Sorption capacity of new cation exchangers based on oil residue and epoxy resin for chromium(III) ions

Sorption of chromium(III) ions by cation exchangers based on oil residue and ED-20 epoxy resin was studied in comparison with that of KU-2 × 8 industrial cation exchanger.     

Determination of copper in urine by diffuse reflectance spectroscopy

A possibility of determining copper(II) after adsorption on polyacrylonitrile fiber filled with a KU-2 cation exchanger with immobilized 1-(2-pyridylazo)-2-naphthol (PANF–KU-2–PAN) is studied. The diffuse reflectance spectra of the carrier discs before and after the adsorption of copper in the batch mode are recorded. The dependences of the analytical signals of the copper complex on PANF–KU-2–PAN on adsorption conditions are studied. The conditions for determining 0.05–0.40 μg/mL of copper(II) by measuring diffuse reflection coefficient at 640 nm or visually by a color scale after the adsorption of copper from 20 mL of a solution containing 0.01 M of HCl are found. The determination of 0.1 μg/mL of copper does not interfered with equal amounts of Co, Zn, and Pb and double amounts of Ag, Fe(III), Cd, Mn(II), Bi(III), and Cr(III). The procedure is used for urine analysis. The following conditions of the preparation of urine samples for the determination of copper were selected: boiling with hydrogen peroxide followed by acidification to pH 2. A procedure for determining copper in urine with a limit of detection of 0.03 μg/mL was developed; the relative standard deviation does not exceed 25%; the duration of analysis of 5–6 samples is 30–35 min.     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.     

Ionenaustausch Bei Hohen Konzentrationen der Lösung VI. Einfluss des Vernetzungsgrades Auf die Sorpton Anionischer Komplexe von Thallium(III) und Eisen(III) Durch Sulfonsaure Kationaustrauscher

Ion exchange at high concentrations of the mobile phase. VI. The influence of the degree of crosslinking on the sorption of anionic complexes of Tl(III) and Fe(III) by sulphonic cation exchangers The sorption of TI(III) and Fe(III) on sulphonic cation exchangers with 2-16% divinylbenzene has been investigated. In the range of concentration 4-8 mol/1 HBr and 4-10 mol/l HC1 the distribution coefficients decrease with the degree of crosslinking of the matrix. The same dependence has been observed for the selectivity of sorption, i.e. the quotient of the volume distribution coefficient of the trace component and the Donnan coefficient of the electrolyte.     

Epoxidation of flax oil with hydrogen peroxide in a conjugate system in the presence of acetic acid and chlorinated cation exchanger KU-2×8 as catalyst

Epoxidation of flax oil in a conjugate system with hydrogen peroxide using chlorinated cation exchanger KU-2×8 as catalyst was studied. The influence exerted on the epoxidation rate and target product quality by the temperature, stirring intensity, catalyst amount, and reactant ratio was examined.     

Fluidization of cation exchangers with regenerating sulfuric acid solution

Dependences of the bed expansion of cation exchangers (weakly acidic Lewatit CNP 80 and strongly acidic KU-2×8) on the flow velocity, temperature, and concentration of the regenerating sulfuric acid solution were determined. An equation describing the dependence of the bed expansion of cation exchangers on the flow velocity, temperature, and concentration of sulfuric acid, common to the two ion exchangers, was derived, which allows a priori determination of the extent of bed expansion in regeneration of cation exchangers in the fluidization mode.     

Sorption of mercury(II), zinc(II), and iron(III) thiocyanate complexes on AV-17 anion exchanger and KU-2 cation exchanger modified with rhodamine Zh

Sorption of anionic mercury(II), zinc(II), and iron(III) thiocyanate complexes on KU-2 cation exchanger modified with Rhodamine Zh and on AV-17-8 strongly basic anion exchanger were studied in relation to the concentration of SCN^? ions and solution pH. Optimal conditions of sorption of metal complexes from dilute solutions were found.     

Potentialities of fibrous ion-exchange materials in the determination of sulfate ions by color reactions of barium with organic reagents on a solid phase

The possibility of the determination of sulfate ions with the use of fibrous materials filled with ion exchangers on the basis of color reactions of barium with the organic reagents Arsenazo III, Orthanilic B, and Orthanilic K on a solid phase was examined. A polyacrylonitrile fiber filled the cation exchanger KU-2; anion exchangers AB-17, A-5, ANKF-211, and EDE-10p; and polyampholyte ANKB-50 (PANV-ANKB-50) was used as the support. The study of the different techniques of the sorption of the reaction components demonstrated the efficiency of the two systems involving PANV-ANKB-50. The determination of sulfates is possible because of the sorption of the excess barium remaining after the reaction with sulfate ions in the solution and its detection on the solid phase with a solution of Arsenazo III or the detection of the excess barium remaining after the interaction with the solution of sulfate ions on the solid phase with a solution of Orthanilic K. The calibration plots are linear in the concentration range of sulfate ions 10^?4–10^?5 M.     

Kinetics of the reactions of tert-butanol with C2-C5 alcohols on sulfo cation exchangers

The kinetics of etherification of tert-butanol with aliphatic alcohols on gel KU-2×8 and macroporous KU-23 sulfo cation exchangers was studied. The first order of reaction with respect to tert-butanol and the -CSO₃H groups of a catalyst was established. The activation energy of the process observed on KU-2×8 was 60–95 kJ/mol. It was shown that the etherification of tert-butanol on KU-2×8 occurred in a surface layer. The reactivity of primary alcohols introduced into the reaction with tert-butanol increased with their molecular weights (C₂–C₅). The rate of reaction with secondary alcohols was lower than that with primary alcohols.     

Sorption of chromium(VI) on ion-exchange resins and sorbents

Sorption of Cr(VI) on AV-17 and EDE-10P anion exchangers, KU-2 and KB-4 cation exchangers, activated charcoal, and foamed graphite (STRG) is studied.     

Pre-steady state reactivity of 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin iron(III) chloride with hydrogen peroxide

A stopped-flow study has shown that tetrakis(pentafluoro-phenyl)porphyrin iron(III) chloride reacts rapidly (<3 ms) with hydrogen peroxide to form a Fe(III)-H(2)O(2) complex where log K = 2.39. This subsequently undergoes rapid intramolecular conversion (k = 4.4 s(-1)) to an iron(IV) intermediate, which in turn reacts with hydrogen peroxide (k' = 54.3 M(-1) s(-1)) to reform the original Fe(III)-H(2)O(2) complex.     

Hydrogen peroxide formation upon oxidation of oxalic acid in presence and absence of oxygen and of manganese(II)--III. Iron(III) and copper(II) as retarders

The formation of considerable amounts of hydrogen peroxide upon the slow addition of various oxidizing agents to oxalic acid in dilute sulphuric acid in the presence of oxygen and Mn(II) is greatly retarded in the presence of Fe(III) or Cu(II). With hydrogen peroxide as oxidizing agent and a trace of Fe(II) there is considerable decomposition of peroxide, under a nitrogen atmosphere, after a few hours at 25 degrees in light (from a tungsten lamp), and less decomposition in the dark. This decomposition is decreased by Mn(II) and also when the original mixture contains Fe(III). With oxygen as the oxidizing agent Fe(II) is about 100 times as effective an inhibitor of peroxide formation as Fe(III). With all oxidizing agents used, Cu(II) is some 6-10 times more effective as a retarder than Fe(III). The inhibition is accounted for by the reaction Fe(III) [or Cu(II)] + CO(-)(2) --> Fe(II) [or Cu(I)] + CO(2).     

Synthesis of 2-(Bicyclo[2.2.1]hept-2-yloxy)ethyl Carboxylates

Esterification of aliphatic carboxylic acids with 2-(bicyclo[2.2.1]hept-2-yloxy)ethanol and 2-(5-methylbicyclo[2.2.1]hept-2-yloxy)ethanol in the presence of KU-2-8 cation exchanger (H⁺ form) afforded a series of new compounds containing both ester and ether moieties.     

Zeolite-encapsulated Cr(III), Fe(III), Ni(II), Zn(II) and Bi(III) salpn complexes as catalysts for the decomposition of H2O2 and oxidation of phenol

Cr(III), Fe(III), Bi(III), Ni(II) and Zn(II) complexes of N,N′-bis(salicylidene)propane-1,3-diamine (H₂salpn) encapsulated in Y-zeolite were prepared by flexible ligand method. These complexes were characterized by chemical and thermal analyses, FT-IR and electronic spectral studies and their XRD pattern. The encapsulated materials are active catalysts for the decomposition of hydrogen peroxide and for the oxidation of phenol using H₂O₂ as oxidant with good selectivity.     

Potentiometric flow-injection determination of trace hydrogen peroxide based on its induced reaction in iron(III)-iron(II) potential buffer containing bromide and molybdenum(VI)

A rapid and highly sensitive potentiometric flow-injection method for the determination of trace hydrogen peroxide was developed by use of an Fe(III)-Fe(II) potential buffer solution containing bromide and Mo(VI). The analytical method was based on a linear relationship between a concentration of hydrogen peroxide and a largely transient potential change of an oxidation-reduction potential electrode due to bromine generated by the reaction of hydrogen peroxide with the potential buffer solution. The oxidation of bromide to bromine by hydrogen peroxide occurred very rapidly with the assistance of Mo(VI) when Fe(II) existed in the potential buffer solution. It was estimated by batchwise experiments that hydroxyl radical, OH., was generated by the reaction of hydrogen peroxide with Fe(II) as an intermediate, and subsequently oxidized bromide to bromine. In a flow system, analytical sensitivities to hydrogen peroxide obtained by the detection of the transient change of potential were enhanced about 75 fold compared with those obtained by using the potential change caused by the reaction of hydrogen peroxide with the potential buffer solution without bromide and Mo(VI). Sensitivities increased with decreasing concentration of the Fe(III)-Fe(II) buffer in the reagent solution. The detection limit (S/N = 3) of 4 x 10(-7) M (13.6 ppb) was achieved by using the 1 x 10(-4) M Fe(III)-Fe(II) buffer containing 0.4 M NaBr, 1.0 M H(2)SO(4) and 0.5% (NH(4))(6)Mo(7)O(24). Analytical throughput was approximately 40 h(-1) and the RSD (n = 6) was 0.6% for measurement of 4 x 10(-6) M hydrogen peroxide. The proposed method was applied to the determination of hydrogen peroxide in real rainwater samples, and was found to provide a good recovery for H(2)O(2) added to rainwater samples.     

The chemical precipitation of nickel on ion exchangers and active carbons

The chemical precipitation of nickel in the form of poorly soluble precipitates in ion exchanger matrices and on active carbons from solutions of nickel chloride and chemical nickel plating electrolytes was studied. The sorption of nickel ions from a solution of nickel chloride occurs most effectively on Purolite D24002 macroporous chelate forming ion exchanger, KU-23-15/100 sulfo cation exchanger, and KU-2-8 gel sulfo cation exchanger. Nickel enters sulfo cation exchangers in the form of counterions, and is adsorbed on Purolite D24002 largely because of complex formation. The subsequent precipitation of nickel in the solid state in matrix pores liberates ionogenic centers, which allows repeated sorption cycles to be performed. After three chemical precipitation cycles under static conditions, the amount of nickel is higher by 170–250% than the ion exchange capacity of the sorbents. The electrolyte of chemical nickel plating contains nickel predominantly in the form of negatively charged and neutral complexes with glycine, which cannot form bonds with the matrices under study. It is therefore reasonable to perform sorption at decreased solution pH values.     

Acid-Base Properties and Structural Features of Composite Ion Exchangers Based on KU-23 and KM-2p Cation Exchangers and Hydrated Zirconium Oxide

A method for introduction of hydrated zirconium oxide into macroporous cation exchangers KU-23 and KM-2p and the acid-base properties and structural features of the composite ion exchangers are described.     

A new dinuclear heme-copper complex derived from functionalized protoporphyrin IX

A new biomimetic model for the heterodinuclear heme/copper center of respiratory oxidases is described. It is derived from iron(III) protoporphyrin IX by covalent attachment of a Gly-L-His-OMe residue to one propionic acid substituent and an amino-bis(benzimidazole) residue to the other propionic acid substituent of the porphyrin ring, yielding the Fe(III) complex 1, and subsequent addition of a copper(II) or copper(I) ion, according to needs. The fully oxidized Fe(III)/Cu(II) complex, 2, binds azide more strongly than 1, and likely contains azide bound as a bridging ligand between Fe(III) and Cu(II). The two metal centers also cooperate in the reaction with hydrogen peroxide, as the peroxide adducts obtained at low temperature for 1 and 2 display different optical features. Support to this interpretation comes from the investigation of the peroxidase activity of the complexes, where the activation of hydrogen peroxide has been studied through the phenol coupling reaction of p-cresol. Here the presence of Cu(II) improves the catalytic performance of complex 2 with respect to 1 at acidic pH, where the positive charge of the Cu(II) ion is useful to promote O-O bond cleavage of the iron-bound hydroperoxide, but it depresses the activity at basic pH because it can stabilize an intramolecular hydroxo bridge between Fe(III) and Cu(II). The reactivity to dioxygen of the reduced complexes has been studied at low temperature starting from the carbonyl adducts of the Fe(II) complex, 3, and Fe(II)/Cu(I) complex, 4. Also in this case the adducts derived from the Fe(II) and Fe(II)/Cu(I) complexes, that we formulate as Fe(III)-superoxo and Fe(III)/Cu(II)-peroxo exhibit slightly different spectral properties, showing that the copper center participates in a weak interaction with the dioxygen moiety.     

Complex formation of thiocyanate ions with iron(III) on the solid phase of fibrous ion exchangers

Characteristics of complex formation of SCN^–-ions with iron(III) on fibrous materials filled with an AV-17 anion exchanger (PANV–AV-17) and a KU-2 cation exchanger (PANV–KU-2) are studied by diffuse reflection spectroscopy. Sorption conditions of thiocyanate ions on PANV–AV-17 in the dynamic mode and the influence of concentrations of Cl^–, SO ₄ ^2- and NO ₃ ^- on the sorption and analytical signals of thiocyanate complexes are studied. Sorption conditions of iron(III) on PANV–KU-2 and the conditions of formation of thiocyanate complexes are studied. Systems for the sorption–spectroscopic determination of 0.1–0.7 μg/mL of SCN^–-ions in aqueous solutions of pH 5 ± 1 on PANV–AV-17 and test-determination of 5–30 μg of SCN^–-ions on PANV–KU-2 are proposed.     

Dynamics of Copper(II), Nickel(II), and Iron(III) Ion Exchange

The degree of utilization of the static exchange capacity of KU-2×8×12 cation exchanger with respect to copper(II), nickel(II), and iron(III) cations was considered as a function of the solution flow velocity through the column cross section.