Complexation of managanese(II), cobalt(II), nickel(II), zink(II), and cadmium(II) cations with amoxicillin

The interaction of amoxicillin anions (Axn^?) with Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺, and Cd²⁺ in aqueous solution at 20°C and an ionic strength of 0.1 (KNO₃) has been studied pH-metrically. In a neutral and weak alkaline solution, MAxn⁺ and M(OH)Axn complexes are formed. The formation constants and the pH ranges of existence of these complexes have been determined.     

KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.     

Simultaneous Determination of Zn(II), Cu(II), Cd(II) and Pb(II) in Soil Samples Employing an Array of Potentiometric Sensors and an Artificial Neural Network Model

A sensor array of 9 potentiometric PVC sensors has been employed for the simultaneous determination of heavy metals in soil. Sensors were firstly characterized in their response: Nernstian behavior, a concentration range from ca. 10^?6 to 10^?2 M and selectivity coefficients confirming that all sensors had cross‐response for the target ions. The mixed response system was modeled employing Artificial Neural Networks. The proposed tool was applied to the determination of Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ in soils at the mg kg^?1 level with satisfactory performance. Results were compared and validated against AAS reference methodology, with correlations R²>0.948 for the four heavy metals considered.     

Study of the thermal decomposition of MSO4 (M = Zn(II), Cd(II), Hg(II)) in a sodium nitrate—potassium nitrate melt

MSO₄ (M = Zn²⁺, Cd²⁺, Hg²⁺) dissolves in the molten NaNO₃—KNO₃ eutectic and is decomposed on further heating. The kinetics of decomposition have been studied at different temperatures. The decomposition of CdSO₄ and HgSO₄ in the eutectic melt obey first-order kinetics whereas the decomposition of ZnSO₄ at 420–460°C obeys second-order kinetics. However, at 480°C the decomposition of ZnSO₄ obeys first-order kinetics. The mechanism of decomposition has been given as M²⁺ +SO^2?₄ +Na⁺ +K⁺ +2NO^?₃ ? (Na,K)SO₄ + M²⁺ +2NO^?₃ M²⁺ +NO^?₃ → MO+NO⁺₂ NO^?₃ +NO⁺₂ → NO₂ + $\text{1}\text{2}$O₂ Some of the end products have been analysed by X-ray diffraction.     

Interactions of the ethanolamino groups of nanofilms with Co(II), Ni(II), Cu(II), Zn(II), and Cr(III) ammoniates at the surface of PVC plates

Interactions of nanofilms containing ethanolamino groups with cobalt(II), nickel(II), copper(II), and zinc(II) ammoniates at the surface of polyvinylchloride plates and with chromium(III) ammoniate in a solution of ammonium chloride were studied. It was found that the groups of the film, together with chloride ions, displace all ammonia molecules from the inner coordination sphere of the metal. The average number of the ethanolamino N atoms of the film participating in formation of the metal ion coordination sphere is 3.35, 3.47, 3.67, 3.42, and 3.37 for Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cr³⁺ complexes, respectively. The average number of chloride ions is 2 for Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ and 3 for Cr³⁺. The coordination number of the central atoms is 6. The Cr³⁺ ion forms a coordination sphere composed of three N atoms and three chloride ions and a coordination sphere (charged 1+) made up of four N atoms and two chloride ions, with the third chloride ion being in the outer sphere. The Co²⁺, Ni²⁺, and Cu²⁺ ions form uncharged coordination spheres of two types: (1) with four N atoms and two chloride ions and (2) with three N atoms, two chloride ions, and the O atom of the ethanol hydroxyl group.     

Heats of formation of iodo-complexes of zinc(II), cadmium(II) and mercury(II) in aqueous solutions

Heats of formation of MeI⁺, MeI₂, MeI₃^? and MeI₄^2? where Me²⁺, Cd²⁺ or Hg²⁺ were determined in acidic solutions by flow microcalorimetry. Some gaps in the literature data were filled. In particular, ΔH₃ for the mercury(II) complex was determined and the ΔH₁, ΔH₂ + ΔH₃, ΔH₄ for zinc(II) complexes were measured in sodium free solutions to avoid ionic couple formation. For cadmium(II) complexes, existing data were confirmed. Thermodynamic functions are discussed in term of hard/soft interactions.     

Thermal decompositions of formates. Part IV. Thermal dehydrations of Mg(II), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) formate dihydrates

The thermal dehydrations of formate dihydrates of Mg(II), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) were studied by means of thermogravimetry, differential thermal analysis and differential scanning calorimetry in air.The reaction orders of dehydration obtained by the dynamic and the static methods were found to be 2/3 for all the salts examined, which indicated that the rate of dehydration was controlled by a chemical process at a phase boundary. This was confirmed by microscopic observation.The values of activation energy, frequency factor and the enthalpy change of dehydration for all salts examined, were 21–30 kcal mole^?1, 10¹⁰-10¹² sec^?1 and 28–31 kcal mole^?1, respectively.The temperature at which the dehydration occurred was regarded as a measure of the strength of the metalOH₂ bond, and this temperature increased with increasing the reciprocal of the radius of the metallic ion.     

Synthesis,structure, and solvent-extraction properties of tridentate oxime ligands and their cobalt(II), nickel(II), copper(II), zinc(II) complexes

Synthesis of four different types of ligands Ar[COC(NOH)R] _n (Ar = biphenyl, n = 1, HL¹; Ar = biphenyl, n = 2, H₂L²; Ar = diphenylmethane, n = 1, HL³; Ar = diphenylmethane, n = 2, H₂L⁴; R = furfurylamine in all ligands) and their dinuclear Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ complexes is reported herein. These compounds were characterized by elemental analysis, ICP-OES, FT-IR spectra, and magnetic susceptibility measurements. The ligands were further characterized by ¹H NMR. The results suggest that dinuclear complexes of HL¹ and HL³ have a metal to ligand mole ratio of 2: 2 and dinuclear complexes H₂L² and H₂L⁴ have a metal to ligand mole ratio of 2: 1. Square pyramidal or octahedral structures are proposed for complexes of oxime ligands. Furthermore, extraction abilities of the four ligands were also evaluated in chloroform using selected transition metal picrates such as Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺. The ligands show strong binding ability towards Hg²⁺ and Cu²⁺ ions.     

Use of clinoptilolite loaded with 1-(2-pyridylazo)-2-naphthol as a sorbent for preconcentration of Pb(II), Ni(II), Cd(II) and Cu(II) prior to their determination by flame atomic absorption spectroscopy

A solid phase extraction system for separation and preconcentration of trace amounts of Pb(II), Ni(II), Cd(II) and Cu(II) is proposed. The procedure is based on the adsorption of Pb²⁺, Ni²⁺, Cd²⁺ and Cu²⁺ ions on a column of 1-(2-pyridylazo)-2-naphthol (PAN) immobilised on surfactant-coated clinoptilolite prior to their determinations by Flame Atomic Absorption Spectroscopy (FAAS). The effective parameters including pH, sample volume, sample flow rate and eluent flow rate were also studied. The analytes collected on the column were eluted with 5 mL of 1 mol L^?1 nitric acid. A concentration factor of 180 can be achieved by passing 900 mL of sample through the column. The detection limits (3 s) for Cd, Cu, Pb and Ni were found to be 0.28, 0.12, 0.44 and 0.46 µg L^?1, respectively. The relative SDs at 10 µg L^?1 (n = 10) for analytes were in the range of 1.2–1.4%. The method was applied to the determination of Pb, Ni, Cd and Cu in water samples.     

Cobalt(II), Nickel(II), and Copper(II) Complexes with Diphenylthiocarbazide

New [ML(H₂O)₂] complexes (M = Co²⁺, Ni²⁺, or Cu²⁺; H₂L = diphenylthiocarbazide) were synthesized and studied using IR and diffuse reflection electronic spectroscopy, magnetic chemistry, conductometry, and DTA. The metals were shown to coordinate L^2–through nitrogen and sulfur atoms. The complex [CuL(H₂O)₂] is a dimer.     

Simultaneous Titration of Ternary Mixtures of Pb(II), Cd(II) and Cu(II) with Potentiometric Electronic Tongue Detection

An automatic titration method is reported to resolve ternary mixtures of transition metals (Pb²⁺, Cd²⁺ and Cu²⁺) employing electronic tongue detection and a reduced number of pre‐defined additions of EDTA titrant. Sensors used were PVC membrane selective electrodes with generic response to heavy‐metals, plus an artificial neural network response model. Detection limits obtained were ca. 1 mg L^?1 for the three target ions and reproducibilities 3.0 % for Pb²⁺, 4.1 % for Cd²⁺ and 5.2 % for Cu²⁺. The system was applied to contaminated soil samples and high accuracy was obtained for the determination of Pb²⁺. In the determination Cd²⁺ and Cu²⁺, sample matrix showed a significant effect.     

New Mononuclear and Binuclear Cu(II), Co(II), Ni(II), and Zn(II) Thiosemicarbazone Complexes with Potential Biological Activity: Antimicrobial and Molecular Docking Study

Herein, we report the synthesis of eight new mononuclear and binuclear Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ methoxy thiosemicarbazone (MTSC) complexes aiming at obtaining thiosemicarbazone complex with potent biological activity. The structure of the MTSC ligand and its metal complexes was fully characterized by elemental analysis, spectroscopic techniques (NMR, FTIR, UV-Vis), molar conductivity, thermogravimetric analysis (TG), and thermal differential analysis (DrTGA). The spectral and analytical data revealed that the obtained thiosemicarbazone-metal complexes have octahedral geometry around the metal center, except for the Zn²⁺-thiosemicarbazone complexes, which showed a tetrahedral geometry. The antibacterial and antifungal activities of the MTSC ligand and its (Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) metal complexes were also investigated. Interestingly, the antibacterial activity of MTSC- metal complexes against examined bacteria was higher than that of the MTSC alone, which indicates that metal complexation improved the antibacterial activity of the parent ligand. Among different metal complexes, the MTSC- mono- and binuclear Cu²⁺ complexes showed significant antibacterial activity against Bacillus subtilis and Proteus vulgaris, better than that of the standard gentamycin drug. The in silico molecular docking study has revealed that the MTSC ligand could be a potential inhibitor for the oxidoreductase protein.     

Interaction of ampicillin with Mn(II), Co(II), and Ni(II) ions

The interaction of ampicillin with the Mn²⁺, Co²⁺, and Ni²⁺ ions in aqueous solution at 20°C (supporting electrolyte 0.1 M KNO₃) was studied pH-metrically and spectrophotometrically. In weakly acidic and neutral media, Ni²⁺ forms with the anionic ampicillin species 1: 1 and 1: 2 complexes, whereas Mn²⁺ and Co²⁺ form only 1: 1 complexes. The stability constants of the complexes were determined, and their possible structures were discussed.     

Composition, stability, and structure of Cu(II), Ni(II), and Co(II) complexes with adipic acid dihydrazide in aqueous and aqueous-ethanol solutions

Solvation and complexation of Cu(II), Ni(II), and Co(II) with adipic acid dihydrazide (L) in aqueous and aqueous-ethanol solutions (ethanol mole fraction 0.07–0.68) were studied by spectrophotometry. The formation constants of the species M(LH)³⁺, ML²⁺, M₂L⁴⁺ (μ = Cu²⁺, Ni²⁺, Co²⁺), and also M₂L ₂ ⁴⁺ and ML ₂ ²⁺ (μ = Cu²⁺, Ni²⁺) were determined. With Cu(II), the complexes Cu(LH) ₂ ⁴⁺ , CuL(LH)³⁺, and Cu₂L(LH)⁵⁺ were also detected and characterized. Evidence is given for the hydrazide coordination mode: tridentate in ML²⁺, bidentate in M(LH)³⁺ and ML ₂ ²⁺ , and tetradentate in M₂L⁴⁺ and M₂L ₂ ⁴⁺ . The ligand exchange reactions involving CuL²⁺, Cu(LH)³⁺, Cu(LH) ₂ ⁴⁺ , CuL(LH)³⁺, CuL ₂ ²⁺ , and Cu₂L(LH)⁵⁺ in aqueous solutions of Cu(II) were revealed and kinetically characterized by nuclear magnetic relaxation. The heretofore unknown rate constants of formation of these complexes were calculated from the thermodynamic and kinetic parameters. Factors controlling the rate constants of the complex formation and chemical exchange are discussed.     

Complexes of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) with 4-chloro-2-methoxybenzoic acid anion

The complexes of 4-chloro-2-methoxybenzoic acid anion with Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ were obtained as polycrystalline solids with general formula M(C₈H₆ClO₃)₂·nH₂O and colours typical for M(II) ions (Mn – slightly pink, Co – pink, Ni – slightly green, Cu – turquoise and Zn – white). The results of elemental, thermal and spectral analyses suggest that compounds of Mn(II), Cu(II) and Zn(II) are tetrahydrates whereas those of Co(II) and Ni(II) are pentahydrates. The carboxylate groups in these complexes are monodentate. The hydrates of 4-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) heated in air to 1273 K are dehydrated in one step in the range of 323–411 K and form anhydrous salts which next in the range of 433–1212 K are decomposed to the following oxides: Mn₃O₄, CoO, NiO and ZnO. The final products of decomposition of Cu(II) complex are CuO and Cu. The solubility value in water at 293 K for all complexes is in the order of 10^–3 mol dm^–3. The plots of χ_M vs. temperature of 4-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II) and Cu(II) follow the Curie–Weiss law. The magnetic moment values of Mn²⁺, Co²⁺, Ni²⁺ and Cu²⁺ ions in these complexes were determined in the range of 76−303 K and they change from: 5.88–6.04 μ_B for Mn(C₈H₆ClO₃)₂·4H₂O, 3.96–4.75 μ_B for Co(C₈H₆ClO₃)₂·5H₂O, 2.32–3.02 μ_B for Ni(C₈H₆ClO₃)₂·5H₂O and 1.77–1.94 μ_B for Cu(C₈H₆ClO₃)₂·4H₂O.     

Die Chelate von Co(II), Ni(II), Cu(II), Zn(II) und Cd(II) mit Malonsäurehydrazid und dessen Arylidenderivaten

The metal chelates formed by the reaction of Co²⁺, Cu²⁺, Ni²⁺, Zn²⁺, and Cd²⁺ with malonic hydrazide and its arylidene derivatives are investigated. The i.r.-absorption spectra of the solid compounds supported the tetradentate character of these compounds; they also show that the ligand still attained the keto form. The shift of the C=O, C=N bands is utilized in determining the coordination bond length. The stoichiometry of the metal complexes, as studied by spectrophotometric and conductometric methods, is found to be metal ion: ligand =11. The apparent formation constants of the malonic hydrazide complexes are also determined.

---

---

Mit 4 Abbildungen     

Synthesis and characterization of Ni(II), Zn(II), and Cd(II) complexes with dithiophosphonate derivatives

Ammonium salts of p-methoxyphenyldithiophosphonic acid O-alkyl esters (H₃CO-C₆H₄-(RO)P(S)S⁻NH ₄ ⁺ ; R = C₂H₅,-CH₂CH₂CH₂CH₂-, and cyclopentyl) and their complexes with Ni²⁺, Cd²⁺, and Zn²⁺ were prepared. 2,4-Bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphetane-2,4-disulfide, the so-called Lawesson reagent, was treated with the corresponding alcohol to give the O-alkyl ester of the acid. Dry NH₃ was then purged through the solution of this ester to form the ammonium salt of the O-alkyl dithiophosphonic acids. Nickel complexes of these ligands were formed in acetic acid, while zinc and cadmium complexes were formed in water and an ethanol medium, respectively. The geometry of the coordinated atoms was square planar with Ni²⁺ and tetrahedral with Zn²⁺ and Cd²⁺. Using an alkanediol, two dithiophosphonic acids were bridged, thus forming a ligand with four S atoms for coordination. The zinc and cadmium complexes of these tetradentate ligands were also synthesized. The text was submitted by the authors in English.     

Novel coordination compounds: Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) cations with acesulfame/N,N-diethylnicotinamide ligands

Abstract

Five coordination complexes with Mn²⁺ (1), Co²⁺ (2), Ni²⁺ (3), Cu²⁺ (4), and Zn²⁺ (5) containing acesulfame (ace) and N,N-diethylnicotinamide (dena) ligands were synthesized and structural binding properties investigated. Four compounds (1, 2, 4, and 5) were examined with single crystal X-ray diffraction methods. The structures containing Mn(II), Co(II), and Zn(II) were iso-structural. Six-coordination of metal cations were completed with two moles dena and four aqua ligands. The dena ligands were coordinated via pyridine nitrogen as neutral-monodentate. Charge stabilities of the complexes are complemented by two moles monoanionic ace ligands, located outside of the coordination unit. In the Cu(II) complex, the coordination is completed by acidic nitrogen and carbonyl oxygen atoms of two ace ligands and pyridine nitrogen of two moles dena ligands. The coordination to Cu(II) for ace ligands was monoanionic-bidentate. All metal cations in the structure are distorted octahedral. Thermal decomposition of complexes begins with removal of the aqua molecules from the structures and is completed by combustion of organic ligands. The final decomposition products of all structures have been identified as corresponding metal oxides. Some biological applications (anti-fungal/anti-bacterial) were studied using 1–5.     

Stability studies on 1:1 or 1:3 stoichiometry complexes of hexaza tripods with zinc(II), copper(II), nickel(II) and cobalt(II)

The coordination properties of two C₃-symmetry hexaza tripods, 1,3,5-tri(2,5-diazahexyl)benzene (L1) and 1,3,5-tri(2,5-diazaheptyl)benzene (L2), towards Zn²⁺, Cu²⁺, Ni²⁺ and Co²⁺ ions, studied by potentiometric techniques, are reported. Both ligands form quite stable complexes either in a 1:1 or 1:3 M:L stoichiometry, presenting a preferential coordination order: Zn²⁺ < Cu²⁺ > Ni²⁺ > Co²⁺. It is observed that the different configurations of metal complexes are achieved due to the fact that tripodal ligands are flexible and not constrained into a rigid geometry.     

The Synthesis of a Bis(thiosemicarbazone) Macrocyclic Ligand and the Mn(II), Co(II), Zn(II) and 68Ga(III) Complexes

A 1,4,7,10-tetraazacyclododecane (cyclen) variant bearing two thiosemicarbazone pendant groups has been prepared. The ligand forms complexes with Mn²⁺, Co²⁺ and Zn²⁺. X-ray crystallography of the Mn²⁺, Co²⁺ and Zn²⁺ complexes showed that the ligand provides a six-coordinate environment for the metal ions. The Mn²⁺ and Zn²⁺ complexes exist in the solid state as racemic mixtures of the Δ(δ,δ,δ,δ)/Λ(λ,λ,λ,λ) and Δ(λ,λ,λ,λ)/Λ(δ,δ,δ,δ) diastereomers, and the Co²⁺ complex exists as the Δ(δ,δ,δ,δ)/Λ(λ,λ,λ,λ) and Δ(λ,λ,λ,δ)/Λ(δ,δ,δ,λ) diastereomers. Density functional theory calculations indicated that the relative energies of the diastereomers are within 10 kJ mol⁻¹. Magnetic susceptibility of the complexes indicated that both the Mn²⁺ and Co²⁺ ions are high spin. The ligand was radiolabelled with gallium-68, in the interest of developing new positron emission tomography imaging agents, which produced a single species in high radiochemical purity (>95%) at 90 °C for 10 min.