Experimental, theoretical calculations of the vibrational spectra and conformational analysis of 2,4-di-tert-butylphenol

In the present work, we reported a combined experimental and theoretical study on conformational stability, molecular structure and vibrational spectra of 2,4-di-tert-butylphenol (2,4-DTBP). The FT-IR (400-4000cm(-1)) and FT-Raman spectra (50-3500cm(-1)) of 2,4-DTBP were recorded. The molecular geometry, harmonic vibrational frequencies and bonding features of 2,4-DTBP in the ground-state have been calculated by using the density functional BLYP/B3LYP methods. The energy calculated by time-dependent density functional theory (TD-DFT) result complements with the experimental findings. The calculated highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energies show that charge transfer occurs within the molecule. Finally the calculation results were compared with measured infrared and Raman spectra of the title compound which showed good agreement with observed spectra.     

Molecular structure, vibrational spectroscopic, first-order hyperpolarizability and HOMO, LUMO studies of 2-aminobenzimidazole

In the present work, we reported a combined experimental and theoretical study on molecular structure, vibrational spectra and HOMO-LUMO analysis of 2-aminobenzimidazole (2-ABD). The FTIR (400-4000 cm(-1)) and FT-Raman spectra (50-3500 cm(-1)) of 2-ABD were recorded. The molecular geometry, harmonic vibrational wavenumbers and bonding features of 2-ABD in the ground-state have been calculated by using the density functional B3LYP method with 6-311++G(d,p) and 6-31G(d) as basis sets. The energy and oscillator strength were calculated by time-dependent density functional theory (TD-DFT) result complements with the experimental findings. The calculated HOMO and LUMO energies showed that charge transfer occurs within the molecule. Finally, the calculation results were applied to simulate infrared and Raman spectra of the title compound which showed good agreement with the observed spectra.     

FT-IR, FT-Raman and UV spectral investigation; computed frequency estimation analysis and electronic structure calculations on 1-nitronaphthalene

In this work, the vibrational spectral analysis was carried out by using FT-Raman and FT-IR spectroscopy in the range 100-4000cm(-1) and 400-4000cm(-1) respectively, for 1-nitronaphthalene (C(10)H(7)NO(2)) molecule. The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands are interpreted with the aid of structure optimizations and normal coordinate force field calculations based density functional theory (DFT) and ab initio HF methods and different basis sets combination. The complete vibrational assignments of wavenumbers were made on the basis of total energy distribution (TED). The results of the calculations were applied to simulated spectra of the title compound, which show excellent agreement with observed spectra. The scaled B3LYP/6-311++G(d,p) results show the best agreement with the experimental values over the other methods. The energy and oscillator strength calculated by time-dependent density functional theory (TD-DFT) complements with the experimental findings. Thermodynamic properties of the title compound at different temperatures have been calculated. Besides, frontier molecular orbitals (FMO), molecular electrostatic potential (MEP) were performed.     

The spectroscopic (FT-IR, FT-Raman), NCA, first order hyperpolarizability, NBO analysis, HOMO and LUMO analysis of L-cysteine by ab inito HF and density functional method

In this work, we report a combined experimental and theoretical study on molecular structure (monomer, dimer), vibrational spectra, and Natural Bond Orbital (NBO) analysis of non-ionized L-cysteine (LCY). The FT-IR solid phase (4000-400 cm(-1)) and FT-Raman spectra (3500-50 cm(-1)) of LCY was recorded at room temperature. The molecular geometry, harmonic and anharmonic vibrational frequencies and bonding features of LCY in the ground state have been calculated by using the density functional method (B3LYP) with 6-311G(d,p) as basis set. The assignments of the vibrational spectra have been carried out with the help of normal co-ordinate analysis (NCA) following the Scaled Quantum Mechanical Force Field (SQMFF) methodology. The first order hyperpolarizability (β(0)) of this novel molecular system and related properties (β, α(0) and Δα) of LCY are calculated using HF/6-311G(d,p) method on the finite-field approach. Stability of the molecule has been analyzed using NBO analysis. The calculated first hyperpolarizability shows that the molecule is an attractive molecule for future applications in non-linear optics. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. Finally the calculations results were applied to stimulate infrared and Raman spectra of the title compound which show good agreement with observed spectra.     

Molecular structure, vibrational spectroscopic (FT-IR, FT-Raman), UV and NBO analysis of 2-chlorobenzonitrile by density functional method

In this work, we will report a combined experimental and theoretical study on molecular structure, vibrational spectra, NBO and UV spectral analysis of 2-chlorobenzonitrile (2-ClBN). The FT-IR solid phase (4000-400 cm(-1)), and FT-Raman spectra (3500-50 cm(-1)) of 2-ClBN was recorded. The molecular geometry, harmonic vibrational frequencies and bonding features of 2-ClBN in the ground state have been calculated by using the density functional methods (BLYP, B3LYP) with 6-31G(d,p) as basis set. The assignments of the vibrational spectra have been carried out with the help of normal co-ordinate analysis (NCA) following the Scaled Quantum Mechanical Force Field Methodology (SQMFF). Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The results show that charge in electron density (ED) in the σ* and π* anti bonding orbitals and E2 energies confirms the occurrence of ICT (Intra molecular Charge Transfer) within the molecule. The UV spectrum was measured in ethanol solution. The energy and oscillator strength calculated by Time-Dependent Density Functional Theory (TD-DFT) results complements with the experimental findings. The calculated HOMO and LUMO energies also confirm that charge transfer occurs within the molecule. Finally calculated results were applied to simulated Infrared and Raman spectra of the title compound which show good agreement with observed spectra.     

Experimental and computational studies of the structure and vibrational spectra of 2-[5,5-dimethyl-3-(2-phenyl-vinil)-cyclohex-2-enylidene]-malononitrile

The FTIR spectra (4000-100 cm(-1)) and Raman spectra (3500-30 cm(-1)) of 2-[5,5-dimethyl-3-(2-phenyl-vinil)-cyclohex-2-enylidene]-malononitrile in solid state were measured. In addition, the structure and harmonic vibrational frequencies of this molecule were theoretically evaluated using B3LYP density functional methods. The computed vibrational frequencies are used to determine the types of molecular motions associated with each of the experimental bands observed. Bond length alternation (BLA) was established. Comparison with the experimental spectra provides important information about the ability of this computational method to describe the vibrational modes in this type of "push-pull" systems with potential non-linear optical applications.     

Molecular structure, vibrational spectral studies of pyrazole and 3,5-dimethyl pyrazole based on density functional calculations

In this work, the experimental and theoretical vibrational spectra of pyrazole (PZ) and 3,5-dimethyl pyrazole (DMP) have been studied. FTIR and FT-Raman spectra of the title compounds in the solid phase are recorded in the region 4000-400 cm(-1) and 4000-50 cm(-1), respectively. The structural and spectroscopic data of the molecules in the ground state are calculated using density functional methods (B3LYP) with 6-311+G** basis set. The vibrational frequencies are calculated and scaled values are compared with experimental FTIR and FT-Raman spectra. The observed and calculated frequencies are found to be in good agreement. The complete vibrational assignments are performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanical (SM) method. 13C and 1H NMR chemical shifts results are compared with the experimental values.     

Vibrational spectroscopic analysis of 2-bromobenzoic and anthranilic acids: a combined experimental and theoretical study

In this work, the vibrational spectral analysis was carried out by using Raman and infrared spectroscopy in the range 100-4000 cm(-1) and 50-4000 cm(-1) respectively, for the title molecules. The molecular structure, fundamental vibrational frequencies and intensity of the vibrational bands are interpreted with the aid of structure optimizations and normal coordinate force field calculations based on Hartee-Fock (HF) and density functional theory (DFT) method and different basis sets combination. The complete vibrational assignments of wavenumbers were made on the basis of potential energy distribution (PED). The scaled B3LYP/6-311++G(d,p) results show the best agreement with the experimental values over the other methods. The effects due to the substitutions of amino group and halogen bond were investigated. The results of the calculations were applied to simulate spectra of the title compounds, which show excellent agreement with observed spectra.     

DFT, FT-Raman and FT-IR investigations of 5-o-tolyl-2-pentene

FT-IR and Raman spectra of 5-o-tolyl-2-pentene (OTP) have been experimentally reported in the region of 4000-10 cm(-1) and 4000-100 cm(-1), respectively. The optimized geometric parameters, normal mode frequencies and corresponding vibrational assignments of cis and trans isomers of OTP (C12H16) have been theoretically examined by means of B3LYP hybrid density functional theory (DFT) method together with 6-31G(d) and 6-31++G(d,p) basis sets. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated. Comparison between the experimental and theoretical results indicates that density functional B3LYP method is able to provide satisfactory results for predicting vibrational wavenumbers and trans isomer is supposed to be the most stable form of OTP molecule.     

A structural and spectroscopic study on para-aminohippuric acid with experimental and theoretical approaches

In this work, the molecular conformation, vibrational and electronic analysis of para-aminohippuric acid (pAHA, C(9)H(10)N(2)O(3)) were presented for the ground state using experimental techniques (FT-IR, FT-Raman and UV) and density functional theory (DFT) employing B3LYP exchange correlation with the 6-311++G(d,p) basis set. FT-IR and FT-Raman spectra were recorded in the regions of 400-4000cm(-1) and 50-4000cm(-1), respectively. The UV absorption spectra of the compound that dissolved in ethanol and water solution were recorded in the range of 190-400nm. Potential energy curve was computed by means of scanning NCCO torsion angle. The geometry optimization and the energies associated possible four conformers (C1-C4) were computed. The computational results diagnose the most stable conformer of pAHA as the C1 form. Optimized structure of compound was interpreted and compared with the earlier reported experimental values. The complete assignments of fundamental vibrations were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. A study on the electronic properties, such as frontier molecular energies, absorption wavelengths and oscillator strengths, were predicted by time-dependent DFT (TD-DFT) approach, while taking solvent effects into account. To investigate non-linear optical properties: polarizability, anisotropy of polarizability and molecular first hyperpolarizability of molecule were computed. Thermodynamic properties (heat capacity, entropy and enthalpy) of the title compound at different temperatures were calculated.     

Structures and vibrational frequencies of 2-hydroxy-3-methoxy-5-nitrobenzaldehyde and 2-methoxy-1-naphthaldehyde based on density functional theory calculations

FT-IR and FT-Raman spectra of 2-hydroxy-3-methoxy-5-nitrobenzaldehyde (HMN) and 2-methoxy-1-naphthaldehyde (MN) have been recorded in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The molecular structure, conformational stability, geometry optimization, vibrational frequencies have been investigated. The total energy calculations of HMN and MN were tried for various possible conformers. The spectra were interpreted with the aid of normal coordinate analysis based on density functional theory (DFT) using B3LYP/6-31G* and B3LYP/6-311+G** level and basis set combinations and was scaled using various scale factors yielding good agreement between observed and calculated frequencies. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of the simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

NMR, UV, FT-IR, FT-Raman spectra and molecular structure (monomeric and dimeric structures) investigation of nicotinic acid N-oxide: A combined experimental and theoretical study

In this work, the experimental and theoretical UV, NMR, and vibrational features of nicotinic acid N-oxide (abbreviated as NANO, C(6)H(5)NO(3)) were studied. The ultraviolet (UV) absorption spectrum of studied compound that dissolved in water was examined in the range of 200-800nm. FT-IR and FT-Raman spectra in solid state were observed in the region 4000-400cm(-1) and 3500-50cm(-1), respectively. The (1)H and (13)C NMR spectra in DMSO were recorded. The geometrical parameters, energies and the spectroscopic properties of NANO were obtained for all four conformers from density functional theory (DFT) B3LYP/6-311++G(d,p) basis set calculations. There are four conformers, C(n), n=1-4 for this molecule. The computational results identified the most stable conformer of title molecule as the C1 form. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. (13)C and (1)H nuclear magnetic resonance (NMR) chemical shifts of the molecule were calculated by using the gauge-invariant atomic orbital (GIAO) method. The electronic properties, such as excitation energies, absorption wavelengths, HOMO and LUMO energies, were performed by CIS approach. Finally the calculation results were applied to simulate infrared, Raman, and UV spectra of the title compound which show good agreement with observed spectra.     

FT-IR, FT-Raman spectra and ab initio HF, DFT vibrational analysis of 2,3-difluoro phenol

The FT-IR and FT-Raman spectra of 2,3-difluoro phenol (2,3-DFP) has been recorded in the region 4000-400 and 4000-100 cm(-1), respectively. The optimized geometry, frequency and intensity of the vibrational bands of 2,3-DFP were obtained by the ab initio HF and density functional theory (DFT) levels of theory with complete relaxation in the potential energy surface using 6-311+G(d,p) basis set. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FT-IR and FT-Raman spectra. The observed and the calculated frequencies are found to be in good agreement. The experimental spectra also coincide satisfactorily with those of theoretically constructed bar type spectrograms.     

2-Bromohydroquinone: structures, vibrational assignments and RHF, B- and B3-based density functional calculations

Vibrational spectral measurements, namely, infrared (4000-400 cm(-1)) and Raman (3500-50 cm(-1)) spectra have been made for 2-Bromohydroquinone. Optimized geometrical structures, harmonic vibrational frequencies and intensities have been computed by the ab initio (RHF), B-based (BLYP, BP86) and B3-based (B3P86, B3LYP, B3PW91) density functional methods using 6-31G(d) basis set. A complete assignment of the observed spectra has been proposed. Coupling of vibrations has been determined by calculating potential energy distributions (PEDs) at BP86/6-31G(d) level of theory. In the computed equilibrium geometries by all the levels, the bond lengths and bond angles show changes in the neighborhood of Bromine. Similarly, the vibrational spectra exhibit some marked spectral features unlike in hydroquinone and phenol. On the other hand, the infrared spectrum shows a clear evidence of O-H...O bonding near 3200 cm(-1) as in hydroquinone. Evaluation of the theoretical methods demonstrates that all the levels but the RHF have reproduced frequencies fairly accurately in the 2000-500 cm(-1); below 500 cm(-1) the RHF has performed reasonably well.     

FTIR and FT-Raman spectra, assignments, ab initio HF and DFT analysis of xanthine

The molecular vibrations of xanthine were investigated in polycrystalline sample, at room temperature by Fourier transform infrared (FTIR) and FT-Raman spectroscopies. The spectra of the molecule have been recorded in the regions 4000-50 cm(-1) and 3500-100 cm(-1), respectively. Theoretical information on the optimized geometry, harmonic vibrational frequencies, infrared and Raman intensities were obtained by means of ab initio Hartree-Fock (HF) and density functional theory (DFT) gradient calculations with complete relaxation in the potential energy surface using 6-311++G(d,p) basis set. The vibrational frequencies which were determined experimentally from the spectral data are compared with those obtained theoretically from ab initio and DFT calculations. A close agreement was achieved between the observed and calculated frequencies by refinement of the scale factors. The infrared and Raman spectra were also predicted from the calculated intensities. Thermodynamic properties like entropy, heat capacity, zero point energy have been calculated for the molecule. Unambiguous vibrational assignment of all the fundamentals was made using the potential energy distribution (PED).     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 5-chloro-10-oxa-3-thia-tricyclo[5.2.1.0(1,5)]dec-8-ene-3,3-dioxide

The IR spectra of 5-chloro-10-oxa-3-thia-tricyclo[5.2.1.0(1,5)]dec-8-ene-3,3-dioxide (COTDO) has been recorded in the region 4000-525cm(-1). The optimized molecular geometry, frequency and intensity of the vibrational bands of COTDO in the ground state has been calculated using the Hartree-Fock and density functional using Becke's three-parameter hybrid method with the Lee, Yang, and Parr correlation functional methods with 6-31G(d,p) and 6-311G(d,p) basis sets. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental IR spectra. The calculated geometrical parameters and harmonic vibrations are predicted in a very good agreement with the experimental data. The theoretical vibrational spectra of the title compound were interpreted by means of potential energy distributions (PEDs) using VEDA 4 program. With the help of this modern technique we were able to complete the assignment of the vibrational spectra of the title compound.     

Density functional theory calculation and vibrational spectroscopy study of 2-amino-4,6-dimethyl pyrimidine (ADMP)

The solid phase FTIR and FT-Raman spectra of 2-amino-4,6-dimethyl pyrimidine (ADMP) have been recorded in the regions 4000-400 cm(-1) and 3500-50 cm(-1) respectively. The structure was investigated by utilizing density functional theory (DFT) calculations with the Becke 3-Lee-Yang-Parr (B3LYP) method employing the 6-31+G and 6-311++G basis sets. The optimized geometrical parameters obtained by B3LYP method show good agreement with experimental data. Complete vibrational assignments were made on the basis of normal coordinate analysis (NCA) for the molecule. The infrared and Raman spectra were also predicted from the calculated intensities. The observed and the calculated spectra were found to be in good agreement. The thermodynamic properties like entropies and their correlations with temperatures were also obtained from the harmonic frequencies of the optimized structures.     

Experimental and theoretical studies on the identification of p-biphenyloxycarbonylphenyl acrylate

This study presents the identification of a title compound, p-biphenyloxycarbonylphenyl acrylate by means of experimental and theoretical evidences. The spectroscopic properties of the compound were experimentally investigated by Fourier transformation-infrared spectra (in the region 400-4000 cm(-1)) and nuclear magnetic resonance (NMR) chemical shifts (with a frequency of 400 MHz). Moreover, the optimized molecular structures, vibrational frequencies including infrared intensities and Raman activities, corresponding vibrational spectra interpreted with the aid of normal coordinate analysis based on scaled density functional force field, thermodynamic properties, atomic charges and ultraviolet-visible (UV-vis) spectra were analyzed utilizing ab initio Hartree-Fock (HF) and Density Functional Theory (B3LYP) methods at 6-31G(d,p) calculation level. It was found that the vibrational frequencies and chemical shifts obtained were shown to have a good agreement with available experimental results. We not only simulated frontier molecular orbitals (FMO) and molecular electrostatic potential (MEP) but also evaluated the transition state and energy band gap clearly.     

Structures and vibrational frequencies of 2-naphthoic acid and 6-bromo-2-naphthoic acid based on density functional theory calculations

The solid phase mid FTIR and FT Raman spectra of 2-naphthoic acid (NA) and 6-bromo-2-naphthoic acid (BNA) have been recorded in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The fundamental vibrational frequencies and intensities of the vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP method and 6-311+G** basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

FT-IR, FT-Raman, NMR and UV-vis spectra, vibrational assignments and DFT calculations of 4-butyl benzoic acid

The solid phase FTIR and FT-Raman spectra of 4-butyl benzoic acid (4-BBA) have been recorded in the regions 400-4000 and 50-4000cm(-1), respectively. The spectra were interpreted in terms of fundamentals modes, combination and overtone bands. The structure of the molecule was optimized and the structural characteristics were determined by density functional theory (DFT) using B3LYP method with 6-311++G(d,p) as basis set. The vibrational frequencies were calculated for monomer and dimer by DFT method and were compared with the experimental frequencies, which yield good agreement between observed and calculated frequencies. The infrared and Raman spectra were also predicted from the calculated intensities. (13)C and (1)H NMR spectra were recorded and (13)C and (1)H nuclear magnetic resonance chemical shifts of the molecule were calculated using the gauge independent atomic orbital (GIAO) method. UV-visible spectrum of the compound was recorded in the region 200-400nm and the electronic properties HOMO and LUMO energies were measured by time-dependent TD-DFT approach. The geometric parameters, energies, harmonic vibrational frequencies, IR intensities, Raman intensities, chemical shifts and absorption wavelengths were compared with the available experimental data of the molecule.