Insulated π-conjugated metallopolymers

Recently, there has been a progressive development of insulated π-conjugated metallopolymers with accumulated features of π-conjugated bridging units, transition metal complexes, and encapsulating moieties, as higher-order functionalized materials. A number of insulated conjugated metallopolymers have been successfully synthesized and their fascinating properties have been reported. In addition to the conventional features derived from π-conjugation and transition metals, their insulated structures can compensate for solubility, a disadvantage in conventional metallopolymers, and enhance their functionalities, such as sensing, luminescence, and conduction. In this review, we summarize the synthetic methodologies, structural characteristics, and functionalities of one-dimensional insulated π-conjugated metallopolymers, while focusing on the effect of transition metals and insulation on their properties.     

PL and EL behavior of near‐red luminescent metallopolymer easily prepared from phosphine‐containing copolymer and chloro{bis(1‐phenylisoquinolinato‐N,C2′)}iridium(III), and its monomeric analog

We successfully developed phosphorescent cyclometallated iridium‐containing metallopolymers, which are near‐red luminescent iridium complexes bearing phosphine‐containing copolymers used as polymer ligands, and investigated their photoluminescence and electroluminescence behavior. The phosphine copolymer ligand made from methyl methacrylate and 4‐styryldiphenylphosphine can be used as an anchor, which coordinates luminescent iridium units to form the metallopolymer easily. Organic light‐emitting diodes were fabricated from the metallopolymer and its nonpolymer analog, [IrCl(piq)₂PPh₃]. These complexes exhibited quite similar luminescence behavior, except for emission from the free‐phosphine‐units in the polymer side chain and their energy‐transferring properties from host to guest materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4366–4378, 2009     

Widely Adaptable Oil‐in‐Water Gel Emulsions Stabilized by an Amphiphilic Hydrogelator Derived from Dehydroabietic Acid

A surfactant, R‐6‐AO, derived from dehydroabietic acid has been synthesized. It behaves as a highly efficient low‐molecular‐weight hydrogelator with an extremely low critical gelation concentration (CGC) of 0.18 wt % (4 mm ). R‐6‐AO not only stabilizes oil‐in‐water (O/W) emulsions at concentrations above its critical micelle concentration (cmc) of 0.6 mm , but also forms gel emulsions at concentrations beyond the CGC with the oil volume fraction freely adjustable between 2 % and 95 %. Cryo‐TEM images reveal that R‐6‐AO molecules self‐assemble into left‐handed helical fibers with cross‐sectional diameters of about 10 nm in pure water, which can be turned to very stable hydrogels at concentrations above the CGC. The gel emulsions stabilized by R‐6‐AO can be prepared with different oils (n‐dodecane, n‐decane, n‐octane, soybean oil, olive oil, tricaprylin) owing to the tricyclic diterpene hydrophobic structure in their molecules that enables them to adopt a unique arrangement in the fibers.     

Light‐Powered Self‐Healable Metallosupramolecular Soft Actuators

Supramolecular functional materials able to respond to external stimuli have several advantages over their classical covalent counterparts. The preparation of soft actuators with the ability to respond to external stimuli in a spatiotemporal fashion, to self‐repair, and to show directional motion, is currently one of the most challenging research goals. Herein, we report a series of metallopolymers based on zinc(II)–terpyridine coordination nodes and bearing photoisomerizable diazobenzene units and/or solubilizing luminescent phenylene–ethynylene moieties. These supramolecular polymers act as powerful gelating agents at low critical gelation concentrations. The resulting multiresponsive organogels display light‐triggered mechanical actuation and luminescent properties. Furthermore, owing to the presence of dynamic coordinating bonds, they show self‐healing abilities.     

Synthesis and characterization of tris(2,2′‐bipyridine)ruthenium‐cored star‐shaped polymers via RAFT polymerization

A new bipyridine‐functionalized dithioester was synthesized and further used as a RAFT agent in RAFT polymerization of styrene and N‐isopropylacrylamide. Kinetics analysis indicates that it is an efficient chain transfer agent for RAFT polymerization of the two monomers which produce polystyrene and poly(N‐isopropylacrylamide) polymers with predetermined molecular weights and low polydispersities in addition to the end functionality of bipyridine. The bipyridine end‐functionalized polymers were further used as macroligands for the preparation of star‐shaped metallopolymers. Hydrophobic polystyrene macroligand combined with hydrophiphilic poly(N‐isopropylacrylamide) was complexed with ruthenium ions to produce amphiphilic ruthenium‐cored star‐shaped metallopolymers. The structures of these synthesized metallopolymers were further elucidated by UV–vis, fluorescence, size exclusion chromatography (SEC), and differential scanning calorimetry (DSC) as well as NMR techniques. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4225–4239, 2007     

Conjugated metallopolymers for fluorescent turn-on detection of nitric oxide

A series of eight pi-conjugated polymers (CPs) composed of phenylenevinylene, phenyleneethynylene, fluorene, and thiophene derivatives have been prepared with bipyridyl or terpyridyl substituents within the pi-conjugated backbone or at side-chain positions. These ligand-modified CPs serve as macromolecular scaffolds for conducting metallopolymers. The optical and photoluminescent properties of the polymers and corresponding copper(II) metallopolymers were investigated. Copper(II) is a highly efficient quencher of CP emission (75-100% quenching). CPs featuring bipyridyl units within the CP backbone are quenched more efficiently than those with terpyridyl units. The copper(II) metallopolymer undergoes reduction to the corresponding copper(I) species upon reaction with nitric oxide, with concomitant changes in integrated emission ranging from a 50% decrease to a 320% increase. The positive emission response is largest when Cu(II) was bound to the CP through bipyridyl units within the backbone, making these materials the best candidates for NO sensing by a turn-on emission mechanism.     

Tuning the electronic properties of conjugated polymer by tethering low‐bandgap rhenium(I) complex on the main chain

Low‐bandgap rhenium(I) complex with absorption onset at 795 nm in solution was tethered onto π‐conjugated polymer. The conjugated copolymer provides solution processability of the metallopolymer, and the pendant allows the low energy‐absorbing Re(I) complex units to be evenly distributed on the thin film. The copolymer tethered with low‐bandgap rhenium complex was synthesized by Suzuki cross‐coupling reaction. The metal‐free polymer ( poly‐1 ) tethered with functionalized intramolecular charge transfer dye, 2‐phenyl‐3‐pyridin‐2‐yl‐5,7‐di‐2‐thienylthieno[3,4‐b]pyrazine, exhibited high molecular weight, good film‐forming properties, and excellent solution processability. The pendants of the conjugated polymer possess donor–acceptor characters and broaden the absorption band. These pendants can function as bidentate ligands for metal chelation. The solubilizing groups on the monomers provide good solubility to the polymer even with high content of metal chelation. Upon the complexation with rhenium(I) pentacarbonyl chloride, the absorption spectrum of the resulting metallopolymer was further extended toward the near‐infrared region. Photovoltaic performances based on this metallopolymer have been studied. The design approach of these metallopolymers provides synthetic feasibility for coordinating wide range of metal ions on the pendant, and the resulting low‐bandgap polymer can be a potential candidate for light harvesting material in solar cell applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2311–2319, 2010     

Direct Electrochemistry of Horseradish Peroxidase Immobilized in a Low Molecular Weight Gel

The ternary system of dodecylpyridinium bromide (DDPB)/acetone/H₂O with appropriate composition can form a gel spontaneously and the gel is stable in hydrophobic ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim]PF₆). Based on the gelation phenomenon we observed, the low molecular weight gelator (LMWG) was first tried to immobilize horseradish peroxidase (HRP) on glassy carbon electrode (GCE). The scanning electron microscope (SEM) images, the UV‐Vis spectra and the bioactivity measurement indicate that the gel is suitable for the immobilization of HRP. The direct electrochemistry of the HRP‐gel modified GCE (HRP‐gel/GCE) in [Bmim]PF₆ shows a pair of well‐defined and quasi‐reversible redox peaks with the heterogeneous electron transfer rate constant (k_s) being 14.4 s^?1, indicating that the direct electron transfer between HRP and GCE is fast. The HRP‐gel/GCE is stable and reproducible. Also the electrode exhibits good electrocatalytic effect on the reduction of trichloroacetic acid (TCA), showing good promise in bioelectrocatalysis.     

[FeFe]‐Hydrogenase Mimetic Metallopolymers with Enhanced Catalytic Activity for Hydrogen Production in Water

Electrocatalytic [FeFe]‐hydrogenase mimics for the hydrogen evolution reaction (HER) generally suffer from low activity, high overpotential, aggregation, oxygen sensitivity, and low solubility in water. By using atom‐transfer radical polymerization (ATRP), a new class of [FeFe]‐metallopolymers with precise molar mass, defined composition, and low polydispersity, has been prepared. The synthetic methodology introduced here allows facile variation of polymer composition to optimize the [FeFe] solubility, activity, and long‐term chemical and aerobic stability. Water soluble functional metallopolymers facilitate electrocatalytic hydrogen production in neutral water with loadings as low as 2 ppm and operate at rates an order of magnitude faster than hydrogenases (2.5×10⁵ s^?1), and with low overpotential requirement. Furthermore, unlike the hydrogenases, these systems are insensitive to oxygen during catalysis, with turnover numbers on the order of 40 000 under both anaerobic and aerobic conditions.     

Alkaline Stability of Low Oxophilicity Metallopolymer Anion-Exchange Membranes

Anion-exchange membrane fuel cells (AEMFCs) are promising energy conversion devices due to their high efficiency. Nonetheless, AEMFC operation time is currently limited by the low chemical stability of their polymeric anion-exchange membranes. In recent years, metallopolymers, where the metal centers assume the ion transport function, have been proposed as a chemically stable alternative. Here we present a systematic study using a polymer backbone with side-chain N-heterocyclic carbene (NHC) ligands complexed to various metals with low oxophilicity, such as copper, zinc, nickel, and gold. The golden metallopolymer, using the metal with the lowest oxophilicity, demonstrates exceptional alkaline stability, far superior to state-of-the-art quaternary ammonium cations, as well as good in situ AEMFC results. These results demonstrate that judiciously designed metallopolymers may be superior to purely organic membranes and provides a scientific base for further developments in the field.     

Sonication‐Triggered Instantaneous Gel‐to‐Gel Transformation

Two new peptide‐based isomers containing cholesterol and naphthalic groups have been designed and synthesized. We found that the position of L ‐alanine in the linker could tune the gelation properties and morphologies. The molecule with the L ‐alanine residue positioned in the middle of the linker ( 1 b ) shows better gelation behavior than that with L ‐alanine directly linked to the naphthalimido moiety ( 1 a ). As a result, a highly thermostable organogel of 1 b with a unique core–shell structure was obtained at high temperature and pressure in acetonitrile. Moreover, the gels of 1 a and 1 b could undergo an instantaneous gel‐to‐gel transition triggered by sonication. Ultrasound could break the core–shell microsphere of 1 b and the micelle structure of 1 a into entangled fibers. By studying the mechanism of the sonication‐triggered gel‐to‐gel transition process of these compounds, it can be concluded that ultrasound has a variety of effects on the morphology, such as cutting, knitting, unfolding, homogenizing, and even cross‐linking. Typically, ultrasound can cleave and homogenize π‐stacking and hydrophobic interactions among the gel molecules and then reshape the morphologies to form a new gel. This mechanism of morphology transformation triggered by sonication might be attractive in the field of material storage and controlled release.     

Preparation and evaluation of a chiral HPLC stationary phase based on cone calix[4]arene functionalized at the upper rim with l‐alanine units

Here we report a new chiral stationary phase (CSP) immobilized on silica gel based on cone calix[4]arene functionalized at the upper rim with two l ‐alanine units as new chiral selector that has been used in high‐performance liquid chromatography. The CSP was prepared by covalently bonding the allyl groups at the lower rim of calix[4]arene to silica gel by thiol‐ene click chemistry reaction. Elemental analysis of the CSP showed that 120 μmol of chiral selector bonded per gram of silica gel. 1‐Hexene was used for end‐capping of unreacted mercapto groups on silica gel. Since the CSP is chemically bonded to the silica, it can be used in the normal‐phase and reversed‐phase mode and with halogenated solvents as mobile phases, if desired. The chromatographic performance of the CSP was evaluated in the enantioseparation of the 3,5‐dinitrobenzoyl derivatives of some amino acids, diclofop‐methyl and dl ‐mandelic acid.     

Organic sol–gel synthesis of microporous molecular networks containing spirobifluorene and tetraphenylmethane nodes

The microporous molecular networks based on rigid tetrafunctional units are synthesized via organic sol–gel polymerization of 2,2′,7,7′‐tetraamino‐9,9′‐spirobifluorene (TASBF) and/or tetrakis(4‐aminophenyl)methane (TAPM) with a diisocyanate, hexamethylene diisocyanate (HDI), or p‐phenylene diisocyanate. This study is performed as an extension of our previous report on the first organic sol–gel method, which enabled the synthesis of microporous molecular networks via a two‐stage mechanism involving the formation of colloidal dispersions of the nanoparticulate molecular networks and their subsequent growth to monolithic networks on solvent evaporation. The sol–gel‐synthesized molecular networks obtained by incorporating TASBF as a network former show improved porosity, processability, and thermal stability than the TAPM‐based system. The improved porosity of TASBF‐based networks is attributed to higher rigidity of the spirobifluorene compared with the tetraphenylmethane units. We also demonstrate the synthesis of mixed organic molecular networks by sol–gel copolymerization of the two network formers, TASBF and TAPM, and a diisocyanate monomer. The sol–gel transformation of TASBF/TAPM/HDI occurred at longer reaction times with increasing the amount of TASBF in the TASBF/TAPM/HDI mixture. The results indicate that the organic sol–gel method can be further optimized by adjusting various synthesis parameters to create new functional organic molecular network materials. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Drug Self‐Delivery Systems Based on Hyperbranched Polyprodrugs towards Tumor Therapy

Amphiphilic hyperbranched polyprodrugs (DOX‐S‐S‐PEG) with drug repeat units in hydrophobic core linked by disulfide bonds were developed as drug self‐delivery systems for cancer therapy. The hydroxyl groups and the amine group in doxorubicin (DOX) were linked by 3,3′‐dithiodipropanoic acid as hydrophobic hyperbranched cores, then amino‐terminated polyethylene glycol monomethyl ether (mPEG‐NH₂) as hydrophilic shell was linked to hydrophobic cores to form amphiphilic and glutathione (GSH)‐responsive micelle of hyperbranched polyprodrugs. The amphiphilic micelles can be disrupted under GSH (1 mg mL^?1) circumstance. Cell viability of A549 cells and 293T cells was evaluated by CCK‐8 and Muse Annexin V & Dead Cell Kit. The disrupted polyprodrugs maintained drug activity for killing tumor cells. Meanwhile, the undisrupted polyprodrugs possessed low cytotoxicity to normal cells. The cell uptake experiments showed that the micelles of DOX‐S‐S‐PEG were taken up by A549 cells and distributed to cell nuclei. Thus, the drug self‐delivery systems with drug repeat units in hydrophobic cores linked by disulfide bonds showed significant special advantages: 1) facile one‐pot synthesis; 2) completely without toxic or non‐degradable polymers; 3) DOX itself functions as fluorescent labeled molecule and self‐delivery carrier; 4) drug with inactive form in hyperbranched cores and low cytotoxicity to normal cells. These advantages make them excellent drug self‐delivery systems for potential high efficient cancer therapy.     

Water‐Binding‐Mediated Gelation/Crystallization and Thermosensitive Superchirality

Determination of molecular structural parameters of hydrophobic cholesterol–naphthalimide conjugates for water binding capabilities as well as their moisture‐sensitive supramolecular self‐assembly were revealed. Water binding was a key factor in leading trace water‐induced crystallization against gelation in apolar solvent. Ordered water molecules entrapped in self‐assembly arrays revealed by crystal structures behave as hydrogen‐bonding linkers to facilitate three‐dimensional growth into crystals rather than one‐dimensional gel nanofibers. Water binding was also reflected on the supramolecular chirality inversion of vesicle self‐assembly in aqueous media via heating‐induced dehydration. Structural parameters that favor water binding were evaluated in detail, which could help rationally design organic building units for advancing soft materials, crystal engineering, and chiral recognition.     

Dramatic Specific‐Ion Effect in Supramolecular Hydrogels

We report on a pronounced specific‐ion effect on the intermolecular and chiral organization, supramolecular structure formation, and resulting materials properties for a series of low molecular weight peptide‐based hydrogelators, observed in the presence of simple inorganic salts. This effect was demonstrated using aromatic short peptide amphiphiles, based on fluorenylmethoxycarbonyl (Fmoc). Gel‐phase materials were formed due to molecular self‐assembly, driven by a combination of hydrogen bonding and π‐stacking interactions. Pronounced morphological changes were observed by atomic force microscopy (AFM) for Fmoc‐YL peptide, ranging from dense fibrous networks to spherical aggregates, depending on the type of anions present. The gels formed had variable mechanical properties, with G′ values between 0.8 kPa and 2.4 kPa as determined by rheometry. Spectroscopic analysis provided insights into the differential mode of self‐assembly, which was found to be dictated by the hydrophobic interactions of the fluorenyl component, with comparable H‐bonding patterns observed in each case. The efficiency of the anions in promoting the hydrophobic interactions and thereby self‐assembly was found to be consistent with the Hofmeister anion sequence. Similar effects were observed with other hydrophobic peptides, Fmoc‐VL and Fmoc‐LL. The effect was found to be less pronounced for a less hydrophobic peptide, Fmoc‐AA. To get more insights into the molecular mechanism, the effect of anions on sol–gel equilibrium was investigated, which indicates the observed changes result from the specific‐ion effects on gels structure, rather than on the sol–gel equilibrium. Thus, we demonstrate that, by simply changing the ionic environment, structurally diverse materials can be accessed providing an important design consideration in nanofabrication via molecular self‐assembly.     

Synthesis of β‐Cyclodextrin Containing Copolymer via “Click” Chemistry and Its Self‐Assembly in the Presence of Guest Compounds

We report the synthesis of a hydrophilic copolymer with one polyethylene glycol (PEG) block and one β‐cyclodextrin (β‐CD) containing block by a “click” reaction between azido‐substituted β‐CD and propargyl flanking copolymer. ¹H NMR study suggested a highly efficient conjugation of β‐CD units by this approach. The obtained copolymer was used as a host macromolecule to construct assemblies in the presence of hydrophobic guests. For assemblies containing a hydrophobic polymer, their size can be simply adjusted by simply changing the content of hydrophobic component. By serving as a guest molecule, hydrophobic drugs can also be loaded accompanying the formation of nanoparticles, and the drug payload is releasable. Therefore, the copolymer synthesized herein can be employed as a carrier for drug delivery.     

Liposome chromatography: liposomes immobilized in gel beads as a stationary phase for aqueous column chromatography

Liposomes have been used as a stationary phase for column chromatography with an aqueous mobile phase. They were immobilized in the pores of carrier gel beads by two methods: (A) hydrophobic ligands were coupled to the matrix of gel beads, which then were packed into a column and liposomes were applied and became associated with the ligands by hydrophobic interaction; and (B) phospholipids and detergent were dialysed in the presence of gel beads; many of the liposomes that formed in the pores of the beads were sterically immobilized by the gel matrix. Proteoliposomes containing red cell glucose transport protein in the lipid bilayers were immobilized in a column by method A. This column retained D-glucose longer than L-glucose. In contrast to L-glucose, D-glucose was transported into and out of the immobilized liposomes, causing an increased retention. Liposomes with (stearylamine)+ or (phosphatidylserine)- in their lipid bilayers were immobilized by method B and the gel beads were packed into a column. A protein of opposite charge was applied in excess. Under suitable conditions, the protein molecules became close-packed on the liposome surfaces. Ion-exchange chromatographic experiments with proteins showed that these sterically immobilized liposomes were also stable enough to be used as a stationary phase. The loss of lipids was 5-23% in the first run at high protein load and with sodium chloride gradient elution but was lower in subsequent runs. It is proposed that water-soluble molecules can be separated and their interactions with liposome surfaces studied by chromatography on immobilized liposomes in detergent-free aqueous solution. Membrane proteins can be inserted and ligands can be anchored in the lipid bilayers for chromatographic purposes.     

Synthesis of Chemically Asymmetric Silica Nanobottles and Their Application for Cargo Loading and as Nanoreactors and Nanomotors

We report the synthesis of chemically asymmetric silica nanobottles (NBs) with a hydrophobic exterior surface (capped with 3‐chloropropyl groups) and a hydrophilic interior surface for spatially selective cargo loading, and for application as nanoreactors and nanomotors. The silica NBs, which have a “flask bottle” shape with an average diameter of 350 nm and an opening of ca. 100 nm, are prepared by anisotropic sol–gel growth in a water/n‐pentanol emulsion. Due to their chemically asymmetric properties, nanoparticles (NPs) with hydrophilic or hydrophobic surface properties can be selectively loaded inside the NBs or on the outside of the NBs, respectively. A high‐performance nanomotor is constructed by selectively loading catalytically active hydrophilic Pt NPs inside the NBs. It is also demonstrated that these NBs can be used as vessels for various reactions, such as the in situ synthesis of Au NPs, and using Au NP‐loaded NBs as nanoreactors for catalytic reactions.     

Dual‐Responsive Viscoelastic Lyotropic Liquid Crystal Fluids to Control the Diffusion of Hydrophilic and Hydrophobic Molecules

A smart lyotropic liquid crystal (LLC) system was prepared to control the diffusion rate of hydrophilic and hydrophobic molecules. The LLC system is composed of a nonionic surfactant (tetraethylene glycol monododecylether; C₁₂EO₄) and an anionic azobenzene surfactant (Azo‐surfactant). C₁₂EO₄ was the main component of the LLC system. The Azo‐surfactant, which can undergo photo‐isomerization, played the role of trigger in this system. LLC gels formed in a solution comprised of Azo‐surfactant (10 mm ) and C₁₂EO₄ (300 mm ). The LLC gels became broken when more Azo‐surfactant was added (e.g., up to 15 mm ) and the viscoelasticity was lost. Surprisingly, when we used UV light to irradiate the 300 mm C₁₂EO₄/15 mm Azo‐surfactant sample, the gel was recovered and high viscoelasticity was observed. However, under visible‐light irradiation, the gel became broken again. The gel formation could also be triggered by heating the sample. On heating the 300 mm C₁₂EO₄/15 mm Azo‐surfactant sample, the system thickened to a point at which typical gel behavior was registered. When the sample was cooled, the gel broke again. The LLC could be used for controlled release of hydrophilic and hydrophobic molecules, and could be considered as a versatile vehicle for the delivery of actives in systems of practical importance.