Photocatalytic decompositions of gaseous HCHO and methylene blue with highly ordered TiO_2 nanotube arrays

The highly ordered Ti O_2nanotubes(NTs) were fabricated by the anodic oxidation method.Their morphology,structure and crystalline phase were characterized by scanning electron microscopy(SEM) and X-ray diffractometer(XRD).The effects of morphology,specific surface area,pore structures and photocatalytic activity of the Ti O_2 NTs were investigated.UV–vis spectra analysis showed that its light absorption had been extended to the visible light range.The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic oxidation of gaseous HCHO and MB aqueous solution.The samples had better adhesion strength in the dark and showed a higher photocatalytic activity than nanoparticles.Especially,with ultraviolet light pretreatment,the nanotubes exhibited more stable active for photocatalytic decomposition and the photodecomposition rate remained at high level after 3 cycles of the photocatalysis experiment.Thus,how the number of surface active group ·OH increased and the mechanism for the great improvement for the photocatalytic activity are discussed.     

Photocatalytic decompositions of gaseous HCHO and methylene blue with highly ordered TiO2 nanotube arrays

The highly ordered Ti O₂nanotubes（NTs） were fabricated by the anodic oxidation method.Their morphology,structure and crystalline phase were characterized by scanning electron microscopy（SEM） and X-ray diffractometer（XRD）.The effects of morphology,specific surface area,pore structures and photocatalytic activity of the Ti O₂ NTs were investigated.UV–vis spectra analysis showed that its light absorption had been extended to the visible light range.The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic oxidation of gaseous HCHO and MB aqueous solution.The samples had better adhesion strength in the dark and showed a higher photocatalytic activity than nanoparticles.Especially,with ultraviolet light pretreatment,the nanotubes exhibited more stable active for photocatalytic decomposition and the photodecomposition rate remained at high level after 3 cycles of the photocatalysis experiment.Thus,how the number of surface active group ·OH increased and the mechanism for the great improvement for the photocatalytic activity are discussed.     

紫外光照射下 Fe-碳纳米管/TiO2 复合材料降解罗丹明 B

 The composites comprising Fe-carbon nanotubes (CNTs) on TiO2 were prepared by a modified sol-gel method and characterized by nitrogen adsorption, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive X-ray analysis. The photocatalytic decomposition of rhodamine B (Rh.B) under UV irradiation and air aeration catalyzed by the composites was measured. The photocatalytic activity of TiO2 nanoparticles was significantly enhanced by the large CNT network that facilitated electron transfer between adsorbed Rh.B molecules and the catalyst substrate and the simultaneous occurrence of the photo-Fenton reaction in the presence of Fe particles. A marked acceleration of the decomposition rate was observed with aeration by flowing air aeration due to the formation of the circulatory photo-Fenton system. Chemical oxygen demand of piggery waste was measured at regular intervals to evaluate the mineralization of wastewater.     

Controllable synthesis of well-ordered TiO2 nanotubes in a mixed organic electrolyte for high-efficiency photocatalysis

Well-ordered TiO 2 nanotube arrays (TNAs) were fabricated by electrochemical anodization in a mixed organic electrolyte consisting of ethylene glycol and glycerol. The morphology, structure, crystalline phase, and photocatalytic properties of TNAs were characterized by using TEM, SEM, XRD and photodegradation of methylene blue. It was found that the morphology and structure of TNAs could be significantly influenced by the anodization time and applied voltage. The obtained tube length was found to be proportional to anodization time, and the calculated growth rate of nanotubes was 0.6 m/h. The microstructure analysis demonstrated that the diameter and thickness of the nanotubes increased with the increase of anodization voltage. The growth mechanism of TNAs was also proposed according to the observed relationship between current density and time during anodization. As expected, the obtained TNAs showed a higher photocatalytic activity than the commercial TiO 2 P25 nanoparticles.     

Citric acid-assisted synthesis of nano-Ag/BiO Br with enhanced photocatalytic activity

In this study, silver nano-particles have been anchored in the surface of Bi OBr photocatalysts by a citric acid-assisted photoreduction method. The citric acid was served as a chelating and reductive agent for the preparation of Ag-decorated Bi OBr photocatalysts(named as Ag/Bi OBr-2). The as-synthesized samples were characterized by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), transmission electron microscopy(TEM), and UV-Vis diffuse reflection spectroscopy(DRS). The Ag/Bi OBr-2 photocatalyst exhibited excellent and stable photocatalytic activities on MO and phenol degradation under simulated sunlight irradiation. The enhanced photocatalytic activity could be ascribed to the smaller size, rough surface, and the surface plasma resonance(SPR) effect of Ag. Also, the Schottky junction, between the surface of the Bi OBr and silver nanoparticles, accelerated the efficient transfer and separation of photoinduced electron-hole pairs and promoted the photocatalytic performance. The active species tests indicated that the superoxide radical(·O-2) was responsible for the enhanced photocatalytic performance of Ag/Bi OBr-2. Finally, a possible photocatalytic mechanism was proposed.     

Photocatalytic Activity for Water Decomposition to Hydrogen over Nitrogen‐doped TiO2 Nanoparticle

Nitrogen-doped TiO2 nanoparticle photocatalysts were obtained by an annealing method with gaseous ammonia and nitrogen. The influence of dopant N on the crystal structure was characterized by XRD, XPS, BET, TEM and UV-Vis spectra. The results of XRD indicate that, the crystal phase transforms from anatase to rutile structure gradually with increase of annealing temperature from 300 to 700 ℃. XPS studies indicate that the nitrogen atom enters the TiO2 lattice and occupies the position of oxygen atom. Agglomeration of particles is found in TEM images after annealing. BET results show that the specific surface areas of N-doped samples from 44.61 to 38.27 m2/g are smaller than that of Degussa TiO2. UV-Vis spectra indicate that the absorption threshold shifts gradually with increase of annealing temperature, which shows absorption in the visible region. The influence of annealing condition on the photocatalytic property has been researched over water decomposition to hydrogen, indicating that nitrogen raises the photocatalytic activity for hydrogen evolution, and the modified TiO2 annealed for 2 h at 400 ℃ under gas of NH3/N2 (V/V＝1/2) mixture shows better efficiency of hydrogen evolution. Furthermore, the N-doped TiO2 nanoparticle catalysts have obvious visible light activity, evidenced by hydrogen evolution under visible light (λ＞400 nm) irradiation. However, the catalytic activity under visible light irradiation is absent for Degussa as reference and the N-doped TiO2 annealed at 700 ℃.     

Insight into Superior Visible Light Photocatalytic Activity for Degradation of Dye over Corner-truncated Cubic Ag2O Decorated TiO2 Hollow Nanofibers

Ag2O/TiO2 heterostructure has been constructed by loading corner-truncated cubic Ag2O on the TiO2 hollow nanofibers via an electrospinning-precipitation method. Compared to individual Ag2O and TiO2, Ag2O/TiO2 heterostructure exhibits obviously enhanced photocatalytic activity for the photodegradation of methyl orange(MO) under visible light irradiation. The composite with molar ratio of Ag2O to TiO2 at 4:10 exhibits the best photocatalytic performance with MO degraded 93% in 6 min. The superior activity is mainly attributed to the surface plasmon resonance(SPR) effect of metallic Ag in-situ produced during the photocatalytic process, which can favor electron transfer to the conduction band of TiO2. This leads to the efficient separation of photogenerated carriers, thus a superior photodegradation activity. Moreover, the energy band alignments of Ag2O/TiO2 heterostructure are calculated, which provides strong support for the proposed mechanism.     

TiO2纳米管负载Ag、Au、Pt纳米粒子的微波合成与表征(英)

TiO₂ nanotubes were prepared under normal pressure at a temperature of 120 ℃. Ag, Au, Pt nanoparticles supported on TiO₂ nanotubes were prepared by microwave assisted heating polyol process. TEM images showed that microwave prepared Ag, Au, Pt nanoparticles supported on TiO₂ nanotubes were small and well dispersed on the surface of the TiO₂ nanotubes. UV-Vis absorption spectra showed that the absorbance of Ag/TiO₂ nanotubes and Au/TiO₂ nanotubes in the visible light range increased greatly compared to the single titania nanotubes.     

Effect of Preparation Methods of Bi2O3 Nanoparticles on their Photocatalytic Activity

Bi2O3 nanoparticles were prepared by means of ammonia precipitation, polyol mediated methods and microemulsion chemical method. The structure and properties of the as-prepared nanoparticles, having been submitted to a heat-treatment test at 750℃, were characterized by means of XRD. BET, XPS and UV-Vis absorption techniques. The photocatalytic oxidation reactions of benzene, toluene and xylene were used as the model reaction to measure the photocatalytic activity of Bi2O3 nanoparticles, respectively. The results show that the crystallite size of Bi2O3 prepared with different methods and calcined at 750℃ were 50. 6, 38.5 and 31.5 nm, respectively. The photocatalytic activity of Bi2O3 nanoparticles prepared with the microemulsion chemical method was higher than that of the particles prepared with the polyol mediated method; and that of the particles prepared with the micromulsion chemical method was the highest among the three. The degradation rates of the three pollutants xylene, toluene and benzene decreased in sequence.     

Simple colorimetric detection of dopamine using modified silver nanoparticles

Dopamine(DA) plays an important role in health and peripheral nervous systems. Colorimetric detection of DA has the advantage of color change and simplicity in operation and instrumentation. Herein, we report a highly sensitive and selective colorimetric detection of DA by using two specific ligands modified Ag nanoparticles, where the DA molecules can make dual recognition with high specificity. The colloidal suspension of modified Ag nanoparticles was agglomerated after interacting with DA, while the color of Ag nanoparticles suspension changed from yellow to brown, arising from the interparticle plasmon coupling during the aggregation of Ag nanoparticles. The modified Ag nanoparticles suspension and agglomeration were confirmed by transmission electron microscope images. The optical properties behind the color change were thoroughly investigated by using UV-Vis and Raman techniques. The changes in p H, zeta potential, particle size and surface charge density by adding DA were also determined by using dynamic light scattering measurements. The detection limits of modified Ag probes for DA was calculated to be 6.13′10~(-6) mol L~(-1)(S/N=2.04) and the correlation co-efficient was determined to be 0.9878. Because of the simplicity in operation and instrumentation of the colorimetric method, this work may afford a feasible, fast approach for detecting and monitoring the DA levels in physiological and pathological systems.