首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
邵焰  张丽君  张占恩 《分析化学》2011,(11):1753-1757
采用中空纤维膜-液相微萃取-气相色谱/质谱法测定土壤中3种拟除虫菊酯类农药(联苯菊酯、氯氰菊酯、溴氰菊酯)。实验优化的样品制备和萃取条件为:土壤与水的质量比为1∶3,pH=4,超声时间为5 min,萃取剂为环己烷,萃取温度为25℃,搅拌速率为900 r/min,萃取时间为20 min。萃取后取1 mL萃取剂进行色谱分析。在此条件下,当采用SIM模式时,测得土壤中联苯菊酯、氯氰菊酯和溴氰菊酯的线性范围分别为0.01~25 mg/kg,0.5~50 mg/kg和0.5~50 mg/kg;检出限分别为0.003,0.020和0.040 mg/kg;相对标准偏差分别为4.3%,4.7%和8.6%。本方法可用于土壤中拟除虫菊酯类物质的快速测定。  相似文献   

2.
该文以印尼产的燕窝为材料,使用固相微萃取(SPME)技术萃取燕窝中挥发性成分并以气相色谱-质谱(GC-MS)联用仪进行测定。考察了萃取头类型、萃取温度、萃取时间和解吸时间对固相微萃取(SPME)在燕窝挥发性成分测定中的影响。结果表明:以65μm聚二甲基硅氧烷/二乙烯基苯(PDMS/DVB)萃取头、在60℃下萃取60 min,解吸2 min的条件下,SPME/GC-MS技术可检出燕窝中挥发性成分醇、烃、醛、酯、醚类等化合物共82种。该方法具有操作简便、快速、重复性好和灵敏度高的特点,适用于燕窝中挥发性成分的测定。  相似文献   

3.
建立了一种以SBSE萃取与热解吸-气相色谱-火焰光度法联用技术为基础的测定水中倍半芥子气的方法。对比了SBSE和固相微萃取(SPME)对水中的倍半芥子气的萃取回收率,实验结果表明,SBSE对倍半芥子气的萃取率在22.47%~22.60%之间,SPME对倍半芥子气的萃取率为0.4%。研究了萃取时间、解吸附时间、样品溶液pH值、萃取温度对萃取回收率的影响,选择萃取时间为20min、一级解吸时间为10min、二级解吸时间为4min、样品溶液pH值为7.0、萃取温度为25℃。检测倍半芥子气的线性范围为0.462~23.1μg/L,最低检出限为0.0924μg/L(S/N=3)。该方法已成功应用于河水的检测。  相似文献   

4.
建立了一种顶空固相微萃取-气相色谱质谱法(SPME-GC/MS)测定蜂蜜中苯酚的分析方法。对SPME纤维头、萃取温度、萃取时间及解吸时间等萃取条件进行了优化。结果表明:用85μm的聚丙烯酸酯(PA)萃取涂层对蜂蜜中的苯酚萃取效果很好,苯酚在0.5~1000 ng/g的浓度范围内,方法的检出限为0.1ng/g,相对标准偏差(n=9)为3.3%,平均回收率为85.79%~99.35%。  相似文献   

5.
研究了固相微萃取(SPME)-高效液相色谱(HPLC)联用测定水样中痕量苯并(k)荧蒽的的分析方法。对SPME的条件如萃取时间、萃取温度、离子强度、解吸方式、解吸溶剂、解吸时间和HPLC条件进行了优化,建立了SPME-HPLC联用分析水样中痕量苯并(k)荧蒽的方法,并用于自来水、雨水和纯净水等实际水样的分析。SPME优化的条件为室温、搅拌速度1100r/min、萃取时间30min、甲醇解吸溶剂、解吸时间2min。HPLC的条件为C18反相色谱柱、甲醇流动相、流速1mL/min、紫外检测器、波长244nm,以峰高为测量信号。方法的线性范围为0~8.00μg/L,检出限为0.014μg/L,相对标准偏差(n=6)为6.7%,回收率为82.0%~104.2%。该方法适合于水样中痕量苯并(k)荧蒽的分析。  相似文献   

6.
池缔萍 《分析试验室》2007,26(Z1):321-323
采用自动固相微萃取(Automated SPME)超声波辅助萃取技术(UE)与气相色谱联用测定水产品中五氯苯酚及其钠盐残留量.实验优化了SPME直接萃取技术,样品调pH 2,超声波40℃萃取30 min后,用85μm聚丙烯酸酯(PA)萃取头90℃自动搅拌萃取30 min,270℃解吸5 min.最低检出量为0.01μg/kg;五氯苯酚线性范围0.001~10 μg/L,r=0.9999;对鳕鱼加标五氯苯酚1.0、5.0μg/kg回收率分别为71.0%~80.0%、77.2%~91.4%,相对标准偏差(RSD)为6.3%和8.6%(n=3).该方法简便、灵敏、稳定,无溶剂污染,是测定水产品中五氯苯酚及其钠盐残留量的理想方法.  相似文献   

7.
建立了中空纤维液-液-液微萃取高效液相色谱对人尿液中的麻黄碱和伪麻黄碱进行纯化、分离、富集以及测定的方法。采用中空纤维三相微萃取装置,考察了影响萃取的因素,确定了萃取条件:中空纤维壁上的有机相为正辛醇,以50μL盐酸溶液(pH 2.0)为接受相,在室温下萃取60 min。该条件下麻黄碱和伪麻黄碱的富集倍数分别为180倍和220倍,两者的线性范围分别为0.01~5 mg/L和0.005~0.75 mg/L,相关系数(r)分别为0.998 2、0.997 8,定量下限分别为0.01、0.005 mg/L。该方法使用极少量的有机溶剂,便可有效地对尿样中麻黄碱和伪麻黄碱进行纯化、分离和富集,萃取效率高,可用于尿液中麻黄碱和伪麻黄碱的同时测定。  相似文献   

8.
研究了微波辅助萃取(MAE)-固相微萃取(SPME)联合萃取、气相色谱-质谱法(GC-MS)测定土壤中水胺硫磷的分析方法;采用正交设计试验优化了微波升温程序、萃取温度、萃取时间、萃取溶剂体积等MAE条件;研究了SPME萃取涂层、萃取时间、解吸温度等对萃取效率的影响;方法的线性范围在1.O~20μg/L之间,检出限为O.49ng/g;测定25、100ng/g加标土壤样品,回收率分别为79%和107%。RSD分别为2.6%和6.5%;方法综合了MAE快速高效和SPME富集浓缩的优点,以水为萃取溶剂,特别适合于固体样品中痕量有机物的分析。  相似文献   

9.
应用固相微萃取-气相色谱-质谱法测定饮用水源中53种挥发性有机污染物的含量。优化的试验条件如下:1萃取纤维为DVB/CAR/PDMS;2萃取温度为25℃;3顶空体积为9mL;4萃取时间为10min;5解吸温度为200℃;6解吸时间为3min。在气相色谱分离中用VF-624MS柱为固定相,在质谱分析中采用全扫描模式。53种挥发性有机污染物在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.001~0.130μg·L-1之间。方法用于实际水样的分析,加标回收率在75.9%~107%之间,测定值的相对标准偏差(n=5)在0.5%~18%之间。  相似文献   

10.
刘志超  胡霞林  刘景富 《色谱》2010,28(5):513-516
以涂有聚二甲基硅氧烷(PDMS)的石英光导纤维作为固相微萃取纤维,建立了一次性固相微萃取与高效液相色谱联用测定环境水样中的菲、荧蒽和艹屈3种多环芳烃(PAHs)的方法。实验考察了解吸时间、萃取时间、搅拌速度、盐效应以及样品溶液pH值对萃取效率的影响,优化得到的萃取和解吸条件为:于60mL样品溶液中放入两段萃取纤维(1.5cm)和1.2g氯化钠,在1200r/min搅拌速度下萃取60min,取出萃取纤维并转入120μL甲醇中密封静置解吸24h后,取20μL解吸液进行液相色谱测定。该方法对于菲、荧蒽和艹屈的检出限分别为0.17、0.17和0.08μg/L;精密度(以测定0.5μg/LPAHs标准溶液6次的相对标准偏差计)小于8%;实际样品中3种PAHs的加标回收率为80.0%~107%。该方法快速简便,纤维一次性使用,克服了污染物在纤维上残留的问题。  相似文献   

11.
A hollow fibre-based liquid phase microextraction (HF-LPME) coupled with high performance liquid chromatography with fluorescence detection (HPLC-FD) method was developed for the determination of carbendazim (MBC) and thiabendazole (TBZ) in apple juice. Some important extraction parameters, such as the pH of the sample solution, extraction time, stirring rate and salt concentration, were optimised. As a result, the optimal HF-LPME conditions were selected as follows: A 4?mL of sample solution (donor phase) at pH of 7.5 was used for the extraction. The pores of the hollow fibre were impregnated by 1-octanol, and 5?mM HCl (pH?=?2.5) was used as the extraction solvent. The extractions were conducted at a stirring rate of 800?rpm for 40?min. After extraction, 10?µL of the extraction solvent was injected into the HPLC system for analysis. The average enrichment factors were 106 and 114 for MBC and TBZ, respectively. A good linear relationship existed in the range of 2.5?~?500?µg?L?1 and 5?~?500?µg?L?1for MBC and TBZ in apple juice with the correlation coefficients (r) of 0.9995 and 0.9991, respectively. The limits of detection were 0.8?µg?L?1 for MBC and 1.5?µg?L?1 for TBZ (S/N?=?3?:?1). The recoveries of the method were between 86.3% and 106.0% with the relative standard deviations (RSDs) ranging from 3.3% to 8.5%. The HF-LPME-HPLC method has been successfully applied to the analysis of MBC and TBZ in apple juice, indicating that LPME-HPLC may be a promising combination for the analysis of pesticide residues for some food samples.  相似文献   

12.
A method for the determination of metolcarb and diethofencarb in apples and apple juice is developed using solid-phase microextraction (SPME) coupled with high-performance liquid chromatography (HPLC). The experimental conditions of SPME, such as the kind of extraction fiber, extraction time, stirring rate, pH of the extracting solution, and desorption conditions are optimized. The SPME is performed on a 60 microm polydimethylsiloxane/divinylbenzene fiber for 40 min at room temperature with the solution being stirred at 1100 rpm. The extracted pesticides on the SPME fiber are desorbed in the mobile phase into SPME-HPLC interface for HPLC analysis. Separations are carried out on a Baseline C18 column (4.6 i.d. x 250 mm, 5.0 microm) with acetonitrile-water (55/45, v/v) as the mobile phase at a flow rate of 1.0 mL/min, and photodiode-array detection at 210 nm. For apple samples, the method is linear for both metolcarb and diethofencarb in the range of 0.05-1.0 mg/kg (r > 0.99), with a detection limit (S/N = 3 ) of 15 and 5 microg/kg, respectively. For apple juice, the method is linear for both metholcarb and diethofencarb over the range of 0.05-1.0 mg/L (r > 0.99) with the detection limit (S/N = 3 ) of 15 and 3 microg/L, respectively. Excellent recovery and reproducibility values are achieved. The proposed method is shown to be simple, sensitive, and organic solvent-free, and is suitable for the determination of the two pesticides in apples and apple juice.  相似文献   

13.
《Analytical letters》2012,45(2):395-404
Abstract

A rapid determination method for trace bisphenol A in leachate by solid phase microextraction (SPME) coupled with high performance liquid chromatography (HPLC) was developed. The experimental condition of SPME, such as select operation, solid phase microextraction fibers, pH, extraction time, extraction temperature, desorption time, desorption solution, mode, and the analytical conditions of HPLC were optimized. As compared with the graph that was produced by HPLC alone, the graph by only HPLC couldn't analyze bisphenol A and compared to the results of three solid‐phase microextraction fibers. The linear range was between 0.0128 mg/L and 0.192 mg/L in this method, and the correlative coefficient was 0.9975. Limits of detection, repeatability, and reproducibility were also determined. The limit of detection of this method was 3.25 µg/L (3σ, n=11). The relative standard deviation (RSD, n=3) was 4.4%. The method was used for the determination of trace bisphenol A in leachate of Qingshan landfill and leachate of Liufang landfill. The recoveries were between 94.5% and 103.3%. This method is fast, convenient, sensitive, solvent free, and suitable for the determination of trace bisphenol A in leachate.  相似文献   

14.
A novel metal‐ion‐mediated complex‐imprinted‐polymer‐coated solid‐phase microextraction (SPME) fiber used to specifically recognize thiabendazole (TBZ) in citrus and soil samples was developed. The complex‐imprinted polymer was introduced as a novel SPME coating using a “complex template” constructed with Cu(II) ions and TBZ. The recognition and enrichment properties of the coating in water were significantly improved based on the metal ion coordination interaction rather than relying on hydrogen bonding interactions that are commonly applied for the molecularly imprinting technique. Several parameters controlling the extraction performance of the complex‐imprinted‐polymer‐coated fiber were investigated including extraction solvent, pH value, extraction time, metal ion species, etc. Furthermore, SPME coupled with HPLC was developed for detection of TBZ, and the methods resulted in good linearity in the range of 10.0–150.0 ng/mL with a detection limit of 2.4 ng/mL. The proposed method was applied to the analysis of TBZ in spiked soil, orange, and lemon with recoveries of 80.0–86.9% and RSDs of 2.0–8.1%. This research provides an example to prepare a desirable water‐compatible and specifically selective SPME coating to extract target molecules from aqueous samples by introducing metal ions as the mediator.  相似文献   

15.
固相微萃取-高效液相联用分析环境水样中的痕量■   总被引:6,自引:1,他引:6  
 应用固相微萃取与高效液相联用技术 (SPME HPLC)分析了环境水样中的痕量 艹屈 。对SPME的条件如萃取时间、萃取温度、离子强度、解吸方式、解吸溶剂、解吸时间和HPLC条件进行了优化 ,建立了SPME HPLC分析环境水样中痕量 艹屈 的方法 ,并将其用于分析自来水、雨水、矿泉水和江水等实际水样。方法的线性范围为 0 0 13μg/L~ 3 0 μg/L ,检出限为 2 7ng/L ,相对标准偏差 (RSD ,n =6 )为 5 6 % ,回收率为 10 3 2 %~ 119 3%。该方法适合于环境水样中痕量 艹屈 的分析 ,体现了SPME在样品前处理中快速、灵敏、简单、无溶剂的特点。  相似文献   

16.
Two approaches based on sorptive extraction, solid-phase microextraction (SPME) and stir bar sorptive extraction (SBSE), in combination with liquid chromatography (LC)-atmospheric pressure chemical ionization mass spectrometry (MS) have been assayed for analyzing chlorpyriphos methyl, diazinon, fonofos, phenthoate, phosalone, and pirimiphos ethyl in honey. In both, SPME and SBSE, enrichment was performed using a poly(dimethylsiloxane) coating. Significant parameters affecting sorption process such as sample volume, sorption and desorption times, ionic strength, elution solvent, and dilution (water/honey) proportion were optimized and discussed. Performance of both methods has been compared through the determination of linearity, extraction efficiencies, and limits of quantification. Relative standard deviations for the studied compounds were from 3 to 10% by SPME and from 5 to 9% by SBSE. Both methods were linear in a range of at least two orders of magnitude, and the limits of quantification reached ranging from 0.04 to 0.4 mg kg(-1) by SBSE, and from 0.8 to 2 mg kg(-1) by SPME. The two procedures were applied for analyzing 15 commercial honeys of different botanical origin. SPME and SBSE in combination with LC-MS enabled a rapid and simple determination of organophosphorus pesticides in honey. SBSE showed higher concentration capability (large quantities of sample can be handled) and greater accuracy (between 5 and 20 times) and sensitivity (between 10 and 50 times) than SPME: thus, under equal conditions, SBSE is the recommended technique for pesticide analysis in honey.  相似文献   

17.
A novel analytical method is presented for the determination of chlorophenols in water. This method involves pre-concentration by solid-phase microextraction (SPME) and an external desorption using a micellar medium as desorbing agent. Final analysis of the selected chlorophenols compounds was carried out by high-performance liquid chromatography (HPLC) with diode array detection (DAD). Optimum conditions for desorption, using the non-ionic surfactant polyoxyethylene 10 lauryl ether (POLE), such as surfactant concentration and time were studied. A satisfactory reproducibility for the extraction of target compounds, between 6 and 15%, was obtained, and detection limits were in the range of 1.1-5.9ngmL(-1). The developed method is evaluated and compared with the conventional one using organic solvent as a desorbing agent. The method was successfully applied to the determination of chlorophenols in water samples from different origin. This study has demonstrated that solid-phase microextraction with micellar desorption (SPME-MD) can be used as an alternative to conventional SPME method for the extraction of chlorophenols in water samples.  相似文献   

18.
A rapid and sensitive HPLC method has been developed and validated for the determination of abamectin residues (avermectin B1a and B1b, as well as the metabolite 8,9-Z-avermectin B1) in apples, pears and tomatoes. Residues are extracted with acetonitrile. The diluted extract is cleaned up on a C18 solid-phase extraction cartridge. Abamectin residues are derivatised with trifluoroacetic acid and 1-methylimidazole and determined by reversed-phase liquid chromatography with fluorescence detection (excitation: 365 nm and emission: 470 nm). High and consistent recoveries, ranging from 88 to 106%, were obtained, at spiking levels of 10, 20 and 50 micrograms/kg, when analysing apples, pears and tomatoes.  相似文献   

19.
Solid-phase microextraction (SPME) coupled with high-performance liquid chromatography (HPLC) with fluorescence detection was optimized for extraction and determination of four benzimidazole fungicides (benomyl, carbendazim, thiabendazole, and fuberidazole) in water. We studied extraction and desorption conditions, for example fiber type, extraction time, ionic strength, extraction temperature, and desorption time to achieve the maximum efficiency in the extraction. Results indicate that SPME using a Carboxen–polydimethylsiloxane 75 μm (CAR–PDMS) fiber is suitable for extraction of these types of compound. Final analysis of benzimidazole fungicides was performed by HPLC with fluorescence detection. Recoveries ranged from 80.6 to 119.6 with RSDs below 9% and limits of detection between 0.03 and 1.30 ng mL−1 for the different analytes. The optimized procedure was applied successfully to the determination of benzimidazole fungicides mixtures in environmental water samples (sea, sewage, and ground water).  相似文献   

20.
A new approach has been developed for the extraction and determination of aldehydes such as veratraldehyde, m-nitrobenzaldehyde, cinnamaldehyde, benzaldehyde, and p-chlorobenzaldehyde by using solid-phase microextraction (SPME) and high-performance liquid chromatography with UV detection (HPLC/UV). The method involves adsorption of the aldehydes on polydimethylsiloxane/divinylbenzene-coated fiber, followed by desorption in the desorption chamber of the SPME-HPLC interface, using acetonitrile-water (70 + 30) as the mobile phase; UV detection was at 254 nm. A good separation of 5 aldehydes was obtained on a C18 column. The detection limits of veratraldehyde, m-nitrobenzaldehyde, cinnamaldehyde, benzaldehyde, and p-chlorobenzaldehyde are 25, 41, 13, 12, and 11 pg/mL, respectively, which are about 100 times better than the detection limits for other SPME methods using gas chromatography. The proposed method was validated by determining benzaldehyde in bitter almonds and cinnamaldehyde in cinnamon bark. The recoveries of the 5 analytes were determined by analysis of spiked drinking water.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号