Infrared study of out-of-plane deformation vibrations of linear and cyclized 1,2- and 3,4-polyisoprenes

This study concerns the influence of 3,4 and 1,2 addition in cyclic polyisoprenes on the extinction coefficients of the absorption bands at 890 and 910 cm^?1 due to out-of-plane vibrations of ?CH₂ of the isopropenyl and vinyl groups (correspoding, respectively, to 3,4 or 1,2 addition). In contrast to analogous bands characteristic of 1,4 addition (especially in the case of cis-1,4 units of polybutadiene), the shape, position, and intensity of these bands are not influenced by changes in the structure of the macromolecular chain. The extinction coefficients of both bands did not change substantially, although the overall presence of both linear and cyclic forms varied over a wide range. It can be assumed, therefore, that the influence of configurational changes upon the intensity of the absorption bands of out-of-plane vibrations for double bonds is not a general phenomenon.     

Influence of polar modifiers on microstructure of polybutadiene obtained by anionic polymerization. Part 4: Acid-base polar modifiers forming σ-μ complexes: Amine-alkoxide,amine-ether-alkoxide,and ether-alkoxide

The influence of acid-base polar modifiers (σ-μ complex): amine-alkoxide, amine-ether-alkoxide, and ether-alkoxide complexes on microstructure of polybutadiene obtained by anionic polymerization was studied. The content of butadiene isomeric structures was determined based on FT-IR-ATR, ¹H, and ¹³C NMR data analyses. The results obtained indicated a very similar influence of all types of polar modifiers forming σ-μ complex on polymer microstructure leading to high vinyl polybutadiene with nearly equal ratios of cis-1,4 and trans-1,4 butadiene isomeric structures.     

Carbon-13 NMR of polybutadiene

By using the carbon-13 NMR technique, it is shown that there are no cis-1,4–trans-1,4 linkages in a n-BuLi-catalyzed polybutadiene. The polymer consists of “blocks” of cis-1,4 units and trans-1,4 units separated by isolated vinyl units. Preliminary evidence suggests this might also be true for other types of 1,3-diene polymerization. Some of the implications of this finding on the mechanism of polymerization are discussed. Tacticity triad distributions are readily determined in polybutadienes with high 1,2 addition contents.     

Glass-transition temperature and microstructure of polybutadienes

DSC and NMR are employed to determine the glass-transition temperatures and the structural features of polybutadienes with widely varying configuration isomeric compositions. The dependences of the glass-transition temperature on the contents of cis-1,4-, trans-1,4, and 1,2-units in polybutadiene chains are plotted and discussed. An analysis of the experimental results and the published data suggests that, in the study of the glass-transition-structure relationship, simplified approaches are inapplicable and it is necessary to consider the configurational and conformational geometry of polybutadiene chains.     

Microstructure of polyisoprene produced by cationic polymerization: NMR spectroscopic study

High-resolution ¹H and ¹³C NMR spectroscopy, including two-dimensional heteronuclear experiments, has been used to study the microstructure of polyisoprene produced by cationic polymerization. It is shown that macromolecules resulting from both regular and inverse additions are predominantly composed of trans-1,4-units, while 1,2- and 3,4-units are present in small amounts. NMR spectra demonstrate the absence of cis-1,4-units in the polymer, whereas broad signals (pedestals) are related to the presence of saturated structures. It is proposed to determine the content of trans-1,4-, 1,2-, and 3,4-units in cationic polyisoprene via the combined measurements of intensities of signals in the olefinic regions of ¹H and ¹³C NMR spectra.     

Determination of the geometric structure of three substituted polyacetylenes: Polymethylacetylene,polypentylacetylene, and poly(tbutylacetylene)

The geometric structure of polymethylacetylene (PMA), polypentylacetylene (PPA), and poly(t-butylacetylene) (PTA) was investigated by ¹H NMR, ¹³C NMR, and IR spectroscopies. It was shown that both NMR techniques can be used to determine the trans isomer content of PPA and PTA, whereas the ¹H NMR and IR methods can be used for PMA. A calibration curve was constructed by using the 965- and 720-cm^?1 bands of the IR spectrum of PPA, and could be used in future work for the same purpose if the samples had molecular weights similar to that of the one used in this study. The isomerization kinetics of PTA was investigated and cis^→ trans activation energies of 88 and 121 kJ/mol were calculated in solution and in the solid state, respectively. Heat treatment of the PMA and PPA samples always leads to a cis^→ trans isomerization with a 100% trans content under extreme conditions. Moreover, a cis^→ trans isomerization of PTA was induced in CCl₄, CDCl₃, toluene, and benzene, but a trans^→ cis isomerization was induced in decalin. The reversible isomerization of PTA covered a trans isomer concentration ranging form 25 to 60%.     

Preparation and Properties of trans-[CoCl2(tmd>)2]Cl,and trans- and cis-[Co(NCS)2(tmd)2]NO3 (tmd: Tetramethylenediamine)

The cobalt(III) complexes [CoX₂(tmd)₂]⁺ (X: Cl^? or NCS^?, tmd: tetramethylenediamine), in which tmd forms a seven-membered chelate ring, have been prepared. Trans-[CoCl₂(tmd)₂]Cl was derived from [Co(NO₂)₂(tmd)₂]NO₃ in a fairly good yield. Two geometrical isomers, trans and cis, of [Co(NCS)₂-(tmd)₂]NO₃ were independently synthesized from trans-[CoCl₂(tmd)₂]Cl by different methods. The geometrical configurations of the isomeric pair of the NCS complex have been determined based on chromatographic behavior, electronic absorption spectra, and vibrational spectra. The d-d and CT absorption maxima of the NCS complex (18.7 x 10³cm^?1 (ε = 275) and 30.9 x 10³cm^?1 (ε = 3630) for the trans isomer, 19.3 x 10³cm^?1 (ε = 302) and 31.0 x 10³cm^?1 (ε = 4070) for the cis isomer) and the Co-N(amine) stretching frequency of trans-[CoCl₂(tmd)₂]Cl (418 cm^?1) have been compared with those of the corresponding ethylenediamine and trimethylenediamine complexes.     

NMR and DSC investigations of the miscibility of blends of cis-1,4-polyisoprene with polybutadienes of different microstructures

Differential scanning calorimetry and torsional braid analysis investigations of the phase diagram of cis-1,4-polyisoprene/polybutadiene blends as a function of the polybutadiene microstructure were reported by several authors. Polybutadienes containing a high vinyl content were shown to be miscible with cis-1,4-polyisoprene on the DSC spatial scale, whereas polybutadienes containing a low vinyl content were immiscible. In this article, we used variable-temperature determinations of ¹H NMR free induction decays and low-temperature, high-resolution solid-state ¹³C NMR measurements of proton spin-lattice relaxation times in the rotating frame to probe the phase behavior of the cis-1,4-polyisoprene/polybutadiene blends at the smaller spatial scale of the NMR technique. Blends of cis-1,4-polyisoprene with a polybutadiene having a large number of vinyl 1,2 linkages appeared to be miscible on the molecular scale, in spite of small regions in which the polybutadiene component is not uniformily dispersed in the other polymer. On the contrary, blends in which the polybutadiene has a low content of vinyl 1,2 sequences were phase separated over the whole temperature range considered and no intermixed regions could be detected. The limiting case was observed with the polybutadiene containing 33 wt % vinyl 1,2 units, for which miscibility on a molecular scale is highly dependent on the blend composition. © 1995 John Wiley & Sons, Inc.     

1H-NMR study of polyisoprenes

¹H-NMR spectra of polyisoprene were assigned using polymers of isoprene-1,1,4,4-d₄, isoprene-1,1,5,5,5-d₅, and isoprene-4,4-d₂ polymerized with various catalysts. The methylene-proton signal at 2.1 ppm in cis-1,4 - and trans-1,4-polyisoprenes was divided into H₄- and H₁-proton signals; H₄ resonated at 2.21 ppm in both cis-1,4 and trans-1,4 units whereas H₁ resonated at 2.05, 2.21, and 2.15 ppm. Splitting due to the dyad sequences of 1,4 and 3,4 units was apparent. The methine-proton (H₃) in a 3,4 unit showed a broad peak centered around 1.5 ppm in C₆D₆. The overlapping of this signal with the methyl-proton signals at 1.73 and 1.63 ppm resulted in some uncertainty in the determination of the microstructure of polyisoprene which contained a considerable amount of 3,4 unit.     

Reactivities of sulfur-centered radical toward polyisoprenes and polybutadienes studied by flash photolysis method

The kinetic behavior of the thiyl radical in the solution containing polyisoprenes and polybutadienes has been studied by the flash photolysis method. For benzothiazole-2-thiyl radical, the addition rate constants toward these polymers and the model compounds of the polymers were evaluated. The relative reverse rate constants and equilibrium constants were also estimated. The addition rate constants decrease with an increase in the degree of polymerization; the ratio of the addition rate constant for polyisoprene (3.1 × 10⁴ M^?1 s^?1 (in monomer unit); M_v = 674,000) to that for 2-methyl-2-butene (1.5 × 10⁵ M^?1 s^?1) is about 1/5. This indicates that the polymer chain effect appears in the free-radical addition reaction. The relative reverse rate constants for the polymers are also smaller than those for 2-methyl-2-butene, suggesting a kind of polymer effects; i.e., it can be presumed that the bonded-thiyl radicals migrate very rapidly to the neighboring double bonds in the polymer. Significant differences in the rate parameters were observed between polyisoprene and polybutadiene, between cis- and trans-polyisoprenes, and between 1,4- and 1,2-polybutadienes.     

Kinetics of the reactions of O3 and OH radicals with a series of dialkenes and trialkenes at 294 ± 2 K

Rate constants for the gas phase reactions of O₃ and OH radicals with 1,3-cycloheptadiene, 1,3,5-cycloheptatriene, and cis- and trans-1,3,5-hexatriene and also of O₃ with cis-2,trans-4-hexadiene and trans -2,trans -4-hexadiene have been determined at 294 ± 2 K. The rate constants determined for reaction with O₃ were (in cm³ molecule^-1s^?1 units): 1,3-cycloheptadiene, (1.56 ± 0.21) × 10^-16; 1,3,5-cycloheptatriene, (5.39 ± 0.78) × 10^?17; 1,3,5-hexatriene, (2.62 ± 0.34) × 10^?17; cis?2,trans-4-hexadiene, (3.14 ± 0.34) × 10^?16; and trans ?2, trans -4-hexadiene, (3.74 ± 0.61) × 10^?16; with the cis- and trans-1,3,5-hexatriene isomers reacting with essentially identical rate constants. The rate constants determined for reaction with OH radicals were (in cm³ molecule^?1 s^?1 units): 1,3-cycloheptadiene, (1.31 ± 0.04) × 10^?10; 1,3,5-cycloheptatriene, (9.12 × 0.23) × 10^?11; cis-1,3,5-hexatriene, (1.04 ± 0.07) × 10^?10; and trans 1,3,5-hexatriene, (1.04 ± 0.17) × 10^?10. These data, which are the first reported values for these di- and tri-alkenes, are discussed in the context of previously determined O₃ and OH radical rate constants for alkenes and cycloalkenes.     

A new insight into the mechanism of 1,3‐dienes cationic polymerization. II. Structure of poly(1,3‐pentadiene) synthesized with tBuCl/TiCl4 initiating system

The microstructure of poly(1,3‐pentadiene) synthesized by cationic polymerization of 1,3‐pentadiene with ^tBuCl/TiCl₄ initiating system is analyzed using one‐dimensional‐ and two‐dimensional‐NMR spectroscopy. It is shown that unsaturated part of chain contains only homo and mixed dyads with trans?1,4‐, trans?1,2‐, and cis?1,2‐structures with regular and inverse (head‐to‐head or tail‐to‐tail) enchainment, whereas cis?1,4‐ and 3,4‐units are totally absent. The new quantitative method for the calculation of content of different structural units in poly(1,3‐pentadiene)s based on the comparison of methyl region of ¹³C NMR spectra of original and hydrogenated polymer is proposed. The signals of tert‐butyl head and chloromethyl end groups are identified in a structure of poly(1,3‐pentadiene) chain and the new approaches for the quantitative calculation of number‐average functionality at the α‐ and ω‐end are proposed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3297–3307     

Vapor-liquid equilibria for polybutadiene and polyisoprene solutions

Vapor-liquid equilibria in binary solutions of hydrocarbons (n-hexane, benzene, toluene, cyclohexane) and chlorinated methanes [carbon tetrachloride (CCl₄), chloroform (CHCl₃), and dichloromethane (CH₂Cl₂)] in polybutadiene (PBD) and polyisoprene have been determined at 23.5°C by using the piezoelectric sorption method. The weight-fraction activity coefficient of solvent (a₁/w₁) in cis-PBD (98% cis-1,4 addition) and random cis-trans-PBD (r-PBD, 34.3% cis-1,4 addition; 54.3% trans-1,4 addition; 11.4% vinyl-1,2 addition) are almost equal for CCI₄, CHCI₃, CH₂CI₂, benzene, and toluene solutions, while the values of a₁/w₁ in n-hexane and cyclohexane solutions in cis-PBD are larger than those in r-PBD solutions. The values of a₁/w₁ for solutions of hydrocarbons and chlorinated methanes in cis-1,4 polyisoprene (95% cis-1,4 addition) have been compared with those for cis-PBD.     

1,2 Enriched polymerization of isoprene by cobalt complex carrying aminophosphory fused (PN3) ligand

Metal-catalyzed selective isoprene polymerization has been a major entry toward cis-1,4, trans-1,4, and 3,4 isomers of polyisoprene, however, 1,2 selective polymerization of isoprene has not yet been achieved due to the steric problem. In this work, difluoro cobalt complexes carrying aminophosphory (-HN-P(=O) ^tBu₂-) fused pyrazol-pyridine ligand has been prepared and characterized. In combination with Mg^n-Bu₂, the formed catalyst unprecedentedly converts isoprene to polyisoprene with 1,2 enchainment up to 50 mol% in a molecular weight controlled polymerization mode. The resultant polymers are fully characterized by NMR, IR, DSC, and GPC. The 1,2 incorporation of polyisoprene is weakly dependent on feeding of Mg^n-Bu₂ and reaction temperature. The weak affinity between Mg²⁺ and allylic terminal of propagating chain is possible for the unique 1,2 irregular insertion and non-irreversible chain transfer and termination reactions throughout the chain propagation. The ability of current catalyst demonstrates a big advantage for application in the development of 1,2 selective polymerization of isoprene, and a potential for access to a new family of polyisoprene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2286–2293     

Structure of polypiperylene chain segments according to high-resolution 13C NMR spectra

The microstructure of stereoregular 1,4-trans-and 1,4-cis-polypiperylenes, as well as polymers prepared from the trans-and cis-piperylene isomers via cationic polymerization in the presence of TiCl₄, was studied by high-resolution ¹³C NMR spectroscopy. Polypiperylene synthesized through the cationic polymerization of the cis isomer had a more diversified morphology of the macromolecular chain, i.e., had higher relative amounts of 1,2-cis-units and combinations of irregular-addition 1,4-trans-units. It was shown that ¹³C NMR spectra give the most comprehensive and independent information on the details of structure of the piperylene macromolecular chain.     

Photoinduced microstructural changes in 1,4-polyisoprene

An infrared and NMR study was made of the microstructural changes produced in thin films of purified cis- and trans-1,4-polyisoprene when irradiated with ultraviolet light in vacuo at room temperature. The major photochemical processes observed were cis–trans isomerization and loss of 1,4 double bonds, the latter process being accompanied by the formation of vinylidene and vinyl double bonds as well as some endlinking. Very surprisingly, the loss of original double bonds contributed also to a novel photocyclization which gave rise to cyclopropyl groups in the polyisoprene chain. The isomerization and the formation of cycloprophyl groups are presumed to proceed through triplet and biradical states of the 1,4 double bonds, while the vinylidene and vinyl double bonds must result from chain repture at the carbon–carbon bond joining successive isoprene units. Hydrogen abstraction and double-bond migration are of neglible importance in the overall photochemistry of polyisoprene.     

Conformation et spectrométrie de R.M.N.: II

The four isomeric 3-dimethylamino-trans-2-decalols-1,1,4,4-d₄ have been synthesised. Examination of PMR spectra of these compounds allows us to confirm the ‘flattened-chair’ conformation for the cis N(CH₃)₂^a OH^e isomer, whereas the remaining three conserve the double chair conformation. The same type of flattening is also observed in the case of the diaxial quaternary ammonium salt and is even more marked in the cis N(CH₃)₃^a OH^e isomer resulting in a ‘twist-chair’ conformation.     

Identification of cis/trans isomers of methyl ester and oxazoline derivatives of unsaturated fatty acids using GC–FTIR–MS

Identification of cis/trans isomers of unsaturated fatty acids cannot usually be achieved by GC-MS (gas chromatography-mass spectrometry) without reference substances. In this study a GC-FTIR-MS system (gas chromatography-Fourier transform-mass spectrometry) was used to identify fatty acid methyl esters (FAMEs) and differentiate between the cis/trans isomers. Besides methyl esters, 2-alkenyl-4,4-dimethyloxazoline derivatives (DMOX), which have been used to locate double bond positions of unsaturated fatty acids, were examined with respect to their suitability for cis/trans differentiation. A combined GC-FTIR-MS system with a wide band (4000–550 cm^?1) mercury cadmium telluride (MCT) detector was used in series and parallel to identify 31 reference unsaturated fatty acids, including 7 pairs of cis/trans isomers. Serum samples of healthy persons and commercially available fish oil were analyzed as examples of complex mixtures. Using splitless injection the detection limit for the less sensitive IR detector was 25 ng/μl in case of the weak cis and trans bands. In the FTIR spectra cis/trans isomers were identified by analysis of bands arising from C? H out-of-plane (oop) bending: for both the FAME and DMOX derivatives cis-1,2-disubstituted double bonds give a strong band near 720 cm^?1 and the corresponding trans isomers near 967 cm^?1. cis Isomers could be identified further by a band at 3012 cm^?1. With the combined data of the GC-FTIR-MS system it is now possible to identify polyunsaturated fatty acids with regard to the discrimination of cis/trans isomers.     

Comprehensive structural characterization of polyisoprene synthesized via cationic mechanism

The microstructure of polyisoprene synthesized with ^tBuCl/TiCl₄ initiating system is investigated using 1D and 2D (HSQC and HMBC) NMR spectroscopy. It is found that trans‐1,4‐units with regular (head‐to‐tail) and inverse (tail‐to‐tail) and (head‐to‐head) enchainments are predominant structures of unsaturated part of polymer chain, while 1,2‐ and 3,4‐units are presented in minor amounts. The new methodology for the quantitative calculation of the content of different structural units in polyisoprene chain including both types of inverse trans‐1,4‐addition (tail‐to‐tail and head‐to‐head) is proposed. It is shown that head groups consist of tert‐butyl group connected to trans‐1,4‐unit of polyisoprene chain. In addition, two types of chlorine‐containing end groups are found (trans‐4,1‐Cl and 4,3‐Cl), while conjugated double bonds at the chain end are totally absent. The methodology for the calculation of number‐average functionality by tert‐butyl head and chlorine end groups, respectively, is developed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2430–2442     

Conformational equilibria in isomeric methylcyclohexanols studied by 13C NMR spectroscopy

The conformational equilibrium constants for isomeric methylcyclohexanols (cis- and trans-1,2-, 1,3- and 1,4-methylcyclohexanols) have been determined from peak area measurements in the completely proton decoupled low temperature ¹³C NMR spectra of the individual conformers. The ¹³C chemical shifts are discussed in terms of the additive model.