Analysis and Identification of the Chemical Constituents of Ding‐Zhi‐Xiao‐Wan Prescription by HPLC‐IT‐MSn and HPLC‐Q‐TOF‐MS

Ding‐Zhi‐Xiao‐Wan (DZXW) is a famous traditional Chinese medicine (TCM) formula, which is composed of four herbs, Ginseng Radix, Poria, Polygala Radix and Acori Tatarinowii Rhizoma. It has been popularly used for the treatment of emotional disease, like Alzheimer's disease, Parkinson's disease, depression, anxiety, forgetfulness and neurasthenia. In this research, a high‐performance liquid chromatography coupled with ion‐trap tandem mass spectrometry (HPLC‐IT‐MSⁿ) method along with a high‐performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry (HPLC‐Q‐TOF‐MS) method in negative ion mode was established to investigate the major constitutions in DZXW. The extracts were prepared by ultra‐sonication in ethyl acetate, n‐butanol, 95% ethanol and deionized water sequentially as well as in deionized water directly. A Kromasil C18 column was used to separate the extracts of DZXW. Acetonitrile and 0.1% aqueous formic acid (V/V) were used as the mobile phase. A total of 64 components were characterized, including 16 triterpenoids, 14 Polygala saponins, 10 oligosaccharide esters, 6 sucrose esters, 2 xanthone C‐glycosides and 16 ginsenosides.     

New Substituted 1‐Aryl‐4,4,6‐Trimethyl‐3,4‐Dihydropyrimidine‐2‐(1H)Thiones; A Metal‐Free and Solvent‐Free Synthesis,Characterization, and Lymphoid Tyrosine Phosphatase Inhibition Studies

A series of fourteen 3,4‐dihydropyrimidine‐2‐thiones ( 3a–n ) were synthesized by a green protocol, and their structures were characterized by spectroanalytical data. The compounds were obtained in high yields by efficient annulation of mesityl oxide (4‐methylpent‐3‐en‐2‐one) with anilines in the presence of potassium thiocyanate. The reaction is essentially metal‐catalyst‐ and solvent‐free, as mesityl oxide itself is the solvent as well as the reactant. The compounds were tested for their ability to inhibit the lymphoid tyrosine phosphatase PTPN22, and 5 of the 14 compounds exhibited IC₅₀ values in the mid‐micromolar range, with the most potent hit being the compound 3d , having a methoxy substituent at the 2‐position of the phenyl ring with an IC₅₀ = 18 ± 1 μM, and second most potent compound ( 3c ) with an IC₅₀ value of 45 ± 3 μM, having methyl substituents at both 2‐ and 4‐position of the phenyl ring.     

Chemoselectivity in the Reaction of 2‐Diazo‐3‐oxo‐3‐phenylpropanal with Aldehydes and Ketones

The chemoselectivity in the reaction of 2‐diazo‐3‐oxo‐3‐phenylpropanal ( 1 ) with aldehydes and ketones in the presence of Et₃N was investigated. The results indicate that 1 reacts with aromatic aldehydes with weak electron‐donating substituents and cyclic ketones under formation of 6‐phenyl‐4H‐1,3‐dioxin‐4‐one derivatives. However, it reacts with aromatic aldehydes with electron‐withdrawing substituents to yield 1,3‐diaryl‐3‐hydroxypropan‐1‐ones, accompanied by chalcone derivatives in some cases. It did not react with linear ketones, aliphatic aldehydes, and aromatic aldehydes with strong electron‐donating substituents. A mechanism for the formation of 1,3‐diaryl‐3‐hydroxypropan‐1‐ones and chalcone derivatives is proposed. We also tried to react 1 with other unsaturated compounds, including various olefins and nitriles, and cumulated unsaturated compounds, such as N,N′‐dialkylcarbodiimines, phenyl isocyanate, isothiocyanate, and CS₂. Only with N,N′‐dialkylcarbodiimines, the expected cycloaddition took place.     

Silica‐tethered cuprous acetophenone thiosemicarbazone (STCATSC) as a novel hybrid nano‐catalyst for highly efficient synthesis of new 1,2,3‐triazolyl‐based metronidazole hybrid analogues having potent antigiardial activity

The preparation, characterization and application of silica‐tethered cuprous acetophenone thiosemicarbazone (STCATSC) as a novel hybrid nano catalyst for synthesis of new 1,2,3‐triazolyl‐based metronidazole hybrid analogues is described. STCATSC is fully characterized by different microscopic, spectroscopic and physical techniques, including scanning electron microscopy (SEM), transmission, X‐ray diffraction (XRD), Energy‐dispersive X‐ray spectroscopy (EDS), thermogravimetric analysis (TGA), FT‐IR and inductively coupled plasma (ICP) analysis. This catalyst is used to prepare the new 1,2,3‐triazolyl‐based metronidazole hybrid analogues. The ‘Click’ Huisgen cycloaddition reaction of 2‐methyl‐5‐nitro‐1‐prop‐2‐ynyl‐1H‐imidazole with diverse β‐azidoalcohols in a THF‐water media at R.T. provides the products in good to excellent yields using STCATSC. STCATSC is proved to be a stable, low cost, reusable and environmentally benign hybrid catalyst. Products are in vitro tested against Giardia lamblia (G. lamblia) in which determined that all compounds exhibit varied promising antigiardial activity compare to metronidazole as a reference drug. Among the products, 1‐(4‐((2‐methyl‐5‐nitro‐1H‐imidazol‐1‐yl)methyl)‐1H‐1,2,3‐triazol‐1‐yl)‐3‐phenethoxypropan‐2‐ol and 1‐(4‐((2‐methyl‐5‐nitro‐1H‐imidazol‐1‐yl)methyl)‐1H‐1,2,3‐triazol‐1‐yl)‐3‐(3‐phenylpropoxy)propan‐2‐ol are demonstrated to exhibit the potent antigiardial activity even stronger than metronidazole.     

A Highly Selective and Sensitive Barium(II)‐Selective PVC Membrane Based on Dimethyl 1‐Acetyl‐8‐oxo‐2,8‐dihydro‐ 1H‐pyra‐zolo[5,1‐a]isoindole‐2,3‐dicarboxylate

A poly(vinyl chloride)‐based membrane of dimethyl 1‐acetyl‐8‐oxo‐2,8‐dihydro‐1H‐pyra‐zolo[5,1‐a]isoindole‐2,3‐dicarboxylate as a neutral carrier with sodium tetraphenylborate (NaTPB) as an anion excluder and 2‐nitrophenyl octyl ether (NPOE) as plasticizer was prepared and investigated as a Ba(II)‐selective electrode. The electrode exhibits a Nernstian slope of 29.7±0.4 mV per decade over a wide concentration range (1.0×10^?6 to 1.0×10^?1 M) with a detection limit of 7.6×10^?7 M between pH 3.0 and 11.0. The response time of the sensor is about 10 s and it can be used over a period of 2 months without any divergence in potential. The proposed membrane sensor revealed good selectivity for Ba(II) over a wide variety of other metal ions. It was successfully used in direct determination of barium ions in industrial wastewater samples.     

Formation of Core‐Shell‐Corona Micellar Complexes through Adsorption of Double Hydrophilic Diblock Copolymers into Core‐Shell Micelles

Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.

Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles.     

Melamine Trisulfunic Acid: An Efficient and Recyclable Solid Acid Catalyst for the Synthesis of 4,4′‐(Arylmethylene)‐bis‐(1H‐pyrazol‐5‐ols)

Melamine trisulfunic acid is employed as a recyclable catalyst for the condensation reaction of aromatic aldehydes with 3‐methyl‐l‐phenyl‐2‐pyrazolin‐5‐one. This condensation reaction was performed in ethanol under refluxing conditions giving 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H‐pyrazol‐5‐ols) in 80‐96% yields.     

Synthesis of 4,6‐Dimethyldibenzothiophene and 1,2,3,4‐Tetrahydro‐4,6‐dimethyldibenzothiophene via Tilak Annulation

1,2,3,4‐Tetrahydro‐4,6‐dimethyldibenzothiophene was prepared by coupling 2‐bromo‐3‐methylcyclohexanone with 2‐methylbenzenethiol and annulating the product with the aid of polyphosphoric acid. A mixture of 1,2,3,4‐tetrahydro‐4,6‐dimethyldibenzothiophene and 4,6‐dimethyldibenzothiophene was prepared by coupling 2‐bromo‐3‐methylcyclohex‐2‐en‐1‐one with 2‐methylbenzenethiol and annulating the product with the aid of polyphosphoric acid. 2‐Bromo‐3‐methylcyclohexanone was synthesized by conjugate addition of Me₃Al to 2‐bromocyclohex‐2‐en‐1‐one with CuBr as catalyst and 2‐bromo‐3‐methylcyclohex‐2‐en‐1‐one by bromination? elimination of 3‐methylcyclohex‐2‐en‐1‐one. 1,2,3,4,4a,9b‐Hexahydro‐4,6‐dimethyldibenzothiophene was prepared by reduction of 1,2,3,4‐tetrahydro‐4,6‐dimethyldibenzothiophene with Zn and CF₃COOH.     

Über die Oxo‐cyclotetraphosphane (PBut)4O1–4

Contributions to the Chemistry of Phosphorus. 243 On the Oxocyclotetraphosphanes (PBu^t)₄O_1–4 Under suitable conditions, the reaction of tetra‐tert‐butylcyclotetraphosphane, (PBu^t)₄, with dry atmospheric oxygen gives rise to the corresponding monoxide (PBu^t)₄O ( 1 ) which has been isolated by column chromatography. The reaction with hydrogen peroxide furnishes a mixture of oxocyclotetraphosphanes (PBu^t)₄O_1–4 consisting of two constitutionally isomeric dioxides (PBu^t)₄O₂ ( 2 a , 2 b ), the trioxide (PBu^t)₄O₃ ( 3 ), and the tetraoxide (PBu^t)₄O₄ ( 4 ), in addition to 1 . According to the ³¹P NMR parameters the oxygen atoms are exclusively exocyclically bonded to the phosphorus four‐membered ring. Which of the P atoms are present as λ⁵‐phosphorus follows from the different low‐field shifts of the individual P nuclei compared with the starting compound. Accordingly, 1 is 1,2,3,4‐Tetra‐tert‐butyl‐1‐oxocyclotetraphosphane, 2 a and 2 b are 1,2,3,4‐Tetra‐tert‐butyl‐1,2‐dioxo‐ and ‐1,3‐dioxocyclotetraphosphane, respectively, 3 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3‐trioxocyclotetraphosphane, and 4 is 1,2,3,4‐Tetra‐tert‐butyl‐1,2,3,4‐tetraoxocyclotetraphosphane. When the oxidation reaction proceeds a fission of the P₄ ring takes place.     

Atom Transfer Radical Polymerization of Styrene with 5‐Chloromethyl‐2‐hydroxy‐benzaldehyde as Initiator

Abstract

Atom transfer radical polymerization (ATRP) of styrene (St) proceeded using 5‐chloromethyl‐2‐hydroxy‐benzaldehyde as initiator, CuCl as catalyst, and N,N,N′,N′,N′‐pentamethyldiethyltriamine (PMDETA) as ligand. The results show that the polymerization is a first order reaction with respect to monomer concentration. The polymerization displayed living character as evidenced by a liner increase of monomer weight with conversation and a relatively narrow distribution (M _n/M _w ranges from 1.25 to 1.50). The end structure of PSt was analyzed by ¹H‐NMR, and PSt initiated MMA to form block copolymer (PSt‐b‐PMMA), which also proved that the polymerization could be controlled. The effects of reaction temperature and monomer to initiator mole ratio on the polymerization displayed living character were discussed.     

A New pH Indicator Based on 2,5‐Diaryl‐1‐salicylideneamino‐1,3,4‐triazole Derivative

2‐Phenyl‐5‐p‐tolyl‐1‐salicylideneamino‐1,3,4‐triazole (PTST) was studied among 2,5‐diaryl‐1‐salicylidene amino‐1,3,4‐triazole derivatives as a novel potential pH indicator. In terms of absorption intensity coming from the acid‐base reactions, PTST showed strong yellow‐green colour with high extinction coefficient in the pH range 7.0–9.5. In addition, the corresponding colour development at the transition point can be attributed to the resonance structures of PTST, which were caused by the hydrogen ion dissociation from the acidic form of the compound in the presence of alkali. The full geometric optimization and achievement of the electronic structure of the molecule were performed by an AM1 semiempirical method. The triazole compound was compared with phenolphthalein (PT), which is widely used as an acid‐base indicator in titrimetry, for accuracy test.     

Facile One‐Pot Synthesis of 4‐Hydroxy‐2‐methyl‐(2H)‐1,2‐benzothiazine‐3‐sulfonic Acid 1,1‐Dioxide

We report a convenient synthesis of 4‐hydroxy‐2‐methyl‐(2H)‐1,2‐benzothiazine‐3‐sulfonic acid‐1,1‐dioxide (6a) prepared in a novel one‐pot reaction. The synthesis involves two transformations starting from 2‐methyl‐2H‐1,2‐benzothiazin‐4‐(3H)‐one 1,1‐dioxide (7) with an overall yield better than that from the stepwise process, as well as the alternate procedure starting from saccharin (1). One‐pot synthesis of an important intermediate, saccharin‐N‐methane sulfonic acid (4), is also described.     

Heck reactions of aryl halides with alk‐1‐en‐3‐ol derivatives catalysed by a tetraphosphine–palladium complex

cis,cis,cis‐1,2,3,4‐Tetrakis(diphenylphosphinomethyl)cyclopentane–[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of alk‐1‐en‐3‐ol with a variety of aryl halides. In the presence of hex‐1‐en‐3‐ol or oct‐1‐en‐3‐ol, the β‐arylated carbonyl compounds were selectively obtained. Turnover numbers up to 84 000 can be obtained for this reaction. Linalool and 2‐methylbut‐3‐en‐2‐ol led regio‐ and stereoselectively to the corresponding (E)‐1‐arylalk‐1‐en‐3‐ol derivatives. A minor electronic effect of the substituents of the aryl bromide was observed. Quite similar reaction rates were generally observed in the presence of activated aryl bromides such as bromoacetophenone and deactivated aryl bromides such as bromoanisole, indicating that, with these alkenols and this catalyst, the oxidative addition of aryl bromides to palladium is not the rate‐limiting step. It should be noted that this reaction also proceeds with sterically very congested aryl bromides such as 9‐bromoanthracene or 2,4,6‐triisopropylbromobenzene or with a vinyl bromide. On the other hand, low yields were obtained with aryl chlorides. Copyright © 2006 John Wiley & Sons, Ltd.     

Regioselective Synthesis of Fused Azo‐linked Pyrazolo[4,3‐e]pyridines Using Nano‐Fe3O4

A multicomponent reaction for the synthesis of fused azo‐linked pyrazolo[4,3‐e]pyridines from 3‐amino‐5‐methylpyrazole, indan‐1,3‐dione and synthesized azo‐linked aldehydes using nano‐Fe₃O₄ as an effective and reusable catalyst is reported. The present methodology offers several advantages, such as a simple procedure with an easy work‐up, short reaction times, high yields, and the absence of any volatile and hazardous organic solvents.     

Facile Synthesis of 3(2H)‐Pyridazinones and 2(3H)‐Furanones of Anticipated Biological Activities

3‐Aroyl‐2‐arylpropionic acids 2a‐e were utilized to synthesize 3(2H)‐pyridazinones 3a‐e and 2(3H)‐furanones 6 through reaction with hydrazine hydrate and freshly distilled acetic anhydride, respectively, in the hope of obtaining new 3(2H)‐pyridazinones with no ulcerogenic side effect or with negligible general side effects as those currently used NSAID_S as well as biologically active 2(3H)‐furanones.     

Synthesis and Evaluation of Optical 2‐Benzyl‐5‐bromo‐4‐oxopentanoic Acids as Transition‐state Analog Inhibitors against Carboxypeptidase A

Both enantiomers of 2‐benzyl‐5‐bromo‐4‐oxopentanoic acid were prepared utilizing the diazo ketones as the key intermediates. The compounds were assayed for inhibitory activity against carboxypeptidase A (CPA, EC 3.4.17.1). The (R)‐form is 260‐fold more potent than the corresponding (S)‐form. The finding that (R)‐form, which belongs to the L‐series, is mostly responsible for the inhibitory activity accords with the substrate specificity of CPA. For comparison, both the optical forms of 2‐benzyl‐4‐oxopentanoic acid were also synthesized and evaluated as the inhibitors against CPA. These results reveal that the introduction of a bromo group at the α‐position of ketones can significantly enhance the electrophilicity of the carbonyl group. Further molecular docking study suggested that the gem‐diol form of the α‐bromo ketone, which mimics the transition state in the CPA catalytic process, could chelate the zinc ion in the active site of CPA and thus result in the strong inhibition.     

Synthesis,Reactions, Characterization and Biological Evaluation of 2,3′‐Bipyridine Derivatives (III)

1‐Pyridin‐3‐yl‐3‐(2‐thienyl of 2‐furyl)prop‐2‐en‐1‐ones 1a , 1b reacted with 2‐cyanoethanethioamide 2 to afford the corresponding 4‐(thiophen‐2‐yl or furan‐2‐yl)‐6‐sulfanyl‐2,3′‐bipyridine‐5‐carbonitriles 3a , 3b . The synthetic potentiality of compounds 3a , 3b were investigated in the present study via their reactions with several active halogen containing compounds 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4h , 5 , 5a , 5b . Our aim here is the synthesis of 4‐(2‐thienyl or 2‐furyl)‐6‐pyridin‐3‐ylthieno[2,3‐b]pyridin‐3‐amines 6a , 6b , 6c , 6d , 6e , 6g , 6h , 6i , 6j , 6k , 6l , 6m , 6n ,via 6‐(alkyl‐thio)‐4‐(2‐thienyl or 2‐furyl)‐2,3′‐bipyridine‐5‐carbonitriles 5a , 5b , 5c , 5d , 5e , 5i , 5j , 5k , 5l , 5m . The structures of all newly synthesized heterocyclic compounds were elucidated by considering the data of IR, ¹H‐NMR, mass spectra, as well as that of elemental analyses. Anti‐cancer, anti‐Alzheimer, and anti‐COX‐2 activities were investigated for all the newly synthesized heterocyclic compounds.     

A Novel One‐Pot Synthesis of Substituted Quinolines

A synthesis of quinoline derivatives is described via reaction between ethyl bromopyruvate (=ethyl 3‐bromo‐2‐oxopropanoate), acetylenedicarboxylate, and isatin (=1H‐indole‐2,3‐dione) in the presence of NaH as a base. Also, these reactions were performed without ethyl bromopyruvate. The reaction in the presence of ethyl bromopyruvate provides regioselectively a quinoline with the ethyl ester group in 4‐position. In the absence of ethyl bromopyruvate, the reaction leads to functionalized quinolines with the same ester groups in 2‐, 3‐, and 4‐positions.     

Microwave Promoted and Improved Thermal Synthesis of Spiro[Indole‐Pyranobenzopyrans] and Spiro[Indole‐Pyranoimidazoles]

Spiro[indole‐pyranoimidazoles] ( 5 ) and spiro[indole‐pyranobenzopyrans] ( 6 ) are readily synthesized in one step in 86–92 and 91–97% yields by the Michael condensation of 3‐dicyanomethylene‐2H‐indol‐2‐ones ( 2 ) with 1‐phenyl‐2‐thiohydantoin ( 3 ) and 4‐hydroxy‐2H‐1‐benzopyran‐2‐one ( 4 ), respectively, without using any catalyst under different reaction conditions (conventional heating and microwave irradiation using (a) polar solvents (b) neutral alumina/silica gel as inorganic solid support in solvent free conditions). 2 was synthesized in situ by the Knoevenagel condensation of indole‐2,3‐dione ( 1 ) and malononitrile in the absence of any catalyst. 100% conversion was observed in most cases on TLC which also showed the formation of a single product. The comparison between the various methods is established.     

Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006