Phenothiazine‐S,S‐dioxide‐ and fluorene‐based light‐emitting polymers: Introduction of e−‐deficient S,S‐dioxide into e−‐rich phenothiazine

A novel series of poly(10‐hexyl‐phenothiazine‐S,S‐dioxide‐3,7‐diyl) and poly(9,9′‐dioctyl‐fluorene‐2,7‐diyl‐alt‐10‐hexyl‐3,7‐phenothiazine‐S,S‐dioxide) (PFPTZ‐SS) compounds were synthesized through Ni(0)‐mediated Yamamoto polymerization and Pd(II)‐catalyzed Suzuki polymerization. The synthesized polymers were characterized by ¹H NMR spectroscopy and elemental analysis and showed higher glass transition temperatures than that of pristine polyfluorene. In terms of photoluminescence (PL), the PFPTZ‐SS compounds were highly fluorescent with bright blue emissions in the solid state. Light‐emitting devices were fabricated with these polymers in an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration. The electroluminescence (EL) of the copolymers differed from the PL characteristics: the EL device exhibited a redshifted greenish‐blue emission in contrast to the blue emission observed in the PL. Additionally, this unique phenothiazine‐S,S‐dioxide property, triggered by the introduction of an electron‐deficient SO₂ unit into the electron‐rich phenothiazine, gave rise to improvements in the brightness, maximum luminescence intensity, and quantum efficiency of the EL devices fabricated with PFPTZ‐SS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1236–1246, 2007     

Isolation of terpenoids from Pimpinella anisum essential oil by high‐performance counter‐current chromatography

High‐performance counter‐current chromatography was successfully used for the isolation and purification of terpenoid compounds from the essential oil of Pimpinella anisum L. A two‐phase solvent system composed of n‐heptane/methanol/ethyl acetate/water (5:2:5:2, v/v/v/v) was suitable for the purification of linalool, terpinen‐4‐ol, α‐terpineol, p‐anisaldehyde, while n‐heptane/methanol (1:1, v/v) was used for the isolation of anethole and foeniculin. A scale‐up process from analytical to preparative was developed. Additionally, a stepwise gradient elution was applied and instead of two different runs, 40 min each, one 80 min separation was performed; although the time of separation remains the same, it was possible to repeat the efficiency even if the water‐containing mobile phase was changed to a nonaqueous system. The obtained essential oil, as well as purified compounds, was analyzed by GC. A total of 0.64 mg of linalool, 0.52 mg of terpinen‐4‐ol, 0.10 mg of α‐terpineol, 0.62 mg of p‐anisaldehyde, 15 mg of anethole, and 2.12 mg of foeniculin were obtained from 210 mg of the essential oil of P. anisum L. in a short time with purities of 99, 98, 94, 93.54, 93, and 93.6%, respectively.     

QSRR Study of GC Retention Indices of Volatile Compounds Emitted from Mosla chinensis Maxim by Multiple Linear Regression

The volatile compounds emitted from Mosla chinensis Maxim were analyzed by headspace solid‐phase microextraction (HS‐SPME) and headspace liquid‐phase microextraction (HS‐LPME) combined with gas chromatography‐mass spectrometry (GC‐MS). The main volatiles from Mosla chinensis Maxim were studied in this paper. It can be seen that 61 compounds were separated and identified. Forty‐nine volatile compounds were identified by SPME method, mainly including myrcene, α‐terpinene, p‐cymene, (E)‐ocimene, thymol, thymol acetate and (E)‐β‐farnesene. Forty‐five major volatile compounds were identified by LPME method, including α‐thujene, α‐pinene, camphene, butanoic acid, 2‐methylpropyl ester, myrcene, butanoic acid, butyl ester, α‐terpinene, p‐cymene, (E)‐ocimene, butane, 1,1‐dibutoxy‐, thymol, thymol acetate and (E)‐β‐farnesene. After analyzing the volatile compounds, multiple linear regression (MLR) method was used for building the regression model. Then the quantitative structure‐retention relationship (QSRR) model was validated by predictive‐ability test. The prediction results were in good agreement with the experimental values. The results demonstrated that headspace SPME‐GC‐MS and LPME‐GC‐MS are the simple, rapid and easy sample enrichment technique suitable for analysis of volatile compounds. This investigation provided an effective method for predicting the retention indices of new compounds even in the absence of the standard candidates.     

Screening and separation of α‐amylase inhibitors from Solanum nigrum with amylase‐functionalized magnetic graphene oxide combined with high‐speed counter‐current chromatography

A screening method using α‐amylase‐functionalized magnetic graphene oxide combined with high‐speed counter‐current chromatography was proposed and utilized to screen and separate α‐amylase inhibitors from extract of Solanum nigrum . The α‐amylase‐functionalized magnetic graphene oxide was characterized and found to demonstrate satisfactory structure, magnetic response (24.5 emu/g), and reusability (retained 90% of initial activity after five cycles). The conditions for the screening with α‐amylase functionalized magnetic graphene oxide were optimized and set at pH 7.0 and 25°C. As a result, two potent flavonoid compounds, apigenin‐7‐O‐glucuronide ( 1 ) and astragalin ( 2 ), were separated and collected through high‐speed counter‐current chromatography and subjected to high‐performance liquid chromatography analysis with purity higher than 90% (according to HPLC data), which were identified as α‐amylase inhibitors. These results suggested that utilization of α‐amylase functionalized magnetic graphene oxide in the rapid screening and isolation bioactive compounds from complex natural products is a feasible and environmentally friendly method.     

Photoinduced and thermal reactions of α‐cyano‐β‐bromomethylcinnamide with 1‐benzyl‐1,4‐dihydronicotinamide

The photoinduced reaction of a mixture of (Z)‐α‐cyano‐β‐bromomethylcinnamide (1) and (E)‐α‐cyano‐β‐bromomethylcinnamide (2) with 1‐benzyl‐1, 4‐dihydronicotinamide produces a mixture of the (E)‐ and (Z)‐ isomers of α‐cyano‐β‐methylcinnamide (3 and 4). Using spin‐trapping technique for monitoring reactive intermediate, it is shown that the reaction proceeds via electron transfer‐debromination‐H abstraction mechanism. The thermal reaction of the same substrate with BNAH at 60°C in the dark gives three products: the (E)‐ and (Z)‐isomers of α‐cyano‐β‐methylcinnamide and a dehydrodimeric product; 2, 7‐dicyano‐3, 6‐diphenylocta‐2, 4, 6‐trien‐1, 8‐dioic amide (7). Based on product analysis, scavenger experiment and cyclic voltammetry, an electron transfer‐debromination‐disproportionation mechanism is proposed.     

Polymerization of n‐hexyl isocyanate with CpTiCl2(OR) (R = functional group or macromolecular chain): A route to ω‐functionalized and block copolymers and terpolymers of n‐hexyl isocyanate

Well‐defined ω‐cholesteryl poly(n‐hexyl isocyanate) (PHIC–Chol), as well as diblock copolymers of n‐hexyl isocyanate (HIC) with styrene, PS‐b‐PHIC [PS = polystyrene; PHIC = poly(n‐hexyl isocyanate)], and triblock terpolymers with styrene and isoprene, PS‐b‐PI‐b‐PHIC and PI‐b‐PS‐b‐PHIC (PI = polyisoprene), were synthesized with CpTiCl₂(OR) (R = cholesteryl group, PS, or PS‐b‐PI) complexes. The synthetic strategy involved the reaction of the precursor complex CpTiCl₃ with cholesterol or the suitable ω‐hydroxy homopolymer or block copolymer, followed by the polymerization of HIC. The ω‐hydroxy polymers were prepared by the anionic polymerization of the corresponding monomers and the reaction of the living chains with ethylene oxide. The reaction sequence was monitored by size exclusion chromatography, and the final products were characterized by size exclusion chromatography (light scattering and refractive‐index detectors), nuclear magnetic resonance spectroscopy, and, in the case of PHIC–Chol, differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6503–6514, 2005     

Separation of α‐amylase inhibitors from Abelmoschus esculentus (L).Moench by on‐line two‐dimensional high‐speed counter‐current chromatography target‐guided by ultrafiltration‐HPLC

In this study, an on‐line two‐dimensional high‐speed counter‐current chromatography system based on a six‐port valve was developed. Target‐guided by ultrafiltration with high‐performance liquid chromatography, the one‐step isolation of three potential α‐amylase inhibitors from Abelmoschus esculentus (L).Moench was achieved by employing the developed orthogonal system and extrusion elution mode. The purities of three potential α‐amylase inhibitors were all over 95% as determined by high‐performance liquid chromatography. Furthermore, UV, mass spectrometry and ¹H NMR spectroscopy were applied to the structural identification of the isolated three target compounds, their structures were assigned as quercetin‐3‐O‐sophoroside (i), 5,7,3′,4′‐tetrahydroxy flavonol‐3‐O‐[β‐d ‐rhamnopyranosil‐(1→2)]‐β‐d ‐glucopyranoside (ii ) and isoquercitrin (iii), respectively. The Results demonstrated that the proposed method was highly efficient to screen and isolate enzyme inhibitors from complex natural products extracts, and on‐line two‐dimensional high‐speed counter‐current chromatography can effectively increase the peak resolution of target compounds.     

Heck reactions of aryl halides with alk‐1‐en‐3‐ol derivatives catalysed by a tetraphosphine–palladium complex

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane–[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of alk‐1‐en‐3‐ol with a variety of aryl halides. In the presence of hex‐1‐en‐3‐ol or oct‐1‐en‐3‐ol, the β‐arylated carbonyl compounds were selectively obtained. Turnover numbers up to 84 000 can be obtained for this reaction. Linalool and 2‐methylbut‐3‐en‐2‐ol led regio‐ and stereoselectively to the corresponding (E)‐1‐arylalk‐1‐en‐3‐ol derivatives. A minor electronic effect of the substituents of the aryl bromide was observed. Quite similar reaction rates were generally observed in the presence of activated aryl bromides such as bromoacetophenone and deactivated aryl bromides such as bromoanisole, indicating that, with these alkenols and this catalyst, the oxidative addition of aryl bromides to palladium is not the rate‐limiting step. It should be noted that this reaction also proceeds with sterically very congested aryl bromides such as 9‐bromoanthracene or 2,4,6‐triisopropylbromobenzene or with a vinyl bromide. On the other hand, low yields were obtained with aryl chlorides. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of 4‐Arylisocoumarins (=4‐Aryl‐1H‐2‐benzopyran‐1‐ones) through Acidic Hydrolysis of (Z)‐2‐(1‐Aryl‐2‐methoxyethenyl)benzaldehydes,Followed by Oxidation

4‐Arylisocoumarins (=4‐aryl‐1H‐2‐benzopyran‐1‐ones) 6 were prepared from 2‐(1‐aryl‐2‐methoxyethenyl)‐1‐bromobenzenes 1 . Successive treatment of these bromo styrenes with BuLi and 1‐formylpiperidine gave a mixture of (E)‐ and (Z)‐2‐(1‐aryl‐2‐methoxyethenyl)benzaldehydes 2 . Hydrolysis of (Z)‐isomers with conc. HBr, followed by pyridinium chlorochromate (PCC) oxidation of the resulting 1H‐2‐benzopyran‐1‐ol derivatives 4 (and 5 ), afforded the desired products.     

Identification and quantification of the volatile constituents in Cnidium monnieri using supercritical fluid extraction followed by GC‐MS

The volatile components of Cnidium monnieri were obtained by supercritical fluid extraction (SFE) and analyzed by GC‐MS (identification and determination of metabolites). The compounds were identified according to their retention times and mass spectra. The effects of different parameters, such as extraction pressure, temperature, dynamic extraction time, flow rate of CO₂, on the SFE of C. monnieri extracts were investigated. A total of 14 compounds of SFE extracts were identified. Osthole (69.52%), bornyl acetate (10.03%), α‐pinene (4.71%), and imperatorin (2.42%) were the major compounds identified in C. monnieri SFE extracts. The quantitation of osthole and imperatorin were then accomplished. The linear calibration ranges were all 5–1000 μg/mL for osthole and imperatorin by GC‐MS analysis. The recovery of osthole and imperatorin were in the range 96.5–101.8%. The LODs for osthole and imperatorin were 1.0 and 0.6 μg/mL, respectively.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Analysis of the Volatile Components in the Leaves of Cinna-momum camphora by Static Headspace Gas Chromatography Mass Spectrometry Combined with Accurate Weight Measurement

The volatile components in the leaves of C. camphora were analyzed by static headspace‐gas chromatography/mass spectrometry (HS‐GC‐MS) combined with accurate weight measurement. Accurate weight measurement obtained by Time‐of‐Flight mass spectrometry (TOF‐MS) helped to confirm the identification of volatiles in the analysis. 59 volatile components in the leaves of C. camphora were identified, which mainly included cis‐3‐hexen‐1‐ol (5.6%), 3‐hexen‐1‐ol, acetate (Z) (11.1%), β‐caryophyllene (15.4%), bicyclogermarene (8.4%), trans‐nerolidol (19.5%) and 9‐oxofarnesol (7.7%). The results show that method using HS‐GC‐MS combined with accurate weight measurement achieves reliable identification and has extensive application in the analysis of volatile components present in complex samples.     

Analysis of volatile oil composition of Citrus aurantium L. by microwave‐assisted extraction coupled to headspace solid‐phase microextraction with nanoporous based fibers

Nanoporous silica was prepared and functionalized with amino propyl‐triethoxysilane to be used as a highly porous fiber‐coating material for solid‐phase microextraction (SPME). The prepared nanomaterials were immobilized onto a stainless steel wire for fabrication of the SPME fiber. The proposed fiber was evaluated for the extraction of volatile component of Citrus aurantium L. leaves. A homemade microwave‐assisted extraction followed by headspace (HS) solid‐phase apparatus was used for the extraction of volatile components. For optimization of factors affecting the extraction efficiency of the volatile compounds, a simplex optimization method was used. The repeatability for one fiber (n = 4), expressed as RSD, was between 3.1 and 8.6% and the reproducibility for five prepared fibers was between 10.1 and 14.9% for the test compounds. Using microwave‐assisted distillation HS‐SPME followed by GC‐MS, 53 compounds were separated and identified in C. aurantium L., which mainly included limonene (62.0%), linalool (7.47%), trans‐β‐Ocimene (3.47%), and caryophyllene (2.05%). In comparison to a hydrodistillation method, the proposed technique could equally monitor almost all the components of the sample, in an easier way, which was rapid and required a much lower amount of sample.     

固相β-环糊精包结物诱导7-羟基-2-甲氧基-2-甲基色满的不对称合成

研究了室温下间苯二酚和甲基乙烯基酮分别与β-环糊精（ β-CD）形成包结物后的几种不同固相反应,结果表明包结物A（间苯二酚/β-CD）与包结物B（甲基乙烯基酮/β-CD）反应能够很好地得到目的产物,产率及ee值分别为82.8%和78.4%;间苯二酚与包结物B反应仅得到低光学活性产物（ee值为19.5%）;包结物A与甲基乙烯基酮反应却没有得到手性目的产物。以熔点、X-粉末衍射、固相核磁碳谱及ROESY多种方法对所形成的包结物进行了表征,包结物中主客体的比例（1：1）通过¹H NMR (400 MHz)得以确定,文章对固相环加成反应的机制也进行了初步探讨。     

Reactions of Polymer‐Supported α‐Selenoaldehydes with Grignard Regents. A Facile Solid‐Phase Stereoselective Synthesis of (E)‐1,2‐Disubstituted Ethenes

Polymer‐supported α‐selenoaldehydes easily obtained by reaction of polymer‐supported 4‐(phenylseleno)morpholine with aldehydes react with Grignard reagents to form polymer‐supported β‐hydroxyalkyl selenides, which were treated with thionyl chloride/triethylamine leading to (E)‐1,2‐disubstituted ethenes in good yields.     

Structural and mechanical behavior of polypropylene/ maleated styrene‐(ethylene‐co‐butylene)‐styrene/sisal fiber composites prepared by injection molding

Hybrid composites consisting of isotactic poly(propylene) (PP), sisal fiber (SF), and maleic anhydride grafted styrene‐(ethylene‐co‐butylene)‐styrene copolymer (MA‐SEBS) were prepared by melt compounding, followed by injection molding. The melt‐compounding torque behavior, thermal properties, morphology, crystal structure, and mechanical behavior of the PP/MA‐SEBS/SF composites were systematically investigated. The torque test, thermogravimetric analysis, differential scanning calorimetric, and scanning electron microscopic results all indicated that MA‐SEBS was an effective compatibilizer for the PP/SF composites, and there was a synergism between MA‐SEBS and PP/SF in the thermal stability of the PP/MA‐SEBS/SF composites. Wide‐angle X‐ray diffraction analysis indicated that the α form and β form of the PP crystals coexisted in the PP/MA‐SEBS/SF composites. With the incorporation of MA‐SEBS, the relative amount of β‐form PP crystals decreased significantly. Mechanical tests showed that the tensile strength and impact toughness of the PP/SF composites were generally improved by the incorporation of MA‐SEBS. The instrumented drop‐weight dart‐impact test was also used to examine the impact‐fracture behavior of these composites. The results revealed that the maximum impact force (F_max), impact‐fracture energy (E_T), total impact duration (t_r), crack‐initiation time (t_init), and crack‐propagation time (t_prop) of the composites all tended to increase with an increasing MA‐SEBS content. From these results, the incorporation of MA‐SEBS into PP/SF composites can retard both the crack initiation and propagation phases of the impact‐fracture process. These prolonged the crack initiation and propagation time and increased the energy consumption during impact fracture, thereby leading to toughening of PP/MA‐SEBS/SF composites. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1214–1222, 2002     

Polyvinyl‐Locked versus Free Quaterthiophene: Effect of Spatial Constraints on the Electronic Properties of n‐Hexylquaterthiophene

A soluble, low‐weight fraction of poly(α‐vinyl,ω‐n‐hexyl‐quaterthiophene), PT4Hex, having n‐hexylquaterthiophenes as side‐chain groups, is prepared by free‐radical polymerization of α‐vinyl,ω‐n‐hexyl‐quaterthiophene and the corresponding properties compared to those of free di‐n‐hexylquaterthiophene (T4Hex). Optical analysis (absorption and emission) and X‐ray diffraction data indicate that in the polyvinyl‐locked architecture the quaterthiophene pendants adopt a cofacial arrangement with a mutual distance close enough for π–π orbitals to overlap (～4 Å). As a consequence of the close chain packing, a shift of the reduction potential of about 0.5 V toward less negative values with respect to free T4Hex, is found for PT4Hex films. Due to its enhanced electron affinity, PT4Hex displays an electron‐acceptor behavior when blended with alkylated and silylated quaterthiophenes acting as donors.     

Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties

Isotactic polypropylene (i‐PP) can crystallize in different crystal modifications. In this article, the effect of sepiolite (one‐dimensional) and carbon black (three‐dimensional) fillers on the solid‐state drawability of i‐PP is discussed. The cross‐hatched structure of thermodynamically most stable α‐crystal phase in i‐PP does not allow for perfect chain alignment during solid‐state drawing. The β‐phase i‐PP, obtained by addition of specific nucleating agents, crystallizes in a non‐cross‐hatched spherulitic structure and allows more easy drawing. Depending on the filler type, β–α transformation takes place at different draw ratios, as was observed by in situ wide‐angle X‐ray diffraction measurements. It was observed that β‐nucleated i‐PP has a lower yield stress and can be drawn further than i‐PP crystallized in the α‐crystal phase. If added in the right amount, both carbon black and sepiolite have a reinforcing effect on PP tapes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1071–1082     

The influence of nano‐PS particle on structure evolution and electrical properties of PP/PS

The polypropylene‐g‐polystyrene (PP‐g‐PS) copolymers with different grafting ratios are used as compatibilizers to control the size of polystyrene (PS) particles at nanometer scale in polypropylene (PP) matrix. Then the PP/PS insulating nanocomposites (containing 10 wt % PS calculated from PS and PP‐g‐PS) are manufactured. With the increase in grafting ratio of PP‐g‐PS, the size of PS particle is reduced and the interfacial adhesion is enhanced. Meanwhile, the dielectric properties, DC breakdown strength and volume resistivity are increased with the decreasing of PS particle size. The spherulite size of PP is decreased and the boundary between crystals and amorphous regions is blurred or even disappears due to the presence of PS nanoparticles. This evolution of PP structure is attributed to the serious entanglements of PP and PS molecular chains. Finally, the correlation between morphological structure and electrical properties is ultimately established based on the in‐depth understanding of the molecular chain movement, crystal structure, and phase morphology. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 706–717     

Chemical Composition of the Volatile Oil from the Roots of Selinum tenuifolium Wall.

The essential oil from the underground parts of Selinum tenuifolium Wall. (Apiaceae) was extracted by hydrodistillation using a Clevenger‐type apparatus, and analyzed by GC/FID and GC/MS. Nine constituents, representing 97.7% of the total oil, were identified, five of which belong to the class of polyacetylenes. The structures of the compounds 1 – 5 were elucidated by using IR, MS, and ¹H‐ and ¹³C‐NMR data after purification by column chromatography. The major constituent detected was nona‐3,5‐diyne ( 1 ; 85.6% of the total volatiles), followed by nona‐3,5‐diyn‐2‐one ( 2 ), nona‐4,6‐diyn‐3‐one ( 3 ), nona‐3,5‐diyn‐2‐ol ( 4 ), and nona‐4,6‐diyn‐3‐ol ( 5 ), accounting for 3.0, 2.5, 2.2, and 3.1% of the total volatiles, respectively. The latter four polyacetylenes, 2 – 5 , were never reported in plants so far, and, therefore should be regarded as novel compounds.