Trace elements in Variegated Bolete (Suillus variegatus) fungi

Metallic elements such as Ag, Al, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Rb, Sr, and Zn were determined using ICP-OES in a representative set of fifteen fruiting bodies of the edible fungus Suillus variegatus. Fruiting bodies were collected from unpolluted areas near the village of Lubichowo of the Bory Tucholskie forest complex in northern Poland in 2007?C2008. The caps were richer in Ag, Al, Cd, Cr, Cu, Fe, K,Mg, Ni, Rb, and Zn, and the stipes in Ba, Ca, Mn, Na, Pb, and Sr. Cobalt concentration in the caps and stipes was similar. In the caps, the content of the elements decreased in the order (mg per kg of dry weight): K 29000 ± 3700, Fe 1600 ± 80, Mg 990 ± 110, Rb 320 ± 86, Zn 90 ± 19, Ca 75 ± 34, Al 68 ± 32, Na 40 ± 18, Cu 19 ± 7, Mn 13 ± 7, Cd 1.0 ± 0.5, Ni 0.64 ± 0.32, Ag 0.40 ± 0.20, Cr 0.33 ± 0.06, Pb 0.20 ± 0.17, Ba 0.19 ± 0.11, Sr 0.15 ± 0.09, and Co 0.070 ± 0.050. Apparently, S. variegatus collected from background areas are relatively low in Pb and Cd and so are suitable for human consumption.     

Determination of trace elements of some Egyptian crops by instrumental neutron activation,inductively coupled plasma-atomic emission spectrometric and flameless atomic absorption spectrophotometric analysis

Instrumental neutron activation analysis was used for the determination of Al, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc, Se, Ti, Th, V and Zn, ICP-AES for the determination Al, Ag, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, P, Sc, Sr, Ti, V and Zn and flameless AAS for the determination of Cd, Hg and Pb in egg plant, potatoes, green pepper (Leguminosae), vegetable marrow (Cucurbitaceae), pears, apple (Rosaceae), castor oil plant (Euphorbiaceae), lettuce (compositae), dill, parsley, coriander (Umbelliferae), and in some soil samples collected from Aswan province.     

Determination of impurities in nuclear fuel element components by neutron activation analysis

Neutron activation analysis methods for the determination of impurities in zirconium cladding material and uranium oxide are described. Detection limits for the elements Al, Cd, Cr, Co, Cu, Hf, Fe, Mn, Ni, W and U in zirconium are below that required by the ASTM B 352-79 standard. The method has been tested on the NIST SRM 360a Zircaloy-2 from which the elements Na, Mg, Al, Ca, V, Cr, Fe, Co, Ni, Cu, Eu and U have been detected. The values for Cr, Fe, Ni and Cu are compared with the certified values. A method for the pre-irradiation separation of the elements Mg, Na, Al, K, Sc, Ca, V, Mn, Cr, Fe, Co, Cu, Zn, Rb, Zr, Cd, Cs, REE and Hf from uranium has been developed. A neutron activation analysis method for the determination of those elements in uranium is described. The method is tested by the analysis of the IAEA reference sample SR-54/64. The elements Al, Mn, V, Cu, Cr, Co, Ni and Fe have been detected and the results compared with the certified values.     

Determination of 24 elements in four algae reference materials by neutron activation analysis and inductively coupled plasma mass spectrometry

Four algae reference materials, IAEA-391, 392, 393 and IAEA-140, prepared by the International Atomic Energy Agency for intercomparison under different preparation conditions were analyzed for 24 elements. Conventional neutron activation analysis (NAA) was used to determine Al, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Sb, V and Zn and epithermal NAA using BN and Cd as shielding material for I, Br, As, Ni, Mo and Cd. Inductively coupled plasma mass spectrometry (ICP-MS) as a complementary and comparative method was applied to determine Pb, Sn, Ni, Sr, Rb, As, Co, Cr, Cu, Mn, V, Mo and Zn. Two analytical quality control standard reference materials IAEA-V-10 (hay powder) and IAEA-331 (spinach) were analyzed simultaneously with real samples. The results agree quite well with each other and with the certified values.     

Preparation of the Bovine Kidney and Bovine Muscle reference materials and the certification of element contents from interlaboratory comparisons

Results obtained in interlaboratory comparisons on candidate reference materials Bovine Kidney and Bovine Muscle, in which more than 32 laboratories participated employing atomic spectrometry, electrochemical, and nuclear analytical techniques, have been evaluated using combined statistical and analytical considerations. Certified and/or information values for the elements Br, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, P, Pb, Rb, Se, and Zn have been established. Information on contents of the elements Al, As, Au, Cs, Li, Ni, Sb, Sn, Sr, and V is also presented.     

藏药材白花龙胆花中微量元素的分析

对藏药材白花龙胆花中17种微量元素（Cu、Zn、Fe、Mn、Co、Ni、Se、Cr、Mg、Ca、K、Na、P、As、Hg、Pb、Cd）的含量作了测定。结果表明,白花龙胆花中含有较高的人体必需微量元素和常量元素,其中常量元素K、Ca、Na、Mg和微量元素Zn、Fe、Mn的含量均较高。     

Summary of preparation and homogeneity characterization of ten agricultural food reference materials for elemental composition

Summary Preparation and development has been completed of ten agricultural/food reference materials (RMs): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, durum wheat flour, whole egg powder and microcrystalline cellulose. Homogeneity tests for 14 elements, Al, Ca, Cd, Co, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sr and Zn were performed by the initiating laboratories by application of precise and reliable analytical methods based on flame atomic absorption spectrometry and graphite furnace atomic absorption spectrometry. An extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Estimates of homogeneity from within-laboratory precision indicated that all materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values are available. Two thirds of all homogeneity coefficients of variation were below 5%.     

前列舒通胶囊中26种无机元素的分析

目的：明确造成前列舒通胶囊不同批次间差异的标志性无机元素,并进行安全性评价。方法：采用ICP-MS测定制剂中Al、As、B、Ba、Ca、Cd、Co、Cr、Cu、Fe、K、Mg、Mn、Mo、Na、Ni、Pb、Sb、Se、Sn、Sr、Ti、Tl、V、Zn和Hg元素含量并进行数据分析。运用主成分及综合评分结合聚类分析手段,确定制剂的特征性元素;进行元素含量和相关性分析,明确不同批次各元素的差异及元素之间的关系;以多元素含量为指标,绘制无机元素谱图。结果：19批样品中均未检测出Se、Mo、Sn、Sb、Tl和Hg,且Pb、Cd、As、Cu、Hg均符合限量标准,无机元素含量谱图趋势一致。主成分分析提取了4个主成分,确定元素B、K、Al、V、Cr、Ca、Ti、Na、Co和Mn可作为特征元素。主成分得分图将19批样品分为两类,聚类分析及综合评分结果与其一致,两类样品中各元素含量存在差异性。相关性分析中,明确了B与K、Al、Cr正相关,K与Cr、Co正相关,V与Cr、Mn正相关,Mn与Co正相关,Ca、Ti、Na两两正相关。结论：通过分析前列舒通胶囊中无机元素含量,确定了特征元素,为前列舒通胶囊质量全面控制研究提供科学依据。     

电感耦合等离子体原子发射光谱法测定紫斑牡丹胚乳和胚中矿物质元素

为了给离体体细胞胚的人工胚乳配制提供矿物质元素种类和数量方面的参考,用浓硝酸-高氯酸(4∶1)的混合溶液消解紫斑牡丹的胚乳和胚样品,采用电感耦合等离子体-原子发射光谱法(ICP-AES)测定了样品中的(K、Na、Ca、Mg、Fe、Cu、Zn、Mn、Li、Ni、B、Ag、Cd、Pb)14种矿物质元素含量。结果表明:各元素的校准曲线的回归系数在0.9990～0.9999之间,线性良好;方法精密度高,能多元素同时分析;紫斑牡丹胚乳和胚中均含有植物生长必需的K、Ca、Mg 3种大量元素,Fe、Mn、Cu、Zn、Ni、B 6种微量元素,1种有益元素Na,及Li和Pb,Ag、Cd则未被检测到。在被检测到的12种元素中,Mg、Zn、Mn、Fe、K、Na、Li与Ni 8种元素在胚乳中的含量低于胚中的含量,Ca、Cu、Pb与B在胚乳中的含量则高于胚中的含量。     

Evaluation of strontium isotope abundance ratios in combination with multi-elemental analysis as a possible tool to study the geographical origin of ciders

In order to evaluate alternative analytical methodologies to study the geographical origin of ciders, both multi-elemental analysis and Sr isotope abundance ratios in combination with multivariate statistical analysis were estimated in 67 samples from England, Switzerland, France and two Spanish regions (Asturias and the Basque Country). A methodology for the precise and accurate determination of the ⁸⁷Sr/⁸⁶Sr isotope abundance ratio in ciders by multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS) was developed. Major elements (Na, K, Ca and Mg) were measured by ICP-AES and minor and trace elements (Li, Be, B, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Y, Mo, Cd, Sn, Sb, Cs, Ba, La, Ce, W, Tl, Pb, Bi, Th and U) were measured by ICP-MS using a collision cell instrument operated in multitune mode. An analysis of variance (ANOVA test) indicated that group means for B, Cr, Fe, Ni, Cu, Se, Cd, Cs, Ce, W, Pb, Bi and U did not show any significant differences at the 95% confidence level, so these elements were rejected for further statistical analysis. Another group of elements (Li, Be, Sc, Co, Ga, Y, Sn, Sb, La, Tl, Th) was removed from the data set because concentrations were close to the limits of detection for many samples. Therefore, the remaining elements (Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba) together with ⁸⁷Sr/⁸⁶Sr isotope abundance ratio were considered for principal component analysis (PCA) and linear discriminant analysis (LDA). Finally, LDA was able to classify correctly 100% of cider samples coming from different Spanish regions, France, England and Switzerland when considering Na, Mg, Al, K, Ca, Ti, V, Mn, Zn, As, Rb, Sr, Mo, Ba and ⁸⁷Sr/⁸⁶Sr isotope abundance ratio as original variables.     

Distribution of Minor and Trace Metals in Carezza Lake (ANTARCTICA) Ecosystem

Abstract

This paper reports the distribution of a series of metals in natural samples collected at Carezza Lake in Antarctica, during the Italian Expedition in the austral summer 1989/90. The considered elements are: water, sediments and soil sampled from the surroundings of the lake and algae. The determination of the total concentration of the following metals was performed: Al, As, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, Zn. In addition, for sediment and soil samples, a speciation study was performed for some metals, namely Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, using the Tessier procedure.     

An integrated approach to the complete chemical analysis of magnesium or sodium diuranate (yellow cake) sample

A procedure for the complete chemical analysis of magnesium or sodium diuranate (yellow cake) sample is reported. Uranium is determined gravimetrically after peroxide precipitation. Optimum parameters, such as pH, quantity of hydrogen peroxide, volume of sample, temperature and complexing agent for quantitave precipitation of uranium, and effective separation of other elements were studied. Aluminum, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, and Zn were determined by flame atomic absorption spectrometer and B, Mo, SO₄, REEs and Y by inductively coupled plasma atomic emission spectrometer in the filtrates of hydroxide and peroxide precipitation separation. The proposed method is accurate and the precision is characterized by an RSD of ~0.2% for U; 2 to 6% for Mg, Na, K, Ca, Fe, SiO₂, Al, Cd, Co, Cr, Fe, Mn, Ni, Pb, and Zn and 3 to7% for REEs, Y, Mo and B     

Mineral constituents of edible parasol mushroom Macrolepiota procera (Scop. ex Fr.) Sing and soils beneath its fruiting bodies collected from a rural forest area

Concentrations and interrelationships of twenty elements were studied in parasol mushroom and in the top layer of soil (0–10 cm) from the area of Kiwity (Poland). K, P, Mg, Ca, and Zn were found to be the most abundant elements in the mushroom. Higher concentrations of Fe, Mn, Na, Ni occurred in stipes then in caps, while Cd, Cr, Cu, Hg, Rb dominated in caps. Ag, Al, and Ba concentrations in caps and stipes were similar. Parasol mushroom is efficient in up-take and separation of Ag, Cd, Cu, Hg, K (in caps, the bioconcentration factor is BCF ≥ 100), Na, P, Rb (50 < BCF < 100), and Mg, Zn (BCF > 10) in its fruiting bodies, while Al, Ba, Ca, Co, Cr, Fe, Mn, Sr, and Pb are eliminated (BCF < 1). Parasol mushroom from rural forest area in the north-eastern region of Poland is of hygienic concern for human health because of toxic mercury and cadmium content in the edible caps, which are also rich in essential Cu, Fe, and their K, Mn, and Zn content is also high.     

不同产地高良姜无机元素含量的比较

用等离子体发射光谱法测定了三个不同产地高良姜的元素含量，在２７种被测元素中，除Ａｓ、Ｂｅ、Ｃｒ、Ｍｏ、Ｐｂ、Ｓｂ、Ｔｌ７种元素未被检出外，三个产地的高良姜均含有Ａｇ、Ａｌ、Ｂ、Ｂａ、Ｃａ、Ｃｄ、Ｃｏ、Ｃｕ、Ｆｅ、Ｍｇ、Ｍｎ、Ｎａ、Ｎｉ、Ｓｅ、Ｓｉ、Ｖ、Ｚｎ、Ｋ、Ｐ、Ｓ２０种元素，湛江产的高良姜大多数元素的含量要高于其它两地。Ｚｎ和Ｍｎ两种人体必需微量元素的含量较丰富。     

Trace Elements in Pleurotus Ostreatus,P. Eryngii,and P. Nebrodensis Mushrooms Cultivated on Various Agricultural By-Products

Abstract

Mushrooms are efficient accumulators of essential and toxic elements. Although oyster (Pleurotus spp.) mushrooms are widely commercialized and consumed, few data exist regarding trace elements content and bioaccumulation in cultivated P. ostreatus and P. eryngii, while no data are available for P. nebrodensis. The contents of Al, As, Ba, Cd, Co, Cr, Cs, Cu, Fe, K, Mn, Na, Ni, Pb, Rb, Sr, V, and Zn were monitored using inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (AES) in P. ostreatus, P. eryngii, and P. nebrodensis mushrooms and their cultivation substrates that include wheat straw (WHS), grape marc (GMC), olive leaves (OLV), and two-phase olive mill wastes (OMW), separately or in mixtures. Bioaccumulation factors (BAFs) less than 0.3 were obtained for Al, Ba, Co, Cr, Fe, Mn, Ni, Pb, Sr, and V; BAFs exceeding 1 for K?>?Zn?>?Cd?>?Cr?>?Rb?>?As, while the BAFs for Na were less 0.7. Mushrooms grown on OLV and OMW presented lower BAFs than those grown on WHS and GMC for all elements except for K, Cd, and Cu. P. ostreatus was an effective accumulator for Cr, Fe, and Zn; P. eryngii for Al, Cs, Ni, and V; and P. nebrodensis for As and Cd. The estimated daily intakes (μg kg^?1 body weight) from mushroom consumption were less than 0.010 for As, Cd, Co, Cs, Pb, and V, 0.010–0.10 for Ba, Cr, Ni, and Sr, 0.10–5.0 for Al, Cu, Fe, Mn, Rb, and Zn, 65–83 for Na, and 858–1030 for K. Overall, the mushrooms studied provide significant amounts of K, adequate amounts of Mn and Zn and low amounts of Na and toxic elements.     

Preparation and homogeneity characterization of ten agricultural/food reference materials for elemental composition

Summary Ten agricultural/food reference materials (RM): bovine muscle powder, corn starch, hard red spring wheat flour, soft winter wheat flour, whole milk powder, wheat gluten, corn bran, Durum wheat flour, whole egg powder and microcystalline cellulose, were prepared by milling, irradiation, sieving, blending and packaging procedures. Homogeneity tests for 14 elements in randomly selected units were performed by the initiating laboratories by application of various analytical methods. Al, Ca, Cu, Fe, K, Mg, Mn, Na, Sr and Zn were determined by acid digestion flame atomic absorption spectrometry, and Cd, Co, Ni and Pb using acid digestion graphite furnace atomic absorption spectrometry after separation/preconcentration of the analytes by co-precipitation. In addition, the extensive set of analytical results obtained from the interlaboratory cooperative characterization campaign was assessed to provide homogeneity estimates for other elements. Measures of homogeneity were estimated from the within-laboratory precision from the more precise laboratories. All materials exhibited acceptable homogeneity for virtually all 29 elements (Al, As, B, Ba, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, Mg, Mn, Mo, N, Na, Ni, P, Pb, Rb, S, Se, Sr, V, Zn) for which best estimate concentration values were available, an essential pre-requisite in establishing reference values for these materials. Sixty-two percent of all homogeneity coefficients of variation (CV) were below 5%, with Br, Ca, Cl, Mg, Na, P, Zn and especially K and N exhibiting very high homogeneity CV less than 1% in some cases.Contribution no. 92–148 from Centre for Land and Biological Resources Research     

Inorganic species in water and sediments of the Lamone and Marzeno rivers ecosystem

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Lamone and Marzeno rivers ecosystem. The species determined are Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Hg, F-, Cl- Br-, NO3-, SO4--, Na+, K+, Mg++, Ca++, NH4+ in superficial water, and Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (s(r)), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%.     

Findings of national proficiency test exercise for the determination of trace elements in edible mushroom reference material

This paper presents the results of the proficiency test exercise conducted in Pakistan for the determination of trace elements in mushroom reference material. Thirteen laboratories from different organizations of the country submitted trace elemental data on Al, As, Br, Ca, Cd, Ce, Cl, Co, Cr, Cs, Cu, Fe, Hg, K, Li, Mg, Mn, Na, P, Pb, Rb Sc, Si, Sm, Sr, Th, Zn. Results for Al, As, Br, Ca, Cd, Cl, Co, Cr, Cs, Cu, Fe, K, Mg, Mn, Na, Rb Sc, and Zn, in the mushroom material were reported by two or more participating laboratories and could be subjected to statistical evaluation. The original data of these trace elements was subjected to a computer program “Histo Version 2.1” provided by IAEA. The four outlier tests, i.e., Dixon, Grubbs, skewness and kurtosis were applied to the data sets. Consensus (overall) mean values, absolute standard deviation, relative standard deviation, standard error, median and range of values for these elements have been reported at a significance level of 0.05.     

Senio river ecosystem: characterization and distribution of inorganic species in water and sediments

Analytical results are reported for the determination of inorganic species in water and sediments sampled in the Senio river ecosystem. The species determined are Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg, F-, Cl-, Br, NO3-, SO4-, Na+, K+, Ca++, Mg++, NH4+ in integrated water, and Cu, Pb, Cd, Zn, Co, Cr, Ni, Fe, Mn, Hg in sediments. For all the elements, in addition to detection limits, precision and accuracy are given: the former, expressed as relative standard deviation (sr), and the latter, expressed as relative error (e), were good, being in all cases lower than 6%. Limitedly to Cu, Pb, Cd and Zn a critical comparison with voltammetric measurements is also discussed.     

Comparative instrumental multi-element analysis I: Comparison of ICP source mass spectrometry with ICP atomic emission spectrometry, ICP atomic fluorescence spectrometry and atomic absorption spectrometry for the analysis of natural waters from a granite region

Summary Multi-element analysis by ICP source mass spectrometry for practically matrix-free natural waters, coming from a granitic area and, therefore, rich in trace elements, has been compared with ICP-atomic emission, ICP atomic fluorescence and atomic absorption spectrometry. The following elements have been investigated and their concentrations are in the decreasing order: Ca, Si, Na, Mg, K, Al; Sr, Mn, Ba, Fe, Rb, Zn, B, U, Y, Li, La, Be, Cs, Co, Cr, V, Sb, Bi, Th, Cu, Cd, Ni, Se, Pb, As, Hg, Mo, Tl, Sn. The concentration ranges were between 10 ppm and <0.01 ppb.As a measure of agreement between the different methods under investigation, two criteria have been used (a) the relative variation coefficient VK (%) of the mean element concentration of an element, determined by different methods in all the 98 water samples and (b) the linear, logarithmic and Spearman rank correlation coefficients between ICP-MS and each of the other methods. Detection limits are given from literature for about 32 elements using different methods.The elements Ca, Na, Mg, K, Mn, Sr, Zn, Fe, Li, Cu have been determined with ICP-MS, ICP-AES and AAS; Al, Ba with ICP-MS and ICP-AES; Si only with ICP-AES, whereas B, Be, Bi, Co, Cr, Cs, Hg, La, Mo, Ni, Pb, Rb, Sb, Sn, Th, Tl, U, V, Y only with ICP-MS. In all 34 of the investigated 36 elements could be analysed by ICP-MS, 14 (from about 20 possible) by AAS, 13 by ICP-AES and 12 by ICP-AFS.The agreement between ICP-MS and ICP-AES as well as between ICP-MS and AAS in most cases is remarkably good according to (a). VK (%) for each element in 98 water samples is in the range from ±2.6 to 10% for Na, Mg, Ca, K, Fe, Sr, Ba, Cu, Li (increasing order). Cd and Zn have unexpectedly higher values (±17.3 and ±20.5%); Cd concentrations are, however, near the detection limit.Comparing the different methods on the basis of correlation coefficients according to (b), gives for the Spearman rank correlation coefficient over the whole range of concentrations, respectively for ICP-MS/ICP-AES, AAS, ICP-AFS in case of Ca: 0.998; 0.984; 0.899; Na: 0.993; 0.991; 0.978; Mg: 0.997; 0.993; 0.959; K: 0.986; 0.942; 0.677; Al: 0.987; -; -; Fe: 0.864; 0.974; 0.701; Mn: 0.989; 0.990; 0.198; Sr: 0.988; 0.992; -; Zn: 0.894; 0.819; 0.300; Cu: -; 0.977; 0.202; Li: -; 0.907; 0.586.It is evident from these trace element concentrations as well as the electrical conductivities, that only about three fourths of the investigated samples are typical granitic waters and the remaining ones are associated with different geological background. The samples have been mainly radon waters with more than 18 nCi/l of Rn-222.

---

Vergleichende Instrumentelle Multielementanalyse I: Vergleich von ICP-Massenspektrometrie mit ICP-Atomemissionsspektrometrie, ICP-Atomfluorescenzspektrometrie und Atomabsorptionsspektrometrie zur Analyse natürlicher Wässer aus einem Granitgebiet

---

6th Contribution to the principles of trace analysis of elements and radionuclides

---

Dedicated to Professor Dr. H. Kelker, Frankfurt, on the occasion of his 65th birthday