Controlling nanoparticle formation via sizable cages of supramolecular soft materials

We present a new generic strategy to fabricate nanoparticles in the "cages" within the fibrous networks of supramolecular soft materials. As the cages can be acquired by a design-and-production manner, the size of nanoparticles synthesized within the cages can be tuned accordingly. To implement this idea, both selenium and silver were chosen for the detailed investigation. It follows that the sizes of selenium and silver nanoparticles can be controlled by tuning the pore size of the fiber networks in the material. When the concentration of the gelator is high enough, monodisperse nanoparticles can be prepared. More interestingly, the morphology of the nanoparticles can be altered: silver disks can be formed when the concentrations of both the gelator and silver nitrate are sufficiently low. As the fiber network serves as a physical barrier and semisolid support for the nanoparticles, the stability in the aqueous media and the ease of application of these nanoparticles can be substantially enhanced. This robust surfactant-free approach will not only allow the controlled fabrication of nanoparticles, but also can be applied to the fabrication of composite materials for robust applications.     

Engineered protein cages for nanomaterial synthesis

Self-assembled particles of genetically engineered human L subunit ferritin expressing a silver-binding peptide were used as nanocontainers for the synthesis of silver nanoparticles. The inner cavity of the self-assembled protein cage displays a dodecapeptide that is capable of reducing silver ions to metallic silver. This chimeric protein cage when incubated in the presence of silver nitrate exhibits the growth of a silver nanocrystal within its cavity. Our studies indicate that it is possible to design chimeric cages, using specific peptide templates, for the growth of other inorganic nanoparticles.     

铂纳米粒子和锰卟啉修饰的聚苯胺新材料的制备及表征

借助循环伏安电化学聚合制备了聚苯胺(PANi)/MnT1239卟啉复合材料,再利用还原恒电位沉积法负载铂纳米粒子(Pt NP),最终制备了聚苯胺/MnT1239卟啉/铂纳米粒子复合材料.电沉积铂之后聚苯胺/MnT1239卟啉材料发生明显样貌变化,棒状结构平均直径从90 nm增加到200 nm,材料具有较大的表面积,空间可负载性好.铂纳米粒子平均尺寸在20 nm,附着均匀,氧化峰电流在0.2 V处达到7.4 mA,电化学性能优良.     

Positive Allosteric Control of Guests Encapsulation by Metal Binding to Covalent Porphyrin Cages

The allosteric control of the receptor properties of two flexible covalent cages is reported. These receptors consist of two zinc(II) porphyrins connected by four linkers of two different sizes, each incorporating two 1,2,3-triazolyl ligands. Silver(I) ions act as effectors, responsible for an on/off encapsulation mechanism of neutral guest molecules. Binding silver(I) ions to the triazoles opens the cages and triggers the coordination of pyrazine or the encapsulation of N,N′-dibutyl-1,4,5,8-naphthalene diimide. The X-ray structure of the silver(I)-complexed receptor with short connectors is reported, revealing the hollow structure with a cavity well-defined by two eclipsed porphyrins. Rather unexpectedly, the crystallographic structure of this receptor with pyrazine as a guest molecule showed that the cavity is occupied by two pyrazines, each binding to the zinc(II) porphyrin in a monotopic fashion.     

Synthesis and Solution Studies of Silver(I)‐Assembled Porphyrin Coordination Cages

The synthesis and the characterization of two porphyrin coordination cages are reported. The design of the cage formation is based on the coordination of silver(I) ions to the pyridyl units of 3‐pyridyl appended porphyrins. ¹H/¹⁰⁹Ag NMR spectroscopy, and diffusion‐ordered spectroscopy (DOSY) experiments demonstrate that both the free base porphyrin 2H‐TPyP and the Zn‐porphyrin Zn‐TPyP form the closed cages, [ Ag₄(2H‐TPyP)₂ ]⁴⁺ and [ Ag₄(Zn‐TPyP)₂ ]⁴⁺, respectively, upon addition of two equivalents of Ag⁺. The complexation processes are characterized in details by means of absorption and emission spectroscopy in diluted CH₂Cl₂ solutions. The data are discussed in the frame of the point‐dipole exciton coupling theory; the two porphyrin monomers, in fact, experience a rigid face‐to‐face geometry in the cages and a weak inter‐porphyrin exciton coupling. An intermediate species is observed, for Zn‐TPyP , in a porphyrin/Ag⁺ stoichiometric ratio of about 1:0.5 and is tentatively ascribed to an oblique open form. The occurrence of a photoinduced electron‐transfer reaction within the cages is excluded on the basis of the experimental outcomes and thermodynamic evaluations. Photophysical experiments evidence different reactivities of singlet and triplet excited states in the assemblies. A lower fluorescence quantum yield and triplet formation is discussed in relation to the constrained geometry of the complexes. Unusually long triplet excited state lifetimes are measured for the assemblies.     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Strong emitting sol–gel materials based on interaction of luminescence dyes and lanthanide complexes with silver nanoparticles

We show here how luminescence of fluorescent dyes and lanthanide complexes in sol–gel matrix can be intensified as a result of interaction of the species with silver nanoparticles. Preparation of silver nanoparticles in sol–gel composite precursor is outlined and their structural characterization are presented. Zirconia-glymo and Glymo-polyurethane-silica were used as host matrices for silver nanoparticles and the fluorescence species. The intensification of fluorescence was demonstrated by steady state spectroscopy.     

Ultrafast nonlinear optical response of Ag nanoparticles embedded in mesoporous thin films

Highly dispersed silver nanoparticles embedded in mesoporous thin films (MTFs) have been synthesized by modification of the interior surface of mesoporous silica with ethylenediamine moieties, which provided the coordination sites for the Ag ions, and subsequent reduction under hydrogen atmosphere. TEM observations show the mesoporous parent films have effectively controlled the growth of the synthesized silver nanoparticles. The composite films had an ultrafast nonlinear response time, as fast as 200 fs, and a third-order nonlinear optical susceptibility of 0.94 × 10^?10 esu, which was enhanced by the local field enhancement effect that was present when the silver nanoparticles were embedded in the surrounding dielectric matrix. The origin of the ultrafast nonlinear response and the enhanced nonlinearity of the composite films are attributed to the intraband transition of the free electrons near the Fermi surface of the incorporated silver nanoparticles.     

Structure and electrophysical properties of self-organized composite layers based on peptide and silver nanoparticles

Atomic force microscopy, scanning tunnel microscopy, and IR spectroscopy are employed to study composite films formed from dispersions of silver nanoparticles in an aqueous solution of Asp-Glu-Val-Asp-Trp-Phe-Asp peptide on different substrates at room temperature. It is established that pure peptide crystallizes on substrates to yield different structures, the character of which essentially depends on the chemical nature of a substrate, method of its pretreatment, and solution pH. When films are formed from dispersions containing both silver nanoparticles and peptide, globular structures are formed, in which individual nanoparticles are included into a peptide matrix. It is established that, during the reduction of silver ions and stabilization of resulting nanoparticles, peptide bonds are partly ruptured and another isomeric form (cisconfiguration) of peptide molecules is realized in the silver nanoparticle dispersion in its solution. Distributions of the surface potential and local tunnel voltage-current characteristics are measured for the composite layers. The voltage-current characteristics of all examined composite layers are essentially nonlinear. It is established that the charge transfer in the composite and pure peptide layers is carried out via the Poole-Frenkel mechanism and the Schottky overbarrier emission, respectively.     

Green synthesis of antibacterial chitosan films loaded with silver nanoparticles

An eco-friendly chemical reduction method was successfully used for the preparation of chitosan (CTS) composite films loaded with silver nanoparticles (AgNPs) by self assembly method using poly(ethylene glycol) as both reducing and stabilizing agent. UV-Vis spectra of the prepared chitosan loaded silver nanoparticles (CTSLAg) films reveal that full reduction of silver ions to silver nanoparticles takes place at 90 °C. The effect of reaction conditions on the silver nanoparticles formation was investigated using UV-Vis spectrophotometer. The morphology of the films was tested by scanning electron microscopy (SEM). The DSC curves showed that the CTSLAg film had a favorable compatibility and heat stability. AgNPs were confirmed by XRD and UV-Vis spectroscopy. The TEM findings revealed that the silver nanoparticles synthesized were spherical in shape with uniform dispersal, and by increasing CTS:PEG ratio larger silver nanoparticles could be obtained. The results of antibacterial study reveal that the prepared nanocomposite films exhibited potential inhibition.     

Immobilization of silver nanoparticles obtained by electric discharge method on a track membrane surface

Composite poly(ethylene terephthalate) track membranes containing immobilized silver nanoparticles with the aim of using them for surface-enhanced Raman scattering spectroscopy have been obtained and studied. A dispersion of negatively charged silver nanoparticles has been synthesizes by the method of pulsed electrical discharge between silver electrodes immersed in distilled water. To ensure the electrostatic deposition of nanoparticles onto the track membrane surface, it has been modified with polyethyleneimine. The composition and morphology of the surface of the obtained composite membranes have been studied by X-ray photoelectron spectroscopy and scanning electron microscopy. Aggregation of nanoparticles on the surface has been analyzed. The coefficient of Raman-scattering enhancement has been determined by the example of rhodamine 6G molecules adsorbed on a membrane with immobilized silver nanoparticles.     

Sonochemical immobilization of silver nanoparticles on porous polypropylene

Silver nanoparticles were immobilized on the surface of polypropylene (PP) porous beads by an ultrasound‐assisted reduction method. The structure and properties of the silver–PP composite were characterized with XRD, TEM, HRSEM, EDX, XPS, and Raman spectroscopy. Water‐soluble polymers such as PEG, PVA, and PVP were used as stabilizing agents for preventing the agglomeration of the silver nanoparticles. With PVP, a homogeneous distribution of silver nanocrystals, 50 nm in size, on the PP surface was achieved. The mechanism proposed for the silver anchoring to the inert polymer accounts for a localized melting of the PP. The beads of the silver PP composite demonstrated good stability and high antibacterial activity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1719–1729, 2008     

Facile synthesis of silver core - silica shell composite nanoparticles

Combining metal nanoparticles and dielectrics (e.g. silica) to produce composite materials with high dielectric constant is motivated by application in energy storage. Control over dielectric properties and their uniformity throughout the composite material is best accomplished if the composite is comprised of metal core - dielectric shell structured nanoparticles with tunable dimensions. We have synthesized silver nanoparticles in the range of 40-100nm average size using low concentration of saccharide simultaneously as the reducing agent and electrostatic stabilizer. Coating these silver particles with silica from tetraalkoxysilanes has different outcomes depending on the alcoholic solvent and the silver particle concentration. A common issue in solution-based synthesis of core-shell particles is heterogeneous nucleation whereupon two populations are formed: the desired core-shell particles and undesired coreless particles of the shell material. We report the formation of Ag@SiO(2) core-shell particles without coreless silica particles as the byproduct in 2-propanol. In ethanol, it depends on the silver surface area available whether homogeneous nucleation of silica on silver is achieved. In methanol and 1-butanol, core-shell particles did not form. This demonstrates the significance of controlling the tetraalkoxysilane hydrolysis rate when growing silica shells on silver nanoparticles.     

Reduction of oxygen at a NaX-Ag composite electrode and its application to the determination of oxygen in aqueous media

A composite mixture Ag-NaX zeolite (silver concentration 16.7% w/w) is synthesized usingim-pregnation and thermal decomposition. For silver impregnation, a solution of an Ag acetylacetonate complex in acetone was used. Despite the quantity of silver applied was substantially less than it would be necessary to fill the inner pore space in the zeolite completely, some part of silver formed nanocrystallites and nanoparticles giving rise to a novel composite material. The composite powder was uniformed with soot (10% w/w) and applied onto a mirror-smooth graphite surface used as an electrode matrix. The reduction of oxygen on such a surface proceeded with activity comparable to that observed on the most active planes of the silver single crystal, Ag(100).     

Self-assembly and optical properties of water-soluble porphyrin alternating CdSe nanoparticulate films

A new type of self-assembled film was prepared by alternating deposition of oppositely charged meso-tetra-(4-trimethylaminophenyl) porphyrin nickel iodide (NiTAPPI) and citrate-stabilized CdSe nanoparticles. The stepwise deposition process was monitored by means of UV–vis spectroscopy. The interaction between the porphyrin and CdSe nanoparticles was characterized with UV–vis and fluorescence spectra. The SEM images showed the formation of densely packed two-dimensional array and the conversion of disorder-to-order of CdSe nanoparticles on the quartz substrate modified by PDDA when depositing positively charged NiTAPPI. The self-assembled film placed in ambient air exhibited significant enhancement of fluorescence intensity. The effects of heat treatment and UV-light irradiating on fluorescence properties of the composite films were investigated in details.     

Synthesis of one-dimensional silver oxide nanoparticle arrays and silver nanorods templated by Langmuir monolayers

One-dimensional (1D) silver oxide nanoparticle arrays were synthesized by illuminating the composite Langmuir-Blodgett monolayers of porphyrin derivatives/Ag(+) and n-hexadecyl dihydrogen phosphate (n-HDP)/Ag(+) deposited on carbon-coated copper grids with daylight and then exposing them to air. Transmission electron microscopy (TEM) observation shows that the nanoparticle size is around 3 nm, with the separation of about 2-3 nm. High-resolution TEM (HRTEM) investigation indicates that the particles are made up of Ag(2)O. Ag nanorods with the width of 15-35 nm and the length of several hundreds of nanometers were synthesized by irradiating the composite Langmuir monolayers of porphyrin derivatives/Ag(+) and n-HDP/Ag(+) by UV-light directly at the air/water interface at room temperature. HRTEM image and selected-area electron diffraction (SAED) pattern indicate that the nanorods are single crystals with the (110) face of the face-centered cubic (fcc) silver parallel to the air/water interface. The formation of the 1D arrays and the nanorods should be attributed to the templating effect of the linear supramolecules formed by porphyrin derivative or n-HDP molecules in Langmuir monolayers through non-covalent interactions.     

A photoelectrochemical device with a nanostructured SnO2 electrode modified with composite clusters of porphyrin-modified silica nanoparticle and fullerene

A silica nanoparticle has been successfully employed as a nanoscaffold to self-organize porphyrin and C60 molecules on a nanostructured SnO2 electrode. The quenching of the porphyrin excited singlet state on the silica nanoparticle is suppressed significantly, showing that silica nanoparticles are promising scaffolds for organizing photoactive molecules three-dimensionally in nanometer scale. Marked enhancement of the photocurrent generation was achieved in the present system compared with the reference system, where a gold core was employed as a scaffold of porphyrins instead of a silica nanoparticle. The rather small incident photon-to-current efficiency relative to a similar photoelectrochemical device using a silica microparticle may result from poor electron and hole mobility in the composite film due to poor connection between the composite clusters of a porphyrin-modified silica nanoparticle and C60 in micrometer scale.     

Preparation of antibacterial polyimide films containing silver nanoparticles

Polyimide/silver composite films were successfully prepared by in situ polymerization. A precursor, AgNO₃ was used as the source of the silver nanoparticles. The structure and morphology of resulting films were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Consequently, the silver nanoparticles were well dispersed in polyimide matrix. Meanwhile, thermal properties from thermal gravimetric analyses (TGA) and mechanical properties from tensile test which confirmed composites were kept good performance as compared to pure polyimide. In addition, the antimicrobial activity of polyimide/silver composite films against three different bacteria, B. subtilis, S. aureus, and E. coil, illustrated excellent activity. This composite is potential useful as antimicrobial material with good thermal performance in a wide variety of biomedical and general use applications.     

利用还原性多糖合成银纳米粒子

利用还原性多糖为稳定剂、AgNO₃为前驱物, 通过一条绿色途径合成银纳米粒子, 并探讨了纳米粒子的形成机理. 对多糖高浓度时制得的复合物在空气与氮气气氛下进行了热处理, 分别得到了银的大孔海绵体与银纳米粒子/碳的复合材料. 对产物进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见分光光度(UV-vis)以及BET吸附表征.