Controllable preparation of nanoparticle-coated chitosan microspheres in a co-axial microfluidic device

In this work, we describe a novel and simple microfluidic method for fabricating nanoparticle-coated chitosan microspheres. Uniform droplets of aqueous chitosan solution were dispersed into an oil phase containing partially hydrophilic nanoparticles via a co-axial microfluidic device. Recirculating flow in the continuous phase in the area between drops enhanced mixing and allowed the nanoparticles to coat the surface of the droplets as they passed through the channel. The chitosan droplets were then crosslinked with glutaraldehyde and nanoparticle-coated microspheres were obtained. SEM characterization shows that the microspheres are monodispersed with uniform nanoparticle distribution on the surface. The dispersity, size and composition of the microspheres could all easily be controlled by changing the microfluidic flow parameters and three different types of nanoparticles were successfully used to synthesize hybrid microspheres to demonstrate the method's versatility.     

Forced desorption of nanoparticles from an oil-water interface

While nanoparticle adsorption to fluid interfaces has been studied from a fundamental standpoint and exploited in application, the reverse process, that is, desorption and disassembly, remains relatively unexplored. Here we demonstrate the forced desorption of gold nanoparticles capped with amphiphilic ligands from an oil-water interface. A monolayer of nanoparticles is allowed to spontaneously form by adsorption from an aqueous suspension onto a drop of oil and is subsequently compressed by decreasing the drop volume. The surface pressure is monitored by pendant drop tensiometry throughout the process. Upon compression, the nanoparticles are mechanically forced out of the interface into the aqueous phase. An optical method is developed to measure the nanoparticle area density in situ. We show that desorption occurs at a coverage that corresponds to close packing of the ligand-capped particles, suggesting that ligand-induced repulsion plays a crucial role in this process.     

Bacterial Imprinting at Pickering Emulsion Interfaces

The tendency of bacteria to assemble at oil–water interfaces can be utilized to create microbial recognition sites on the surface of polymer beads. In this work, two different groups of bacteria were first treated with acryloyl‐functionalized chitosan and then used to stabilize an oil‐in‐water emulsion composed of cross‐linking monomers that were dispersed in aqueous buffer. Polymerization of the oil phase followed by removal of the bacterial template resulted in well‐defined polymer beads bearing bacterial imprints. Chemical passivation of chitosan and cell displacement assays indicate that the bacterial recognition on the polymer beads was dependent on the nature of the pre‐polymer and the target bacteria. The functional materials for microbial recognition show great potential for constructing cell–cell communication networks, biosensors, and new platforms for testing antibiotic drugs.     

Double-layer interaction between parallel solid cylinders partially immersed in an oil/water interface

We consider two identical, parallel, infinitely long solid cylinders at a given separation, lying flat on a plane oil/water interface and both immersed to the same extent in the oil and water phases. The part of the surface of each cylinder in contact with the aqueous phase is charged, forming an electric double layer in a symmetrical aqueous binary electrolyte. The electrical potential in the overlapping electric double layers in the aqueous phase satisfies the Poisson-Boltzmann equation. The potentials within the uncharged interiors of the solid cylinders and in the oil phase satisfy Laplace's equation. The equations for the three potentials are solved simultaneously using the finite element method with Galerkin weighted residuals. The double-layer interaction per unit length of the cylinders is then calculated. Of the numerical results obtained, three deserve special mention. First, a short-range double-layer repulsion, decaying exponentially with separation between the two cylinders, acts through the aqueous electrolyte medium, whereas in the case of an uncharged oil/water interface a weaker, but much longer-ranging, repulsive interaction acts through the oil medium. Second, reasonable estimates of the short-range interaction between cylinders in a planar interface can be obtained from the Derjaguin approximation for thin double layers. Third, in addition to the repulsive force between the cylinders parallel to the oil/water interface, a force normal to the interface acts on the cylinders in the direction of the aqueous electrolyte phase.     

单分散壳聚糖微囊的制备与表征

对水溶性壳聚糖和对苯二甲醛在水/油界面发生的交联反应进行了研究,考察了水相溶液的pH值和油相中对苯二甲醛的浓度对该界面交联反应的影响.采用微流控技术制备得到了单分散的壳聚糖微囊:首先通过毛细管同轴聚焦流微流控装置制备得到单分散的O/W/O乳液.乳液制备中,以Pluronic F-127作为水相乳化剂,羟乙基纤维素作为水相增稠剂,水溶性壳聚糖溶于中间水相;交联剂对苯二甲醛溶于内部油相;含乳化剂PGPR 90的大豆油作为外部油相.乳液制备完成后,以乳液为模板,对苯二甲醛通过油/水界面扩散进入水层,与壳聚糖的氨基发生交联反应,生成壳聚糖聚合物凝胶网络,从而构成微囊的囊壁.通过光学显微镜分析和扫描电镜观察发现:微囊具备良好的单分散性和球形度以及尺寸均一的内部空腔,微囊的囊壁致密无孔.所得单分散微囊在药物传递等领域具备潜在的应用价值.     

Formation of a liquid crystalline phase from phosphatidylcholine at the oil-aqueous interface

Adsorption of phospholipid (1,2-dioleoyl-sn-glycero-3-phosphatidylcholine) and formation of a surface phase at the oil-water interface has been followed by using ellipsometry. The properties of the interfacial phase were found to depend strongly on whether phospholipid was added to the oil phase or to the aqueous phase as liposomal structures. In the latter case a monolayer formed, while if the phospholipid was supplied from the oil phase a lamellar phase appeared at the interface. The effect on the stabilizing surface phase of a surface-active protein (beta-lactoglobulin) was also investigated. The observations are important for understanding stabilizing properties of surface-active compounds commonly used to stabilize emulsions. In addition it has been demonstrated that ellipsometry can be used to study the initial process when a two-phase system consisting of a water and an oil phase is transformed into a three phase system or eventually to a one-phase system.     

Stepwise synthesis of giant unilamellar vesicles on a microfluidic assembly line

Among the molecular milieu of the cell, the membrane bilayer stands out as a complex and elusive synthetic target. We report a microfluidic assembly line that produces uniform cellular compartments from droplet, lipid, and oil/water interface starting materials. Droplets form in a lipid-containing oil flow and travel to a junction where the confluence of oil and extracellular aqueous media establishes a flow-patterned interface that is both stable and reproducible. A triangular post mediates phase transfer bilayer assembly by deflecting droplets from oil, through the interface, and into the extracellular aqueous phase to yield a continuous stream of unilamellar phospholipid vesicles with uniform and tunable size. The size of the droplet precursor dictates vesicle size, encapsulation of small-molecule cargo is highly efficient, and the single bilayer promotes functional insertion of a bacterial transmembrane pore.     

不同体系中油酸甲酯与烷基苯磺酸盐协同效应研究

研究了表面活性剂/盐/模拟油体系与表面活性剂/碱/模拟油体系中油酸甲酯与表面活性剂协同效应机理.结果表明两种体系中协同效应机理不同.在盐体系中,油酸甲酯主要通过改变油相的等效烷烃碳数(EACN) 影响表面活性剂在油水相分配.而碱体系中,油酸甲酯影响表面活性剂在油水相分配从而影响界面张力；另一方面,油酸甲酯吸附在界面上顶替表面活性剂分子影响界面张力.对于不同结构表面活性剂,两种作用竞争的结果不同.     

Effect of charged colloidal particles on adsorption of surfactants at oil-water interface

A change of oil/water interfacial tension in the presence of cationic or anionic surfactants in an organic phase was observed due to the addition of charged fine solids in the aqueous phase. The charged fine solids in the aqueous phase adsorb surfactants diffused from the oil phase, thereby causing an increase in the bulk equilibrium surfactant concentration in the aqueous phase, governed by the Stern-Grahame equation. Consequently, surfactant adsorption at the oil-water interface increases, which was demonstrated from the measured reduction of the oil-water interfacial tension. The increased surfactant partition in the aqueous phase in the presence of the charged particles was confirmed by the measured decrease in the surface tension for the collected aqueous solution after solids removal, as compared with the cases without solids addition.     

New types of self-organizing interfacial alginate membranes

In this publication we describe a new self-association process, which leads to the formation of ultra-thin alginate layers at the interface between oil and water. The water phase contains a highly dilute solution of sodium alginate. These macromolecules are negatively charged and they are not surface active. The oil phase contains a small concentration of positively charged surfactants. At the interface between oil and water, the cationic surfactants tend to form complexes with the negatively charged alginate polyelectrolytes in the aqueous solutions. This leads to striking adsorption processes of the solved polysaccharide molecules at the oil-water interface. Upon the addition of calcium ions, a cross-linking process sets in and one obtains the thin viscoelastic membranes, which are anchored at the interface between oil and water. The thickness of these membranes is of the order of 0.2 mm. Similar structures can also be formed by solving positively charged Gemini surfactants in the oil phase. In this case, the cationic surfactant molecules induce the adsorption processes of alginate macromolecules, and they also act as cross-linking compounds. In a series of experiments, we measured the surface rheological properties of these ultra-thin alginate membranes. The results of these investigations point to the presence of electrostatically stabilized membranes. Special interest was given to the influence of the guluronate content of the alginates, which is important for the cross-linking mechanism according to the egg-box model. Finally, this article finishes with the discussion of the proposed building mechanisms of these membranes.     

Effect of silica particles on stability of highly concentrated water-in-oil emulsions with non-ionic surfactant

Water-in-oil, high internal phase emulsion made of super-cooled aqueous solution containing a mixture of inorganic salts and stabilized with non-ionic surfactant (sorbitan monooleate) alone was investigated. It was not possible to produce a highly concentrated emulsion (with aqueous phase fraction = 94 wt %), stabilized with surface-treated silica, solely: we were able to form an emulsion with a maximal aqueous phase mass fraction of 85 wt % (emulsion inverts/breaks above this concentration). The inversion point is dependent on the silica particle concentration, presence of salt in the aqueous phase, and does not depend on the pH of the dispersed phase. All emulsions stabilized by the nanoparticles solely were unstable to shear. So, the rheological properties and stability of the emulsions containing super-cooled dispersed phase, with regards to crystallization, were determined for an emulsion stabilized by non-ionic surfactant only. The results were compared to the properties obtained for emulsions stabilized by surface treated (relatively hydrophobic) silica nanoparticles as a co-surfactant to sorbitan monooleate. The influence of the particle concentration, type of silica surface treatment, particle/surfactant ratio on emulsification and emulsion rheological properties was studied. The presence of the particles as a co-stabilizer increases the stability of all emulsions. Also, it was found that the particle/surfactant ratio is important since the most stable emulsions are those where particles dominate over the surfactant, when the surfactant’s role is to create bridging flocculation of the particles. The combination of the two types of hydrophobic silica particles as co-surfactants is: one that resides at the water/oil interface and provides a steric boundary and another that remains in the oil phase creating a 3D-network throughout the oil phase, which is even more beneficiary in terms of the emulsion stability.     

Emulsification of caraway essential oil in water by lecithin and β-lactoglobulin: emulsion stability and properties of the formed oil–aqueous interface

The stability and droplet size of protein and lipid stabilised emulsions of caraway essential oil as well as the amount of protein on the emulsion droplets have been investigated. The amount of added protein (β-lactoglobulin) and lipid (phosphatidylcholine from soybean (sb-PC)) were varied and the results compared with those obtained with emulsions of a purified olive oil. In general, emulsions with triglyceride oil proved to be more stable compared with those made with caraway essential oil as the dispersed phase. However, the stability of the emulsions can be improved considerably by adding sb-PC. An increase in the protein concentration also promoted emulsion stability. We will also present how ellipsometry can be used to study the adsorption of the lipid from the oil and the protein from the aqueous phase at the oil–water interface. Independently of the used concentration, close to monolayer coverage of sb-PC was observed at the caraway oil–aqueous interface. On the other hand, at the olive oil–aqueous interface, the presence of only a small amount of sb-PC lead to an exponential increase of the layer thickness with time beyond monolayer coverage. The amounts of β-lactoglobulin adsorbed at the caraway oil–aqueous interface and at the olive oil–aqueous interface were similar, corresponding roughly to a protein monolayer coverage.     

Synthesis of titania-silica core-shell microspheres via a controlled interface reaction in a microfluidic device

In this work, we describe a novel, simple microfluidic method for fabricating titania-silica core-shell microspheres. Uniform droplets of silica sol were dispersed into an oil phase containing tetrabutyl titanate via a coaxial microfluidic device. The titanium alkoxide hydrolyzed at the water-oil interface after the formation of the aqueous droplets. A gel shell containing the titanium hydroxide formed around the droplets, and the titania-silica core-shell microspheres were obtained after calcinations. The X-ray diffraction results show that titania coatings crystallized into a pure anatase structure. The scanning electron microscopy and energy-dispersive spectrometry characterization shows that the microspheres are monodispersed with uniform titania coating on the surface. The dispersity and size of the microspheres could easily be controlled by changing the microfluidic flow parameters. The titania content on the surface could be adjusted in the large range of 1.0-98.0 mol % by varying the continuous phase composition and the reaction time, and the structures of the core-shell microshperes could also be controlled.     

Electrically driven motion of an air bubble on hemispherical oil/water interface by three-phase boundary reactions

Our electrochemical cell consisted of a ferrocene-included hemispherical nitrobenzene (NB) droplet on the glassy carbon (GC) electrode which was immersed in the aqueous solution including sodium sulfate and sodium dodecyl sulfate (SDS). When an air bubble was injected near the boundary between the oil and the aqueous phase, it stayed at the top of the hemisphere on the boundary so that the lower half of the bubble was put in oil and the other half was in water. From the force balance of surface tension and buoyancy of the bubble, the bubble took an energetic minimum at the interface. It sank into the oil phase when ferrocene in the oil was electrochemically oxidized through the GC electrode by the three-phase boundary reaction. The electrochemical reduction caused the bubble to move back toward the aqueous phase. The motion of the bubble was synchronized with the redox reaction of ferrocene. The potential step oxidation showed such a rapid response that the motion could not be attributed to diffusion of ferricenium ion from the three-phase boundary to the bubble. Our idea of explaining the rapidity was the translational motion of the SDS layer along the boundary, which was driven by the difference in the surface concentration of SDS caused by the electrochemical generation of the ferricenium ion. The motion of the SDS layer was demonstrated by the shrinkage of the oil layer spread on the water surface when SDS solution was dropped on the oil layer. The spreading velocity was close to the velocity of propagating the oxidation of ferrocene to the bubble.     

Spontaneous emulsification at oil–water interface by tetraalkylammonium chloride

Water droplets were formed spontaneously at the interface of the 2-nitrophenyloctyl ether and aqueous phases on the oil phase side when the oil contained tetraalkylammonium chloride without surfactants. The droplets, less than some micrometers in diameter, gathered at the interface. The number density of the droplets was proportional to the concentration of tetraethylammonium chloride, and hence this salt should be responsible for the formation of the droplets as a surfactant. When positive voltage was applied to the aqueous phase against the oil, the droplets departed from the interface toward the oil bulk. The droplets should be negatively charged by chloride. The adsorption model of the salt was suggested, in which chloride is immobilized at the interface on the aqueous side electrostatically with tetraethylammonium ion on the oil side.     

Phase behavior of amphiphiles at liquid crystals/water interface: A coarse-grained molecular dynamics study

We present a coarse-grained molecular dynamics simulation study of phase behavior of amphiphilic monolayers at the liquid crystal （LC）/water interface. The results revealed that LCs at interface can influence the lateral ordering of amphiphiles. Particularly, the amphiphile tails along with perpendicularly penetrated LCs between tails undergo a two-dimension phase transition from liquid-expanded into a liquid-condensed phase as their area density at interface reaches 0.93. While, the liquid-condensed phase of the monolayer never appears at oil/water interface with isotropic shape oil particles. These findings reveal the penetration of anisotropic LC can promote ordered lateral organization of amphiphiles. Moreover, we find the phase transition point is shifted to lower surface coverage of amphiphiles when the LCs have larger affinity to the amphiphile tails.     

Studies of Synergism/Antagonism in Sodium Alkyl Benzene Sulfonate/Methyl Oleate Model Oil Systems

Experimental studies are conducted in order to elucidate the mechanisms responsible for synergism/antagonism for lowering interfacial tension in alkyl benzene sulfonate/brine/methyl oleate model oil and alkyl benzene sulfonate/alkali/methyl oleate model oil systems. We found that different mechanisms exist in above two systems. In alkyl benzene sulfonate/brine/methyl oleate model oil systems, methyl oleate influences the partition of added surfactants between oil and aqueous phase by changing equivalent alkane carbon number (EACN) value of model oil. In alkyl benzene sulfonate/alkali/methyl oleate model oil systems, methyl oleate in oil phase has two functions: on the one hand, it influences the partition of surfactant between oil and aqueous phase; on the other hand, it directly affects IFT by displacing surfactant molecule or forming mixed film with surfactant molecule at the interface.     

Fluorescence evidence that a phase transition causes the induction time in the reduction in dynamic tension during surfactant adsorption to a clean air/water interface and a kinetic-diffusive transport model for the phase-induced induction

An aqueous soluble surfactant adsorbing from solution onto an initially clean air/water interface often exhibits an induction period in the surface tension relaxation in which, as the adsorption begins, the tension remains near the clean interface value for an extended period of time before decreasing rapidly to the equilibrium value. In this study, using a model nonionic soluble surfactant, C14E6(CH3(CH2)13-(OCH2CH2)6-OH), we present direct fluorescence evidence that this induction is due to a first-order phase transition from a gaseous (G) to a liquid expanded (LE) phase that the assembling monolayer undergoes at constant surface pressure. An open channel flow cell is initially filled with water, and onto its air/water interface is spread an insoluble amphiphilic dye that fluoresces upon irradiation in the LE phase and whose fluorescence is quenched in the G phase. An aqueous solution of C14E(6) is then allowed to flow through the channel. We observe the immediate appearance of bright islands of the LE phase growing in a dark (G) background, confirming the presence of the G/LE phase transition. These islands eventually occupy the entire surface, after which the interface remains uniformly bright. We correlate this phase transition to the induction period by simultaneously measuring the tension of the interface of the open channel, and verifying that as the islands grow the tension remains at the clean value until the bright LE phase occupies the entire surface, whereupon the tension rapidly decreases. We further develop a phase transition surfactant transport model for the induction period in which surfactant diffuses toward and kinetically adsorbs onto the surface, and then rapidly equilibrates between the G and LE phases. For our model surfactant C14E6, we independently measure the surface concentration of the nucleating LE phase, the LE phase surfactant equation of state, the kinetic rate constants for adsorption into the LE phase, and the bulk diffusion coefficient. Using these measurements, we predict induction times for adsorption onto a clean surface without convection. We also measure these induction times in tension relaxation for adsorption onto a pendant bubble using axisymmetric shape analysis, and demonstrate agreement with the simulations with no adjustable constants.     

A kinetic and thermodynamic study on hydrolysis of sodium laurate in aqueous phase accompanied by transfer into oil phases containing different organic additives (I)

The kinetic and thermodynamic behavior at the interface between an aqueous solution of sodium laurate (NaLA) and various oil phases comprised primarily of benzene (Bz) and/or different organic compounds including amphiphiles has been investigated in regard to the hydrolysis of NaLA accelerated at the interface, transfer of lauric acid (LA) into oil phase and reverse transfer of Bz into aqueous phase in addition to interface tension. The contact of aqueous NaLA solution with the oil phase was found to accompany the mass transfer of LA and simultaneously promote the hydrolysis of NaLA in water phase. Analysis of the change of OH⁻ ion concentration ([OH⁻]) over time allowed us to treat the events as a first order reaction. From the rate constant data the activation parameters such as the activation enthalpy and entropy, both of which control the transfer of LA molecules, were determined. The parameters were found to depend greatly on varied situations of the oil phase, being clearly able to explain the physicochemical behavior of the interface. Comparing the cases where the oil phase is one of the respective single systems such as Bz, dodecane (C₁₂) and dodecylbenzene (C₁₂Bz), C₁₂Bz resulted in the lowest rate constant. The transfer (or hydrolysis) rate was measured for the amphiphile-added oil systems as a function of amphiphile concentration. When 0.206 M C₁₆OHBz came in contact with aqueous phase, emulsion formation at the interface layer was brought about with approximately zero activation enthalpy, leading to facile or spontaneous transfer of LA. In addition, UV absorbance representing the transfer of Bz from the oil phase to the aqueous phase also demonstrated the effects of added amphiphiles on the action of the interface.     

A novel method to quantify the amount of surfactant at the oil/water interface and to determine total interfacial area of emulsions

We present a methodology to quantitatively determine the fraction of sodium dodecyl sulfate (SDS) that partitions to the oil/water interface in oil-in-water macroemulsions and calculate the total interfacial area (TIA) through the novel use of filtration through nanoporous membranes. Ultrafiltration was carried out in centrifuge tubes having nanoporous filters with a 30,000 molecular weight cutoff (MWCO), so that emulsion droplets would not pass through, and only SDS (as monomers and micelles) that is in the bulk water phase (i.e., not at the interface) could pass through. The concentration of SDS in the filtrate was determined and used to calculate the TIA for each system. The mean droplet diameter of the emulsions was measured by light scattering. We analyzed the effects of total SDS concentration and oil chain length on the amount of SDS that partitions to the interface, the TIA, and the droplet diameter. The results showed that partitioning of SDS to the oil/water interface increases with increasing total SDS concentration in emulsion systems (i.e., the more SDS we add to the bulk solution, the more SDS partitions to the oil/water interface). However, the surface-to-bulk partition coefficient (i.e., the SDS concentration at the interface divided by the SDS concentration in the aqueous phase) remains the same over the entire concentration range (8-200 mM). The results showed a chain-length compatibility effect in that the minimum amount of SDS partitioned to the interface for C(12) oil. The droplet size measurements revealed a maximum size of droplets for C(12) oil. Penetration of oil molecules into SDS film at the interface has been proposed to account for the maximum droplet size and minimum partitioning of SDS at the oil/water interface for C(12) oil+SDS emulsion system. The TIA, as determined from our ultrafiltration method, was consistently two orders of magnitude greater than that calculated from the droplet size measured by light scattering. Possible explanations for this disparity are discussed.