Soft template-assisted synthesis of polyvinylpyrrolidone−functionalized nano-scale ZnO particles

ZnO was successfully prepared by the conventional synthetic route. Polyvinylpyrrolidone was used as soft-template to synthesize ZnO with controllable size and shape. It was found that ZnO was synthesized with average crystal size of 49 nm, as reported by an X-ray diffraction experiment. Scanning electron microscopy and transmission electron microscopy confirmed the hexagonal shape of the as-synthesized ZnO. The thus prepared ZnO colloidal particles exhibited numerous opportunities for numerous applications.     

Regeneration of photocatalysts by in situ UV irradiation in photocatalytic membrane reactor

ZnO was successfully prepared by the conventional synthetic route. Polyvinylpyrrolidone was used as soft-template to synthesize ZnO with controllable size and shape. It was found that ZnO was synthesized with average crystal size of 49 nm, as reported by an X-ray diffraction experiment. Scanning electron microscopy and transmission electron microscopy confirmed the hexagonal shape of the as-synthesized ZnO. The thus prepared ZnO colloidal particles exhibited numerous opportunities for numerous applications.     

ZIF-8衍生ZnO耦合HZSM-5一步催化合成气制烃醚燃料

通过水热溶剂法合成有机骨架结构材料ZIF-8,以其为前驱体调变焙烧温度制备ZnO纳米粒子。采用XRD、TEM、XPS、Raman等表征研究ZnO的组成结构及晶粒粒径形态变化;将ZnO与HZSM-5耦合形成双功能催化剂,考察其在合成气转化中的催化活性。结果表明,焙烧温度对ZnO的颗粒粒径结构影响较大,温度影响晶粒的形成速率,提高温度会促进ZnO的聚集; ZIF-8衍生ZnO通过调变温度影响ZnO晶粒粒径,起到改变产物分布的作用。当焙烧温度≤450℃时,以碳包覆ZnO纳米粒子结构存在,ZnO晶粒粒径小于20 nm,含碳ZnO耦合HZSM-5催化剂的产物以二甲醚为主;当温度≥500℃,以纯相ZnO存在,ZnO晶粒粒径皆大于20 nm,ZnO耦合HZSM-5催化剂的产物以烃类为主。ZnO与HZSM-5的耦合方式对双功能催化剂的产物选择性有显著影响。     

贵金属负载的棒状ZnO复合光催化剂的制备及其提升的光催化性能

以水热制备的ZnO纳米棒为基底,通过乙二醇液相还原法负载不同贵金属颗粒(Pt、Pd、Ru)构筑贵金属负载的ZnO纳米棒复合光催化剂。实验结果表明在制备条件相同时,Pt/ZnO样品中Pt颗粒尺寸较小,分布均匀;Pd/ZnO样品中Pd颗粒尺寸较大且团聚严重;Ru/ZnO样品则几乎没有Ru颗粒负载。在紫外光照射下降解亚甲基蓝的反应中,Pt/ZnO表现出最高的光催化性能,Pd/ZnO样品次之,而Ru/ZnO则表现出与ZnO纳米棒相似的光催化活性;表明小尺寸和大小均匀的贵金属颗粒对ZnO纳米棒的催化性能有着显著的提升作用。对Pt/ZnO来说,当Pt载量为3.2%时Pt/ZnO催化剂的光催化活性最高。     

纳米ZnO的制备及其光学性质的研究

采用均匀沉淀法，以尿素与硝酸锌反应制备纳米ZnO，通过TG-DTA、XRD、IR及TEM等手段对纳米粒子及中间体进行了表征，结果表明制得的纳米粒子粒度均匀，粒径分布窄。对纳米ZnO的发光特性研究表明，随焙烧温度升高，粒度的增大，可见绿色发射增强。同时对纳米ZnO与普通ZnO的发光性质进行了比较研究，指出纳米ZnO的绿色发光带有蓝移现象，这是由于纳米ZnO的量子尺寸效应引起的。BET测试表明，纳米ZnO的比表面为171．2m^2／g，有利于作催化剂。     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

多形态ZnO纳米粒子的制备及其紫外—可见光吸收性能研究

选用失水山梨醇单油酸酯／反应物水溶液／环己烷制成微乳液等“微反应器”，在其中控制反应，制备出了具有球形及棒状、不规则片状与球形但呈细胞器状排布的纳米氧化锌。用透射电镜（TEM）、动态激光光微射（DLLS）与X－射线衍射对产物的结构、形态、大小与化学成分进行了表征。系统研究了反应体系的组分、配比、反应温度及分散方法等反应条件对“微反应器”与产物形态、大小的影响。探讨了ZnO纳米粒子的稳定性及其原因。并对ZnO纳米粒子的紫外—可见光吸收性能进行了表征。     

Synthesis and Characterization of Zinc Oxide Nano-particles by Solid State Chemical Reaction Method

Several important synthetic parameters such as precursor concentration, reaction time are found to determine the growth of ZnO nanostructures. These reaction parameters can be tuned to produce a variety size of nanostructures. In this work we show the importance of these parameters on the size of synthesized zinc oxide nano-powders. ZnO nanoparticles are synthesized by the solid-state reaction using ZnSO₄·7H₂O and NaOH as the reagents. In this method Zn(OH)₂ is the intermediate product of the reaction, we show that by adjusting the molar ratio of the reagents and grinding time, we can be removed this unwanted component in the final product so for obtaining pure ZnO nanostructures the calcinations process is not necessary, also we can tune the size of ZnO nanoparticles. XRD spectra of the nanoparticles demonstrate typical diffraction peaks of a well-crystalline Wurtzite ZnO structure transmission electron microscopic observations show that these nanoparticles are of hexagonal phase ZnO mostly in round shapes and he composition analysis by EDX indicate that final product is pure ZnO. In the optimum conditions by XRD analysis we see that the mean grain size of synthesized zinc oxide nano-particles is about 44 nm.     

Green biosynthesis and characterization of zinc oxide nanoparticles using Corymbia citriodora leaf extract and their photocatalytic activity

ABSTRACT

We reported a green and simple method for biosynthesizing zinc oxide nanoparticles (ZnO NPs) using Corymbia citriodora leaf extract as reducing and stabilizing agent. SEM, EDX, XRD, UV–VIS spectroscopy, Raman spectroscopy and TGA have been used for characterizing the biosynthesized ZnO NPs. The results indicating the ZnO NPs synthesized by C. citriodora leaf extract have high purity and the average size is 64?nm. The photocatalytic activity of the ZnO NPs has been investigated by degradation methylene blue under visible light irradiation. Due to the smaller size, the biosynthesized ZnO NPs showed an excellent photocatalytic performance.     

Synthesis and field emission characteristics of bilayered ZnO nanorod array prepared by chemical reaction

The uniform, large-scale, and bilayered ZnO nanorod array on silicon substrate has been synthesized by a catalyst and template-free chemical reaction in a dilute solution. The effect of different precursor ZnO films on the morphology and size of the ZnO nanorod array has been investigated. Moreover, the morphology evolution of the ZnO nanorod array with the increase of reaction time indicates that the second growth is the reason for the decrease of the ZnO nanorod diameter and the formation of the bilayered ZnO nanorod array. Finally, the field emission from the ZnO nanorod array with different diameters is presented.     

Synthesis, characterization and antimicrobial investigation of mechanochemically processed silver doped ZnO nanoparticles

The application of nanomaterials has gained considerable momentum in various fields in recent years due to their high reactivity, excellent surface properties and quantum effects in the nanometer range. The properties of zinc oxide (ZnO) vary with its crystallite size or particle size and often nanocrystalline ZnO is seen to exhibit superior physical and chemical properties due to their higher surface area and modified electronic structure. ZnO nanoparticles are reported to exhibit strong bacterial inhibiting activity and silver (Ag) has been extensively used for its antimicrobial properties since ages. In this study, Ag doped ZnO nanoparticles were synthesized by mechanochemical processing in a high energy ball mill and investigated for antimicrobial activity. The nanocrystalline nature of zinc oxide was established by X-ray diffraction (XRD) studies. It is seen from the XRD data obtained from the samples, that crystallite size of the zinc oxide nanoparticles is seen to decrease with increasing Ag addition. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) data also supported the nanoparticle formation during the synthesis. The doped nanoparticles were subjected to antimicrobial investigation and found that both increase in Ag content and decrease in particle size contributed significantly towards antimicrobial efficiency. It was also observed that Ag doped ZnO nanoparticles possess enhanced antimicrobial potential than that of virgin ZnO against the studied microorganisms of Escherichia coli and Staphylococcus aureus.     

Controlled growth of well-aligned ZnO nanorod array using a novel solution method

A simple method of synthesizing nanomaterials and the ability to control the size and position of them are crucial for fabricating nanodevices. In this work, we developed a novel ammonia aqueous solution method for growing well-aligned ZnO nanorod arrays on a silicon substrate. For ZnO nanorod growth, a thin zinc metal seed layer was deposited on a silicon substrate by thermal evaporation. Uniform ZnO nanorods were grown on the zinc-coated silicon substrate in aqueous solution containing zinc nitrate and ammonia water. The growth temperature was as low as 60-90 degrees C and a 4-in. wafer size scale up was possible. The morphology of a zinc metal seed layer, pH, growth temperature, and concentration of zinc salt in aqueous solution were important parameters to determine growth characteristics such as average diameters and lengths of ZnO nanorods. We could demonstrate the discrete controlled growth of ZnO nanorods using sequential, tailored growth steps. By combining our novel solution method and general photolithography, we selectively grew ZnO nanorod arrays on a patterned silicon substrate. Our concepts on controlled ZnO nanorod growth using a simple solution method would be applicable for various nanodevice fabrications.     

纳米级ZnO/MgO固体的合成及其对CO的氧化活性

The ZnO/MgO solid samples containing the ZnO nanoparticles of controllable size were prepared using colloidal technique. The catalytic performance of the ZnO/MgO samples for the CO oxidation was measured. It was revealed that the rate of the CO oxidation reaction on the ZnO nanoparticles with variable average radius (2.01-2.29 nm) shows nonmonotonic dependence caused by the quantum-confinement effect.     

Experimental and Theoretical Study of Enhanced Photocatalytic Activity of Mg‐Doped ZnO NPs and ZnO/rGO Nanocomposites

A systematic experimental and theoretical study of the origin of the enhanced photocatalytic performance of Mg‐doped ZnO nanoparticles (NPs) and Mg‐doped ZnO/reduced graphene oxide (rGO) nanocomposites has been performed. In addition to Mg, Cd was chosen as a doping material for the bandgap engineering of ZnO NPs, and its effects were compared with that of Mg in the photocatalytic performance of ZnO nanostructures. The experimental results revealed that Mg, as a doping material, recognizably ameliorates the photocatalytic performance of ZnO NPs and ZnO/graphene nanocomposites. Transmission electron microscopy (TEM) images showed that the Mg‐doped and Cd‐doped ZnO NPs had the same size. The optical properties of the samples indicated that Cd narrowed the bandgap, whereas Mg widened the bandgap of the ZnO NPs and the oxygen vacancy concentration was similar for both samples. Based on the experimental results, the narrowing of the bandgap, the particle size, and the oxygen vacancy did not enhance the photocatalytic performance. However, Brunauer–Emmett–Teller (BET) and Barret–Joyner–Halenda (BJH) models showed that Mg caused increased textural properties of the samples, whereas rGO played an opposite role. A theoretical study, conducted by using DFT methods, showed that the improvement in the photocatalytic performance of Mg‐doped ZnO NPs was due to a higher electron transfer from the Mg‐doped ZnO NPs to the dye molecules compared with pristine ZnO and Cd‐doped ZnO NPs. Moreover, according to the experimental results, along with Mg, graphene also played an important role in the photocatalytic performance of ZnO.     

ZnO自组装薄膜的可控生长及其光催化性能

通过改变工艺参数, 制得了粒径可控的ZnO自组装薄膜. 该薄膜在可见光区域出现了光子带隙. 以染料甲基橙的光催化降解为模型评价了ZnO自组装薄膜的光催化活性. 利用X射线衍射仪(XRD)和扫描电子显微镜(SEM)表征了ZnO的晶体结构和微观形貌. 实验结果表明, ZnO自组装薄膜在太阳光照射下表现出良好的光催化性能, 其光催化活性随着ZnO颗粒粒径的减小而提高. ZnO自组装薄膜光催化降解甲基橙的反应符合一级反应动力学规律.     

Controlling ZnO morphology for improved methanol steam reforming reactivity

The selectivity towards CO2 during steam reforming of methanol on Pd increases in the order Al2O3 < ZrO2 < ZnO. However, conventional catalyst preparation can damage the ZnO surface, even causing complete dissolution. The faceted, prismatic ZnO crystals in the support (Aldrich) get easily destroyed during catalyst preparation. We show in this work that, by using organic precursors, the faceted ZnO particles can be preserved. The role of ZnO morphology on reactivity for methanol steam reforming (MSR) is explored. Since the MSR reactivity and selectivity is also a function of the particle size of the nanoparticles as well as the presence of the PdZn ordered alloy phase, we have controlled for both these parameters to derive the true influence of the support. We find that the catalyst prepared from an organic precursor is more active than one prepared from acidic precursors, despite having similar particle size and extent of bulk PdZn ordered alloy formation. The results suggest that preserving certain ZnO surfaces is beneficial, and the ZnO support may play an important role in the overall reaction of methanol steam reforming.     

Combustion synthesis of calcium doped ZnO nanoparticles for the photocatalytic degradation of methylene blue dye

ZnO nanoparticles are one of the prominent photocatalysts for environmental applications due to its high redox ability, nontoxic and higher stability. This report explains the synthesis of ZnO nanoparticles by a simple solution combustion method using zinc nitrate hexahydrate as an oxidizing agent and incense stick powder as fuel at 400 °C. Several techniques were adopted for the characterization of the obtained product. X-ray diffraction (XRD) pattern shows that a lower concentration of fuel gives pure ZnO and a higher concentration of fuel results in calcium doped ZnO with a cubic phase having a crystallite size of 32–28 nm. UV–vis spectrum shows that as the fuel concentration increases, band gap decreases and reaches to 3.33 eV for 3 g of fuel. Spongy networks with many pores wereobserved in the scanning electron microscope (SEM) and transmission electron microscope (TEM) images showed the average particle size of Ca doped ZnO NPs is about 20 nm. Pure and Ca doped ZnO nanoparticles were examined for photocatalytic degradation of methylene blue (MB) dye under UV light irradiation. The results prove that Ca doped ZnO nanoparticles show good photocatalytic activity.     

Electrical,optical and photocatalytic properties of Ti-loaded ZnO/ZnO and Ti-loaded ZnO nanospheres

Ti-loaded ZnO and Ti-loaded ZnO/ZnO nanoparticles have been synthesized by sol–gel method and analyzed for photocatalyst application. The phase confirmation was analyzed by powder XRD and surface morphology with HR-SEM and EDAX spectrum. The particle size measured using HR-TEM and SAED pattern confirms the crystalline nature of Ti-loaded ZnO and Ti-loaded ZnO/ZnO nanoparticles. The optical properties were studied with UV–visible diffuse reflectance spectra. The DRS of Ti-loaded ZnO/ZnO nanoparticles are similar to those of pristine ZnO nanoparticles. The KM plots show both the synthesized Ti-loaded ZnO/ZnO and Ti-loaded ZnO exhibit in UV-A region. The electric properties are studied with impedance analyzer, and the results show the charge-transfer resistance of Ti-loaded ZnO/ZnO is larger than that of Ti-loaded ZnO nanoparticles. The photocatalytic activity was studied with methylene blue dye and phenol degradation by Ti-loaded ZnO/ZnO, Ti-loaded ZnO, TiO₂ and ZnO nanoparticles. The photocatalytic activity of Ti-loaded ZnO/ZnO nanospheres is slightly higher than that of other nanoparticles, which shows that they have excellent application as photocatalyst.     

A theoretical study of water adsorption on (10-10) and (0001) ZnO surfaces: molecular cluster, basis set and effective core potential dependence

The adsorption of water molecule and hydroxyl ions on the (10-10) and (0001) ZnO surfaces has been studied for (ZnO)₄, (ZnO)₅ and (ZnO)₆ cluster models. Different representations for the atomic basis sets and the effective core potential (ECP) approximations have been employed and the effects of cluster size, conformation and basis sets are analyzed and discussed.     

Pt纳米花/ZnO复合阵列的制备及对甲醇氧化催化的研究

利用调控ZnO纳米棒阵列的疏水、亲水性,由电化学方法制备了Pt纳米花/ZnO(PtNF/ZnO)复合阵列.该复合阵列排列规则、尺寸均一、方向一致.每一根ZnO纳米棒的顶端都覆盖着由Pt纳米颗粒构成的Pt纳米花,具有大的比表面积.与以亲水性的ZnO纳米棒制得的覆盖Pt纳米颗粒的ZnO复合阵列(PtNP/ZnO)以及单独的Pt颗粒相比,PtNF/ZnO复合阵列对甲醇氧化具有更高的电化学催化活性.