有序介孔三氧化二铟/还原氧化石墨烯纳米复合材料的制备及可见光催化性能

以有序介孔三氧化二铟(m-In2O3)和还原氧化石墨烯(RGO)为原料,采用紫外光照射法合成了介孔三氧化二铟/还原氧化石墨烯(m-In2O3-RGO)复合光催化剂.利用N2吸附-脱附、X射线衍射(XRD)、透射电子显微镜(TEM)、漫反射吸收光谱(DRS)和光电流测试等手段对样品进行表征.在可见光照射下,以对氯苯酚(4-CP)为目标污染物,考察了m-In2O3-RGO光催化剂的催化性能.结果表明,m-In2O3-RGO光催化剂具有完整的晶型和规则的孔道结构,有利于光生电子和空穴的分离.同时,作为固态电子受体与传输体的RGO促进了光生电子-空穴对的传输和分离,有效提高了可见光催化性能.掺杂2%(质量分数)RGO的复合光催化剂性能最佳,4 h可将4-CP降解96%以上,催化剂经多次循环使用后,其光催化活性基本保持不变.     

添加NaBF_4对阳极氧化法制备TiO_2纳米管光催化剂的影响

在阳极氧化电解液中添加Na BF4制得了具可见光活性的B掺杂TiO_2纳米管阵列(B/TNTs)。采用扫描电镜(FE-SEM)、能谱仪(EDS)、X射线衍射(XRD)、傅立叶红外光谱(FTIR)、紫外-可见漫反射光谱(UV-Vis DRS)以及X射线光电子能谱(XPS)对样品进行表征,以亚甲基蓝(MB)的光催化降解为目标反应评价其光催化活性。结果表明:添加Na BF4后,TiO_2纳米管表面形貌变化较大;B掺入到TiO_2晶格中形成B-O-Ti键;B掺杂使得TiO_2纳米管表面羟基量增加、光学带隙能减小、光吸收阀值红移,且B掺杂量越多,其相应值的变化量越大;B掺杂能促进TiO_2锐钛矿相的发育,纳米管经550℃煅烧后仍保持未掺杂样品的锐钛矿相结构;Na BF4的最佳添加量为0.6%(w/w)时,所得样品光催化活性最佳,可见光下光催化降解MB的4 h降解率由未添加的39.90%提高至75.15%,且反复使用10次后其光催化性能基本保持不变;总有机碳(TOC)分析结果表明,MB在可见光下能被B/TiO_2有效矿化。     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯(PANI-GO),得到了氮掺杂的还原氧化石墨烯碳材料(N-RGO),以其负载Pt制备了Pt/N-RGO纳米结构电催化剂.采用透射电镜(TEM)、X射线光电子能谱(XPS)、X射线衍射(XRD)谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能.结果表明:高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

TiO_2-HNbMoO_6复合材料的结构特征及其光催化性能

通过插层-柱撑的方法制备了新型的复合材料TiO_2-HNbMoO_6。采用粉末X射线衍射(XRD)、高分辨透射电子显微镜(HRTEM)、激光拉曼光谱(LRS)、X射线光电子能谱(XPS)、紫外-可见漫反射光谱(UV-Vis DRS)及H_2程序升温还原(H_2-TPR)等技术对样品的相结构和它的微结构、骨架特征及光谱响应特性以及分散相粒子与片层间的相互作用进行表征,利用N_2吸附-脱附法对样品的比表面积进行了表征,并通过模拟太阳光降解有机染料亚甲基蓝(MB)溶液考察复合材料的光催化活性。结果表明,HNbMoO_6与TiO_2复合后样品层间距增大,但无TiO_2晶相生成,主体材料中的Nb―O键和客体材料中的Ti―O键复合前后发生明显变化等,证明了TiO_2在HNbMoO_6层间高度分散,并呈现明显的相互作用。复合后样品比表面积是本体材料的4倍有余,禁带宽度变窄,它在吸附和模拟太阳光照射下催化降解MB中的优越的活性都是主客体间明显的协同效应的结果。     

中孔TUD负载的氧化铬掺杂氧化钛光催化降解苯酚（英文）

中孔的TUD-1负载的氧化铬掺杂TiO_2(Cr-TiO_2)有望用于紫外光照射下光催化降解苯酚的催化剂.低角X射线衍射和红外结果证实该样品中TUD-1存在无定形和中孔硅酸盐框架.TUD-1的中孔结构进一步得到N_2吸附-脱附的证实:为IV型等温线,并具有窄的孔径分布(3.9 nm)和高的比表面积(490 m~2/g).透射电镜结果表明,所制样品保持了纳米颗粒和多孔孔道结构.TUD-1中负载Cr-TiO_2后使得带隙能量增加.与未负载的Cr-TiO_2相比,所有TUD-1负载的Cr-TiO_2光催化剂表现出更高的紫外光下降解苯酚的活性.其中Si/Ti摩尔比为30的Cr-TiO_2/TUD-1样品的光催化活性最高(82%).苯酚的光催化降解遵循一级Langmuir吸附等温线.     

氮掺杂还原氧化石墨烯负载铂催化剂的制备及甲醇电氧化性能

采用高温热解聚苯胺修饰的氧化石墨烯（PANI-GO）,得到了氮掺杂的还原氧化石墨烯碳材料（N-RGO）,以其负载Pt 制备了Pt/N-RGO纳米结构电催化剂. 采用透射电镜（TEM）、X射线光电子能谱（XPS）、X 射线衍射（XRD）谱及拉曼光谱等技术对N-RGO和Pt/N-RGO的形貌及结构进行了表征,用循环伏安、计时电流等电化学技术研究了Pt/N-RGO电极催化剂对CO溶出反应和甲醇电氧化反应的催化性能. 结果表明：高温热解PANIGO可同时实现GO的还原及其氮掺杂的过程,氮掺杂引起还原氧化石墨烯碳材料表面缺陷结构和导电性的增加;与相应的未掺杂氮样品Pt/RGO相比较,Pt/N-RGO样品上Pt 颗粒的分散更均匀,显示出更强的抗CO毒化能力和更高的甲醇电氧化催化活性及稳定性.     

微波固相法快速制备氮掺杂石墨烯

以鳞片石墨为原料, 首先通过Hummers法制备氧化石墨, 再将洗涤至中性的氧化石墨分散液与乙二胺反应得到功能化石墨烯。干燥后的功能化石墨烯在微波辐照下能瞬间产生高热, 促使接枝的乙二胺分子分解并实现对石墨烯原位掺杂制备出氮掺杂石墨烯。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)、X射线衍射(XRD)、X射线能谱(EDS)对样品的形貌、结构和组成进行了表征。结果表明:该合成途径能成功实现对氧化石墨烯的还原和掺杂, 所合成的氮掺杂石墨烯呈现透明绢丝状结构。     

微波固相法快速制备氮掺杂石墨烯

以鳞片石墨为原料,首先通过Hummers法制备氧化石墨,再将洗涤至中性的氧化石墨分散液与乙二胺反应得到功能化石墨烯。干燥后的功能化石墨烯在微波辐照下能瞬间产生高热,促使接枝的乙二胺分子分解并实现对石墨烯原位掺杂制备出氮掺杂石墨烯。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)、X射线衍射(XRD)、X射线能谱(EDS)对样品的形貌、结构和组成进行了表征。结果表明:该合成途径能成功实现对氧化石墨烯的还原和掺杂,所合成的氮掺杂石墨烯呈现透明绢丝状结构。     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

聚吡咯/还原氧化石墨烯复合物的合成及电容性能

通过原位聚合方法制备不同配比的聚吡咯/氧化石墨(Ppy/GO)复合物,将其用NaBH4还原得到聚吡咯/还原氧化石墨烯(Ppy/RGO)复合物,采用X射线衍射、红外光谱和场发射扫描电子显微镜(FESEM)对其结构和形貌进行物理表征.采用循环伏安、恒电流充放电和交流阻抗等电化学方法系统研究了所制备样品的电化学性能.实验结果表明,在电流密度为0.5A/g、吡咯(Py)与GO质量比为95∶5时,得到的复合物还原前后比电容分别可达401.5和314.5F/g,远高于单纯的GO(34.8F/g)和Ppy(267.5F/g).经过1200圈循环稳定性测试后,Ppy/RGO复合物比电容保持了原来的62.5％,与Ppy和Ppy/GO(电容保持率分别为16.8％和46.4％)相比,Ppy/RGO表现出更好的循环稳定性能,有望成为超级电容器电极材料.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.