Molecular spectra of nitroisoxazolinones

A study is made of IR and UV spectra of N-oxides of nitroisoxazolinones, and of derivatives of isoxazolidine and isoxazolizidine. Absorption bands are related to valence vibrations of N-O in the NO₂ group; in conjugated systems (in N-oxides of nitroisoxazolines) _s and _as are equal to 1310 and 1510 cm^–1, in nonconjugated systems (in nitroisoxazolidines) 1360 and 1560 cm^–1, respectively. Frequencies of N-O bond vibrations in N-oxides appear in the region 830–870 cm^–1, of the O-N-O fragment in isoxazolidines and isoxazolizidines in the 1010–1060 cm^–1 region. Measurements are made of total intensities of N-O valence vibrations in the NO₂ group in N-oxides of nitroisoxazolines and nitroisoxazolizidines, as well as of C=N valence vibrations in N-oxides of nitroisoxazolines.     

Tail-end purification of americium from plutonium loading effluents using a mixture of octyl (phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide and tri-N-butyl phosphate

The tail-end purification of Am from Pu loading effluents in 7.5M HNO₃ containing 160 mg l^–1 Am and 1.2 mg l^–1 Pu has been carried out. With 0.2M CMPO+1.2M TBP in dodecane as the extractant and stripping by 0.04M HNO₃+0.05M NaNO₂, the Pu level is brought down to 31.2 g l^–1. When the acidity was reduced to 4.2M HNO₃, one contact with 20% TLA/dodecane and subsequent extraction by a mixture of CMPO and TBP and stripping with 0.04M HNO₃+0.05M NaNO₂ gave Am samples without any detectable amounts of Pu. The recovery of Am was 90% by the first procedure and 98% by the second one.     

Infrared spectral analysis during the thermal decomposition of pure and irradiated crystalline NH4ClO4

Variable temperature /303–553 K/ IR spectroscopic studies are made during thermal decomposition of pure and -treated ammonium perchlorate /AP/. Decomposition is enhanced by radiation or in the presence of an additive /Gd₂O₃/. Intensity of the stretching /1100 cm^–1/ and bending /625 cm^–1/ frequencies of ClO ₄ ^– decrease on heating the KBr matrix even below 360 K. Above this temperature, a broad band develops over 480–510 cm^–1 in the pure and -treated AP which is attributed to ClO ₃ ^– /₄/.     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.     

The composition of volatile and particulate hydrocarbons in urban air

Summary The hydrocarbon composition of the particle and gas phases in the urban atmosphere has been studied by filtration and parallel adsorption on active charcoal and polyurethane foam (PUF). Gas chromatography (GC) and GC coupled to mass spectrometry (GC-MS) have been used for the analysis of the organic matter extracts obtained with each system. In the case of the particle and PUF samples these extracts were fractionated into aliphatic and aromatic compounds. This approach has allowed to identify up to 247 hydrocarbon molecules showing that C0–C5 alkylbenzenes are the major compounds in the charcoal extracts whereas C14–C23 n-alkanes, C0–C4 alkylnaphthalenes, C0–C4 alkylbiphenyls and C3–C5 alkylbenzenes are those predominantly found in the PUF materials. The particles essentially contain C17–C38 n-alkanes and parent polycyclic aromatic hydrocarbons (PAH). These qualitative differences are paralleled by a progressive concentration decrease from the more to the less volatile hydrocarbons. Thus, the total charcoal extracts average 80 g/m³, the PUF compounds represent 4 /m³ and the particle hydrocarbons 0.7 g/m³. These latter airborne materials are essentially composed of petrogenic residues 0.6 g/m³ (aliphatic fraction) whereas the pyrolytic PAH only involve 0.08 g/m³.     

Neue τ-Boride

The following -borides have been synthesized: Cr₁₃Ir₁₀B₆, Mn₁₆Ir₇B₆, Fe_10–15.4Ir_13–7.6B₆, Co₁₅Ir₈B₆.

---

---

Mit 1 Abbildung

---

Herrn Prof. Dr.A. Knappwost in Freundschaft gewidmet.     

Adsorptive Catalytic Voltammetry of Physcion in the Presence of Dissolved Oxygen at a Carbon Paste Electrode

A novel electroanalytical method for the determination of physcion is described for the first time. Physcion yields an adsorption catalytic voltammetric peak at –0.74V (vs. SCE) in 0.4molL^–1 NH₄Cl–NH₃·H₂O buffer solution (pH 10.5) at a carbon paste electrode (CPE). The experimental results indicated that physcion is efficiently accumulated at a CPE by adsorption. In the subsequent potential scan, physcion was reduced to a homologous anthrahydroquinone compound. The compound was then immediately oxidized to physcion by the dissolved oxygen in the solution, and then physcion was again reduced at the CPE. As a result, a cyclic catalytic reaction was established. The second-order derivative peak current is proportional to the physcion concentration in the ranges of 2.0×10^–104.0×10^–9molL^–1 (accumulation 90s) and 4.0×10^–92.0×10^–8molL^–1 (accumulation 60s). The limit of detection is 8×10^–11molL^–1 (S/N=3) for a 120s accumulation time. The method was applied to the direct determination of physcion in the medicinal plant polygonum multiflorum Thumb with satisfactory results.     

The determination of tin in explosive materials by thermal neutron activation analysis

A method, based on the measurement of the -photopeak at 332 keV arising from a¹²⁴Sn(n, )^125mSn reaction, has been developed for the rapid measurement of Sn at concentrations of 20 g g^–1, present as the cross-linking agent, in explosive charges. The method is comparative, and has a limit of detection of 0.6 g g^–1 and a precision of 5% RSD. The method requires no sample preparation and is economical in effort.     

Conductivity of Aqueous Solutions of Low-Molecular Chitosan

Solutions of chitosan with molecular weight (MW) of 20000, 9600, and 3700 Da are studied conductimetrically and viscosimetrically. The dependence of solution conductivity on the chitosan concentration begins to deviate from linearity simultaneously with an abrupt increase in the solution viscosity starting from concentrations of 20–30 g l^–1. The fraction of free counterions (Cl^–, CH₃COO^–) in the 0.1 g-equiv l^–1 chitosan solutions significantly depends on the sample's MW. The charge is transferred in solutions predominantly by chloride and acetate ions, with the high-MW cation barely contributing to conduction.     

Effects of pH and Dye Concentration on the Optical and Structural Properties of Coumarin-4 Dye-Doped SiO2-PDMS Xerogels

Optical and structural properties of coumarin-4 dye-doped SiO₂-PDMS xerogels synthesized by acid catalyzed (one-step) and acid-base catalyzed (two-step) sol-gel routes with varying pH (0.6 to 7) and dye content ( 5 × 10^–4 to 5 × 10^–2 mole) are reported. Spectroscopic methods such as photo-luminescence, FT-IR and FT-Raman were used for characterizations. The acid catalyzed xerogels prepared with pH < 2.5 exhibited two fluorescence peaks, I at 390 nm and II at 480 nm. The acid-base catalyzed xerogels synthesized with pH < 2.5 also exhibited two peaks, I at 400 nm and II at 475 nm. Peak II was not observed for the samples with pH 2.5. This phenomenon was attributed to the existence of pH dependent different forms of coumarin-4 molecule. The concentration-quenching phenomenon was observed for the acid catalyzed xerogels prepared with different dye concentration. TheFT-IR spectra indicated the existence of hydrogen bonds between the carbonyl groups of dye molecules and the silanol groups of gel matrix. The hydrogen bonding was the highest for the samples with the extremity pH, 0.6 and 7, resulting in the highest dye/gel matrix interactions, hence, the highest fluorescence peaks. The Raman studies indicated that the samples prepared with pH < 2.5 possessed relatively more number of 3-membered siloxane rings than 4-membered siloxane rings. The ring statistics was reversed for the samples with pH > 2.5. The number of silanol groups was higher for the samples with pH > 2.5.     

Preparation and Application of a Novel Core-Shell Organic Nanoparticle as a Fluorescence Probe in the Determination of Nucleic Acids

A novel type of core-shell organic nanoparticles (pyrene/poly-acrylic acid; PAA) has been prepared by precipitation polymerization under ultrasonic irradiation. It was characterized by transmission electron microscopy (TEM) and fluorescence lifetime. The lifetime is about 5µs, which is much longer than conventional organic dyes fluorescence lifetime. As the surface of the core-shell organic nanoparticles is covered with abundant carboxylic groups, the nanoparticles are water-soluble, stable and biocompatible. At pH 6.4, maximum fluorescence is produced, with the maximum excitation and emission wavelengths of 338nm and 397nm, respectively. Under optimum conditions, the calibration graphs are linear over the range of 4.0×10^–51.0×10^–2mgmL^–1 for calf thymus DNA (ct-DNA) and 2.0×10^–41.0×10^–2mgmL^–1 for fish sperm DNA (fs-DNA). The detection limits were 3.6×10^–5mgmL^–1 and 1.4×10^–4mgmL^–1 for ct-DNA and fs-DNA, respectively. The method was applied to the determination of ct-DNA and fs-DNA in synthetic samples and the results were satisfactory. The method is sensitive, stable, rapid and tolerant towards most interfering substances.     

Metal Sorption,Solid Phase Extraction and Preconcentration Properties of Two Silica Gel Phases Chemically Modified with 2-Hydroxy-1-Naphthaldehyde

Active silica gel phase (I) was chemically modified to the corresponding amino- (SiNH₂) and chloro- (SiCl) derivatives via silylation reactions. These were used to synthesize two newly modified silica gel phases (II, III) by direct chemical reaction with 2-hydroxynaphthaldehyde (2-HNA). The surface coverage values are 370, 432µmolg^–1 and 320, 355µmolg^–1 for (II) and (III), on the basis of thermal desorption and metal probe testing method, respectively. The metal sorption properties of silica gel phases (II, III) were studied and compared with active silica gel phase (I). The maximum determined metal capacity values were found to be 10–110, 20–290 and 20–370µmolg^–1 for phases I, II and III, respectively. The distribution coefficient values (K_d) were also determined for a series of metal ions, and the results showed that the two new chemically modified phases (II and III) were highly selective for Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺. The potential applications of silica gel phases (II, III) as solid phase extractors for the same five metal ions spiked in drinking tap water (1.000µgmL^–1) were found to give percentage recovery values in the range of 90.2–96.3±4.1–6.3%, while pre-concentration of the same five metal ions spiked in drinking tap water (50.0ngmL^–1) was successfully accomplished with a percentage recovery range of 92.6–95.8±4.8–5.7%.Received December 16, 2002; accepted May 14, 2003 published online September 1, 2003     

Chemical composition of T-21 silica tubing and implications for neutron activation analysis

T-21 silica, a commonly used encapsulation material in neutron activation analysis of small samples, was analyzed by INAA to determine trace levels of the following impurities: Na, Sc, Cr, Fe, Co, Ni, Zn, Br, Sb, La, Ce, Sm, Tb, Hf and Au. In the unprocessed form supplied by the manufacturer, pieces of T-21 weighing 50 mg contain 6·10^–2 g Na; 9·10^–3 g Fe; 3·10^–7–7·10^–6 g light REE, Sc and Hf and 4·10^–8 g Tb and Au. In a series of glass-blowing steps, in which unfiltered gases were used for fuel, and cleaning steps, in which reagent grade aqua regia was used, irradiation vials were produced which contain higher average levels of Sc, La, Sm, Tb and Hf, by factors ranging from 1.3 for Sm to 11.5 for La, and lower average levels of Co, Na and Fe, by factors of 1.4, 2.0 and 4.0, respectively, than the unprocessed material. These contamination levels lead to blank corrections of 21% for La, 2.6% for Ce and 3.0% for Hf in 40 g samples of refractory inclusions from carbonaceous chondrites, if counted in their irradiation vials.     

Salicylaldehydo chelates of bis(cyclopentadienyl) zirconium(IV)

A new series of organometallic ionic chelates of the type [Cp ₂Zr(sal)]⁺ [ROCS₂/RRNCS₂]^–, where Hsal = salicylaldehyde;R =Me, Et, i-Pr ori-Bu andR =R =Me, Et, i-Pr;R =Me,R = benzyl orR =Et,R =m-tolyl, have been synthesized in aqueous medium by the reaction of [Cp ₂Zr(sal)]⁺Cl^– andROCS ₂ ^– K⁺/RRNCS ₂ ^– Na⁺. These compounds have been characterized by chemical analyses, electrical conductance, electronic, IR and¹H-NMR spectral studies. These studies indicate that the complexes are 1:1 electrolytes and the salicylaldehyde ligand is chelating in all these complexes. Therefore, a tetrahedral coordination about the zirconium atom is proposed.

---

Salicylaldehydo-Chelate von Bis(cyclopentadienyl)-zirkonium(IV)

Zusammenfassung Eine neue Gruppe von organometallischen ionischen Chelaten vom Typ [Cp ₂Zr(sal)]⁺ [ROCS₂/RRNCS₂]^– (mit Hsal = Salicyladehyd;R =Me, Et, i-Pr oderi-Bu undR =R =Me, Et, i-Pr;R =Me,R = Benzyl oderR =Et,R =m-Tolyl) wurde in wäßrigem Medium mittels der Reaktion von [Cp ₂Zr(sal)]⁺Cl^– mitROCS ₂ ^– K⁺/RRNCS ₂ ^– Na⁺ hergestellt. Die erhaltenen Verbindungen wurden mittels chemischer Analyse, elektrischer Leitfähigkeit und der IR- sowie¹H-NMR-Spektren charakterisiert. Diese Untersuchungen zeigen, daß die Komplexe 1:1-Elektrolyte sind, wobei der Salicylaldehyd-Ligand in allen Fällen an der Chelatbildung beteiligt ist. Es wird daher für das Zirkoniumatom eine tetrahedrale Koordination vorgeschlagen.

     

Anodic Dissolution of Palladium in Sulfuric Acid: An Electrochemical Quartz Crystal Microbalance Study

Regularities of formation of a palladium oxide layer and its cathodic reduction in 0.5 M H₂SO₄ at 0.5–1.3 V (SHE) are studied by cyclic voltammetry, x-ray photoelectron spectroscopy, and electrochemical quartz crystal microbalance. A pure Pd plate and a 0.5-m-thick Pd coating on gold-sputtered quartz crystal is used for electrochemical and microgravimetric studies. It is shown that a Pd electrode dissolves electrochemically in 0.5 M H₂SO₄ when its potential is cycled between 0.5 and 1.3 V. In the case of 0.5-m-thick Pd coating on the gold substrate, the decrease in the electrode weight during one anodic–cathodic cycle is 1.0–1.5 g/cm². It is suggested that anodic process at 0.5–1.3 V (SHE) represents electrochemical oxidation of palladium, yielding a surface layer of poorly soluble Pd(OH)₂ and/or PdO phases, as expressed by the equation Pd + 2H₂O (Pd(OH)₂/PdO)_s + 2H⁺ + 2e. This surface layer, (Pd(OH)₂/PdO)_s, undergoes reduction during the cathodic process. About 5% of the total amount of ionized palladium dissolve in electrolyte.     

Electrochemical Determination of Ascorbic Acid at γ-MnO<Subscript>2</Subscript> Modified Carbon Black Microelectrodes

A carbon black microelectrode modified by -MnO₂ has been prepared. The electrocatalytical oxidation of ascorbic acid (AA) at this microelectrode was investigated. The 2nd-order linear scan voltammograms of AA are recorded from –0.5 to 0.5V (vs. SCE). The relationship between the oxidation peak current of AA and its concentration in the range of 1.0×10^–64.0×10^–3molL^–1 is linear. The detection limit (3) was found to be 6.0×10^–7molL^–1. Also, the determination of AA in samples is evaluated, and the results are satisfactory.     

Optical Nanocomposite Planar Waveguides Doped with Rare-Earth and Noble Metal Elements

The present paper is focused on multilayer Er³⁺-doped silica-titania planar waveguides, co-doped with silver, which were prepared by spin-coating on silica glass, or buffered single crystal silicon substrates. The single layer thickness (0.4 m) and refractive index (1.60–1.63) were measured by spectroscopic ellipsometry at 715 nm. The thickness of the waveguides (measured by mechanical profilometry) was 1 m and their optical propagation losses were measured at different laser wavelengths (488 nm, 514 nm and 633 nm), exhibiting an approximately Rayleigh-like behavior. The thermal precipitation of silver nanocrystallites was achieved, both in air and under a controlled atmosphere (dry nitrogen) and these were characterized by visible absorption spectroscopy, which clearly showed the development of a plasmon absorption band near 415 nm, by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The Er³⁺ metastable level lifetimes for the emission at ca. 1.54 m were found to be ca. 4–6 ms, for Er³⁺ concentrations varying between 0.2–2.0 mol% (or (0.4–4.4) × 10²⁰ ions/cm³), but no significant variation was observed with the Ag concentration added (up to 2.5 mol%).     

Rate constants and mechanism of the reactions of N(4S) atoms with methane and ethane

The channel for the reaction of nitrogen atoms and methane yielding hydrogen atoms does not exceed 10% at 20C. The rate constant for the reaction of nitrogen atoms and ethane at 20C is (4 ± 2)·10^–16 cm³/sec.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 705–706, March, 1990.     

Interaction of Chloride Anion and Chlorine Atom with Indium and Gallium Surfaces: A Quantum-chemical Study

The adsorption of the chloride ion and chlorine atom on clusters simulating the surface of the (111) and (001) faces of the crystal lattice of indium and liquid gallium are calculated using the Hartree–Fock–Roothaan and density functional (B3LYP) quantum-chemical methods. The energy of adsorption of chloride ions from a gas phase at these faces increases in the following series: bridgehollow < on-top positions and equals to 179 kJ mol^–1 for In(111) and 183 kJ mol^–1 for gallium in the on-top position. Both metals exhibit similarity in the formation of bonds between their surface atoms and the adsorbate. The adsorbate charge does not depend on the adsorbed form (chloride ion or chlorine atom) and equals 0.5e. Parameter of a virial adsorption isotherm is estimated with allowance for coulombic interactions near the metal/electrolyte interface.     

Electrochemical Behavior of Epinephrine at a Penicillamine Self-Assembled Gold Electrode,and its Analytical Application

The fabrication and electrochemical characteristics of a penicillamine (PCA) self-assembled monolayer modified gold electrode were investigated. The self-assembled electrode shows obvious electrocatalytic activity for the oxidation of epinephrine (EP). In phosphate buffer (pH 7.73), a sensitive oxidation peak was observed at 0.190V with the PCA modified Au electrode. The peak current is proportional to the concentration of EP in the range of 2.0×10^–56.0×10^–4molL^–1 and 5.0×10^–6 2.0×10^–4molL^–1 for cyclic voltammetry (CV) and differential pulse voltammetry (DPV) with the detection limits of 1.8×10^–7 and 1.3×10^–7molL^–1, respectively. The possible reaction mechanism is also discussed. The PCA self-assembled monolayer modified gold electrode is highly stable and can be applied to the determination of EP in practical injection samples. Application is simple, rapid and produces accurate results.