Quantum chemical investigation of the reaction of O(3 P 2) with certain hydrocarbon radicals

The reaction of ground-state atomic oxygen [O(³ P ₂)] with methyl, ethyl, n-propyl and isopropyl radicals has been studied using the density functional method and the complete basis set model. The energies of the reactants, products, reaction intermediates and various transition states as well as the reaction enthalpies have been computed. The possible product channels and the reaction pathways are identified in each case. In the case of methyl radical the minimum energy reaction pathway leads to the products CO + H₂ + H. In the case of ethyl radical the most facile pathway leads to the products, methanal + CH₃ radical. For propyl radical (n- and iso-), the minimum energy reaction pathways would lead to the channel containing ethanal + methyl radical.     

The Studies of Free Radical Cyclization Reactions Mediated by Sulfonyl Chloride (II)

A study on the free radical cyclization reaction of substituted 1,6-dienes mediated by p-toluenesulfonyl chloride is described.     

Synthesis of poly(4-vinylbenzocyclobutene) and its reaction with dienophiles

4-Vinylbenzocyclobutene ( 1 ) was prepared by the nickel-catalyzed coupling reaction of 4-bromobenzocyclobutene with vinylbromide in 70% yield. Radical homopolymerization of 1 at 60°C for 24 h afforded poly(4 vinylbenzocyclobutene) [poly( 1 )] in 89% yield and radical copolymerizations of 1 with styrene (St) or methyl methacrylate (MMA) were carried out to obtain the corresponding copolymers. The Q = 1.07, e = 0.046. As a model reaction of the polymer reaction of the polymer reaction of poly( 1 ) and poly(4-vinylbenzocyclobutene-co-styrene) [copoly( 1 -St)] with dienophiles, the Diels-Alder reaction of benzocyclobutene with N-phenylmaleimide (MI) or maleic anhydride (MANH) was carried out to determine the optimum reaction conditions. Under the optimum condition, the Diels-Alder reaction of poly( 1 ) and copoly( 1 -St) with MI and MANH in the presence of 4-tert-butyl-catechol as an inhibitor were carried out to yield the corresponding polymers in good yields. The properties (solubilities, T_g, and temperature of 10% weight loss) of the products obtained from the polymer reaction were different from these of poly( 1 ). © 1995 John Wiley & Sons, Inc.     

Investigation of nitroxide radical coupling reaction in wide temperature range and different catalyst system

The effect of temperature, catalyst system, and the structure of bromine connected groups on the nitroxide radical coupling (NRC) reaction is investigated in details. A series of polymers with different bromine connected groups as poly (tert‐butyl acrylate) (PtBA‐Br), polystyrene (PS‐Br), and poly (methyl methacrylate) (PMMA‐Br) are prepared by atom transfer radical polymerization first, then the bromine‐containing polymers were coupled with 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy‐containing poly(ε‐caprolactone) (PCL‐TEMPO) in different catalyst systems as CuBr/PMDETA, Cu⁰/PMDETA and CuBr/Cu⁰/PMDETA in the temperature range from 90 °C to 25 °C. The result shows that the catalyst system of CuBr/Cu⁰/PMDETA is the best one for NRC reaction, in which the NRC reaction could be conducted in high efficiency in the wide temperature range from room temperature to high temperature. The efficiency of NRC reaction between PtBA‐Br and PCL‐TEMPO is more than 85% in the temperature range from 25 to 75 °C, the efficiency between PS‐Br and PCL‐TEMPO is more than 90% from 25 to 90 °C, and the efficiency between PMMA‐Br and PCL‐TEMPO is more than 90% only at the room temperature. The effect of bromine connected groups on the NRC reaction is discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2991–2999, 2010     

EPR Studies of (3, 5-di-t-Butyl-0-Benzoquinone) Tetracarbonylrhenium(0) Radical

The organometallic radical: (3,5-di-t-butyl-0-benzoquinone)tetracarbonyl-rhenium(0) and its triphenylphosphine substituted derivatives were studied by EPR spectroscopy. The unpaired electron is shown to be localized in the organic 1,2-diketone ligand. The rate of carbonyl substitution by triphenylphosphine at the unsubstituted rhenium radical indicates a second order reaction. The activation parameters are ΔH* =19.1±0.8Kcal/mole and ΔS*-3.0±1.5 eu/mole.     

A vacuum ultraviolet photoionization time-of-flight mass spectrometer with high sensitivity for study of gas-phase radical reaction in a flow tube

Photoionization mass spectrometry as a powerful analytical method has been widely utilized and provided valuable insight in the field of gas-phase reactions. Here, a highly sensitive vacuum ultraviolet (VUV) photoionization time-of-flight mass spectrometer combined with a microwave discharge generator and a fast flow tube reactor has been developed to study radical reactions of atmospheric and combustion interests. Two kinds of continuous light sources, the tunable VUV synchrotron radiation at Hefei, China for isomer-specific product detection and a commercial krypton discharge lamp for time-consuming kinetic measurements, are employed as photoionization sources in the apparatus. A multiplexed detection with high sensitivity (the limit of detection ∼0.8 ppb) and high mass resolution (M/ΔM ∼ 2100) has been approached. As representative examples, the self-reaction of the methyl radical, CH₃, and the reaction of the methyl radical with molecular oxygen are studied and multiple species including reactive radicals and isomeric/isobaric products are detected and identified. In addition, some preliminary results related to the reaction kinetics are also presented.     

On the Dissociation of Aromatic Radical Anions in Solution

A new theoretical formulation is given for the reaction rate and path for the important reaction class of aromatic radical anion dissociation in solution [Ar? X]^?.→Ar^.+X^?, and is illustrated for the case of the cyanochlorobenzene radical anion [CN? Φ? Cl]^?. in dimethylformamide. Among the theory's novel features is the inclusion of the conical intersection aspect of this ground electronic state problem, which is key in allowing the reaction to occur and which has a significant impact on the reaction barrier height. Reasonable agreement with the experimental rate is found.     

Degradable multisegmented polymers synthesized by consecutive radical addition‐coupling reaction of α,ω‐macrobiradicals and nitroso compound

A consecutive radical addition‐coupling reaction induced by spin‐trapping agent is applied to produce degradable multisegmented polymer using α,ω‐dibromo polymer as a precursor. The macroradical generated by single electron transfer process catalyzed by Cu/PMDETA from α,ω‐dibromo polymer can be efficiently captured by 2‐methyl‐2‐nitrosopropane (MNP), which results in nitroxide radical. The in situ formed nitroxide radical immediately undergoes cross‐coupling reaction with polymeric radical, generating block polymer bridged with alkoxyamine moiety. The consecutive radical addition‐coupling reaction generates multisegmented polymer via step‐growth mechanism. Different multisegmented polymers have been prepared from α,ω‐dibromo‐PS, PtBA, and PtBA‐PS‐PtBA. The block number of multisegmented polymers can be tailored by varying the feed ratio of α,ω‐dibromo precursor to MNP. The multisegmented polymer can be degraded in the presence of hydrogen atom donor or air, and the molecular weight distribution transformed back into shape of its original precursor as it is conjugated by alkoxyamine moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of amphiphilic ABC triblock copolymers by single electron transfer nitroxide radical coupling reaction in tetrahydrofuran

A series of ABC triblock copolymers, that is, polyisoprene‐block‐polystyrene‐block‐poly(ethylene oxide) (PI‐PS‐PEO), PI‐block‐poly(tert‐butyl acrylate)‐block‐PEO (PI‐PtBA‐PEO), and PI‐block‐poly(acrylic acide)‐block‐PEO (PI‐PAA‐PEO) were obtained by combination of anionic technique, atom transfer radical polymerization (ATRP), and single electron transfer nitroxide coupling (SETNRC) reaction. Anionic polymerization of isoprene followed by end capping with ethylene oxide yielded hydroxyl‐terminated PI. After esterification, PI with Br end group was used as a macroinitiator to initiate the polymerization of styrene and tBA by ATRP that was then trapped by 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group in PEO by SETNRC reaction rapidly with high efficiency in tetrahydrofuran at room temperature. The effect of reaction time and polymer chain length on SETNRC reaction was discussed in detail. In the presence of Cu⁰/tris[2‐(dimethylamino)ethyl]amine, SETNRC between PI‐PS‐Br and PEO‐TEMPO was carried out with the efficiency of up to 91.6% in 2 h. With the increase in polymer chain length, the efficiency decreased fleetly. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anion radical formation in the reaction of chloranilic acid with n-methylpiperidine in acetonitrile

Reaction of chloranilic acid with N-methylpiperidine in acetonitrile has been studied. The product of the reaction is an unusually stable anion radical of quinone. The presence of radicals has been confirmed by EPR measurements. Stability constant, extinction coefficients and thermodynamic reaction parameters are reported. Mechanism of the reaction is proposed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Rapid Interception of CnF2n+1(O)SO. Radical with Copper-Based Carbene: A Novel Access to Perfluoroalkanesulfinate Ester

In this communication, an unprecedented interception of C_nF_2n+1(O)SO^. radical with a copper-based carbene has been established. Distinguished by wide substrate scopes and mild reaction conditions, this novel radical–carbene coupling reaction (RCC reaction) provides a fundamentally different and mechanistically interesting strategy for the synthesis of perfluoroalkanesulfinate esters.     

A Simple Way for Synthesis of Alkyne-Telechelic Poly(methyl methacrylate) via Single Electron Transfer Radical Coupling Reaction

The telechelic α,ω‐alkyne‐poly(methyl methacrylate) (alkyne‐PMMA‐alkyne) was synthesized by single electron transfer radical coupling (SETRC) reaction of α‐alkyne, ω‐bromine‐poly(methyl methacrylate) (alkyne‐ PMMA‐Br). The propargyl 2‐bomoisobutyrate (PgBiB) was first prepared to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate at 45°C using CuCl/1,1,4,7,10,10‐hexamethyl triethylenetetramine (HMTETA) as homogeneous catalytic system. Then the SETRC reaction was conducted at room temperature in the presence of nascent Cu(0) and N,N,N′,N′ ′,N′ ′‐pentamethyldiethyllenetriamine (PMDETA). The precursor alkyne‐PMMA‐Br and coupled product alkyne‐PMMA‐alkyne were characterized by GPC and ¹H NMR in detail.     

A density functional theory study on the atmospheric reaction of CH3O2 with HS: Mechanism and kinetics

The reaction mechanism of CH₃O₂ and HS was systematically investigated by density functional theory (DFT). Six singlet pathways and seven triplet ones are located on the potential surface (PES). The result indicates that the main products are CH₃O and HSO both on the singlet and triplet PES, different from the CH₃O₂ + OH reaction. Moreover, deformation density (ρ_def) and atoms in molecules (AIM) analyses were carried out to further uncover the nature of chemical bonding evolution in the primary pathways. Furthermore, reaction rate constants were calculated in the temperature range from 200 to 1000 K using the transition state theory with the Wigner and Eckart tunneling corrections. Our results can shed light on the title reaction and offer instructions for analogous atmospheric reactions, as well as experimental research in the future.     

Computational study of TNT synthesis in solvated nitration reaction systems

Mononitrotoluene (MNT) was incorporated into solvated reaction systems and was subjected to subsequent nitration (electrophilic and free radical substitution) to obtain corresponding dinitrotoluene (DNT) and trinitrotoluene (TNT) products. In the electrophilic nitration system, the energy barrier of the reaction to produce o,p‐dinitrotoluene from p‐nitrotoluene was found to decrease from 62.7 to 14.7 kJ/mol to 9.2 kJ/mol in solventless, hydrated, and methanol‐solvated molecular reaction systems, respectively. Further nitration to produce TNT in related solventless and solvated systems also led to a stepwise decreasing trend in the required energy, from 297.6 to 118.6 kJ/mol to 42.8 kJ/mol. Comparative synthesis using ·NO₂ as the nitrating reagent to obtain o,p‐DNT or TNT in the hydrated system shows a lower reaction energy barrier than that of the same reaction in the solventless system. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Remote C(sp3)−H Arylation and Vinylation of N-Alkoxypyridinium Salts to δ-Aryl and δ-Vinyl Alcohols

The reaction of readily available and bench-stable N-alkoxypyridinium salts with arylboronic and vinylboronic acids afforded δ-aryl and δ-vinyl alcohols, respectively, in the presence of fac-Ir(ppy)₃ and Cu(OTf)₂ dual catalysts. The reaction takes place through a domino process involving the reductive generation of alkoxyl radicals, 1,5-hydrogen atom transfer (1,5-HAT) and the copper-catalyzed cross-coupling reaction of the resulting translocated carbon radicals with boronic acids. Complementary to the Minisci reaction, this method allows for the arylation of nucleophilic alkyl radicals with both electron-rich and electron-poor arenes under mild reaction conditions.     

Direct Synthesis of Benzofuro[2,3‐b]pyrroles through a Radical Addition/[3,3]‐Sigmatropic Rearrangement/Cyclization/Lactamization Cascade

A straightforward synthetic method for the construction of benzofuro[2,3‐b]pyrrol‐2‐ones by a novel domino reaction through a radical addition/[3,3]‐sigmatropic rearrangement/cyclization/lactamization cascade has been developed. The domino reaction of O‐phenyl‐conjugated oxime ether with an alkyl radical allows the construction of two heterocycles with three stereogenic centers as a result of the formation of two C?C bonds, a C?O bond, and a C?N bond in a single operation, leading to pyrrolidine‐fused dihydrobenzofurans, which are not easily accessible by existing synthetic methods. Furthermore, asymmetric synthesis of benzofuro[2,3‐b]pyrrol‐2‐one derivatives through a diastereoselective radical addition reaction to a chiral oxime ether was also developed.     

Preparation of fluorinated methacrylate/clay nanocomposite via in‐situ polymerization: Characterization,structure, and properties

Novel fluorinated coating containing well‐dispersed silicate nanolayers is successfully produced via in‐situ free radical polymerization of 2,2,2‐trifluoroethyl methacrylate in the presence of vinylbenzyl‐functionalized montmorillonite with different loading. The organic modification of sodium montmorillonite is achieved through an ion exchange reaction with triphenylvinylbenzylphosphonium chloride as surfactant prepared before use by reaction with vinylbenyl chloride and phosphine. The following in‐situ polymerization in the presence of organomodified clay leads to fluorinated nanocomposites with of partially exfoliated and intercalated morphologies, as determined via XRD and TEM analysis. The nanoscale dispersion of clay layers is also evidenced by thermal analysis; a moderate decrease of the glass transition temperature about 2–8 °C compared to their virgin PMATRIF and an improvement of their thermal stability as evidenced by TGA. The wettability of the nanocomposite films is also studied by contact angle measurements with water. The incorporation of organomodified clays not only increases the hydrophobicity of the fluorinated polymers but also improves the surface properties of obtained nanocomposites. Compared the virgin homopolymer, the mechanical properties of the nanocomposites are reduced by addition of organomodifed clay at temperature from 30 to 60 °C, whereas this trend is gradually decreased at higher temperature. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 411–418     

Synthesis and radical polymerization of 2-vinyldibenzothiophene

A monomer having dibenzothiophene moiety, 2-vinyldibenzothiophene (1), was prepared by the Ni-catalyzed cross-coupling reaction of vinyl bromide with the Grignard reagent of 2-bromodibenzothiophene. The radical homopolymerization of 1 and the copolymerization with styrene were carried out at 60°C in toluene (1.0M) for 20 h using AIBN (5 mol %) as an initiator to obtain the corresponding polymers in high yields. Thermal analyses of the copolymers showed that both 10% weight loss and glass transition temperatures increase when increasing the content of 1 unit. The monomer reactivity ratio was evaluated as r₁ = 2.55 (1) and r₂ = 0.16 (styrene). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2813–2819, 1997     

Bis(ketenyl)benzenes: preparation,observation, and reaction with tetramethylpiperidin-1-yloxyl

1,2- and 1,3-Bis(ketenyl)benzenes formed by double dehydrochlorination and by double Wolff rearrangement, respectively, gave ketenyl IR absorption at 2115, and 2122, and 2116 cm^–1, respectively. Reaction of these bisketenes with the aminoxyl radical tetramethylpiperidin-1-yloxyl (TEMPO) gave the corresponding tetraadducts as mixtures of meso- and d,l-isomers. The kinetics of the reaction of 1,3-bis(ketenyl)benzene with TEMPO gave a rate constant comparable to that of the monoketene PhCH=C=O. The reactions proceed by the initial attack of TEMPO on the carbonyl carbon of one ketenyl group followed by fast capture of the intermediate radical by a second TEMPO, and then reaction of the remaining ketene.     

The role of hydrogen atoms in CIDNP effects in the reaction of diisobutylaluminum hydride with CCl4

Integral polarization of chloroform, methylene dichloride, and pentachloroethane was observed in the¹H NMR spectra during the exothermal reaction of a 1M solution of Bu₂ ⁱ in 1,4-dioxane with CCI₄. CIDNP was shown to appear in the diffusion radical pair of the hydrogen atom and trichloromethyl radical. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2097–2099, October, 1998.