studied and established. Under the optimal experimental conditions, the detection limit for Ag(I) with enrichment factors of 100 was found to be 0.52?ng?mL^?1 and its relative standard deviations (RSD) was 3.4% (n?=?10, C?=?5.0?µg?mL^?1). The linear range of calibration curve for Ag(I) was 2–5000?ng?mL^?1 with a correlation coefficient of 0.9991. The proposed method was successfully applied to the determination of target analyte in different water and wastewater samples. The validity of the method has been checked by applying it to study the recovery of silver ion in spiked water and wastewater samples.     

Preconcentration of trace aluminum (III) ion using a nanometer-sized TiO2-silica composite modified with 4-aminophenylarsonic acid, and its determination by ICP-OES

We describe a nanometer sized composite material made from titanium dioxide and silica that was chemically modified with 4-aminophenylarsonic acid and used for selective solid-phase extraction, separation and preconcentration of of aluminum(III) prior to its determination by ICP-OES. Under optimized conditions, the static adsorption capacity is 56.58?mg?g^?1, the enrichment factor is 150, the relative standard deviation is 1.6% (for n?=?11), and the detection limit (3?s) is 60?pg?mL^?1. The method was validated by analyzing the reference materials GBW 09101 (hair) and GBW 10024 (scallop) and successfully applied to the determination of trace Al(III) in spiked water samples and human urine, with recoveries ranging from 96% to 101%.

Magnetic nanofibrous polyaniline nanocomposite for solid-phase extraction of naproxen from biological samples prior to its spectrofluorimetric determination

Nanofibrous polyaniline–magnetite (PANI/Fe₃O₄) nanocomposite was in situ prepared through adsorption of magnetite nanoparticles onto PANI nanofibers surface and utilized as an efficient sorbent for magnetic solid-phase extraction of naproxen from water and biological samples, followed a desorption step and spectrofluorimetric determination. Field-emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, thermal gravimetric analysis and X-ray diffraction techniques were employed for characterization of the prepared nanocomposite. The important parameters influencing the extraction efficiency including PANI/Fe₃O₄ mass ratio, adsorbent dose, extraction time, sample solution pH, ionic strength, type and volume of desorption solvent and the elution time were studied and optimized. The investigated nanocomposite was successfully applied to the extraction of naproxen in spiked tap water, urine and plasma samples, with a relative recovery in the range of 90–98%. The reusability of PANI/Fe₃O₄ was examined for ten successive cycles, and the results confirm that the efficiency did not change significantly. A linear calibration plot was obtained in the range of 40–1000 ng mL^?1 with a limit of detection about 17 ng mL^?1 under the optimum conditions. The relative standard deviation (RSD) was found to be 2.34% (n = 8, concentration level of 100 ng mL^?1). The kinetics and thermodynamics of the extraction process were also studied.     

Determination of Tetracycline in Water and Honey by Iron(II,III)/Aptamer-Based Magnetic Solid-Phase Extraction with High-Performance Liquid Chromatography Analysis

A novel aptamer-based adsorbent was prepared for the magnetic solid-phase extraction of tetracycline. The Fe₃O₄/aptamer adsorbent was fabricated by immobilizing an aptamer on the surface of Fe₃O₄ magnetic nanoparticles by the reaction between avidin and biotin. The parameters affecting the isolation efficiency such as the pH, extraction time, extraction temperature, eluent, and elution time were investigated in detail. Under the optimal conditions, a linear relationship between the peak area and the concentration of tetracycline was observed in the range from 10.0 to 3000.0?µg L^?1 with a correlation coefficient of 0.9985 and a limit of detection of 2.5?µg L^?1. The developed method was successfully employed for the determination of tetracycline in honey and water samples with recovery values from 82.9 to 107.3% and relative standard deviations less than 7.6%. Compared with previously reported methods for the determination of tetracycline, the proposed protocol provides improvements in the limit of detection and specificity with reduced consumption of adsorbent and organic solvents.     

Determination of atorvastatin in human plasma by magnetic solid-phase extraction combined with HPLC and application to a pharmacokinetic study

A simple and sensitive analytical procedure by solid-phase extraction method combined with high-performance liquid chromatography and using of graphene–magnetite nanomaterials as sorbent has been developed for the determination of atorvastatin in human plasma. A magnetic solid-phase extraction method as a simple, fast, and efficient extraction technique has been used for sample preparation. A solid nanocomposite material, graphene nanosheets decorated with magnetite nanoparticles, was used as a magnetic adsorbent and the adsorption process was optimized in this study. RP C18 column was used with mobile phase composed of acetonitrile–10?mM orthophosphoric acid by isocratic elution with the flow rate of 1?mL?min^?1. Fluorimetric detection was used by the excitation wavelength at 282?nm and the emission wavelength at 400?nm. It was found that the calibration curve was linear in the 30–150?ng?mL^?1. Limit of detection and limit of quantitation values were found to be 10 and 30?ng?mL^?1, respectively. The intra-day and inter-day relative standard deviation values were less than 5.27%. It has been concluded that the new developed method provides fast, simple, cost reduced, and sensitive assay for atorvastatin determination in human plasma. This method is also applied to a pharmacokinetic study.     

Amoxicillin removal from aqueous matrices by sorption with almond shell ashes

The adsorption of the antibiotic amoxicillin at low concentration levels (µg?L^?1 order) from aqueous solution on almond shell ashes has been investigated, either by kinetic or equilibrium assays. The effect of the adsorbent amount, initial concentration of the antibiotic, particle diameter (d_p) and temperature were considered to evaluate the adsorption capacity of the adsorbent. The results showed that amoxicillin sorption is dependent on these four factors. The adsorption process was relatively fast and equilibrium was established in about 12 hours. The optimum parameters for an initial concentration of 450?µg?L^?1 were 50?mg of adsorbent, 303?K and d_p?<?600?µm. A comparison of kinetic models showed that pseudo-second order kinetics provides the best correlation of the experimental data. Isotherm data adjusted better to Langmuir equation, with an adsorption capacity of 2.5?±?0.1?mg?g^?1 at 303?K. The desorption process was also evaluated (maximum efficiency of 5%). Thermodynamic parameters were calculated and the negative value of ΔH⁰ and ΔG⁰ showed that adsorption was exothermic and a spontaneous process.     

HPLC determination of domoic acid in shellfish based on magnetic molecularly imprinting polymers

A magnetic molecularly imprinting polymer for domoic acid was fabricated. Synthesis conditions were optimized. The polymer particles have high magnetization for rapid magnetic separation. The apparent maximum absorption amount and dissociation constant of the polymer were 1,600?µg?g^?1 and 20.6?µg?mL^?1, respectively. The polymer retained 90% of adsorption amount after 5 times of repeated use. It was used as an adsorbent for purification and HPLC detection of domoic acid in shellfish with a detection limit of 0.050?µg?g^?1. Thus, the polymer could be applied to the sample pretreatment of aquatic products.     

Application of modified multiwalled carbon nanotubes for palladium preconcentration and determination in water and soil samples by flame atomic absorption spectrometry

A new solid-phase extraction method for determination of palladium by atomic absorption spectrometry is described. Multiwalled carbon nanotube (MWCNT) modified with 1-butyl 3-methyl imidazolium hexafluorophosphate (MWCNT-[BMIM]PF₆) and supported on sawdust was used as an adsorbent for preconcentration of palladium. Palladium ions are retained on (MWCNT-[BMIM]PF₆) adsorbent as [PdI₄]^2? and eluted from the column with a thiosulfate–ammonia mixture. The optimum conditions for the adsorption were evaluated by changing various parameters such as pH, sample volume, concentration and volume of eluent, iodide concentration and interfering ions to achieve highest sensitivity and selectivity. The calibration graph was linear in the range of 2–120 ng mL^?1 of palladium in the initial solution and the limit of detection based on 3S_b was 0.41 ng mL^?1. The method was applied to the determination of palladium in water, wastewater and soil samples.     

Polythionine-decorated magnetic nanoparticles as a robust and highly effective sorbent for mercury determination in environmental water samples

Extraction, pre-concentration and determination of trace amounts of mercury ions from water samples were investigated by magnetic solid phase extraction (MSPE) method using Fe₃O₄ nanoparticles decorated with polythionine as an adsorbent. A simple chemical synthesis by catalytic reaction of thionine in the presence of FeCl₃ and hydrogen peroxide was used for preparation of the magnetic sorbent. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometer analysis and Fourier transform infrared spectroscopy were used to characterise the adsorbent. Mercury ions were determined by cold vapour atomic absorption spectrometry. The parameters for MSPE procedure, such as pH of the extraction solution, adsorption time, weight adsorbent, elution conditions (type, concentration and volume of the eluent), volume of the sample solution and effects of coexisting ions were investigated. The obtained optimal conditions were: sample pH of 4; sorbent amount of 4 mg; sorption time of 20 min; elution solvent of HNO₃ (0.3 mol L^?1)/thiourea (2% w/v) with volume of 2 mL, and breakthrough volume of 400 mL. A good linearity in the concentration range of 0.025–40 µg L^?1 (R² > 0.999) with the pre-concentration factor of 198 was obtained. The limits of detection and quantification were achieved as 0.008 and 0.025 µg L^?1, respectively. Furthermore, sea and river water samples were analysed and good recoveries (97.1–99.6%) were obtained.     

Determination of Aristocularine Enantiomers by Dispersive Liquid–Liquid Microextraction and Chiral High-performance Liquid Chromatography

Here is reported a novel analytical approach for the extractive separation and determination of enantiomeric ratios of aristocularine in bovine serum albumin. The results demonstrate suitable analytical performances. The separation was performed by chiral high-performance liquid chromatography with a 5-µm column using a mobile phase of 1:1 n-hexane:ethanol at a flow rate of 0.7?mL?min^?1 with ultraviolet–visible absorption, circular dichroism, and polarimetric detection. The enantiomers were eluted at 13.2 and 15.6?min for (+) and (?)-aristocularine, with a resolution of 1.58 and a separation factor of 1.27. The analytical parameters for the dispersive liquid–liquid microextraction were optimized; under these conditions, the extraction recoveries were from 88.6% to 93.9% for a two-step extraction. The precision, reported as the percent relative standard deviation, had values from 2.9% to 3.2% for 0.5?µg?mL^?1 of analyte for five replicate measurements using ultraviolet–visible absorption and circular dichroism detection. The limits of detection were between 0.05 and 0.08?µg?mL^?1 with enrichment ratios up to a value of 12.     

A sensitive RP-HPLC method for estimation of artemether from polymeric nanoparticles after pre-column acid treatment using UV-visible detector

Abstract

Artemether; a sesquiterpene lactone is widely used for the treatment of malaria as artemisinin-based combination therapy (ACT). The present work involves the development and validation of sensitive reversed-phase high-performance liquid chromatography (RP-HPLC) method for quantification of artemether (ART) in polymeric nanoparticles. ART was transformed to α, β-unsaturated decalones by pre-column acid treatment to enhance the sensitivity of chromophoric group lacking ART for quantification by HPLC-UV. Waters Spherisorb^® 5?µm ODS(C18) column (4.6*250?mm) with gradient elution by mobile phase comprising of ACN and PBS (10?mM; pH 6.0) was used to separate acid-treated ART. The analysis was carried at λ_max of 253?nm with 20?min and 20?µL run time and injection volume, respectively. The method was found to be linear in the concentration range of 0.5–10?µg mL^?1 with 0.09?µg mL^?1 and 0.27?µg mL^?1 as LOD and LOQ respectively. Further, the method was also found to be specific for ART in presence of blank polymeric nanoparticles, accurate (% average recovery rate 101.7?±?1.68%), precise (RSD <2%), and robust. The method was successfully used to determine % entrapment efficiency and in vitro release of ART-loaded polymeric nanoparticles with HPLC using a UV-visible detector.     

Separation and determination of selected psychotropic drugs in human serum by SPE/HPLC/DAD on C18 and Polar-RP columns

A simple and sensitive high-performance liquid chromatographic method with diode array detection is described for the quantification of some psychotropic drugs: fluoxetine, sertraline, alprazolam, perphenazine, zolpidem, and hydroxyzine in fortified human serum samples. The test compounds were extracted from human serum by solid-phase extraction using C18 extraction column and injected into C18 or Polar-RP analytical columns for separation. A mobile phase was composed of methanol, water, acetate buffer at pH 3.5, and diethylamine. The method was validated for the concentration range 0.4–5?µg?mL^?1 for zolpidem and 0.5–6?µg?mL^?1 for other drugs. Mean recoveries were from 87.79% to 107.94% with adequate precision (% RSD ≤2.1%). The full separation of all investigated drugs, good peaks’ symmetry, and simultaneously high system efficiency were obtained on Polar-RP column, which was used for the first time to analyze these drugs. System efficiency obtained on the column was significantly higher compared to that obtained on commonly used C18 column. The method seems to be suitable for the analysis of investigated drugs in human plasma for psychiatric patients in multiple drug overdoses as well as for control of pharmacotherapy, particularly in combination therapy.     

Box–Behnken Experimental Design for the Synthesis of Magnetite–Polypyrrole Composite for the Magnetic Solid Phase Extraction of Non-steroidal Anti-inflammatory Drug Residues

A magnetite–polypyrrole composite adsorbent was synthesized and applied for the magnetic solid phase extraction of three non-steroidal anti-inflammatory drugs in aqueous solution and systematically investigated using Box–Behnken design. The synthesized composite adsorbent was characterized using Fourier-transform infrared spectroscopy, transmission electron microscopy, the Brunauer–Emmett–Teller method, vibrating sample magnetometry, and X-ray diffraction. The material was successfully modeled by Box–Behnken design (R²?=?0.94–0.98, p value: <0.001%) by monitoring the extraction efficiencies of naproxen, diclofenac sodium, and mefenamic acid. The analytes were determined using high-performance liquid chromatography with ultraviolet detection. The polymerization time was found to be the most significant factor, followed by amount of oxidant and monomer in the synthesis of the composite with a fixed Fe₃O₄ mass. Box–Behnken design was employed for the optimization of four parameters affecting the magnetic solid phase extraction: sample pH, salt addition, adsorption, and desorption time (R²?=?0.88–0.94). The optimized conditions for the procedure were validated, providing low detection limits (0.9–3.5?µg?L^?1) with good reproducibility (<7.16% relative standard deviation) and excellent recoveries (97.87–100.49%) for tap, river, and wastewater samples. The synthesized adsorbent demonstrated good adsorption efficiency for the simultaneous determination of the non-steroidal anti-inflammatory drug residues.     

Immunoassay for the detection of lead ions in environmental water samples

A rapid, simple, and reliable competitive immunoassay was developed for measurement of lead ions Pb(II) in environmental samples. Avian antibodies were produced against Pb(II). Since lead ions are too small to elicit an immune response, the metal was coupled to protein carrier Bovine serum albumin (BSA) using a bifunctional chelator 1-(4-isothiocyanobenzyl) ethylenediamine N,N,N′,N′-tetra acetic acid (ITCBE). Poultry birds (layers) were immunised with this Pb(II)–ITCBE–BSA immunoconjugate and the avian antibodies (IgY) isolated from egg yolk recognised Pb(II)-ITCBE complexes as capture reagent and a Pb(II)–ITCBE conjugate of Alkaline phosphatase as an enzyme label. Antibody reaction was optimised for different concentrations of antigen and antibody dilutions. Cross reactivity with other metals were below 1% in competitive ELISA. The IC₅₀ value of this avian antibody was 0.19?µg?mL^?1. The detection range and the detection limit were 0.02–1000?µg?mL^?1and 0.2?µg?mL^?1, respectively.