Effect of alcohols on the gamma-radiation-induced polymerization of ethylene

Gamma-radiation-induced polymerization of ethylene in alcohols such as methyl, ethyl, n-propyl, isopropyl, n-butyl, isobutyl, sec-butyl, tert-butyl, and n-pentyl alcohols was carried out under a pressure of 400 kg./cm.²at 30°C. at a dose rate of 1.4 × 10⁵ rad/hr. in a batch reactor of 100 ml. capacity. The yield and molecular weight of polymer formed in the alcohols (except tert-butyl alcohol) were much lower than those of the bulk polymerization under the same conditions, whereas the addition of tert-butyl alcohol increased the yield and reduced the molecular weight. From the infrared spectra of the polymers and those of the bromination products it was concluded that only primary OH exists in the polymer formed in methyl alcohol and that both primary and secondary OH are in the polymer formed in other primary alcohols. Both secondary and tertiary OH were observed in the polymer when the secondary alcohols were used, and only tertiary OH in the case of tert-butyl alcohol. These polymers were found to contain small amounts of vinylidene unsaturation and methyl group. On the basis of these results the roles of the alcohols in the polymerization are discussed.     

In situ study of the interaction between <Emphasis Type="Italic">tert</Emphasis>-butyl chloride and aluminum activated with liquid In-Ga eutectic

The interaction between tert-butyl chloride and activated aluminum was studied by attenuated total reflectance Fourier transform infrared spectroscopy near room temperature (18–25°C). A long induction period of ∼240–260 min was observed. The ionic aluminum chloride complexes [Al _n Cl_3n+1]⁻ (n = 1, 2) and the molecular species AlCl₃ were identified at the activated aluminum/tert-butyl chloride interface during the reaction. The formation of the ion in the AlCl₄⁻ ion in the liquid medium and the presence of the same ion and a molecular AlCl₃-tert-butyl chloride complex in the resinous products of the reaction were confirmed by ²⁷Al NMR spectroscopy. The reaction products were analyzed qualitatively by GC/MS. The reactivities of activated aluminum and anhydrous aluminum chloride toward tert-butyl chloride under the same conditions were compared. A distinctive feature of the interaction activated aluminum and tert-butyl chloride is the dominant formation of the AlCl₄⁻ ion. By contrast, the interaction between aluminum chloride and tert-butyl chloride yields the polynuclear ion Al₂Cl₇⁻ and, likely, Al₃Cl₁₀⁻.     

Chemistry of O-Benzoquinones and Masked O-Benzoquinones IV. Synthesis of O-Spirodienonelactones from Unsymmetric Catechols

We describe the syntheses of 6, 8-di-tert-butyl-, 7, 9-di-tert-butyl., 6,7-di-n-propyl and 8, 9-di-n-propyl-O-spirodienonelactone from 3, 5-di-tert-butylcatechol and 3, 4-di-n-propylcatechol.     

A Facile Approach To 5-Trifluoromethylated 1,2,4-Triazole Derivatives

Ethyl (l,l,l-trifluoro-2-propylidene)carbazate is converted with tert-butyl hypochlorite to the 2-chloro-l,l,l-trifluoro-2-propyl azo compound 2, which reacts with antimony pentachloride to produce the trifluoromethylated 1-aza-2-azoniaallene salt 3 as a highly reactive intermediate. The cation 3 is employed as a CF₃-containing synthon for the preparation of the 5-trifluoromethylated 1H-1,2,4-triazoliumpicrates 6a-e.     

Enhanced Recognition of Spin Trapped Radicals In Complex Mixtures: Deuterated Nitronyl Adducts Provide A Gas Chromatographic/Mass Spectrometric Marker

Abstract

The use of deuterated analogues of α-phenyl-N-tert-butyl nitrone (PBN) are reported for GC/MS analysis of spin trapping products. PBN-d₉ and PBN-d₄₁, deuterated in the tert-butyl group (the latter also deuterated in the phenyl ring), result in a more diagnostic fragment ion, C₄D₉ ⁺ (m/z = 66) which improves the recognition of PBN adducts in mixtures. This feature has helped identify a new 1,3-radical addition product of PBN-d₉ formed during azobis(isobutyronitrile) thermolysis (addition of 2-cyano-2-propyloxyl followed by 2-cyano-2-propyl radicals). the ¹³C-trichloromethyl radical adduct of PBN-d₁₄ produced during ¹³C-carbon tetrachloride incubation with rat liver micrcsomes was identified by GC/MS in a complicated biological extract mixture.     

Thermodynamics of Solution of Some Alkyl Acetates in Water

 The temperature dependence of the solubility of methyl acetate (MeOAc), ethyl acetate (EtOAc), 1-propyl acetate (1-PrOAc), 1-butyl acetate (1-BuOAc), 2-methyl-1-propyl acetate (iso-BuOAc), 2-butyl acetate (sec-BuOAc), and 2-methyl-2-propyl acetate (tert-BuOAc) in water in the temperature range from 298.2 to 318.2 K was determined. The experimental solubility data together with some literature values are presented as a function of temperature and given in analytical form. The solubilities of the investigated compounds at 298.2 K were correlated with the number of carbon atoms in the solute molecule. The standard thermodynamic functions for solubility, i.e. Gibbs free energy, enthalpy, heat capacity, and entropy, were calculated. The Gibbs free energy is positive and increases linearly with the number of carbon atoms, whereas the enthalpy and entropy are negative. The standard thermodynamic functions were converted to thermodynamic quantities for hydration. The Gibbs free energies of hydration of alkyl acetates, which are negative, are compared with the Gibbs free energy of hydration of some n-alkanes, 1-alcohols, and 1-alkylamines. The standard thermodynamic functions of hydration were analyzed using a modified version of the theoretical approach developed by Lee and Graziano [1].     

Thermodynamics of Solution of Some Alkyl Acetates in Water

Summary.  The temperature dependence of the solubility of methyl acetate (MeOAc), ethyl acetate (EtOAc), 1-propyl acetate (1-PrOAc), 1-butyl acetate (1-BuOAc), 2-methyl-1-propyl acetate (iso-BuOAc), 2-butyl acetate (sec-BuOAc), and 2-methyl-2-propyl acetate (tert-BuOAc) in water in the temperature range from 298.2 to 318.2 K was determined. The experimental solubility data together with some literature values are presented as a function of temperature and given in analytical form. The solubilities of the investigated compounds at 298.2 K were correlated with the number of carbon atoms in the solute molecule. The standard thermodynamic functions for solubility, i.e. Gibbs free energy, enthalpy, heat capacity, and entropy, were calculated. The Gibbs free energy is positive and increases linearly with the number of carbon atoms, whereas the enthalpy and entropy are negative. The standard thermodynamic functions were converted to thermodynamic quantities for hydration. The Gibbs free energies of hydration of alkyl acetates, which are negative, are compared with the Gibbs free energy of hydration of some n-alkanes, 1-alcohols, and 1-alkylamines. The standard thermodynamic functions of hydration were analyzed using a modified version of the theoretical approach developed by Lee and Graziano [1]. Received October 16, 2000. Accepted May 14, 2001     

13C NMR chemical shifts of N-unsubstituted- and N-methyl-pyrazole derivatives

¹³C shielding data for 100 derivatives of pyrazole are reported. These include methyl, ethyl, n-propyl, tert-butyl, phenyl, hydroxymethyl, carboxyl, ethoxycarbonyl, cyano, amino, hydrazino, nitro, azido, chloro, bromo and iodo groups as substituents on the ring carbon atoms.     

Thermal degradation of poly(alkyl acrylates). II. Primary esters: Ethyl,n-propyl,n-butyl,and 2-ethylhexyl

Quantitative analyses of the products of thermal degradation of poly(ethyl acrylate), poly(n-propyl acrylate), poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) have been made, principally by the combined application of GLC and mass and infrared spectroscopy. Data are recorded in mass balance tables. The major gaseous products are carbon dioxide and the olefin corresponding to the ester group. The minor gaseous products include the corresponding alkane, the alkane/olefin ratio being of the order of 10^?2–10^?3, and traces of carbon monoxide and hydrogen. The alcohol corresponding to the alkyl group is the major liquid product but there are also traces of monomer and the corresponding methacrylate. Alcohol production exhibits autocatalytic properties. The chain fragment fractions of the products are colored yellow and have average chain lengths of 3.2, 3.3, 3.6, and 5.6 for the ethyl, n-propyl, n-butyl and 2-ethylhexyl esters, respectively. The infrared spectra are similar to those of the parent polymers but with well defined differences. Insolubility develops in the ethyl, n-propyl, and n-butyl esters, but the residual material from poly(2-ethylhexyl acrylate) remains soluble even at very advanced stages of degradation. All of these products and reaction characteristics are accounted for in terms of radical reactions with a unique initiation step.     

Reaktionen von Tetraphosphortrichalkogeniden mit Alkyliodiden

Reactions of Tetraphosphorus Trichalcogenides with Alkyl Iodides Reactions of alkyl iodides RI (R = CHI₂, CH₂I or tert-Butyl) with P₄E₃ (E = S or Se) under the influence of light resulted in cleavage of the basal P₃ ring. β-P₄E₃(I)R was formed initially, then it rearranged to the more stable α-P₄E₃(I)R structure. ³¹P NMR data of these products were measured and discussed, along with ⁷⁷Se data for α- and β-P₄⁷⁷SeSe₂(I)CHI₂. On reaction of P₄S₃ with tert-butyl iodide in CS₂ or with sec-butyl iodide or iso-propyl iodide in dioxane, the new type of compounds P₅S₂R was observed. In this a sulfur bridge of P₄S₃ is replaced by a P? R group. ³¹P-NMR data for these compounds are reported.     

Thermodynamics of Transfer of Some Alkyl Acetates from Water to Water–Ethanol Mixtures

 The solubility of methyl acetate (MeOAc), ethyl acetate (EtOAc), 1-propyl acetate(1-PrOAc), 1-butyl acetate (1-BuOAc), 2-methyl-1-propyl acetate (iso-BuOAc), 2-butyl acetate (sec-BuOAc), 2-methyl-2-propyl acetate (tert-BuOAc), 1-pentyl acetate (1-PeOAc), and 1-hexyl acetate(1-HeOAc) in 2.5, 5.0, 7.5, and 10.0 weight per cent of ethanol in water were determined at 298.2 K. The solubility of the same compounds, except for tert-BuOAc, 1-PeOAc, and 1-HeOAc, was determined as a function of temperature at 10.0 weight per cent of ethanol in water. From the solubility measurements the standard Gibbs energy (), enthalpy (), and entropy () of transfer were determined. The calculated thermodynamic functions show that the predominant factors in the transfer of alkyl acetate molecules are the transfer of the cavity and the hydrophobic interaction of the non-polar alkyl chain. Scaled particle theory calculations were used to determine the thermodynamics of cavity transfer, which were combined with the experimental total transfer quantities to obtain the corresponding interaction transfer quantities. It was found that the Gibbs energy of interaction for the transfer is negative, whereas the enthalpy and entropy of interaction for the transfer are positive; almost complete compensation of enthalpy and entropy components occurs.     

Synthesis and cytotoxic activity of derivatives of 6<Emphasis Type="Italic">Z</Emphasis>-acetylmethylenepenicillanic acid <Emphasis Type="Italic">tert</Emphasis>-butyl ester

The sulfoxide of 6Z-[2-(methoxyimino)propylidene]penicillanic acid tert-butyl ester and the sulfones of 6Z-[2-(hydroxyimino-, methoxyimino-, benzyloxyimino-, 2-bromo- and 4-bromobenzyloxyimino)-propylidene]penicillanic acid in the syn and anti forms have been synthesized by the condensation of the sulfoxide and sulfone of 6Z-acetylmethylenepenicillanic acid tert-butyl ester with hydroxylamine, methoxyamine, benzyloxyamine, 2-bromo- and 4-bromobenzyloxyamines. The syn and anti isomers of 3Z-(2-methoxyiminopropylidene)-4R-(benzothiazolyl-2-dithio)-2-oxoazetidinyl-1R-(2-propenyl)acetic acid tert-butyl ester were obtained by opening of the thiazolidine ring in 6Z-[2-(methoxy-imino)propylidene]-1-oxopenicillanic acid tert-butyl ester with 2-mercaptobenzothiazole. The 3Z-(2-methoxyiminopropylidene)-4R-(methylsulfonyl)-2-oxoazetidinyl-1-(2-propylidene)acetic acid tert-butyl ester was synthesized by the interaction of 1,8-diazobicyclo[5.4.0]undec-7-ene and methyl iodide with 6Z-[2-(methoxyimino)propylidene]-1,1-dioxopenicillanic acid tert-butyl ester. A dependence of the cytotoxic effect in relation to cancer and normal cells in vitro on the structure of the substituent in position 6 and the syn and anti isomerism of the oxyimino group was established for the synthesized compounds.     

Synthesis and polymerization of vinyl esters and vinyl ethers having bulky substituents

In order to clarify the effect of bulky substituents on the stereoregulation of vinyl monomers, vinyl-1-adamantanecarboxylate and vinyl 1-adamantyl ether were synthesized and polymerized by radical and cationic mechanisms, respectively. As open-chain models of the adamantyl group, vinyl trialkylacetate (alkyl = ethyl, n-propyl, and n-butyl) and vinyl tri-n-propylcarbinyl ether were also synthesized and polymerized. The adamantly group in the vinyl ester favored syndiotactic propagation in a manner similar to the trimethylcarbinyl group. Higher homologs of tri-n-alkylcarbinyl group showed higher syndiotacticity but this effect was saturated in higher members of the series. The effect of the adamantyl group in vinyl ether was similar to that of the tert-butyl group, leading to high isotacticity on cationic polymerizations in nonpolar solvents and to atactic polymers in polar solvents, but the tri-n-propylcarbinyl group was found unique in leading to what was assumed to be a heterotactic polymer. Polymers with the adamantyl group showed much higher softening points than polymers of the corresponding open-chain groups.     

Aqueous solution ofN-methylmorpholineN-oxide as a stationary liquid phase in steam chromatography

The retention of more than 70 voltatile organic compounds of different classes was studied by steam chromatography using aqueous solutions ofN-methylmorpholineN-oxide as the stationary liquid phase (SLP). The effects of temperature and composition of the mobile phase on the retention factors (k) for polar and nonpolar sorbates were elucidated. An unusual order of elution of aliphatic alcohols was noted, namely,tert-butyl alcohol <sec-butyl alcohol < isopentyl alcohol <isobutyl alcohol<isopropyl alcohol <n-pentyl alcohol <n-butyl alcohol <n-propyl alcohol <ethanol <methanol. The retention of cyclohexanol was longer than those of benzyl alcohol andn-hexyl alcohol. Nitrogen-containing compounds were selectively separated on the water-organic SLP studied. For example, the retention of aniline was much longer than those of its derivatives,N,N-dimethylaniline andN,N-diethylaniline, having higher boiling points. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1077–1084, June, 2000.     

Synthesis and tautomeric transformations of 2-(tert-butyl)-1,2,4-benzotriazine-3(2H)-thiones

Treatment of 2-(tert-butyl)-1,2,3,4-benzotetrazinium tetrafluoroborates with sodium thiocyanate afforded 2-(tert-butylazo)phenyl isothiocyanates 3, which exist in equilibrium with 2-(tert-butyl)-1,2,4-benzotriazine-3(2H)-thiones 3′. The equilibrium depends on the substituents R in the benzene ring: the percentage of the open isomer 3 is about 20% for R = H or Me; for R = Cl or Br, the equilibrium is completely shifted to cyclic isomer 3′. The equilibrium is slow on the time scale of the ¹H and ¹³C NMR experiments. For compounds 3a/3′a (R = H), the spectra at 24 °C show two sets of signals, while those at 0 °C contain only signals for isomer 3′a. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1192–1195, July, 2006.     

Reaction of methylmagnesium iodide with dibutylcyanamide and dibutylnitrosamine

The reaction of methylmagnesium iodide with di(n-butyl)cyanamide results in dibutylamine, dibutylisopropylamine, and acetonitrile, while the reaction with di(n-butyl)nitrosamine affords acetaldehyde dibutylhydrazone. Formaldehyde, acetone, and 2-butanone dibutylhydrazones, as well as acetaldehyde butyl(1-methylbutyl)hydrazone, 2-butanone butyl(1-methylbutyl)hydrazone, 1,1-dibutyl-2,2-dimethylhydrazine, and 1,1-dibutyl-2-ethyl-2-methylhydrazine were also identified in minor amounts. Di(n-butyl)nitramine reacts with methylmagnesium iodide to give di(n-butyl)nitrosamine.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2078–2081, December, 1993.     

Electron Impact Mass Spectra of Some Substituted C-Phenyl N-tert-Butyl Nitrones (PBN's)

Abstract

The electron impact mass spectra of fifteen 4-substituted PBN's and PBN itself have been obtained using the probe method. Strong molecular ion peaks were observed in most cases. Fragmentation follows two major pathways depending on the polarity of the substitutent: the tert-butyl bond breaks to produce either the tert-butyl cation or isobutylene. The latter route is analogous to the well known McLafferty rearrangement. Fragmentation to produce the tert-butyl radical is a minor route. Electron-donating polar substituents appear to enhance fragmentation to isobutylene.     

Role of chain transfer in heterogeneous polymerization of ethylene

The role of chain transfer was studied for the radiation-induced polymerization of ethylene in precipitating media, namely n-butyl alcohol, tert-butyl alcohol and their mixtures. The affinities of those solvents for polyethylene are similar, but the chain-transfer coefficient of n-butyl alcohol is larger than that of tert-butyl alcohol. The polymerizations were carried out in a reactor of 100 ml under a pressure of 300 kg/cm², at 60°C, dose rate of 3.07 × 10⁴–1.75 × 10⁵ rad/hr in the presence of 50 ml of solvents. The polymerization in tert-butyl alcohol shows the kinetic behavior characteristic of a heterogeneous polymerization, such as rate acceleration, high dose rate dependence of polymerization rate, and low dose rate dependence of polymer molecular weight, whereas the polymerization in n-butyl alcohol does not exhibit such behavior and gives polymer having a molecular weight much lower than that of polymer obtained in tert-butyl alcohol. The polymer formed in tert-butyl alcohol exhibits a bimodal molecular weight distribution measured by gel permeation chromatography. In mixed tert-butyl alcohol and n-butyl alcohol solvent, with increasing fraction of n-butyl alcohol, the two peaks not only shift to lower molecular weight but the higher molecular weight peak becomes relatively small. Eventually, the polymer formed in n-butyl alcohol exhibits a unimodal distribution. Those results are well explained on the basis of the proposed scheme for heterogeneous polymerization.     

Thermodynamics of Transfer of Some Alkyl Acetates from Water to Water–Ethanol Mixtures

Summary.  The solubility of methyl acetate (MeOAc), ethyl acetate (EtOAc), 1-propyl acetate(1-PrOAc), 1-butyl acetate (1-BuOAc), 2-methyl-1-propyl acetate (iso-BuOAc), 2-butyl acetate (sec-BuOAc), 2-methyl-2-propyl acetate (tert-BuOAc), 1-pentyl acetate (1-PeOAc), and 1-hexyl acetate(1-HeOAc) in 2.5, 5.0, 7.5, and 10.0 weight per cent of ethanol in water were determined at 298.2 K. The solubility of the same compounds, except for tert-BuOAc, 1-PeOAc, and 1-HeOAc, was determined as a function of temperature at 10.0 weight per cent of ethanol in water. From the solubility measurements the standard Gibbs energy (), enthalpy (), and entropy () of transfer were determined. The calculated thermodynamic functions show that the predominant factors in the transfer of alkyl acetate molecules are the transfer of the cavity and the hydrophobic interaction of the non-polar alkyl chain. Scaled particle theory calculations were used to determine the thermodynamics of cavity transfer, which were combined with the experimental total transfer quantities to obtain the corresponding interaction transfer quantities. It was found that the Gibbs energy of interaction for the transfer is negative, whereas the enthalpy and entropy of interaction for the transfer are positive; almost complete compensation of enthalpy and entropy components occurs. Received September 27, 2001. Accepted (revised) December 20, 2001     

1,3-Bis[tert-butyl(di-tert-butylfluorsilyl)amino]trisulfan – eine Verbindung mit FSiNSSSNSiF-Helix

1,3-Bis[tert-butyl(di-tert-butylfluorosilyl)amino]trisulfane – a Compound with FSiNSSSNSiF Helix The lithium derivative of tert-butyl(di-tert-butylfluorosilyl)-amine ( 1 ) reacts with sulfur or selenium to give the bis[(fluorosilyl)-amino]di- and -trisulfanes 2, 3 and -selane 4 , respectively. The trisulfane 3 crystallizes from n-hexane and exhibits a helical structure (X-ray analysis).