脂肪族水性聚氨酯的动态力学行为研究

合成了一系列脂肪族水性聚氨酯 .考察了软段的组成、软段分子量及DMPA用量对产物动态力学性能的影响作用 .实验结果表明 ,软段的化学结构对水性聚氨酯的相态结构影响很大 .聚醚型水性聚氨酯具有较低的软段玻璃化转变温度 (Tgs) .聚醚型产物的微相分离程度高于聚酯型产物 .当采用聚酯和聚醚二元醇为混合软段时 ,Tgs随软段中聚醚含量的提高而逐渐降低 .提高DMPA用量 ,软段玻璃化转变温度Tgs移向低温区 ,硬段玻璃化转变温度Tgh移向高温区 ,说明体系的微相分离程度加大 .当软段分子量较低时 ,产物为半相容结构 ,只有一个主转变峰 ,软段的玻璃化转变以肩峰的形式出现 ;当软段分子量较高时 ,产物的微相分离程度较高 ,可以分别观察到软段及硬段的玻璃化转变 .总之 ,通过改变软段的种类、组成和分子量以及DMPA用量 ,可以大幅度地改变水性聚氨酯的形态结构 .     

水性聚氨酯乳化过程中相转变的研究

本文合成了单官能团小分子物质封端的脂肪族水性聚氨酯预聚物 ,通过考察预聚物加水乳化过程中粘度及电导率的变化 ,研究了其相转变行为 .实验结果表明 ,随着软段分子量升高 ,体系的相转变点后延 ;聚酯体系的相转变比聚醚体系的相转变发生得早 ;[NCO]/ [OH]值越接近 1,体系的粘度就越高 ,相转变发生所需的水含量也越高 ;羧基含量及中和度也会对分散体系的相转变产生影响 .通过选择合适的条件 ,可以实现对乳化过程的优化     

扩链剂对脂肪族聚氨酯脲和聚脲弹性体结构与性能的影响

用异佛尔酮二胺(IPDA)、乙二胺(EDA)和己二胺(HDA)三种扩链剂合成了不同结构的脂肪族聚氨酯脲和聚脲, 并考察了扩链剂对聚氨酯脲和聚脲形态结构与性能的影响. 研究结果表明, 与EDA和HDA扩链的聚氨酯脲和聚脲相比, IPDA扩链的聚氨酯脲和聚脲中脲羰基的氢键化程度较低, 软段和硬段间的相混合程度较好; 同时它们具有更好的拉伸强度、硬度和撕裂强度, 但断裂伸长率较低. EDA和HDA扩链的聚氨酯脲和聚脲相比, 两者性能相差不大. 聚氨酯脲的脲羰基较完善氢键化程度以及整个氢键化程度都比聚脲的要低, 同时聚氨酯脲的吸水率也较低.     

脂肪族水性聚氨酯的力学性能研究

考察了软段的种类、分子量大小、混合软段的组成对产物力学性能的影响作用。同时还研究了二羟甲基丙酸(DMPA)用量以及中和剂的影响作用．实验结果表明。软段结构对脂肪族水性聚氨酯成膜的力学性能影响很大，聚酯型产物具有较高的模量和拉伸强度。聚醚型产物则具有较高的伸长率．混合软段对产物力学性能的影响较为复杂，随着软段中聚醚含量的升高，产物的硬度和模量均大幅度下降，但拉伸强度和伸长率的变化并不是一个线性关系．产物的模量随软段分子量的提高而降低，但伸长率和拉伸强度却有所提高．当DMPA用量较高时。产物的模量和拉伸强度均较高：当DMPA用量较低时，产物则具有较高的伸长率．中和剂的种类对产物力学性能的影响明显，当以NaOH为中和剂时，产物具有较高的硬度、模量、拉伸强度：以三乙胺为中和剂时，产物具有较高的伸长率．     

水性含氟聚氨酯的研究进展

水性含氟聚氨酯具有低的VOC排放,同时由于氟元素的引入,解决了传统水性聚氨酯耐水、耐油性差的缺点,大大拓展了其在涂料、皮革、油墨等领域的应用范围,因此受到广泛关注.本文综述了近年来国内外水性含氟聚氨酯的主要研究进展,综合比较了两种合成水性含氟聚氨酯主要方法,即核壳乳液聚合法和缩聚共聚法的各自特点,并对由两种不同方法制备的水性含氟聚氨的性能进行了讨论.     

单组分阴离子水性聚氨酯

综述了单组分阴离子水性聚氨酯的性能特点、制备方法和原理以及国内外近期研究进展。指出单组分水性聚氨酯的发展趋势为：单一型向复合型、多功能型发展;单组分改水性聚氨酯是近期研究的重点和热点。     

水性聚氨酯涂料改性研究进展

随着环保理念的日益增长,水性涂料将逐步取代溶剂型涂料.水性聚氨酯涂料由于其综合性能优越,是水性涂料中发展最快的品种之一,得到了广泛研究.为了进一步提高水性聚氨酯涂料的性能,通常要对聚氨酯树脂进行改性.对近些年常用的改性技术,如有机树脂改性、无机纳米材料改性和植物油改性的原理与方法进行了综述.这些改性技术可以提高水性聚氨酯的耐热性、耐水性、光泽度、物理机械性能、固含量等综合性能.     

PCDL型超支化水性聚氨酯的合成与性能

以甲苯-2,4-二异氰酸酯（TDI）、聚碳酸酯二醇（PCDL）、二羟甲基丙酸（DMPA）和二乙醇胺（DEOA）为原料,采用A₂＋bB₂共聚合路线合成了具有超支化结构的水性聚氨酯（HBAPU）乳液。采用红外光谱（FT-IR）、核磁共振（13C NMR）对产物结构进行了表征,证实了超支化聚氨酯的支化度随 n(NCO)/n(OH)比值的增大而增大。用PCS、TG、电子拉力机对产物的性能进行了测试,同时也对胶膜的耐水性进行了测试,发现在DMPA含量为0.4 mmol/g时,HBAPU的粒径仅有20.57 nm,而线性水性聚氨酯粒径有130.91 nm,并且HBAPU具有良好的耐水性、热稳定性和较高的拉伸强度。     

二氧化硅/聚氨酯纳米复合物对环氧树脂电泳膜性能的改进

二氧化硅/聚氨酯纳米复合物对环氧树脂电泳膜性能的改进;阳离子水性聚氨酯;     

单油酸三羟甲基丙烷酯改性水性聚氨酯

利用单油酸三羟甲基丙烷酯(TMPM)、异佛尔酮二异氰酸酯(IPDI)和聚氧化丙烯(PPG)等制备水性聚氨酯。采用透射电镜(TEM)、动态激光光散射(DLLS)、红外光谱(FT-IR)、热重分析(TGA)和表面张力仪表征了乳液胶束形态、产物结构及性能。结果表明:水性聚氨酯(PU)分子上引入脂肪侧链容易在水中形成规整的胶束,但TMPM改性的水性聚氨酯胶束粒径随TMPM含量的增加不断增大,当w(TMPM)=0.07时,乳液不稳定;脂肪侧链的引入降低了水性聚氨酯乳液的表面张力,表面张力随着反应体系中—NCO和—OH摩尔比的增大而降低,随交联度的增大先增加后减小;TMPM的引入可以提高胶膜的热稳定性。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.