Mechanochemical synthesis of nanocrystalline nickel-molybdenum compounds and their morphology and application in catalysis: II. Effect of mechanochemical activation parameters—process power density and exposure time—on the composition and structure of nickel-molybdenum compounds

The effect of mechanochemical activation parameters-process power density and the time of treatment of a mixture of nickel hydroxocarbonate NiCO₃ · 2Ni(OH)₂ · nH₂O and ammonium paramolybdate (NH₄)₆Mo₇O₂₄ · 4H₂O -on the phase composition, specific surface area, and morphology of mechanically activated products at different Ni: Mo atomic ratios was studied. It was found that, at a mechanochemical activation process power density of 6.2 W/g, layered transition metal molybdates (LTM compounds) with different amounts of crystal water were the constituents of the products, whereas the products mechanically activated at a power density of 28.0 W/g contained a mixture of LTM compounds and heteropoly compounds with the Anderson structure regardless of activation time.     

Catalytic conversion of raw <Emphasis Type="Italic">Dioscorea composita</Emphasis> biomass to 5-hydroxymethylfurfural using a combination of metal chlorides in <Emphasis Type="Italic">N,N</Emphasis>-dimethylacetamide solvent containing lithium chloride

We synthesized 5-hydroxymethylfurfural (HMF) from carbohydrates using metal chloride catalysts. A 33.2 % yield of HMF was obtained from raw Dioscorea composita biomass with high starch by using a catalyst system composed of CrCl₃·6H₂O and LaCl₃·6H₂O at 120 °C for 4 h in N,N-dimethylacetamide containing lithium chloride. The catalyst system is also cost-effective for the conversion of soluble starch into HMF. In addition, levulinic acid was not formed in the reactions.     

Indium-containing catalysts for oxidative dehydrogenation of organic compounds

For the first time, a method was developed for introducing indium into Mg-Al hydrotalcites—precursors of oxide catalysts for oxidative dehydrogenation of alkanes. Samples of oxide catalysts were synthesized that contained indium oxide and also oxides of magnesium, aluminum, chromium, vanadium, molybdenum, and niobium in various combinations. The catalytic properties of the produced catalysts were studied in the oxidative dehydrogenation of ethane, propane, and isobutane. It was established that the introduction of indium into catalysts increases the selectivity and the yields of desired products. New hydroxo salts with a layered structure of the hydrotalcite type were synthesized: [Al_{1 ? n} In _n Mg _m (OH)_{3 + 2m ? 1}][(NO₃) · nH₂O] and quaternary magnesium indium chromium aluminum hydroxonitrate of the composition [Al_0.5In_0.5Cr_0.5Mg_2.5(OH)_8.5][(NO₃) · nH₂O]; these salts were found to be isostructural. The obtained compounds were studied as catalyst precursors.     

Mechanochemical synthesis of nanocrystalline nickel-molybdenum compounds,their morphology and application in catalysis: I. Effect of the Ni: Mo atomic ratio on the structure and properties of nickel-molybdenum compounds prepared under mechanochemical synthesis conditions

Mechanochemical activation in high-energy planetary activators was used for the preparation of highly dispersed nickel-molybdenum compounds. Nickel hydroxocarbonate [NiCO₃ · 2Ni(OH)₂ · nH₂O] and ammonium paramolybdate [(NH₄)₆Mo₇O₂₄ · 4H₂O] were chosen as starting compounds. The effect of the Ni: Mo atomic ratio on the composition and structure of products formed in the process of mechanochemical activation followed by calcination was studied. It was found that, at the Ni: Mo atomic ratios of 1.0 and 1.4, the mechanically activated product after calcination at 520°C contained 70–100% β-NiMoO₄, which is a stable phase at temperatures lower than 180°C.     

Effect of the Composition and Morphology of the Active Phase of NiMoW/P-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts with Different Mo/W Ratios on Their Activity in the Reactions of Dibenzothiophene Hydrogenolysis and Naphthalene Hydrogenation

A series of catalysts have been synthesized Ni–Mo–W/P-Al₂O₃ with different Mo: W ratios (a sample without W, Mo: W = 2: 1, Mo: W = 1: 1, Mo: W = 1: 2, and a sample without Мо) and a concentration of P₂O₅ in a support of 0.5 wt %. Heteropoly acids H₃PMo₁₂O₄₀ · nH₂O and H₃PW₁₂O₄₀ · nH₂O and nickel citrate were precursors of the active phase. High-resolution transmission electron microscopy and X-ray photoelectron spectroscopy were used to study the surface of the sulfide phase of the samples. Their catalytic activity was estimated in the reactions of dibenzothiophene hydrodesulfurization and naphthalene hydrogenation. A catalyst with the ratio Mo: W = 1: 1 showed the highest activity, and was characterized by the maximum concentration of atomic groups Ni–Mo–W–S, Mo–S, and W–S.     

Preparation of LiZnPO4·H2O via a novel modified method and its non-isothermal kinetics and thermodynamics of thermal decomposition

The single phase ??-LiZnPO₄·H₂O was directly synthesized via solid-state reaction at room temperature using LiH₂PO₄·H₂O, ZnSO₄·7H₂O, and Na₂CO₃ as raw materials. XRD analysis showed that ??-LiZnPO₄·H₂O was a compound with orthorhombic structure. The thermal process of ??-LiZnPO₄·H₂O experienced two steps, which involved the dehydration of one crystal water molecule at first, and then the crystallization of LiZnPO₄. The DTA curve had the one endothermic peak and one exothermic peak, respectively, corresponding to dehydration of ??-LiZnPO₄·H₂O and crystallization of LiZnPO₄. Based on the iterative iso-conversional procedure, the average values of the activation energies associated with the thermal dehydration of ??-LiZnPO₄·H₂O, was determined to be 86.59?kJ?mol^?1. Dehydration of the crystal water molecule of ??-LiZnPO₄·H₂O is single-step reaction mechanism. A method of multiple rate iso-temperature was used to define the most probable mechanism g(??) of the dehydration step. The dehydration step is contracting cylinder model (g(??)?=?1?(1???)^1/2) and is controlled by phase boundary reaction mechanism. The pre-exponential factor A was obtained on the basis of E _a and g(??). Besides, the thermodynamic parameters (??S ^??, ??H ^??, and ??G ^??) of the dehydration reaction of ??-LiZnPO₄·H₂O were determined.     

Crystal structure and thermal behavior of a chromium-piperazinium phosphate

(C₄N₂H₁₂)CrO(H_1.5PO₄)₂·H₂O has been synthesized hydrothermally using piperazine as organic template. Its crystal structure was solved ab initio using synchrotron powder X-ray diffraction data [monoclinic, a = 16.9649(4) Å, b = 9.8609(2) Å, c = 7.14375(14) Å, and β = 94.896(3)°, space group P2₁/a, Z = 4]. 1D structure is composed by isolated infinite anionic chains [CrO(H_1.5PO₄)₂]_n (vertex-sharing {CrO₆} octahedra joined by phosphate moieties). Their 2D plate-like morphology is propitiated by a very strong inter-chain interaction (P–O···H···O–P symmetric hydrogen bonds). KAS isoconversional method was applied to determine the activation energy for both thermal and thermo-oxidative decomposition of (C₄N₂H₁₂)CrO(H_1.5PO₄)₂·H₂O.     

Gallium-containing catalysts for oxidative dehydrogenation of organic compounds

A method was developed for introducing gallium into Mg-Al hydrotalcites—precursors of oxide catalysts for oxidative dehydrogenation of alkanes. Samples of oxide catalysts were synthesized that contained gallium oxide and also oxides of magnesium, aluminum, chromium, vanadium, molybdenum, and niobium in various combinations. The catalytic properties of the produced catalysts were studied in the oxidative dehydrogenation of ethane, propane, isobutane, and hexane. It was established that the addition of gallium to catalysts increases the ethylene and propylene yields in the oxidative dehydrogenation of ethane and propane. New hydroxo salts with a layered structure of the hydrotalcite type were synthesized: ternary magnesium gallium aluminum hydroxonitrate of variable composition [Al_{1 ? n} Ga _n Mg _m (OH)_{3 + 2m ? 1}][NO₃ · nH₂O] and quaternary magnesium gallium chromium aluminum hydroxonitrate of the composition [AlGaCrMg_1.8(OH)_11.6][NO₃ · nH₂O]; these salts were found to be isostructural.     

Facile synthesis of WOx/ZrO2 catalysts using WO3·H2O precipitate as synthetic precursor of active tungsten species

Zirconia-supported tungsten oxide (WO_x/ZrO₂) catalysts were successfully synthesized using a suspension containing amorphous hydrous zirconia precipitates [ZrO_x(OH)_4-2x·yH₂O]_n and tungstate monohydrate (WO₃·H₂O) precipitates. The procedure involved the dissolution of the WO₃·H₂O precipitate during the aging process with the release of oxyanion [WO₄]^2- species, interaction of this species with the surface of the [ZrO_x(OH)_4-2x·yH₂O]_n precipitate and, formation of active WO_x species after thermal treatment. Non-bridging hydroxyl (OH^?) groups present in the [ZrO_x(OH)_4-2x·yH₂O]_n precipitate act as an active agent for the WO₃·H₂O dissolution. N₂ physisorption, X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), temperature-programmed reduction using hydrogen (H₂-TPR), temperature-programmed desorption of ammonia (NH₃-TPD), Fourier-transform infrared (FTIR) spectroscopy of adsorbed pyridine, and Raman spectroscopy were used to elucidate the catalyst structure–performance relationship. The catalytic activity was evaluated for the oxidative desulfurization (ODS) of a model fuel containing dibenzothiophene (DBT). For a fixed WO₃·H₂O content, longer aging times improved the catalyst activity, reaching a maximum when WO₃·H₂O was completely dissolved. The increase in surface area and formation of more active Zr-WO_x clusters and polytungstates are observed for the highest active catalysts. A synergetic effect between local Lewis and Brønsted acid sites seems to have contributed to the observed superior activity. The proposed strategy provides an efficient approach to produce active WO_x/ZrO₂ catalysts and may be applicable for designing other heterogeneous catalytic systems.     

Hydrothermal syntheses,crystal structures and properties of two cobalt(II) complexes constructed from 5-(isonicotinamido)isophthalic acid

Two Co(II) complexes, [Co(INAIP)(dib)]·4H₂O and [Co(INAIP)(phen)(H₂O)]·H₂O have been synthesized by the reaction of 5-(isonicotinamido)isophthalic acid (H₂INAIP) and CoSO₄·7H₂O, as well as N-donor ligands, namely 1,4-di(1-imidazolyl)benzene (dib) and 1,10-phenanthroline (phen) under hydrothermal conditions. Single-crystal X-ray diffraction analysis indicates that [Co(INAIP)(dib)]·4H₂O has a two-dimensional (2D) double-layer network structure with a (4, 4) topology, while [Co(INAIP)(phen)(H₂O)]·H₂O displays a one-dimensional chain structure, extending to a 2D net through the π–π interactions. In addition, the photoluminescence and degradation of methyl orange in a Fenton-like process using the complexes as catalysts were investigated.     

Synthesis of vanadium-phosphorus oxide catalysts supported on pyrogenic silica and titanium dioxide

Various methods for the preparation of vanadium-phosphorus oxide (VPO) catalysts supported on aerosils A-300 and A-50 and TiO₂ were studied: a traditional method (in an organic solvent under varying the support addition time, the nature of the reducing agent, and the degree of reduction of vanadium oxide) and barothermal and mechanochemical syntheses. With the use of XRD analysis, it was found that the composition of the resulting VPO phase depends on the time of support addition to the synthesis and the temperature of thermal treatment. Conditions for the formation of a supported phase of VOHPO₄·0.5H₂O, the precursor of the active component (VO)₂P₂O₇, were determined. The presence of vanadium in an oxidation state of +4 was demonstrated using EPR and UV-VIS spectroscopy. The specific surface areas and pore structures of the synthesized catalysts were determined. The catalytic properties of samples in the reactions of n-butane oxidation in an excess of the hydrocarbon and oxidative ethane dehydrogenation were studied. It was found that, as compared with traditional bulk VPO catalysts, the use of the synthesized supported VPO catalysts made it possible to improve the process characteristics of n-butane oxidation and did not change these characteristics in the reaction of oxidative ethane dehydrogenation.     

Synthesis and structure of organic clathrates p-hydroxybenzoic acid-water-acetic acid (1/2/5) and p-hydroxybenzoic acid-formic acid (1/10)

Organic clathrates p-HOC₆H₄COOH · 2H₂O · 5CH₃COOH and p-HOC₆H₄COOH · 10 HCOOH were synthesized for the first time, and their structure was studied by elemental analysis, X-ray powder diffraction, and thermogravimetry.     

Preparation and thermophysical properties of a novel form-stable CaCl<Subscript>2</Subscript>·6H<Subscript>2</Subscript>O/sepiolite composite phase change material for latent heat storage

In this work, CaCl₂·6H₂O/sepiolite was successfully designed and synthesized as a novel form-stable composite phase change material by vacuum impregnation method, using sepiolite as a sustainer and CaCl₂·6H₂O as phase change material. Scanning electron microscope and Fourier transform infrared spectroscopy measurements display that CaCl₂·6H₂O is filled into the porous structure of sepiolite by physical interactions. Phase transformation behavior and thermal stability were revealed from differential scanning calorimetry and thermogravimetric analysis, respectively. Results show that the melting enthalpy of the composite phase change material containing 70% CaCl₂·6H₂O can achieve 87.9 J g^?1, and the composite PCM has a good thermal stability in the temperature range from 25 to 100 °C. Meanwhile, the crystal structure of CaCl₂·6H₂O is maintained in the porous structure of sepiolite observed by X-ray diffraction. It means that sepiolite reduces the super-cooling of CaCl₂·6H₂O which ensures the good phase change behavior of the composites. These results exhibit that the CaCl₂·6H₂O/sepiolite composite phase change material possesses high latent heat. Moreover, low cost of the sepiolite enables the composites to be a good candidate for latent heat storage.     

Kinetic study of wood pyrolysis in presence of metal halides

The purpose of this work was to study the kinetics of wood pyrolysis in the presence of inorganic salts, representatives of classes of alkali and alkaline earth metal halides (NaCl, KCl, KBr, CaCl₂, BaCl₂·2H₂O) and Lewis acids (AlCl₃·6H₂O, FeCl₃·6H₂O, CuCl₂, CuBr₂, ZnCl₂·1.5H₂O, NiCl₂·6H₂O, SnCl₂·2H₂O) using TG-DSC. The activity of these catalysts was estimated by the temperature of the beginning of pyrolysis, charcoal yield and kinetic parameters, such as energy of activation and reaction order. Using the Lewis acids as catalysts for pyrolysis leads to a decrease in the temperature of the process beginning and the activation energy. In the presence of other catalysts activation energy does not significantly change. The increase of a seeming reaction order in the presence of Lewis acids possibly is a consequence of complication of the thermodestruction mechanism, with the appearance of new parallel competing stages.      

MgCl2·6H2O-BASED ZIRCONOCENE CATALYST FOR ETHYLENE POLYERIZATION

Several supported zirconocene catalysts were prepared by using MgCl_2·6H_2O as a precursor forproducing an active support. Such catalysts combined with methylaluminoxane (MAO) obtained by reactingMgCl_2·6H_2O with AlMe_3 show good activity for ethylene polymerization similar to that of anhydrousMgCl_2 supported zirconocene catalyst.     

Mechanochemical Synthesis and Characterization of Alkaline Earth Metal Terephthalates: M(C8H4O4)·nH2O (M = Ca,Sr, Ba)

The mechanochemical synthesis offers an easy access to obtain alkaline earth metal terephthalates M(C₈H₄O₄) · nH₂O (M = Ca, Sr, Ba). In the presented study we describe for the first time the mechanochemical synthesis of powders of Ca(C₈H₄O₄) · 3H₂O, Ca(C₈H₄O₄), Sr(C₈H₄O₄) · H₂O, and Ba(C₈H₄O₄), which so far were only synthesized as single crystals from aqueous solutions or by reactions in an autoclave. Furthermore, a new hydrate Ba(C₈H₄O₄) · 2(1.5)H₂O, not described so far in the literature, was prepared. All compounds were characterized by X‐ray powder diffraction, thermal analysis, elemental analysis, FT‐IR, and MAS NMR spectroscopic measurements.     

Synthesis of La<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>7</Subscript> by thermal treatment of mechanically activated salt mixture

A lanthanum zirconate La₂Zr₂O₇ was synthesized by soft mechanochemical method using zirconium oxynitrate ZrO(NO₃)₂·6H₂O and lanthanum carbonate La₂(CO₃)₃·8H₂O as reagents. Mechanical activation of the reagents was carried out in a centrifugal planetary ball mill. The processes occurring during calcination of the jointly and the separately mechanically activated salt mixture were studied using DSC, TG coupled with mass spectrometry, XRD analysis, and FTIR spectroscopy. It was shown that in the course of joint mechanical activation in the mill alongside with intimate mixing of the reagents and their amorphization exchange reaction occurred, producing lanthanum nitrate, basic lanthanum nitrate, basic zirconium carbonate, and hydrated zirconium oxide. The DSC curve of the jointly mechanically activated salt mixture showed a strong exothermic peak at 878 °C which was not associated with mass loss. This peak was attributed to La₂Zr₂O₇ crystallization in agreement with XRD data. Nanocrystalline lanthanum zirconate synthesized by annealing of the jointly mechanically activated salt mixture was characterized using XRD analysis, scanning, and transmission electron microscopy.     

Phase composition,formation parameters,and morphology of precipitates in the LiVO<Subscript>4</Subscript>-VOSO<Subscript>4</Subscript>-H<Subscript>2</Subscript>O system

The phase and chemical compositions of the precipitates formed in the LiVO₃-VOSO₄-H₂O system at initial pH within 1 ≤ pH ≤ 4 and 90°C were studied. The following phases were prepared: an α phase Li_1.4(VO)_1.3[H₂V₁₀O₂₈] · nH₂O and a β phase Li_{0.6 ? x} H_{1.4 + x} [V₁₂O_{31 ? y/2}] · nH₂O (0 ≤ x ≤ 0.5, 1.3 ≤ y ≤ 2.0) with a layered structure. Li_0.4V₂O₅ · H₂O nanorods with the interlayer distance 10.30 ± 0.08 Å were synthesized at 180°C in an autoclave. The morphology, IR spectra, and main formation processes for these polyvanadates were studied.     

Crystal structure of monoclinic modifications of zirconium and hafnium tetrafluoride trihydrates

The monoclinic modification of ZrF₄·3H₂O, isostructural to HfF₄·3H₂O, is synthesized and structurally studied for the first time. Unlike the triclinic modification of ZrF₄·3H₂O with a dimeric structure, the synthesized compound has a polymer structure formed from infinite chains composed of ZrF₆(H₂O)₂ groups sharing F…F edges. The crystal structure of HfF₄·3H₂O, previously determined by the photo method, is refined. The refined data on the geometric characteristics of the coordination polyhedron of the Hf atom and the system of hydrogen bonds in the structure are obtained.     

[Bmim]<Subscript>5</Subscript>[PNiW<Subscript>11</Subscript>O<Subscript>39</Subscript>]·3H<Subscript>2</Subscript>O an organic–inorganic hybrid as catalyst for one-pot pseudo-five-component synthesis of tetrazolyldiazepines

In this research, two heterogeneous organic–inorganic hybrid catalysts, [bmim]₃[PW₁₂O₄₀]·3H₂O and [bmim]₅[PNiW₁₁O₃₉]·3H₂O, have been prepared. The catalysts were fully characterized by several techniques such as elemental analyses, Fourier transform infrared spectroscopy, thermo-gravimetric analysis, scanning electron microscope and energy-dispersive X-ray analysis. Next, the hybrid catalysts have been used for the synthesis of functionalized diazepines containing tetrazole ring. Tetrazolyl-1H-spiro[benzo[b]cyclopenta[e][1,4] diazepines products were obtained in excellent yields and mild experimental conditions using [bmim]₅[PNiW₁₁O₃₉]·3H₂O as catalyst. This process was carried out via a one-pot, pseudo-five-component condensation reaction by means of a 1,2-diamine, isocyanide, TMSN3 and two molecules of a linear or cyclic ketone in methanol, at ambient temperature.