Synthesis of hindered chiral guanidine bases starting from (S)-(N,N-dialkyl-aminomethyl)pyrrolidines and BrCN

An efficient method for the preparation of hindered chiral guanidines using cyanogen bromide is described. The reaction between BrCN and vicinal diamines derived from (S)-2-(N,N-dialkyl-aminomethyl)-pyrrolidines provides chiral substituted cyanamides. The cyanamide derivatives reacted with secondary amines in hexafluoroisopropanol at reflux to form chiral hindered guanidines, which were isolated in good to excellent yields (70–96%). The chiral guanidines were prepared in an effort to design sophisticated chiral guanidine catalysts for asymmetric synthesis.     

Synthesis and characterization of new thermally stable poly(amide-imide)s based on bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic diimide and aromatic diamines

N,N′-bis-(4-carboxyphenyl)bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic diimide was prepared by reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic dianhydride with p-aminobenzoic acid in a mixture of acetic acid and pyridine (3: 2). Polycondensation of N,N′-bis-(4-carboxyphenyl)bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetracarboxylic diimide with six different aromatic diamines produced a series of new poly(amide-imide)s (PAIs) in high yields with inherent viscosities between 0.49–0.95 dl/g. All PAIs were characterized by means of elemental analysis, viscosity measurement, solubility test, FTIR spectroscopy and ¹H-NMR spectroscopy. Dynamic TGA of PAIs shows 10% weight loss temperatures from 410 to 435°C under nitrogen.     

Secondary-secondary diamine catalysts for the enantioselective Michael addition of cyclic ketones to nitroalkenes

Secondary-secondary diamines derived from S-proline are efficient catalysts for the ketone-nitroalkene Michael addition reaction. The stereoselectivity of the Michael addition is dependant on the pK_a of the N-substituted aminomethyl pendant in these diamines. N′-Aryl aminomethyl pyrrolidines provide γ-nitroketones with moderate to good enantiomeric excess (65-92%). Removal of the hydrogen-bond donor group by N-methylation results in a dramatic reduction of enantioselectivity (average ee 6%).     

Enantioselective hydrogen transfer hydrogenation on rhodium colloid systems with optically active stabilizers

Hydrogen transfer hydrogenation of acetophenone and methyl benzoylformate with 2-propanol was studied on colloidal systems obtained by reduction of rhodium complexes in the presence of optically active compounds: chiral diamines, quaternary salt (4S,5S)-(–)-N¹,N⁴-dibenzylene-2,3-dihydroxy-N¹,N¹,N⁴,N⁴-tetramethylbutane-1,4-diammonium dichloride and (8S,9R)-(–)-cinchonidine. The increase in the molar ratio modifier/Rh leads to the increase in the enantioneric excess (ee) of the reaction products. The largest ee [43.8% of (R)-1-phenylethanol and 58.2% of methyl ester of (R)-mandelic acid] were achieved for the ratios (8S,9R)-(–)-cinchonadine: Rh = 9: 1 and 3: 1, respectively. The catalyst was characterized by the high-resolution transmission electron microscopy, X-ray diffraction analysis, and thermal analysis.     

Novel optically active poly(amide-imide)s derived from L-aspartic acid

2,6-Bis-(2,5-dioxo-tetrahydro-N-(4-carboxyphenyl)pyrrol-3-yl)-pyrrolo[3,4-f]isoindole-1,3,5,7-teraone, a chiral diacid, was prepared from pyromellitic anhydride and L-aspartic acid in a three steps reaction pathway. The polycondensation reactions of the monomer with aromatic diamines were carried out in direct condensation reaction conditions. The synthesized poly(amide-imide)s had inherent viscosities in the range of 0.30–0.80 dl/g. Identification of all of the products were performed by conventional analytical techniques such as TLC, IR and ¹H NMR/¹³C MR spectroscopy. Thermoanalytical techniques (TGA/DSC) showed useful levels of thermal stability, associated with relatively high glass transition temperatures and carbonized residues in excess of 40% at 600°C for the synthesized polymers. Amorphous morphology was obtained based on XRD patterns and DSC traces. The polymers were soluble in a variety of polar organic solvents and afforded transparent and relatively flexible to brittle films by solution casting.     

Synthesis and characterization of novel heat resistant poly(amide imide)s

A series of new poly(amide imide)s was prepared from new diacid containing sulfone, ether, amide and imide groups with various aromatic diamines. The diacid was synthesized via four steps, starting from reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide afforded N-(4-hydroxy phenyl)-4-nitrobenzamide. In the second step, reduction of nitro group resulted in preparation of 4-amino-N-(4-hydroxy phenyl) benzamide. In the next step for the preparation of diamine, the reaction of 4-amino-N-(4-hydroxy phenyl) benzamide with bis-(4-chlorophenyl) sulfone in the presence of K₂CO₃ was achieved. The prepared sulfone ether amide diamine was reacted with two moles of trimellitic anhydride to synthesize related sulfone ether amide imide diacid. The precursors and final monomer were characterized by FT-IR, H-NMR and elemental analysis. Direct polycondensation reaction of the sulfone ether amide imide diacid with different diamines in the presence of triphenyl phosphite afforded five different poly (sulfone ether amide imide amide)s. The obtained polymers were fully characterized and their physical properties including thermal behavior, thermal stability, solubility, and inherent viscosity were studied.     

Synthesis of chiral 2-(anilinophenylmethyl)pyrrolidines and 2-(anilinodiphenylmethyl)pyrrolidine and their application to enantioselective borane reduction of prochiral ketones as chiral catalysts

Chiral diamines, 2-(anilinophenylmethyl)pyrrolidines and 2-(anilinodiphenylmethyl)pyrrolidine, were prepared from N-(tert-butoxycarbonyl)pyrrolidine or (S)-proline as a starting material, respectively. These chiral diamines were efficient for the catalytic enantioselective borane reduction of acetophenone. Using (S)-2-(anilinodiphenylmethyl)pyrrolidine, chiral secondary alcohols were obtained from prochiral ketones with good to excellent enantiomeric excesses (up to 98% ee).     

Structure–property relationships of ionene polymers

The synthesis of new ionenes was accomplished by the reaction of novel diamines and dihalides. A new class of crosslinkable ionenes was made possible by the synthesis of tertiary diamines with acrylate functionality, generated ultimately from diepoxides and secondary amines. Other tertiary diamines were produced by endcapping of diols with tolylene diisocyanate, followed by reaction with N,N-dimethylethanolamine and also termination of living poly(tetrahydrofuran) polymer with dimethylamine. New dihalides were produced by the opening of diepoxides with ω-bromoacids. These diamines and dihalides underwent Menschutkin reactions providing novel ionenes for structure–property relationship studies. Correlations were drawn concerning amine nucleophilicity, dihalide nucleofugascity, and molecular weight. Stress–strain and thermal data reflected the effects of ionic domains and large flexible segments in the polymers. Also considered were the electrical conductivity, moisture–vapor transmission, and oxygen permeability of these materials.     

Phenoxasilin-containing polyamides and polyesters

Silicon-containing polyamides and polyesters of a new type have been synthesized. They contain phenoxasilin rings with double-stranded structure. The polymers were synthesized by the interfacial polycondensation of 2,8-dichloroformyl-10,10-diphenylphenoxasilin with diamines and bisphenols, and were obtained in nearly quantitative yields. Their reduced viscosities were in the range of 0.53–1.47 dl g^?1 m dimethylformamide (DMF), m-cresol or chloroform. Some of the polyamides were soluble in polar aprotic solvents such as DMF and N-methyl-2-pyrrolidone (NMP) and the polyesters had good solubility in chloroform, phenol-sym tetrachloroethane (60:40 by wt %) and acidic solvents (m-cresol and nitrobenzene). The polymers hardly dissolved in cone. H₂SO₄ and some of them coloured in it. Only the polyester having sulphide bonds was soluble in benzene in addition to the above organic solvents. These polymers hardly degraded below 400° except for the polyamides derived from aliphatic diamines. The polymers from aliphatic diamines melted at 290–325°; the other polyamides and the polyesters decomposed without melting.     

Synthesis of bicyclic N,N-enaminals by cyclization of alk-4-ynals with aliphatic diamines in DMSO upon treatment with KOH

A cyclization of alk-4-ynals with aliphatic diamines in DMSO upon treatment with KOH was found to lead to bicyclic N,N-enaminals. The studies of this reaction showed that 1,3-diaminopropane and N-methyl-1,3-diaminopropane gave (E)-6-(arylmethylidene)octahydropyrrolo[1,2-a]pyrimidines in 45—78% yields, whereas 1,2-diaminoethane gave 5-(arylmethylidene)hexahydropyrrolo[1,2-a]imidazoles as mixtures of E- and Z-isomers in up to 75% total yield. The mechanism of these new cascade cyclization reactions includes formation of the equilibrium mixtures of imines and cyclic aminals with subsequent intramolecular hydroamination of the triple bond having considerable ionic character.     

Arylation of adamantanamines: V. Palladium-catalyzed amination of isomeric chloroquinolines with diamines of the adamantane series

Palladium-catalyzed arylation of diamines of the adamantane series with isomeric 2-, 4-, and 6-chloroquinoline was studied, and optimal conditions for the synthesis of the corresponding N,N′-diaryl derivatives were found. N,N-Diarylation products of primary amino groups in the diamines bearing 2-aminoethyl and 4-aminophenyl substituents were readily formed.     

Preparation of aromatic copolyesteramides by the direct polycondensation with a vilsmeier adduct derived from tosyl chloride and N,N-dimethylformamide

The reaction promoted by Vilsmeier adduct derived from tosyl chloride (TsCl) with N,N-dimethylformamide (DMF) was successfully applied to the preparation of copolyesteramides of high molecular weights directly from aromatic dicarboxylic acids, diamines, and bisphenols. The polycondensation was significantly affected by the reaction of activated dicarboxylic acids with bisphenols and diamines. Addition of a mixture of bisphenols and diamines likely caused gelation of the reaction mixtures, resulting in insoluble polymers, especially with high mol % diamines. Stepweise addition of them, however, gave the homogeneous reaction mixtures and copolymers of better solubility. These phenomena were studied in terms of sequence length distribution of polyester units, which was estimated by thermal analyses of the random copolymers prepared under various conditions for the initial reaction with bisphenols.     

New soluble, thermally stable poly(amide-imide)s containing cardo anthraquinone unit

Preparation of new types of polyimides with high thermal stability and improved solubility was considered. In this way, two new amide diamines containing bulky pendant units were prepared in two steps: nucleophilic substitution reactions of 1- and 2-aminoanthraquinone with 3,5-dinitrobenzoyl chloride to form amide containing dinitro compounds, and then reduction of resulted dinitro compounds with hydrazine monohydrate in the presence of palladium/activated carbon. Two series of new poly(amide-imide)s were prepared from the reactions of these two diamines with various dianhydrides by one step polyimidation process. All poly(amide-imide)s were characterized by FTIR and ¹H-NMR spectroscopies and elemental analysis. The polymers were obtained in high yields with inherent viscosities of 0.54-0.69 dl g⁻¹. X-ray diffraction patterns (XRD) showed that all the polymers were amorphous and therefore this factor in addition to the introduction of bulky anthraquinone group led to good solubility of the polymers in most common organic solvents especially in N-methyl-2-pyrrolidone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), and dimethylsulfoxide (DMSO). Thermal analysis showed glass transition temperature between 204 and 226 °C. Decomposition temperatures were more than 293 °C, also 10% weight loss were in the range of 387-419 °C in air.     

Efficient synthesis of chiral C2-symmetric diamines via allylboration of bis-N,N′-metallodiimines

An enantioselective synthesis of C₂-symmetric bis-homoallylic aromatic and heteroaromatic diamines in 54-89% yields, in 73-94% de and ?98% ee has been achieved via the allylboration of the corresponding N,N′-bis(trimethylsilyl)dialdimines and N,N′-bis(diisobutylalumino)dialdimines with B-allyldiisopinocampheylborane in the presence of methanol, followed by alkaline hydrogen peroxide workup. One-pot synthesis of stable N,N′-bis(benzaldimine-triethylborane) complexes and subsequent allylboration to afford benzene diamines is also described.     

New heat stable and processable poly(amide-ether-imide)s derived from 5-(4-trimellitimidophenoxy)-1-trimellitimido naphthalene and various diamines

New aromatic diimide-dicarboxylic acid having flexible ether linkage, 5-(4-trimellitimidophenoxy)-1-trimellitimido naphthalene, was synthesized by the reaction of trimellitic anhydride with 5-(4-aminophenoxy)-1-naphthylamine. Then, a series of novel aromatic poly(amide-ether-imide)s were prepared by the phosphorylation polycondensation of the synthesized monomer with various aromatic diamines. A model compound was synthesized by the reaction of the monomer with aniline. The resulting polymers with inherent viscosities of 0.43-0.70 dl/g were obtained in high yield. All new compounds including the naphthalene-based monomer, model compound, and the resulted polymers were characterized by FT-IR and NMR spectroscopic methods. The ultraviolet λ_max values of the poly(amide-ether-imide)s were also determined. The resulted polymers exhibited a good solubility in a variety of high polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), N-methyl-2-pyrrolidone (NMP), and pyridine. For some of the polymers obtained the crystallinity behavior was estimated by means of wide-angle X-ray diffraction (WXRD) method, and the resulted polymers exhibited nearly an amorphous nature. Thermal stability of the obtained polymers was determined by thermogravimetric analysis (TGA/DTG), and the 10% weight loss temperatures of the one-step degraded poly(amide-ether-imide)s were found to be in the range between 528 and 551 °C in nitrogen. From differential scanning calorimetric (DSC) analyses, the polymers showed T_gs between 276 and 307 °C. Cyclic voltammetry (CV) measurements of a typical polymer showed that they are also electrochemically stable.     

Aromatic polyisophthalamides with N-benzylidene pendant groups

A new series of modified polyisophthalamides bearing N-benzylidene pendant groups was prepared by reacting various aromatic diamines with 5-(N-benzylidene) isophthalic acid. The latter was synthesized from the reaction of 5-aminoisophthalic acid with benzaldehyde and characterized by IR and ¹H-NMR spectroscopy. Triphenyl phosphite and pyridine was used as condensing agents for preparing polyamides. In addition, the corresponding unsubstituted polyisophthalamides were prepared under identical experimental conditions for comparative purposes. Characterization of modified polyamides was accomplished by IR as well as inherent viscosity measurements. They showed a slightly lower solubility in various media than the corresponding unsubstituted polyamides. The cured modified polyamides displayed significantly higher thermal stability than the cured unsubstituted polyamides. They were stable up to 355–308°C in N₂ or air and afforded anaerobic char yield of 66–61% at 800°C. © 1992 John Wiley & Sons, Inc.     

Organocatalyzed regio- and stereoselective diamination of functionalized alkenes

The first organocatalyzed diamination reaction of alkenes with N,N-dichlorotoluenesulfonamide (TsNCl₂) and acetonitrile as nitrogen sources was reported. The catalytic diamination reaction was convenient to carry out, resulting in imidazoline products with good yields and excellent regio- and stereoselectivities. Several other organic molecules were also tried as catalyst for this reaction and good results were achieved. A new one-pot synthesis of vicinal diamines via the current PPh₃-catalyzed diamination and the hydrolysis of resulting imidazoline products with SnCl₄ as promoter was also established.     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.     

Consecutive Intermolecular Reductive Amination/Asymmetric Hydrogenation: Facile Access to Sterically Tunable Chiral Vicinal Diamines and N‐Heterocyclic Carbenes

A highly enantioselective iridium‐ or ruthenium‐catalyzed intermolecular reductive amination/asymmetric hydrogenation relay with 2‐quinoline aldehydes and aromatic amines has been developed. A broad range of sterically tunable chiral N,N′‐diaryl vicinal diamines were obtained in high yields (up to 95 %) with excellent enantioselectivity (up to >99 % ee). The resulting chiral diamines could be readily transformed into sterically hindered chiral N‐heterocyclic carbene (NHC) precursors, which are otherwise difficult to access. The usefulness of this synthetic approach was further demonstrated by the successful application of one of the chiral vicinal diamines and chiral NHC ligands in a transition‐metal‐catalyzed asymmetric Suzuki–Miyaura cross‐coupling reaction and asymmetric ring‐opening cross‐metathesis, respectively.     

Synthesis and properties of novel polytriazoleimides derived from 1,2,3‐triazole‐containing diamines and aromatic dianhydrides

A new kind of 1,2,3‐triazole‐containing aromatic diamines were synthesized by the Cu(I)‐catalyzed 1,3‐dipolar cycloaddition reaction. These diamines were employed to synthesize a series of novel polytriazoleimides (PTAIs) by polycondensation with various aromatic dianhydrides in N,N‐dimethylacetamide (DMAc) via the conventional two‐step method. The obtained polyimides were characterized by Fourier transform infrared, hydrogen‐1 nuclear magnetic resonance, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis techniques. The results show that the PTAIs are soluble in most of strong polar solvents and have inherent viscosity values of 0.47–0.68 dl/g (DMAc). PTAI films have tensile strengths of 60.6–102.6 MPa and elongations at breakage of 3.0–4.1%, glass transition temperatures (T_g) of 208–262°C, and decomposition temperatures (at 5% weight loss) of 368–401°C in N₂ atmosphere, which depend on the structure of the polymers. The PTAIs also exhibit good adhesion to copper and gas separation properties. Copyright © 2011 John Wiley & Sons, Ltd.