微乳法制备纳米TiO2 /SiO2的结构及光催化研究

Nanosized TiO₂ and TiO₂/SiO₂ particles were prepared by hydrolysis of tetrabutyl titanate (TBOT) and tetraethyl orthosilicate (TEOS) in the TX-100 reverse microemulsion. These particles were characterized by TG-DSC, XRD, FTIR, TEM，N₂ adsorption-desorption. Their photocatalytic activity was tested by degradation of methyl orange. The result shows that TiO₂/SiO₂ nanoparticles are with a monodispersed spherical phase and a uniform size distribution，and TiO₂ particles are dispersed on the surface of SiO₂. The band for Ti-O-Si vibration in FTIR was observed, the Ti-O-Si bond increased the stability of anatase TiO₂, suppressed the phase transformation of titania from anatase to rutile. And due to the addition of SiO₂, the average size of titania decreased from 38 nm in pure TiO₂ to 5 nm in TiO₂/SiO₂. It was found, under UV light irradiation, TiO₂/SiO₂ particles showed higher activity than pure TiO₂, and TiO₂/SiO₂(1/1) particles showed the highest photocatalytic activity on the photocatalytic decomposition of methyl orange, which was influenced by crystal structure, particle size, crystallinity and Surface area Characteristics.     

水热改性对NiMo/γ-Al2O3加氢脱氮催化剂结构及性能的影响

The influence of hydrothermal modification on the structure and hydrodenitrogenation (HDN) activity of NiMo/γ-Al₂O₃catalyst was studied in the range 140～180 ℃. The experimental results indicated that the hydrodenitrogenation reaction rate of pyridine was accelerated using the NiMo/γ-Al₂O₃catalyst synthesized via hydrothermal route due to the change of the structure, the increase of the amount of Mo and Ni and the rise of the specific surface area. The change of the structure of catalysts was enhanced at higher hydrothermal temperature, producing NiMo/γ-Al₂O₃catalyst with better HDN activity.     

铜铬类水滑石的表征及其催化性能

The CuCr-Hydrotalcite-like Compounds were synthesized by co-precipitation method. The samples were characterized by XRD, FTIR and N₂-adsorption/desorption measurements. The catalytic performance of the material synthesized was evaluated for the synthesis of benzion methyl ether with benzaldehyde and methanol. The result show that well crystallized hydrotalcites are obtained when n_Cu/n_Cr molar ratio is 2.0 and final value of pH is 4.3±0.2. The crystal shape is remained the same while crystallinity, surface area, pore structure and activity vary with the molar ratio of Cu to Cr. The catalytic activity is the best when the molar ratio of Cu to Cr is 2.0 at 50 ℃ andreaction time is 90 min. The highest conversion of benzaldehyde could reach 89.56％,while the selectivity of benzoin methyl ether is nearly 100％.     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

TiO2 / SiO2核 / 壳结构复合粒子的组装及其电化学性能

TiO₂ coated SiO₂ materials as anode for lithium-ion batteries were synthesized via an in situ hydrolysis of tetraethyl orthosilicate under ultrasonic irradiation using nanometer-sized TiO₂ colloids as precursors. The XRD patterns indicate that the as-prepared core/shell particles remain anatase after calcining below 800 ℃. TEM observation shows that the particle size of TiO₂ / SiO₂ composites is ca. 200 nm, and a homogeneous SiO₂ layer is coated on the surfaces of TiO₂ particles. FTIR spectra demonstrate that SiO₂ could have been coated on the surfaces of TiO₂ particles via a chemical bonding. In addition, the first specific charge and discharge capacities of the coated particle electrode were 66.4 mAh·g^-1 and 90.7 mAh·g^-1, respectively, which indicates that the TiO₂ / SiO₂ particles are more stable than the monodispersed TiO₂. Meanwhile, the new material has good lithium intercalation-deintercalation performances.     

湿法水解制备可见光催化剂N/TiO2

The N/TiO₂ was prepared by wet hydrolyzation method. The photocatalytic decomposition of benzoic acid solution was carried out under simulated sun light; the photocatalytic activity was 2.47 times of TiO₂. The products were characterized by XRD, SPS, EFISPS and XPS, respectively. The results of XRD showed that the N could restrain the crystallization transformation of TiO₂ from anatase to rutile. The N/TiO₂ was still n-type semiconductor, and the absorbance wavelength appeared red-shifted by N-doping. The band gap of N/TiO₂ was decreased to 2.7 eV. The amount of doped-N is about 0.94at.%. The binding energy of N1s are 396.62 eV (Ti-N bonds, β-N) and 400.87 eV (N-N bonds, γ-N₂), respectively, and the photocatalytic activity of N/TiO₂ under visible light is related to the β-N. The N atoms replace the O of the TiO₂ and form the Ti-N bonding.     

微量吸附量热研究CuO/γ-Al2O3催化剂的表面酸碱性质

The γ-Al₂O₃ supported CuO samples were studied. XRD results showed that the loading and calcination temperature affected the surface structure. For example， CuO crystallite appeared at the CuO loading of 7% (about 0.82mmol/100m²) on the support. Both CuO crystallite and CuAl₂O₄ spinel were present when the CuO/γ-Al₂O₃ sample was calcined at the same temperature (400℃). Microcalorimetric adsorption of CO₂ and NH₃ revealed that the strength of both the acidity and basicity decreased with the increase of CuO loading for the CuO/γ-Al₂O₃ sample. The increase of calcination temperature further decreased the basicity while the acidity was not affected.     

[Mn(NH2NHCO2C2H5)3](NO3)2的晶体结构和热分解机理

[Mn(ECZ)₃](NO₃)₂ is newly prepared by the aqueous solutions of Mn(NO₃)₂ and ethyl carbazate (ECZ). The crystal structure has been determined by X-ray crystal diffraction analysis. It belongs to monoclinic with space group of P2₁/n. The crystal parameters are: a=1.3974(2) nm, b=0.8796(2) nm, c=3.4322(7) nm, β=91.25(1) °, V= 4.2175(1) nm³, Z=8. Its molecular weight is 491.30. Mn²⁺ is located on the center of the molecular structure. Ethyl carbazate serves as a bidentate ligand which coordinates to the metal cations with its carbonyl oxygen atom and the terminal hydrazine nitrogen atom, forming five-member chelating rings, and three such rings are formed in each molecule. The coordination number of the metal ion is six and the coordination configuration of the central ion is octahedral. Specially, antimer configuration phenomenon is found in the molecule. The complex is further characterized by element analysis and IR measurements. The thermal decomposition mechanism is studied by using TG-DTG and DSC techniques. CCDC: 215675.     

纳米固体超酸SO42-/TiO2的研究

The new nanosolid superacid catalyst SO₄^2-/TiO₂ is compounded with nanometer chemical technology. This catalyst SO₄^2-/TiO₂ has good catalytic effects on esterificational reactions of ethylic acid and ethyl alcohol. It has many other advantages such as strong water-proof quality, being able to be used repeatedly, being easy to be re-claimed, non-corroding, non-polluting. So it is a green industrial catalyst which is helpful to the environment and possesses wide prospect of applications. The crystallo-process, specific surface area and sulphur content of the SO₄^2-/TiO₂ system have been studied with the method of XRD, XPS and the chemical analysis, the result of which indicates that catalytic activity and acid strength of SO₄^2-/TiO₂ is affected by the H₂SO₄ saturant concentration, baking temperature, precipitating condition, specific surface area and sulphur content. The best preparation conditions of SO₄^2-/TiO₂ are: ageing temperature at 0℃, 0.5mol·L^-1 of H₂SO₄ concentration, baking temperature at 500℃and 3 hours of baking time.     

多重射流燃烧反应制备的TiO2/ SiO2纳米复合颗粒的形态和结构

TiO₂-SiO₂ nanocomposite particles were prepared in premixed H₂ / Air flame, and the morphology and structure of these nanocomposites were characterized by FTIR, XRD, TEM and HRTEM. The morphology of SiO₂ / TiO₂ nanocomposites was different from that of pure TiO₂ or SiO₂ nanoparticles, and the chemical bond of Ti-O-Si was found in the nanocomposites indicating that the TiO₂ / SiO₂ nanocomposites were not merely a physical mixture of TiO₂ and SiO₂. TiO₂ nanocrystalline grains with sizes of 1～2 nm were homogeneously dispersed in the amorphous SiO₂ matrix when TiCl₄ and SiCl₄ were mixed at molecular level in the flame. The particle size and rutile content decreased with increasing of SiO₂ molar ratio.     

磁场对乙酸乙酯合成影响的研究

近年来,有关外磁场对化学反应影响方面的研究十分引人注目,其研究范围以在非均相体系中进行的聚合反应、光化学反应和电化学反应居多,而对均相体系中的一些无机、有机反应却研究得很少。我们对在常温常压下磁场对合成乙酸乙酯反应的影响进行了一些探索,发现在均相体系中,磁场对该反应确有一定影响,该影响与磁处理时间、反应液流速、磁场的组合形式有关。     

气相色谱法测定白酒中乙酸乙酯的不确定度评定

依据JJF 1059-1999《测量不确定度评定与表示》、GB/T 10345-2007《白酒分析方法》,评定了气相色谱仪检测白酒中乙酸乙酯测量结果的不确定度。通过引入数学模型,对各不确定度分量进行了分析和计算。当白酒中乙酸乙酯的测定结果为1.17 g/L时,扩展不确定度为0.10 g/L(k=2)。     

THE INTERACTION OF ETHYL BENZOATE AND TRIFLUOROACETIC ACID IN EXCITED STATE

This paper is concerned with the interaction of ethyl benzoate (EBA) and trifluoroaceticacid (TFA) molecules in the excited state by measurements of steady--state and transient fluo-rescence spectra at room and low temperatures. The results show that not only the 1:1 exci-plex but also the 2:1 triplex between EBA and TFA was formed. The formation pathway ofthe triplex is that the exciplex formed at first, then by the interaction with the EBA mole-cule it transformed into triplex. But it could not be formed by the dimer of EBA by interac-tion with TFA. The dimer of EBA is confirmed in the concentrated solution. So there arefour components in EBA/TFA--concentrated solution and their fluorescence lifetimes aremeasured respectively.     

杂多酸催化剂连续法合成乙酸乙酯

乙酸乙酯是重要的化工原料,它是油漆、人造制革等的溶剂,也是制药、染料、香料等基本有机合成的原料。工业上乙酸乙酯多采用硫酸法间歇生产,存在着设备腐蚀、环境污染、生产不连续、选择性差、最高收率只有70％左右等缺点。近年来有人用分子筛、固载杂多酸为催化剂进行气相合成,活性高,选择性好,但存在着催化剂易流失,原料需汽化到150℃,产品酸值和醇含量不易控制等缺点。我们采用饱和1:12系     

气相色谱法同时测定空气中痕量乙酸乙酯和乙酸乙烯酯

建立了气相色谱法测定环境空气中乙酸乙酯和乙酸乙烯酯的方法。采用活性炭吸附空气和废气中的乙酸乙酯和乙酸乙烯酯,用二氯甲烷解析,经大口径毛细管柱分离,气相色谱-氢火焰离子化检测器检测,乙酸乙烯酯和乙酸乙酯的线性响应良好,相关系数不小于0.999 0。方法灵敏度高,检出限达到0.05μg,回收率为97.0%~105.0%,相对标准差不大于2.56%(n=5),该法适合环境空气和工业废气中乙酸乙酯和乙酸乙烯酯的监测。     

苯乙烯和丙烯酸-β-羟乙酯不同温度的竞聚率测定

苯乙烯和丙烯酸 β 羟乙酯不同温度的竞聚率测定吴平平吴玉芳陆琛杨全兴韩哲文（华东理工大学材料科学研究所上海２００２３７）陈顺喜朱清仁（中科院中国科技大学结构分析开放实验室合肥２３００２６）关键词苯乙烯，丙烯酸 β 羟乙酯，共聚合，竞聚率丙烯酸 β?..     

氧化羰化法合成碳酸甲乙酯热力学及催化性能的研究

研究了在甲醇、乙醇温和溶液中,氧化羰化一步合成不对称碳酸甲乙酯(MEC)反应。通过热力学计算考察了反应的可行性及程度。计算结果表明,在298.2K下主反应平衡常数为2.39×1080,说明此反应的可行性和程度均很大。实验发现在氧化羰化合成碳酸甲乙酯的过程中,不仅存在氧化羰化过程,同时也存在酯交换过程;含氮席夫碱(Schiff)的种类,甲醇和乙醇相对用量,反应温度和压力对碳酸甲乙酯(MEC)的合成均有影响。当以氯化亚铜(CuCl) 1,10 菲罗啉(phen) N 甲基咪唑(NMI)为催化剂时,摩尔比n(CuCl)∶n(NMI)∶n(phen)=1∶1.25∶1.25,在393K,2.4MPa,VMeOH∶VEtOH=2∶8,CuCl浓度为0.20mol L的条件下,反应2h,甲醇的转化率为44.3%,乙醇的转化率为22.3%,MEC产率为10.4%。与单纯CuCl催化剂相比,甲醇和乙醇的转化率分别提高17倍和9倍,MEC产率提高74倍。对氧化羰化反应机理也进行了探讨。     

新型希土4-羟基-7-三氟甲基-3-喹啉基甲酸乙酯配合物的光物理性质

首次合成了五种新型希土(Eu³⁺, Tb³⁺, Gd³⁺, Sm³⁺, Dy³⁺)配合物。配体为带有喹啉环的4-羟基-7-三氟甲基-3-喹啉基甲酸乙酯。并用元素分析、红外光谱和热分析方法确定了配合物的组成。通过测定钆配合物的低温磷光光谱表明4-羟基-7-三氟甲基-3-喹啉基甲酸乙酯的三重态能级为22000 cm^-1。配合物的光物理性质表明配体的三重态能级适于希土Eu³⁺, Sm³⁺, Dy³⁺和Tb³⁺，特别是Tb³⁺的发光。     

聚环氧乙烷大单体与丙烯酸乙酯的共聚及其规整接枝共聚物的表征

本工作研完了末端为甲基丙烯酸酯型的聚环氧乙烷大单体与丙烯酸乙酯的溶液自由基共聚。结果表明,大单体接枝效率和共聚物分子量受单体总浓度、投料比、大单体分子量及引发剂等的影响,接枝效率最高可达90％以上,分子量可在5-15×10~4范围内变化。丙烯酸乙酯与大单体共聚的竞聚率为0.83。共聚物用萃取法精制后,用IR、~1H-NMR、裂解色谱、GPC和膜渗透压计等进行了表征。证实产物有预期的规整接枝共聚物结构。平均接枝数为2—11。     

乙二胺对铝(Ⅲ)-铝试剂-乙醇显色反应的增敏及其应用

在pH4.0～4.5的乙酸-乙酸钠缓冲溶液中,适量的乙二胺对铝(Ⅲ)-铝试剂-乙醇的显色反应有明显的增敏作用。显色体系的最大吸收波长为545nm,表观摩尔吸光系数为1.2×10~4L/(mol·cm),铝(Ⅲ)含量在0.5～40μg/(25mL)时服从比尔定律。该显色体系用于测定合成水样中的铝,回收率为96.7％～98.4％,RSD为0.38％～0.43％。