THE EFFECTS OF ULTRAVIOLET RADIATION EXPOSURE OF ADJACENT CELLS ON PLAQUE FORMATION WITH Herpes simplex VIRUS TYPE I

African green monkey kidney cells (CV-1P) were exposed to low fluences of 254 nm germicidal radiation and then infected with Herpes simplex virus, type I. The result of this treatment was an increase in viral plaque development rate, the large plaque effect (LPE). A measurement of the kinetics of plaque development suggested that a large portion of the effect could be due to events occurring in those cells that are adjacent to the initially infected cell. An infectious center assay was employed in order to isolate the effects of ultraviolet radiation (UV) on the initially infected cells from those effects on the adjacent cells that became infected as the plaque spread radially outward. Plaque development began earlier in UV irradiated cells and progressed at a uniformly accelerated rate compared to untreated cells. Results indicate that although the initially infected cell contributes to the LPE, the major effect is due to events that occur in the adjacent cells. Each round of viral replication appears to contribute equally to the LPE. The virally induced rate of fusion of the initially infected cell with its immediate neighbors is not affected by UV.     

Nanoscale topography reduces fibroblast growth, focal adhesion size and migration-related gene expression on platinum surfaces

Controlling cellular responses on biomaterial surfaces is crucial in biomedical applications such as tissue engineering and implantable prosthetics. Since cells encounter various nanoscale topographic features in their natural environment, it has been postulated that surface nanotopography may be an alternative route to fabricate biomaterials with a desirable cellular response. In this framework, we investigated the responses of primary human fibroblasts to platinum substrates with different levels of surface roughness at the nanoscale. The nanorough surfaces were fabricated by using the glancing angle deposition technique (GLAD). We found that levels of cellular responses depended on the surface roughness and the size of the nanoscale features. We showed that in response to nanotopography cells spread less and have an elongated morphology, displaying signs of actin cytoskeleton impairment and reduced formation of focal adhesion complexes. Although cell growth and adhesion were impaired on the nanorough substrates, cell viability was not affected by topography. To a minor extent our results also indicate that cell migration might be reduced on the nanorough surfaces, since a significantly lower gene expression of migration related genes were found on the roughest surfaces as compared to the flat reference. The results presented here demonstrate that surface nanotopography influences fibroblasts responses on platinum, which may be used to reduce cellular adhesion on platinum implant surfaces such as implantable neural electrodes.     

Pretilt angle of liquid crystals and liquid-crystal alignment on microgrooved polyimide surfaces fabricated by soft embossing method

In this study, the soft embossing method is proposed to fabricate periodical microgrooved structure on polyimide surfaces. These microgrooved polyimide surfaces are assembled to form liquid-crystal cells. It is found that the director of liquid crystals uniformly aligns along the groove direction even when the groove width is as high as 3 microm. The anchoring energy of these microgrooved polyimide surfaces is higher than that of the typical rubbed surfaces. The pretilt angle of liquid crystals is adjusted by tuning the surface polarity of the polyimide alignment layer, which is identified by the advancing contact angle of water. The surface polarity of polyimide alignment layers is manipulated by simply mixing two kinds of polyimide: a more hydrophilic one and a more hydrophobic one. It is found that the pretilt angle of liquid crystals increases along with the advancing contact angle of water on the alignment layer under the condition of a fixed surface topography.     

The effect of surface microtopography of poly(dimethylsiloxane) on protein adsorption, platelet and cell adhesion

Chemical homogeneous poly(dimethylsiloxane) (PDMS) surface with dot-like protrusion pattern was used to investigate the individual effect of surface microtopography on protein adsorption and subsequent biological responses. Fibrinogen (Fg) and fibronectin (Fn) were chosen as model proteins due to their effect on platelet and cell adhesion, respectively. Fg labeled with ¹²⁵I and fluorescein isothiocyanate (FITC) was used to study its adsorption on flat and patterned surfaces. Patterned surface has a 46% increase in the adsorption of Fg when compared with flat surface. However, the surface area of the patterned surface was only 8% larger than that of the flat surface. Therefore, the increase in the surface area was not the only factor responsible for the increase in protein adsorption. Clear fluorescent pattern was visualized on patterned surface, indicating that adsorbed Fg regularly distributed and adsorbed most on the flanks and valleys of the protrusions. Such distribution and local enrichment of Fg presumably caused the specific location of platelets adhered from platelet-rich plasma (PRP) and flowing whole blood (FWB) on patterned surface. Furthermore, the different combination of surface topography and pre-adsorbed Fn could influence the adhesion of L929 cells. The flat surface with pre-adsorbed Fn was the optimum substrate while the virgin patterned surface was the poor substrate in terms of L929 cells spread.     

Synthetic Heparanase Inhibitors Can Prevent Herpes Simplex Viral Spread

Herpes simplex virus (HSV-1) employs heparan sulfate (HS) as receptor for cell attachment and entry. During late-stage infection, the virus induces the upregulation of human heparanase (Hpse) to remove cell surface HS allowing viral spread. We hypothesized that inhibition of Hpse will prevent viral release thereby representing a new therapeutic strategy for HSV-1. A range of HS-oligosaccharides was prepared to examine the importance of chain length and 2-O-sulfation of iduronic moieties for Hpse inhibition. It was found that hexa- and octasaccharides potently inhibited the enzyme and that 2-O-sulfation of iduronic acid is tolerated. Computational studies provided a rationale for the observed structure–activity relationship. Treatment of human corneal epithelial cells (HCEs) infected with HSV-1 with the hexa- and octasaccharide blocked viral induced shedding of HS which significantly reduced spread of virions. The compounds also inhibited migration and proliferation of immortalized HCEs thereby providing additional therapeutic properties.     

Microtopography based on inverse opal structures regulates the behavior of bone marrow‐derived mesenchymal stem cells

Physical cues from the extracellular microenvironment play an important role in regulating cell behavior, such as adhesion, migration, and differentiation. Many studies have shown that different physical parameters (eg, stiffness and topography) could modulate the in vitro differentiation of mesenchymal stem cells (MSCs), which had multilineage differentiation potential and could be easily isolated from various tissues such as bone marrow, adipose tissue, and the umbilical cord. However, the underlying mechanism of the topographical influence on MSCs and the detailed cell‐substrate interaction remain unclear. Here, we present oriented elliptical inverse opal structures for regulating the morphology and alignment of bone marrow‐derived MSCs. The inverse opal structures were made through a convenient bottom‐up approach of self‐assembly, which is facile and cost effective. MSCs cultured on the oriented structures were highly aligned and extended highly oriented thick lamellipodia. Moreover, the oriented substrates cracked along the lateral boundary of the cells, suggesting that a strong cell‐substrate interaction was induced by the response of MSCs to the oriented topography. These features of the oriented elliptical topography indicated their promising value in stem cell research and tissue engineering.     

Effect of ASP2151, a herpesvirus helicase-primase inhibitor, in a guinea pig model of genital herpes

ASP2151 is a herpesvirus helicase-primase inhibitor with antiviral activity against varicella zoster virus and herpes simplex virus types 1 (HSV-1) and 2 (HSV-2). Here, we examined the potency and efficacy of ASP2151 against HSV in vitro and in vivo. We found that ASP2151 was more potent in inhibiting the replication of HSV-1 and HSV-2 in Vero cells in the plaque reduction assay and had greater anti-HSV activity in a guinea pig model of genital herpes than did acyclovir and valacyclovir (VACV), respectively. Oral ASP2151 given from the day of infection reduced peak and overall disease scores in a dose-dependent manner, resulting in complete prevention of symptoms at the dose of 30 mg/kg. The 50% effective dose (ED(50)) values for ASP2151 and VACV were 0.37 and 68 mg/kg, respectively, indicating that ASP2151 was 184-fold more potent than VACV. When ASP2151 was administered after the onset of symptoms, the disease course of genital herpes was suppressed more effectively than by VACV, with a significant reduction in disease score observed one day after starting ASP2151 at 30 mg/kg, whereas the therapeutic effect of VACV was only evident three days after treatment at the highest dose tested (300 mg/kg). This indicated that ASP2151 possesses a faster onset of action and wider therapeutic time window than VACV. Further, virus shedding from the genital mucosa was significantly reduced with ASP2151 at 10 and 30 mg/kg but not with VACV, even at 300 mg/kg. Taken together, our present findings demonstrated the superior potency and efficacy of ASP2151 against HSV.     

Engineering Substrate Topography at the Micro‐ and Nanoscale to Control Cell Function

The interaction of mammalian cells with nanoscale topography has proven to be an important signaling modality in controlling cell function. Naturally occurring nanotopographic structures within the extracellular matrix present surrounding cells with mechanotransductive cues that influence local migration, cell polarization, and other functions. Synthetically nanofabricated topography can also influence cell morphology, alignment, adhesion, migration, proliferation, and cytoskeleton organization. We review the use of in vitro synthetic cell–nanotopography interactions to control cell behavior and influence complex cellular processes, including stem‐cell differentiation and tissue organization. Future challenges and opportunities in cell–nanotopography engineering are also discussed, including the elucidation of mechanisms and applications in tissue engineering.     

A facile route to regular and nonregular dot arrays by integrating nanoimprint lithography with sphere‐forming block copolymer directed self‐assembly

Nanoimprint lithography is used to create large‐area two‐dimensional prepatterns with tunable topographic heights in a resist layer. The resist prepatterns are applied to direct the self‐assembly of sphere‐forming polystyrene‐block‐polydimethylsiloxane block copolymers so as to form sparse nonregular nanodot arrays with flexible pattern layouts from high‐topography prepattern or dense regular nanodot arrays with a multiplicative pattern density from low‐topography prepattern. By precisely controlling the topographic height in substrate prepatterns, the origin of directed self‐assembly of block copolymer spheres using low‐topography prepattern is found to be topographic contrast. High‐fidelity pattern transfer from spherical block copolymer nanotemplates to functional materials indicates a promising route to ultrahigh density nanodevices. Bit‐patterned media over 1 teradot/in on a 2.5‐inch disk are fabricated, thus presenting future magnetic data storage media with great areal density growth potential. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 361–367     

Spatiotemporal control of cell adhesion on a self-assembled monolayer having a photocleavable protecting group

Control of cell adhesion is a key technology for cell-based drug screening and for analyses of cellular processes. We developed a method to spatiotemporally control cell adhesion using a photochemical reaction. We prepared a cell-culturing substrate by modifying the surface of a glass coverslip with a self-assembled monolayer of an alkylsiloxane having a photocleavable 2-nitrobenzyl group. Bovine serum albumin (BSA) was adsorbed onto the substrate to make the surface inert to cell adhesion. When exposed to UV light, the alkylsiloxane underwent a photocleavage reaction, leading to the release of BSA from the surface. Fibronectin, a protein promoting cell adhesion, was added to cover the irradiated regions and made them cell-adhesive. Seeding of cells on this substrate resulted in their selective adhesion to the illuminated regions. By controlling the sizes of the illuminated regions, we formed cell-adhesive spots smaller than single cells and located focal adhesions of the cells. Moreover, by subsequently illuminating the region alongside the cells patterned on the substrate in advance, we released their geometrical confinements and induced migration and proliferation. These manipulations were conducted under a conventional fluorescence microscope without any additional instruments. The present method of cell manipulation will be useful for cell biological studies as well as for the formation of cell arrays.     

High‐Throughput Isolation of Cell Protrusions with Single‐Cell Precision for Profiling Subcellular Gene Expression

Invading cancer cells extend cell protrusions, which guide cancer‐cell migration and invasion, eventually leading to metastasis. The formation and activity of cell protrusions involve the localization of molecules and organelles at the cell front; however, it is challenging to precisely isolate these subcellular structures at the single‐cell level for molecular analysis. Here, we describe a newly developed microfluidic platform capable of high‐throughput isolation of cell protrusions at single‐cell precision for profiling subcellular gene expression. Using this microfluidic platform, we demonstrate the efficient generation of uniform cell‐protrusion arrays (more than 5000 cells with protrusions) for a series of cell types. We show precise isolation of cell protrusions with high purity at single‐cell precision for subsequent RNA‐Seq analysis, which was further validated by RT‐qPCR and RNA FISH. Our highly controlled protrusion isolation method opens a new avenue for the study of subcellular functional mechanisms and signaling pathways in metastasis.     

Scanning electron microscopy of differentiated liver cells transformed in vitro by chemical carcinogens

A scanning electron microscopy study was carried out on differentiated liver cells transformed in vitro by three chemical carcinogens into cells that give rise to carcinomas. The results indicate that the transformed cells grow as a rule in tightly adherent monolayers but differ in topography. There is a tendency toward heterogeneity in cell shape compared to the normal and on the whole toward a larger number of surface microvilli in the malignant cell population. However, both in sparse and confluent cultures the topographic differences are often not striking enough to unequivocally distinguish single neoplastic cells from the normal.     

PHOTODYNAMIC TREATMENT OF HERPES SIMPLEX VIRUS INFECTION IN VITRO

Abstract— The effects of photodynamic action on in vitro herpes simplex virus infections of CV-1 monkey kidney fibroblasts or human skin fibroblasts were determined using proflavine sulfate and white fluorescent lamps. Photodynamic treatment of confluent cell monolayers prior to virus infection inactivated cell capacity, i.e. the capacity of the treated cells to support subsequent virus growth as measured by plaque formation. The capacity of human cells was more sensitive to inactivation than the capacity of monkey cells when 6 μM proflavine was used. Treated cell monolayers recovered the capacity to support virus plaque formation when virus infection was delayed four days after the treatment. Experiments in which the photodynamically treated monolayers were infected with UV-irradiated virus demonstrated that this treatment induced Weigle reactivation in both types of cells. This reactivation occurred for virus infection just after treatment or 4 days later. A Luria-Latarjet-type experiment was also performed in which cultures infected with unirradiated virus were photodynamically treated at different times after the start of infection. The results showed that for the first several hours of the virus infection the infected cultures were more sensitive to inactivation by photodynamic treatment than cell capacity. By the end of the eclipse period the infected cultures were less sensitive to inactivation than cell capacity. Results from extracellular inactivation of virus grown in monkey cells at 6 μM proflavine indicated that at physiological pH the virus has a sensitivity to photodynamic inactivation similar to that for inactivation of cell capacity. The combined data indicated that photodynamic treatment of the cell before or after virus infection could prevent virus growth. Thus, photodynamic inactivation of infected and uninfected cells may be as important as inactivation of virus particles when considering possible mechanisms in clinical photodynamic therapy for herpes simplex.     

PNA-based probe for quantitative chemiluminescent in situ hybridisation imaging of cellular parvovirus B19 replication kinetics

To allow the ultrasensitive localization and the quantitative detection of parvovirus B19 nucleic acids in single infected cells at various times post-infection, a peptide nucleic acid (PNA)-based in situ hybridisation (ISH) assay with chemiluminescent detection has been developed. The assay is based on the use of a biotin-labelled PNA probe detected by a streptavidin-linked alkaline phosphatase and a chemiluminescent dioxetane phosphate derivative substrate. The luminescent signal was quantified and imaged with an ultrasensitive nitrogen-cooled CCD camera connected to an epifluorescence microscope. The assay was used to analyze the parvovirus B19 infection process in cell cultures and to quantify the amount of viral nucleic acids at different times after infection.The chemiluminescent ISH-PNA assay is characterized by high resolution providing a sharp localization of B19 nucleic acids within single cells, with higher sensitivity with respect to conventional colorimetric ISH detection. Thanks to the high detectability and wide linear range of chemiluminescence detection, an objective evaluation of the percentage of infected cells, which reached its maximum at 24 h after infection, following a B19 virus infectious cycle could be accurately evaluated. Chemiluminescence detection also allowed the quantitative analysis of viral nucleic acids at the single-cell level, showing a continuous increase of the content of viral nucleic acids in infected cells with time after infection.The developed chemiluminescent ISH-PNA assay could thus represent a potent tool for the assessment of viral infections and for the quantitative evaluation of the virus nucleic acid load of infected cells in virus studies and diagnostics.     

Rapid Generation of Cell Gradients by Utilizing Solely Nanotopographic Interactions on a Bio‐Inert Glass Surface

The control of cell gradients is critical for understanding many biological systems and realizing the unique functionality of biomimetic implants. Herein, we report a nanotopographic gradient strategy that can rapidly generate cell gradients on a nanodendritic silica substrate without any chemical modification. We can achieve controllable cell gradients within only half an hour of cell incubation solely induced by the topographic effect of the gradient nanodendrites. We also demonstrate that cell gradients can be modulated by the combination of nanotopographic and chemical gradients. The results reveal that the enhanced topographic interactions between the nanodentritic structure and nanoscaled filopodia of the cells mainly contribute to the generation of cell gradients.     

生物兼容蛋白水凝胶微图案的光刻平版印刷

通过简易的紫外光刻平版印刷技术,对无化学修饰的生物兼容性良好的天然牛白蛋白的水相光刻胶进行微图案化加工,获得了可用作微光栅器件的蛋白质微条纹结构,表征了蛋白质凝胶微条纹图案的宏观性状.结果表明,其折射散射彩虹色明显,单束激光经过后的衍射条纹对称度高,可获得11级衍射条纹.通过改变参数实现了条纹的可控褶皱.将图案化的蛋白水凝胶膜用于肝癌细胞的培养,实现了细胞图案化排布.     

Scanning electrochemical microscopy of living cells: Part 2. Imaging redox and acid/basic reactivities

Amperometric feedback and potentiometric modes of the scanning electrochemical microscope (SECM) have been used to image the topography and map redox and acid–base activities in single mammalian cells. The topographic images of cells were obtained using hydrophilic redox mediators, which cannot penetrate the cell membrane. In contrast, with a hydrophobic mediator one can map redox reactivity with a micrometer or submicrometer spatial resolution. The images obtained with oxygen used as a redox mediator show the distribution of the diffusion rate of oxygen in the cell membrane and inside the cell. The acid release by the cell was imaged with a Sb tip in a potentiometric mode, and the possibility of redox and pH imaging of the same cell with same tip is demonstrated. Significant differences were detected in the redox and pH images of normal human breast epithelial cells and metastatic breast cancer cells.     

Subcellular topological effect of particle monolayers on cell shapes and functions

We studied topological effects of subcellular roughness displayed by a closely packed particle monolayer on adhesion and growth of endothelial cells. Poly(styrene-co-acrylamide) (SA) particles were prepared by soap-free emulsion copolymerization. Particle monolayers were prepared by Langmuir–Blodgett deposition using particles, which were 527 (SA053) and 1270 nm (SA127) in diameter. After 24-h incubation, cells tightly adhered on a tissue culture polystyrene dish and randomly spread. On the other hand, cells attached on particle monolayers were stretched into a narrow stalk-like shape. Lamellipodia spread from the leading edge of cells attached on SA053 monolayer to the top of the particles and gradually gathered to form clusters. This shows that cell–cell adhesion became stronger than cell–substrate interaction. Cells attached to SA127 monolayer extended to the reverse side of a particle monolayer and engulfed particles. They remained immobile without migration 24 h after incubation. This shows that the inhibition of extensions on SA127 monolayer could inhibit cell migration and cell proliferation. Cell growth on the particle monolayers was suppressed compared with a flat TCPS dish. The number of cells on SA053 gradually increased, whereas that on SA127 decreased with time. When the cell seeding density was increased to 200,000 cells cm⁻², some adherent cells gradually became into contact with adjacent cells. F-actin condensations were formed at the frame of adherent cells and the thin filaments grew from the edges to connect each other with time. For the cell culture on SA053 monolayer, elongated cells showed a little alignment. Cells showed not arrangement of actin stress fibers but F-actin condensation at the contact regions with neighboring cells. Interestingly, the formed cell monolayer could be readily peeled from the particle monolayer. These results indicate that endothelial cells could recognize the surface roughness displayed by particle monolayers and the response was dependent on the pitch of particle monolayers.     

Methodology for calculating the volume of condensate droplets on topographically modified, microgrooved surfaces

Liquid droplets on micropatterned surfaces consisting of parallel grooves tens of micrometers in width and depth are considered, and a method for calculating the droplet volume on these surfaces is presented. This model, which utilizes the elongated and parallel-sided nature of droplets condensed on these microgrooved surfaces, requires inputs from two droplet images at ? = 0° and ? = 90°--namely, the droplet major axis, minor axis, height, and two contact angles. In this method, a circular cross-sectional area is extruded the length of the droplet where the chord of the extruded circle is fixed by the width of the droplet. The maximum apparent contact angle is assumed to occur along the side of the droplet because of the surface energy barrier to wetting imposed by the grooves--a behavior that was observed experimentally. When applied to water droplets condensed onto a microgrooved aluminum surface, this method was shown to calculate the actual droplet volume to within 10% for 88% of the droplets analyzed. This method is useful for estimating the volume of retained droplets on topographically modified, anisotropic surfaces where both heat and mass transfer occur and the surface microchannels are aligned parallel to gravity to assist in condensate drainage.     

Protein adsorption and cell adhesion on polyurethane/Pluronic® surface with lotus leaf-like topography

Lotus leaf-like polyurethane/Pluronic^® F-127 surface was fabricated via replica molding using a natural lotus leaf as the template. Water contact angle measurements showed that both the hydrophobicity of the unmodified polyurethane (PU) surface and the hydrophilicity of the PU/Pluronic^® surface were enhanced by the construction of lotus leaf-like topography. Protein adsorption on the PU/Pluronic^® surface without topographic modification was significantly lower than on the PU surface. Adsorption was further reduced when lotus leaf-like topography was constructed on the PU/Pluronic^® surface. Cell culture experiments with L929 cells showed that adhesion on the PU/Pluronic^® surface with lotus leaf-like topography was low and adherent cells were spherical and of low viability. The PU/Pluronic^® surface with lotus leaf-like topography thus appears to be resistant to nonspecific protein adsorption and to cell adhesion, and these effects derive from the both chemical composition and topography. The results suggest a new strategy based on surface topography for the design of antifouling materials.