Synergistic Modulation of In-Situ Hybrid Interface Construction and pH Buffering Enabled Ultra-Stable Zinc Anode at High Current Density and Areal Capacity

In aqueous electrolytes, the uncontrollable interfacial evolution caused by a series of factors such as pH variation and unregulated Zn²⁺ diffusion would usually result in the rapid failure of metallic Zn anode. Considering the high correlation among various triggers that induce the anode deterioration, a synergistic modulation strategy based on electrolyte modification is developed. Benefitting from the unique pH buffer mechanism of the electrolyte additive and its capability to in situ construct a zincophilic solid interface, this synergistic effect can comprehensively manage the thermodynamic and kinetic properties of Zn anode by inhibiting the pH variation and parasitic side reactions, accelerating de-solvation of hydrated Zn²⁺, and regulating the diffusion behavior of Zn²⁺ to realize uniform Zn deposition. Thus, the modified Zn anode can achieve an impressive lifespan at ultra-high current density and areal capacity, operating stably for 609 and 209 hours at 20 mA cm⁻², 20 mAh cm⁻² and 40 mA cm⁻², 20 mAh cm⁻², respectively. Based on this exceptional performance, high loading Zn||NH₄V₄O₁₀ batteries can achieve excellent cycle stability and rate performance. Compared with those previously reported single pH buffer strategies, the synergistic modulation concept is expected to provide a new approach for highly stable Zn anode in aqueous zinc-ion batteries.     

Hydrophobic Organic-Electrolyte-Protected Zinc Anodes for Aqueous Zinc Batteries

Aqueous Zn batteries are promising energy-storage devices. However, their lifespan is limited by irreversible Zn anodes owing to water decomposition and Zn dendrite growth. Here, we separate aqueous electrolyte from Zn anode by coating a thin MOF layer on anode and filling the pores of MOF with hydrophobic Zn(TFSI)₂-tris(2,2,2-trifluoroethyl)phosphate (TFEP) organic electrolyte that is immiscible with aqueous Zn(TFSI)₂–H₂O bulk electrolyte. The MOF encapsulated Zn(TFSI)₂-TFEP forms a ZnF₂-Zn₃(PO₄)₂ solid electrolyte interphase (SEI) preventing Zn dendrite and water decomposition. The Zn(TFSI)₂-TFEP@MOF electrolyte protected Zn anode enables a Zn||Ti cell to achieve a high average Coulombic efficiency of 99.1 % for 350 cycles. The highly reversible Zn anode brings a high energy density of 210 Wh kg⁻¹ (of cathode and anode mass) and a low capacity decay rate of 0.0047 % per cycle over 600 cycles in a Zn||MnO₂ full cell with a low capacity ratio of Zn:MnO₂ at 2:1.     

Manipulating Electric Double Layer Adsorption for Stable Solid-Electrolyte Interphase in 2.3 Ah Zn-Pouch Cells

Constructing a reliable solid-electrolyte interphase (SEI) is imperative for enabling highly reversible zinc metal (Zn⁰) electrodes. Contrary to conventional “bulk solvation” mechanism, we found the SEI structure is dominated by electric double layer (EDL) adsorption. We manipulate the EDL adsorption and Zn²⁺ solvation with ether additives (i.e. 15-crown-5, 12-crown-4, and triglyme). The 12-crown-4 with medium adsorption on EDL leads to a layer-structured SEI with inner inorganic ZnF_x/ZnS_x and outer organic C−O−C components. This structure endows SEI with high rigidness and strong toughness enabling the 100 cm² Zn||Zn pouch cell to exhibit a cumulative capacity of 4250 mAh cm⁻² at areal-capacity of 10 mAh cm⁻². More importantly, a 2.3 Ah Zn||Zn_0.25V₂O₅⋅n H₂O pouch cell delivers a recorded energy density of 104 Wh L_cell⁻¹ and runs for >70 days under the harsh conditions of low negative/positive electrode ratio (2.2 : 1), lean electrolyte (8 g Ah⁻¹), and high-areal-capacity (≈13 mAh cm⁻²).     

Amphoteric Cellulose-Based Double-Network Hydrogel Electrolyte Toward Ultra-Stable Zn Anode

Zinc (Zn) metal anode suffers from uncontrollable Zn dendrites and parasitic side reactions at the interface, which restrict the practical application of aqueous rechargeable zinc batteries (ARZBs). Herein, an amphoteric cellulose-based double-network is introduced as hydrogel electrolyte to overcome these obstacles. On one hand, the amphoteric groups build anion/cation transport channels to regulate electro-deposition behavior on Zn (002) crystal plane enabled by homogenizing Zn²⁺ ions flux. On the other hand, the strong bonding between negatively charged carboxyl groups and Zn²⁺ ions promote the desolvation process of [Zn(H₂O)₆]²⁺ to eliminate side reactions. Based on the above two functions, the hydrogel electrolyte enables an ultra-stable cycling with a cumulative capacity of 7 Ah cm⁻² at 20 mA cm⁻²/20 mAh cm⁻² for Zn||Zn cell. This work provides significant concepts for developing hydrogel electrolytes to realize stable anode for high-performance ARZBs.     

Engineering Fluorine-rich Double Protective Layer on Zn Anode for Highly Reversible Aqueous Zinc-ion Batteries

The high thermodynamic instability and side reactions of Zn-metal anode (ZMA), especially at high current densities, greatly impede the commercialization of aqueous zinc-ion batteries (AZIBs). Herein, a fluorine-rich double protective layer strategy is proposed to obtain the high reversibility of AZIBs through the introduction of a versatile tetradecafluorononane-1,9-diol (TDFND) additive in aqueous electrolyte. TDFND molecule with large adsorption energy (−1.51 eV) preferentially absorbs on the Zn anode surface to form a Zn(OR)₂⁻ (R=−CH₂−(CF₂)₇−CH₂−) cross-linking complex network, which balances space electric field and controls the Zn²⁺ ion flux, thus enabling the uniform and compact deposition of Zn (002) crystal planes. Meanwhile, TDFND with low Lowest unoccupied molecular orbital (LUMO, 0.10 eV) energy level is priorly decomposed to regulate the interfacial chemistry of ZMA by building a ZnF₂-rich solid electrode/electrolyte interface (SEI) layer. It is found that a 14 nm-thick SEI layer delivers excellent structural integrity to suppress parasitic reactions by blocking the direct contact of active water and ZMA. Consequently, the Zn electrode exhibits a superior cycling life over 430 h at 10 mA cm⁻² and a high average Coulombic efficiency of 99.8 % at 5 mA cm⁻². Furthermore, a 68 mAh pouch cell delivers 80.3 % capacity retention for 1000 cycles.     

Bio-Inspired Polyanionic Electrolytes for Highly Stable Zinc-Ion Batteries

For zinc-ion batteries (ZIBs), the non-uniform Zn plating/stripping results in a high polarization and low Coulombic efficiency (CE), hindering the large-scale application of ZIBs. Here, inspired by biomass seaweed plants, an anionic polyelectrolyte alginate acid (SA) was used to initiate the in situ formation of the high-performance solid electrolyte interphase (SEI) layer on the Zn anode. Attribute to the anionic groups of −COO⁻, the affinity of Zn²⁺ ions to alginate acid induces a well-aligned accelerating channel for uniform plating. This SEI regulates the desolvation structure of Zn²⁺ and facilitates the formation of compact Zn (002) crystal planes. Even under high depth of discharge conditions (DOD), the SA-coated Zn anode still maintains a stable Zn stripping/plating behavior with a low potential difference (0.114 V). According to the classical nucleation theory, the nucleation energy for SA-coated Zn is 97 % less than that of bare Zn, resulting in a faster nucleation rate. The Zn||Cu cell assembled with the SA-coated electrode exhibits an outstanding average CE of 99.8 % over 1,400 cycles. The design is successfully demonstrated in pouch cells, where the SA-coated Zn exhibits capacity retention of 96.9 % compared to 59.1 % for bare Zn anode, even under the high cathode mass loading (>10 mg/cm²).     

Ordered and Fast Ion Transport of Quasi-solid-state Electrolyte with Regulated Coordination Strength for Lithium Metal Batteries

Polymer based quasi-solid-state electrolyte (QSE) has attracted great attention due to its assurance for high safety of rechargeable batteries including lithium metal batteries (LMB). However, it faces the issue of low ionic conductivity of electrolyte and solid-electrolyte-interface (SEI) layer between QSE and lithium anode. Herein, we firstly demonstrate that the ordered and fast transport of lithium ion (Li⁺) can be realized in QSE. Due to the higher coordination strength of Li⁺ on tertiary amine (−NR₃) group of polymer network than that on carbonyl (−C=O) group of ester solvent, Li⁺ can diffuse orderly and quickly on −NR₃ of polymer, significantly increasing the ionic conductivity of QSE to 3.69 mS cm⁻¹. Moreover, −NR₃ of polymer can induce in situ and uniform generation of Li₃N and LiN_xO_y in SEI. As a result, the Li||NCM811 batteries (50 μm Li foil) with this QSE show an excellent stability of 220 cycles at ≈1.5 mA cm⁻², 5 times to those with conventional QSE. LMBs with LiFePO₄ can stably run for ≈8300 h. This work demonstrates an attractive concept for improving ionic conductivity of QSE, and also provides an important step for developing advanced LMB with high cycle stability and safety.     

Manipulating OH−-Mediated Anode-Cathode Cross-Communication Toward Long-Life Aqueous Zinc-Vanadium Batteries

The anode-cathode interplay is an important but rarely considered factor that initiates the degradation of aqueous zinc ion batteries (AZIBs). Herein, to address the limited cyclability issue of V-based AZIBs, Al₂(SO₄)₃ is proposed as decent electrolyte additive to manipulate OH⁻-mediated cross-communication between Zn anode and NaV₃O₈ ⋅ 1.5H₂O (NVO) cathode. The hydrolysis of Al³⁺ creates a pH≈0.9 strong acidic environment, which unexpectedly prolongs the anode lifespan from 200 to 1000 h. Such impressive improvement is assigned to the alleviation of interfacial OH⁻ accumulation by Al³⁺ adsorption and solid electrolyte interphase formation. Accordingly, the strongly acidified electrolyte, associated with the sedated crossover of anodic OH⁻ toward NVO, remarkably mitigate its undesired dissolution and phase transition. The interrupted OH⁻-mediated communication between the two electrodes endows Zn||NVO batteries with superb cycling stability, at both low and high scan rates.     

Catalytic Chemistry Derived Artificial Solid Electrolyte Interphase for Stable Lithium Metal Anodes Working at 20 mA cm−2 and 20 mAh cm−2

A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000 hours at an ultra-high current density of 20 mA cm⁻² in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500 cycles at a current density of 1 mA cm⁻² with a capacity of 1 mAh cm⁻².     

Boosting Zn Anode Utilization by Trace Iodine Ions in Organic-Water Hybrid Electrolytes through Formation of Anion-rich Adsorbing Layers

Aqueous Zn batteries are attracting extensive attentions, but their application is still hindered by H₂O-induced Zn-corrosion and hydrogen evolution reactions. Addition of organic solvents into aqueous electrolytes to limit the H₂O activity is a promising solution, but at the cost of greatly reduced Zn anode kinetics. Here we propose a simple strategy for this challenge by adding 50 mM iodine ions into an organic-water (1,2-dimethoxyethane (DME)+water) hybrid electrolyte, which enables the electrolyte simultaneously owns the advantages of low H₂O activity and accelerated Zn kinetics. We demonstrate that the DME breaks the H₂O hydrogen-bond network and exclude H₂O from Zn²⁺ solvation shell. And the I⁻ is firmly adsorbed on the Zn anode, reducing the Zn²⁺ de-solvation barrier from 74.33 kJ mol⁻¹ to 32.26 kJ mol⁻¹ and inducing homogeneous nucleation behavior. With such electrolyte, the Zn//Zn symmetric cell exhibits a record high cycling lifetime (14.5 months) and achieves high Zn anode utilization (75.5 %). In particular, the Zn//VS₂@SS full cell with the optimized electrolyte stably cycles for 170 cycles at a low N : P ratio (3.64). Even with the cathode mass-loading of 16.7 mg cm⁻², the full cell maintains the areal capacity of 0.96 mAh cm⁻² after 1600 cycles.     

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

Ionic Liquid Electrolyte with Weak Solvating Molecule Regulation for Stable Li Deposition in High-Performance Li−O2 Batteries

Li−O₂ batteries with bis(trifluoromethanesulfonyl)imide-based ionic liquid (TFSI-IL) electrolyte are promising because TFSI-IL can stabilize O₂⁻ to lower charge overpotential. However, slow Li⁺ transport in TFSI-IL electrolyte causes inferior Li deposition. Here we optimize weak solvating molecule (anisole) to generate anisole-doped ionic aggregate in TFSI-IL electrolyte. Such unique solvation environment can realize not only high Li⁺ transport parameters but also anion-derived solid electrolyte interface (SEI). Thus, fast Li⁺ transport is achieved in electrolyte bulk and SEI simultaneously, leading to robust Li deposition with high rate capability (3 mA cm⁻²) and long cycle life (2000 h at 0.2 mA cm⁻²). Moreover, Li−O₂ batteries show good cycling stability (a small overpotential increase of 0.16 V after 120 cycles) and high rate capability (1 A g⁻¹). This work provides an effective electrolyte design principle to realize stable Li deposition and high-performance Li−O₂ batteries.     

Solvation Structure with Enhanced Anionic Coordination for Stable Anodes in Lithium-Oxygen Batteries

Li-O₂ batteries have garnered much attention due to their high theoretical energy density. However, the irreversible lithium plating/stripping on the anode limits their performance, which has been paid little attention. Herein, a solvation-regulated strategy for stable lithium anodes in tetraethylene glycol dimethyl ether (G4) based electrolyte is attempted in Li-O₂ batteries. Trifluoroacetate anions (TFA⁻) with strong Li⁺ affinity are incorporated into the lithium bis(fluorosulfonyl)imide (LiTFSI)/G4 electrolyte to attenuate the Li⁺-G4 interaction and form anion-dominant solvates. The bisalt electrolyte with 0.5 M LiTFA and 0.5 M LiTFSI mitigates G4 decomposition and induces an inorganic-rich solid electrolyte interphase (SEI). This contributes to decreased desolvation energy barrier from 58.20 to 46.31 kJ mol⁻¹, compared with 1.0 M LiTFSI/G4, for facile interfacial Li⁺ diffusion and high efficiency. It yields extended lifespan of 120 cycles in Li-O₂ battery with a limited Li anode (7 mAh cm⁻²). This work gains comprehensive insights into rational electrolyte design for Li-O₂ batteries.     

Solvation Modulation Enhances Anion-Derived Solid Electrolyte Interphase for Deep Cycling of Aqueous Zinc Metal Batteries

Stable Zn anodes with a high utilization efficiency pose a challenge due to notorious dendrite growth and severe side reactions. Therefore, electrolyte additives are developed to address these issues. However, the additives are always consumed by the electrochemical reactions over cycling, affecting the cycling stability. Here, hexamethylphosphoric triamide (HMPA) is reported as an electrolyte additive for achieving stable cycling of Zn anodes. HMPA reshapes the solvation structures and promotes anion decomposition, leading to the in situ formation of inorganic-rich solid-electrolyte-interphase. More interestingly, this anion decomposition does not involve HMPA, preserving its long-term impact on the electrolyte. Thus, the symmetric cells with HMPA in the electrolyte survive ≈500 h at 10 mA cm⁻² for 10 mAh cm⁻² or ≈200 h at 40 mA cm⁻² for 10 mAh cm⁻² with a Zn utilization rate of 85.6 %. The full cells of Zn||V₂O₅ exhibit a record-high cumulative capacity even under a lean electrolyte condition (E/C ratio=12 μL mAh⁻¹), a limited Zn supply (N/P ratio=1.8) and a high areal capacity (6.6 mAh cm⁻²).     

Regulated Ion/Electron-Conducting Interphase Enables Stable Zinc-Metal Anodes for Aqueous Zinc-Ions Batteries

Metallic Zinc (Zn) is considered as a remarkably promising anode for aqueous Zn-ion batteries due to its high volumetric capacity and low redox potential. Unfortunately, dendritic growth and severe side reactions destabilizes the electrode/electrolyte interface, and ultimately reduce the electrochemical performance. Here, an artificial protective layer (APL) with a regulated ion and electron-conducting interphase is constructed on the Zn-metal anode to provide excellent interfacial stability in high-rate cycling. The superior ionic and moderate electronic conductivity of the APL derives from the co-embedding of MXene and Zn(CF₃SO₃)₂ salts into the polyvinyl alcohol hydrogel, which enables a synergistic effect of local current density reduction during plating and ion transport acceleration during stripping for Zn anode. Furthermore, the high Young's modulus of the protective layer and dendrite-free deposition morphology during cycling suppresses hydrogen evolution reactions (2.5 mmol h⁻¹ cm⁻²) and passivation. As a result, in symmetrical cell tests, the modified battery presents a stable life of over 2000 cycles at ultra-high current density of 20 mA cm⁻². This research presents a new insight into the formation and regulation of stable electrode-electrolyte interface for the Zn-metal anode.     

Reconstruction of Solid Electrolyte Interphase with SrI2 Reactivates Dead Li for Durable Anode-Free Li-Metal Batteries

Without excess Li, anode-free Li-metal batteries (AFLMBs) have been proposed as the most likely solution to realizing highly-safe and cost-effective Li-metal batteries. Nevertheless, short cyclic life puzzles conventional AFLMBs due to anodic dead Li accumulation with a local current concentration induced by irreversible electrolyte depletion, insufficient active Li reservoir and slow Li⁺ transfer at the solid electrolyte interphase (SEI). Herein, SrI₂ is introduced into carbon paper (CP) current collector to effectively suppress dead Li through synergistic mechanisms including reversible I⁻/I₃⁻ redox reaction to reactivate dead Li, dielectric SEI surface with SrF₂ and LiF to prevent electrolyte decomposition and highly ionic conductive (3.488 mS cm⁻¹) inner layer of SEI with abundant LiI to enable efficient Li⁺ transfer inside. With the SrI₂-modified current collector, the NCM532/CP cell delivers unprecedented cyclic performances with a capacity of 129.2 mAh g⁻¹ after 200 cycles.     

Organic pH Buffer for Dendrite-Free and Shuttle-Free Zn-I2 Batteries

Aqueous Zn-Iodine (I₂) batteries are attractive for large-scale energy storage. However, drawbacks include, Zn dendrites, hydrogen evolution reaction (HER), corrosion and, cathode “shuttle” of polyiodines. Here we report a class of N-containing heterocyclic compounds as organic pH buffers to obviate these. We evidence that addition of pyridine /imidazole regulates electrolyte pH, and inhibits HER and anode corrosion. In addition, pyridine and imidazole preferentially absorb on Zn metal, regulating non-dendritic Zn plating /stripping, and achieving a high Coulombic efficiency of 99.6 % and long-term cycling stability of 3200 h at 2 mA cm⁻², 2 mAh cm⁻². It is also confirmed that pyridine inhibits polyiodines shuttling and boosts conversion kinetics for I⁻/I₂. As a result, the Zn-I₂ full battery exhibits long cycle stability of >25 000 cycles and high specific capacity of 105.5 mAh g⁻¹ at 10 A g⁻¹. We conclude organic pH buffer engineering is practical for dendrite-free and shuttle-free Zn-I₂ batteries.     

Constructing a Super-Saturated Electrolyte Front Surface for Stable Rechargeable Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries (RAZB) have been re-evaluated because of the superiority in addressing safety and cost concerns. Nonetheless, the limited lifespan arising from dendritic electrodeposition of metallic Zn hinders their further development. Herein, a metal–organic framework (MOF) was constructed as front surface layer to maintain a super-saturated electrolyte layer on the Zn anode. Raman spectroscopy indicated that the highly coordinated ion complexes migrating through the MOF channels were different from the solvation structure in bulk electrolyte. Benefiting from the unique super-saturated front surface, symmetric Zn cells survived up to 3000 hours at 0.5 mA cm⁻², near 55-times that of bare Zn anodes. Moreover, aqueous MnO₂–Zn batteries delivered a reversible capacity of 180.3 mAh g⁻¹ and maintained a high capacity retention of 88.9 % after 600 cycles with MnO₂ mass loading up to 4.2 mg cm⁻².     

A Sustainable Solid Electrolyte Interphase for High-Energy-Density Lithium Metal Batteries Under Practical Conditions

High-energy-density Li metal batteries suffer from a short lifespan under practical conditions, such as limited lithium, high loading cathode, and lean electrolytes, owing to the absence of appropriate solid electrolyte interphase (SEI). Herein, a sustainable SEI was designed rationally by combining fluorinated co-solvents with sustained-release additives for practical challenges. The intrinsic uniformity of SEI and the constant supplements of building blocks of SEI jointly afford to sustainable SEI. Specific spatial distributions and abundant heterogeneous grain boundaries of LiF, LiN_xO_y, and Li₂O effectively regulate uniformity of Li deposition. In a Li metal battery with an ultrathin Li anode (33 μm), a high-loading LiNi_0.5Co_0.2Mn_0.3O₂ cathode (4.4 mAh cm⁻²), and lean electrolytes (6.1 g Ah⁻¹), 83 % of initial capacity retains after 150 cycles. A pouch cell (3.5 Ah) demonstrated a specific energy of 340 Wh kg⁻¹ for 60 cycles with lean electrolytes (2.3 g Ah⁻¹).     

Dendrite-Free Sodium Metal Anodes Enabled by a Sodium Benzenedithiolate-Rich Protection Layer

Sodium metal is an ideal anode material for metal rechargeable batteries, owing to its high theoretical capacity (1166 mAh g⁻¹), low cost, and earth-abundance. However, the dendritic growth upon Na plating, stemming from unstable solid electrolyte interphase (SEI) film, is a major and most notable problem. Here, a sodium benzenedithiolate (PhS₂Na₂)-rich protection layer is synthesized in situ on sodium by a facile method that effectively prevents dendrite growth in the carbonate electrolyte, leading to stabilized sodium metal electrodeposition for 400 cycles (800 h) of repeated plating/stripping at a current density of 1 mA cm⁻². The organic salt, PhS₂Na₂, is found to be a critical component in the protection layer. This finding opens up a new and promising avenue, based on organic sodium slats, to stabilize sodium metals with a protection layer.