Surfactant-mediated desorption of polymer from the nanoparticle interface

The surfactant-mediated desorption of adsorbed poly(vinylpyrrolidone), PVP, from anionic silica surfaces by sodium dodecyl sulfate, SDS, was observed. While photon correlation spectroscopy shows that the size of the polymer-surfactant-particle ensemble grows with added SDS, a reduction in the near-surface polymer concentration is measured by solvent relaxation NMR. Volume fraction profiles of the polymer layer extracted from small-angle neutron scattering experiments illustrate that the adsorbed polymer layer has become more diffuse and the polymer chains more elongated as a result of the addition of SDS. The total adsorbed amount is shown to decrease due to Coulombic repulsion between the surfactant-polymer complexes and between the complexes and the anionic silica surface.     

The role of complex formation in the flocculation of negatively charged sols with anionic polyelectrolytes

Summary Flocculation of negatively charged colloids by anionic polyelectrolytes, resulting from the adsorption of polymers on the colloid surface and from bridging of polymer chains between solid particles, is only possible if an appropriate concentration of electrolyte is present in the solution. Complex formation in the immediate vicinity of the sol surface between the counter cation and the functional groups of the polyelectrolyte plays a major role in the attachment of anionic polyelectrolytes to negative hydrophobic sols.Stability constants for Cu(II) polyacrylate and for the Ca complexes of a polyacrylic acid, hydrolyzed polyacrylamide and polystyrene sulfonate have been determined, and the effect of solution variables upon flocculation of AgBr/Br^– sols by anionic polyelectrolytes have been investigated. Ca⁺² ions affect the adsorption of polystyrenesulfonate on a negatively polarized mercury surface, as reflected in measurements of the differential capacitance; the presence of complex bound functional groups apparently changes the structure and orientation ability of the adsorbed polymer.With 5 figures in 10 details and 2 tables     

Quenching of photo-excited state of copolymer pendant Ru(bpy) complexes with methylviologen

Copolymer pendant tris(2,2′-bipyridine)ruthenium(II) complexes were prepared from the copolymers of 4-methyl-4′-vinyl-2,2′-bipyridine with styrene, acrylic acid, methyl methacrylate, hydroxyethyl methacrylate, acrylonitrile, N-vinylpyrrolidone, 4-vinylpyridine, and quaternized 4-vinylpyridine. The quenching of the photo-excited state of the polymer complexes by methylviologen was studied. Pendant anionic groups such as acrylate enhanced remarkably the quenching of the cationic sensitizer by the cationic substrate, however, pendant cationic groups such as quaternized pyridine did not affect the reaction. The polymer chain showed generally retarding effect on the quenching reaction.     

Interactions of a hydrophobically modified polymer with oppositely charged surfactants

The interaction of a hydrophobically modified anionic polymer (PMAOVE) with a cationic surfactant (DTAB) was studied using a multi-technique approach: turbidity, surface tension, and viscosity measurements, as well as EPR (5-doxyl stearic acid) and fluorescence (pyrene) probe techniques were used. In the investigated pH range (4-10), the cationic surfactant headgroups interact with the anionic carboxylic groups of the polymer backbone. In addition, nonpolar interactions of the surfactant chains with the n-octyl chains of PMAOVE stabilize the PMAOVE-DTAB complexes. Charge neutralization of the anionic polymer by the cationic surfactant leads to precipitation of the PMAOVE-DTAB complex at a certain DTAB concentration range. Further addition of DTAB causes a charge reversal of the complex and, subsequently, resolubilization of the precipitate. At an acidic pH (pH = 4), a second precipitation was observed, which is probably caused by conformational changes in the PMAOVE-DTAB complex. This second precipitate can be resolubilized by further addition of surfactant. At a neutral and basic pH, this second precipitation is absent. EPR analysis indicates that the surfactants form an ordered structure at the extended polymer chain at a neutral and basic pH, whereas at an acidic pH, a less ordered surfactant layer is formed on the coiled polymer with more hydrophobic microdomains.     

Physicochemical and biological properties of polyampholytes: Quaternized derivatives of poly(4-vinylpyridine)

The modification of poly(4-vinylpyridine) with ω-bromocarboxylic acids and alkyl bromides yields three types of polyampholytes: polyampholytes containing both cationic and anionic groups in each monomer unit (polybetaines), polyampholytes containing betaine and cationic units, and polyampholytes containing betaine units and side cetyl radicals. Their complex formation with liposomes formed from zwitterionic (electroneutral) phosphatidylcholine and anionic diphosphatidylglycerol (cardiolipin) is investigated. The method for fixation of polymers on the liposomal membrane and the stability of the formed complexes are determined by the chemical structure of macromolecules. For the most part, polyelectrolytes are electrostatically adsorbed on the membrane and are fully removed from it with an increase in the salt concentration in the surrounding solution. An exception is the polybetaine obtained through the modification of poly(4-vinylpyridine) with ω-bromobutyric acid, which irreversibly binds to liposomes probably owing to the incorporation of macromolecular fragments into the hydrophobic part of the lipid bilayer. The insertion of side cetyl radicals into polybetaine molecules stabilizes their complexes with liposomes in the presence of salts. The cytotoxicity of the synthesized polyampholytes is one to two orders of magnitude lower than that of a cationic polymer with the same degree of polymerization.     

Use of beta-cyclodextrins to prevent modifications of the properties of carbopol hydrogels due to carbopol-drug interactions

Carbomers are carboxyvinylic derivatives that are widely used in the manufacture of hydrogel dosage forms. Because of their anionic nature and large number of acid groups, they tend to interact with cationic substances, and with other hydrophilic polymers containing alcohol groups. Here, we report a study of interactions between the carbomer Carbopol and the cationic drug propranolol hydrochloride in the solid state and in solution, and of the effects of such interactions on the properties of the hydrogel. We found that the drug forms an insoluble ionic complex with the polymer, modifying all of the hydrogel properties studied (swelling, release, bioadhesion). The inclusion of beta-cyclodextrin in the formulation reduces polymer/drug interactions, so that hydrogel properties remain unchanged. This is probably attributable to formation of inclusion complexes of beta-cyclodextrin and the drug, so that the drug is prevented from interacting with the polymer.     

Preparation of fluorine-containing polyethers

Polyethers were prepared from 3,3,3-trifluoro-1,2-epoxypropane by using both cationic and anionic initiators. Aluminum chloride and boron trifluoride were the two cationic initiators investigated. The polymer obtained with the use of aluminum chloride contained no functional endgroups other than hydroxyl, while the polymer prepared with boron trifluoride contained some terminal unsaturation. Potassium hydroxide and the monosodium salt of hexafluoropentanediol were investigated as anionic initiators. The polymer obtained by using potassium hydroxide also contained terminal unsaturation, while the polymer prepared with the monosodium salt of hexafluoropentanediol was terminated with primary hydroxyl groups capable of being used in polyurethanes. All polymers had molecular weights in the range from 970 to 4300. A fluorine-containing polyformal was prepared in high yield by the reaction of hexafluoropentanediol with trioxane. The same polymer was obtained in poor yield by the reaction of hexafluoropentanediol with dibutyl formal. Ring-opening polymerizations were attempted on two fluorinated cyclic ethers, 2,2,3,3,4,4-hexafluoropentamethylene oxide and 3,3,4,4-tetrafluorotetramethylene oxide. There was no reaction with anionic initiators. With most of the cationic initiators, there was no reaction. Boron trifluoride and phosphorus pentafluoride formed complexes with the ether, but would not cause ring opening.     

Foaming and foam stability for mixed polymer-surfactant solutions: effects of surfactant type and polymer charge

Solutions of surfactant-polymer mixtures often exhibit different foaming properties, compared to the solutions of the individual components, due to the strong tendency for formation of polymer-surfactant complexes in the bulk and on the surface of the mixed solutions. A generally shared view in the literature is that electrostatic interactions govern the formation of these complexes, for example between anionic surfactants and cationic polymers. In this study we combine foam tests with model experiments to evaluate and explain the effect of several polymer-surfactant mixtures on the foaminess and foam stability of the respective solutions. Anionic, cationic, and nonionic surfactants (SDS, C(12)TAB, and C(12)EO(23)) were studied to clarify the role of surfactant charge. Highly hydrophilic cationic and nonionic polymers (polyvinylamine and polyvinylformamide, respectivey) were chosen to eliminate the (more trivial) effect of direct hydrophobic interactions between the surfactant tails and the hydrophobic regions on the polymer chains. Our experiments showed clearly that the presence of opposite charges is not a necessary condition for boosting the foaminess and foam stability in the surfactant-polymer mixtures studied. Clear foam boosting (synergistic) effects were observed in the mixtures of cationic surfactant and cationic polymer, cationic surfactant and nonionic polymer, and anionic surfactant and nonionic polymer. The mixtures of anionic surfactant and cationic polymer showed improved foam stability, however, the foaminess was strongly reduced, as compared to the surfactant solutions without polymer. No significant synergistic or antagonistic effects were observed for the mixture of nonionic surfactant (with low critical micelle concentration) and nonionic polymer. The results from the model experiments allowed us to explain the observed trends by the different adsorption dynamics and complex formation pattern in the systems studied.     

Viscosity behavior of poly(glyceryl methacrylate) in the presence of borate and phenylboronate ions

The viscosity behavior of polyelectrolyte solutions induced by borate or phenylboronate complexation with poly(glyceryl methacrylate) (PGM) has been investigated. In dilute solutions borate ions can form monodiol (1/1) complexes and didiol (2/1) intramolecular complexes. Both types of complex are anionic. Thus, the polymer is characterized by the existence of charged sites on the chain and loops formed by intramolecular complexation. On the contrary, phenylboronate can only give monodiol 1/1 complexes. In the presence of passive salt, the charges are screened. By addition of borate ion to a PGM solution, a decrease of the initial polymer viscosity due to loop formation is first observed, then the anionic charges fixed on the chain by complex formation induce an expansion of the polyelectrolyte and the viscosity of the solution increases. The situation is different for the PGM-phenyl boronate system, where no intramolecular crosslink is present. In this case the viscosity of the solution increases with phenyl boronate concentration. But for a fixed complexing ion concentration it will tend to that of the neutral polymer when NaCl is added. ©1995 John Wiley & Sons, Inc.     

Recovery of Metal Ions by Chitosan: Sorption Mechanisms and Influence of Metal Speciation

Chitosan is characterized by a high affinity for metal ions due to its high content of amine groups. The sorption mechanism depends on both the protonation of these amine groups and the speciation of metal ions. Metal cations may be adsorbed at pH close to neutrality by chelation mechanism while metal anions can be adsorbed in acidic solutions through ionic interactions with protonated amine groups. Several examples are considered. The first example focuses on Cd sorption, which proceeds by a chelation mechanism on free non‐protonated amine groups in neutral media. In acidic solutions the protonation of amine groups limits the ability of amine groups to complex Cd. The cross‐linking of chitosan with glutaraldehyde also results in a dramatic decrease of sorption properties due to the decrease in the density of complexation sites available for sorption. The sorption of vanadium(V) and molybdenum(VI) illustrates the high capacity of chitosan for the sorption of oxo‐anions. They are very efficiently sorbed in acidic solutions by ionic interactions. The correlation of sorption capacities with the distribution of metal species shows that the sorbent has a greater affinity for highly charged anionic species. The sorption of complex anionic species such as chloro‐complexes of Pd and Pt; and that of copper complexed with organic ligands have also been studied. The optimum conditions for sorption are obtained when anionic complexes predominate in the solution. The chemical modification of chitosan, obtained by grafting of sulfur compounds, allows modifying the sorption mechanism: the ion‐exchange polymer is transformed to a dual ion‐exchange and chelating polymer.

Copper sorption isotherm in presence of sodium citrate (0.004 M ) (? RNH: fraction of protonated amine groups; ACuC: total fraction of anionic copper complexes; Cu‐FAL: total fraction of copper‐free anionic ligands).     

Structure and characteristics of the complexes between polyampholites and anionic liposomes

Polyampholites are synthesized by the alkylation of poly-4-vinylpyridine with ω-bromocarboxylic acids, and their interaction with the negatively charged bilayer lipid vesicles (liposomes) is studied. In the above polymers, quaternized pyridine units are zwitterion (betaine) groups, in which cationic and anionic groups are linked by the -(CH₂) _n -bridges. Via the methods of fluorescence, laser scattering, and DSC, the length of the ethylene spacer in the betaine group is shown to control the ability of the polymer to interact with anionic liposomes and induce structural rearrangements in the liposomal membrane. At n = 1, polybetaine is not linked to anionic liposomes. At n = 2, polybetaine is sorbed on the membrane, but it causes no dramatic structural rearrangements in the bilayer. At n = 3, the adsorption of polybetaine triggers the lateral segregation of lipids in the outer membrane layer. At n = 5, adsorption of polymer is accompanied by the lateral segregation and flip-flop of lipid molecules; as a result, all anionic membrane lipids are involved in the microphase separation. This evidence is of evident interest for the controlled design of polymers and related complexes and conjugates for biomedical applications.     

Efficient and non-denaturing membrane solubilization combined with enrichment of membrane protein complexes by detergent/polymer aqueous two-phase partitioning for proteome analysis

It is of central interest in membrane proteomics to establish methods that combine efficient solubilization with enrichment of proteins and intact protein complexes. We have investigated the quantitative and qualitative solubilization efficiency of five commercially available detergents using mitochondria from the yeast Saccharomyces cerevisiae as model system. Combining the zwitterionic detergent Zwittergent 3-10 and the non-ionic detergent Triton X-114 resulted in a complementary solubilization of proteins, which was similar to that of the anionic detergent sodium dodecyl sulfate (SDS). The subsequent removal of soluble proteins by detergent/polymer two-phase system partitioning was further enhanced by addition of SDS and increasing pH. A large number of both integral and peripheral membrane protein subunits from mitochondrial membrane protein complexes were identified in the detergent phase. We suggest that the optimized solubilization protocol in combination with detergent/polymer two-phase partitioning is a mild and efficient method for initial enrichment of membrane proteins and membrane protein complexes in proteomic studies.     

Controlled adsorption-desorption of cationic polymers on the surface of anionic latex particles

The complexation of anionic latex particles with two series of cationic copolymers is studied. The copolymers of the first series contain cationic and electroneutral (zwitter ion) hydrophilic units. The electrostatic adsorption of these copolymers on the surface of latex particles is accompanied by the formation of multiple salt bridges between cationic copolymer units and surface anionic groups. The dependence of ultimate adsorption on the molar fraction of cationic groups in copolymer α is described by a bell-shaped curve with a maximum at α = 0.05−0.10 and a long horizontal portion at α > 0.24. In terms of the adsorption theory of polyampholytes, such a pattern of the adsorption curve results from the compromise between the attraction of polymer chains to the surface induced by their polarization in the electric field of particles and the repulsion of like charged macromolecular units. The stability of complexes with the copolymers of the first series in water-salt media increases with an increase in α. The copolymers of the second series contain cationic and hydrophobic units. In this case, an increase in α is accompanied by a decrease in the amount of the adsorbed polymer throughout the studied α range (0.24–1). The complexes are stabilized not only via electrostatic interactions but also via hydrophobic interactions. A decrease in α decreases the role of electrostatics in stabilization of the complexes; however, this effect is compensated for by an increase in the number of hydrophobic contacts. This allows the stability of complexes to be preserved in concentrated water-salt solutions. The results of this study indicate that the stability of interfacial layers with the participation of cationic copolymers can be changed in a wide range by varying the ratio of ionic and electroneutral (hydrophilic or hydrophobic) comonomers in macromolecules.     

The Interaction between High-Molecular-Weight Flocculents and Ionic Surfactants

The interaction between the anionic and cationic polyelectrolytes of various molecular masses and charges and the ionic surfactants in aqueous and salt solutions is studied by viscometry, conductometry, light scattering, and electrophoresis. Oppositely charged molecules of surfactant and polymer form strong complexes due to the forces of electrostatic attraction that is manifested in a significant decrease in the viscosity and light transmission, as well as in the relative reduction in solution conductivity. As the surfactant/polyelectrolyte ratio increases, the forming complexes precipitated and then dissolved again. In the case of strongly charged polyelectrolytes, the partial dissolution of precipitates was observed preceding the wide region of destabilization. In this region, the value of surfactant/polyelectrolyte charge ratio reaches 3–4. The interaction between the cationic surfactants and anionic polyelectrolyte increases with the lengthening of alkyl radical, thus indicating the presence of cooperative interactions between the surfactant molecules bonded to polymer and the important role of relevant hydrophobic interactions. As a result, the interaction between the high-molecular-weight anionic polyelectrolytes and anionic surfactants containing aromatic core takes place in some cases.     

Block polymethacrylonitrile copolymers based on a central polyether or polyacetal block: A study of the salt/copolymer complexes

Some block copolymers based on polymethacrylonitrile (PMAN) and polyethers or polyacetals were synthesized in an anionic way. To appreciate the salt/polymer interactions, polymer electrolytes were prepared by the dissolution of lithium imide or lithium perchlorate in PMAN homopolymer and copolymers. The investigation of the triblock copolymer complexes allowed the solvating competition between nitrile‐ and ether‐ or acetal‐functional groups to be highlighted. The polydioxolane solvating ability was equivalent to that of PMAN but lower than that of polyoxyethylene or polyoxypropylene. Moreover, we were interested in the salt effect as block compatibilization was concerned. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3665–3673, 2005     

Block polymer preparation via both anionic and free radical polymerization

A new method of block polymer preparation using combined anionic and free radical polymerization was investigated. In the method the first monomer was polymerized anionically. The resulting polymeric anions were then reacted with an episulfide to form a polymer with mercaptan end-groups. This mercapto—polymer was mixed with a second monomer(s) in an inert solvent for the free radical polymerization. Conventional free radical initiation methods were used to initiate the polymerization of the second monomer but because of the high chain transfer constant of the mercaptan groups, a large number of the free radical chains would grow from the first polymer to form a block polymer. Block polymers difficult or impossible to make by direct anionic polymerization can thus be prepared. Several block polymers, including the new thermoplastic elastomers, poly[(styrene-co-acrylonitrile)-b-butadiene-b-(styrene-co-acrylonitrile)] and poly(bromostyrene-b-butadiene-b-bromostyrene) were prepared by this method.     

Effect of Charge and Hydrophobicity on Adsorption of Modified Starches on Polyester

Polyester fabric (poly(ethylene terephthalate)) is a hydrophobic polymer. Its hydrophobic nature can be a disadvantage for certain applications like dyeing, finishing, detergency, etc. Physical or chemical modification of the polyester to make it more hydrophilic is therefore desirable for certain performance characteristics. Surface modification of polyester to make it hydrophilic can be achieved by adsorbing polymers on the polyester surface. Starch is a commonly available, hydrophilic polymer used in many textile applications that can be used to modify polyester. However, it needs to be chemically modified so that it can adsorb on the polyester fabric and physically modify the fabric characteristics. The polymers used in this study are two different modified starches—cationic and anionic starches and mixtures of the two. The adsorption kinetics on a polyester substrate was studied. The effect of charge and hydrophobicity on adsorption was investigated. Cationic starches were shown to readily adsorb on polyester and this was attributed to electrostatic interactions. Hydrophobic substituents on the cationic moiety resulted in increased adsorption. This was attributed to the weak hydrophobic interaction between the polymer chains which could result in a more coiled polymer conformation. It is hypothesized that more starch molecules are required for surface coverage of the polyester, resulting in an increase in adsorption. Anionic starch was adsorbed on the substrate but at a slower rate than the cationic starches. It is likely that there is a H bonding between acid groups on the starch and the ester groups of the polyester. However, the anionic starch is desorbed when the polyester is placed in an aqueous medium. When a blend of cationic starch and anionic starch was used, a low concentration of anionic starch was seen to increase adsorption, indicating that the polyelectrolyte complex itself may be adsorbing on the substrate. Further increases cause a decrease in adsorption as no sites may be available on the complex for adsorption. When hydrophobic substituents are present, addition of the anionic starch causes a decrease in adsorption at all concentrations. This was attributed to the “crosslinking” between the hydrophobically modified starch and the anionic polymer.     

Dynamic ordering transitions of liquid crystals driven by interfacial complexes formed between polyanions and amphiphilic polyamines

We report the design of an amphiphilic polyamine (polymer 1) based on poly(2-alkenyl azlactone) that strongly couples the formation of polyelectrolyte complexes at aqueous/liquid crystal (LC) interfaces to ordering transitions in the LC. We demonstrate that the addition of a strong anionic polyelectrolyte to aqueous solutions in contact with polymer 1-laden LC interfaces (prepared by Langmuir-Schaefer transfer of monolayers of polymer 1 onto micrometer-thick films of nematic LC) triggers ordering transitions in the LCs. We further demonstrate that changes in the ordering of the LCs (i) are driven by electrostatic interactions between the polyelectrolytes, (ii) involve multivalent interactions between the polyelectrolytes, and (iii) are triggered by reorganization of the hydrophobic side chains of amphiphilic polymer 1 upon formation of the interfacial complexes. The results presented in this paper lead us to conclude that ordering transitions in LCs can be used to provide insights into the structure and dynamics of interfacial complexes formed between polyelectrolytes.     

Polymer assembly exploiting three independent interactions

Three independent polymer/polymer complexing mechanisms were used to assemble polymer trilayers onto anionic surfaces in water. Polymer-surface and polymer-polymer attraction were driven by (1) electrostatic attraction between positive polymers bearing benzyl trimethyl ammonium chloride (BTM) groups and negative surfaces; (2) polyethylene glycol (PEG) binding to phenolic (Ph) groups; and (3) phenylboronate (PBA) binding to polyols. The approach was to prepare copolymers with the following pairs of compatible interacting groups: BTM/Ph, BTM/PEG, PBA/PEG, and PBA/Ph. The supporting surfaces were either silicon or anionic self-assembled on gold. The ultimate goal is to employ independent polymer/polymer interactions to prepare complex assemblies in a few steps.     

Improved complementary polymer pair system: switching for enzyme activity by PEGylated polymers

The development of technology for on/off switching of enzyme activity is expected to expand the applications of enzyme in a wide range of research fields. We have previously developed a complementary polymer pair system (CPPS) that enables the activity of several enzymes to be controlled by a pair of oppositely charged polymers. However, it failed to control the activity of large and unstable α-amylase because the aggregation of the complex between anionic α-amylase and cationic poly(allylamine) (PAA) induced irreversible denaturation of the enzyme. To address this issue, we herein designed and synthesized a cationic copolymer with a poly(ethylene glycol) backbone, poly(N,N-diethylaminoethyl methacrylate)-block-poly(ethylene glycol) (PEAMA-b-PEG). In contrast to PAA, α-amylase and β-galactosidase were inactivated by PEAMA-b-PEG with the formation of soluble complexes. The enzyme/PEAMA-b-PEG complexes were then successfully recovered from the complex by the addition of anionic poly(acrylic acid) (PAAc). Thus, dispersion of the complex by PEG segment in PEAMA-b-PEG clearly plays a crucial role for regulating the activities of these enzymes, suggesting that PEGylated charged polymer is a new candidate for CPPS for large and unstable enzymes.