Electronic Structure and Interface Properties of a Model Molecule for Organic Solar Cells

We study the electronic structure of 4,7‐bis(5‐methylthiophen‐2‐yl)benzo[c][1,2,5]thiadiazole (MTBT) and its interface properties with gold using X‐ray photoemission spectroscopy (XPS), valence‐band ultraviolet photoemission spectroscopy (UPS), X‐ray absorption spectroscopy (XAS), as well as resonant photoemission (ResPES). MTBT can be regarded as a model molecule for PCPDTBT, a promising candidate for efficient bulk heterojunction solar cells. Almost no contribution of sulfur and only a weak contribution of nitrogen to the HOMO level is found. At the interface with gold, a strong chemical interaction between the sulfur of the benzothiadiazole and gold occurs, which may have consequences for interface properties in devices.     

Comparative thickness measurements of SiO2/Si films for thicknesses less than 10 nm

We report on a comparative measurement of SiO₂/Si dielectric film thickness (t < 10 nm) using grazing‐incidence x‐ray photoelectron spectroscopy, neutron reflectometry and spectroscopic ellipsometry. Samples with nominal thicknesses of 3–7 nm were characterized by XPS with grazing‐incidence x‐rays at 1.8 keV, by cold neutron reflectometry (λ = 0.475 nm) and by spectroscopic ellipsometry over 1.5 eV < E < 6.0 eV. The results show good agreement between the ellipsometry and grazing‐incidence XPS, with slightly lower values for the neutron reflectometry. The role of surface contamination in each type of measurement is discussed. Published in 2004 by John Wiley & Sons, Ltd.     

Single‐breath analysis using a novel simple sampler and capillary electrophoresis with contactless conductometric detection

The analysis of ionic content of exhaled breath condensate (EBC) from one single breath by CE with C⁴D is demonstrated for the first time. A miniature sampler made from a 2‐mL syringe and an aluminum cooling cylinder for collection of EBC was developed. Various parameters of the sampler that influence its collection efficiency, repeatability, and effect of respiratory patterns were studied in detail. Efficient procedures for the cleanup of the miniature sampler were also developed and resulted in significant improvement of sampling repeatability. Analysis of EBC was performed by CE‐C⁴D in a 60 mM MES/l ‐histidine BGE with 30 μM CTAB and 2 mM 18‐crown‐6 at pH 6 and excellent repeatability of migration times (RSD < 1.3% (n = 7)) and peak areas (RSD < 7% (n = 7)) of 12 inorganic anions, cations, and organic acids was obtained. It has been shown that the breathing pattern has a significant impact on the concentration of the analytes in the collected EBC. As the ventilatory pattern can be easily controlled during single exhalation, the developed collection system and method provides a highly reproducible and fast way of collecting EBC with applicability in point‐of‐care diagnostics.     

An X‐ray absorption spectroscopic study of carbon monoxide‐adsorbed Cu surface

Adsorption/interaction of Carbon monoxide (CO) on a catalytic surface is the key step in electrochemical conversion of CO2 for environmental consideration. Copper (Cu) is known to be the most efficient catalyst for this purpose. Thus, this paper investigates effects of CO adsorption on the electronic/atomic state of polycrystalline Cu surface by using x‐ray absorption spectroscopy (XAS). X‐ray absorption near‐edge structure (XANES) tells that the Cu K‐edge shift +0.2 eV on adsorbing CO. Extended x‐ray absorption fine structure (EXAFS) analysis informs that CO adsorption disturbs Cu surface, i.e. increase of Cu‐Cu bonding distance and decrease of the coordination number of the first nearest neighbor. Both the results of XANES and EXAFS imply decrease of d‐electron density of Cu on the adsorption. Demonstrated is that XAS is very useful in studying the surface phenomena of a catalyst but requires further efforts. Copyright © 2014 John Wiley & Sons, Ltd.     

Vacuum‐UV Irradiation‐Based Formation of Methyl‐Si‐O‐Si Networks from Poly(1,1‐Dimethylsilazane‐co‐1‐methylsilazane)

The vacuum‐UV (VUV)‐induced conversion of commercially available poly(1,1‐dimethylsilazane‐co‐1‐methylsilazane) into methyl‐Si‐O‐Si networks was studied using UV sources at wavelengths around 172, 185, and 222 nm, respectively. Time‐of‐flight secondary ion mass spectroscopy (TOF‐SIMS), X‐ray photo electron spectroscopy (XPS), and Fourier transform infrared (FTIR) measurements, as well as kinetic investigations, were carried out to elucidate the degradation process. First‐order kinetics were found for the photolytically induced decomposition of the Si? NH‐Si network, the subsequent formation of the methyl‐Si‐O‐Si network and the concomitant degradation of the Si? CH₃ bond, which were additionally independent of the photon energy above a threshold of about 5.5 eV (225 nm). The kinetics of these processes were, however, dependent on the dose actually absorbed by the layer and, in the case of Si‐O‐Si formation, additionally on the oxygen concentration. The release of ammonia and methane accompanied the conversion process. Quantum‐chemical calculations on methyl substituted cyclotetrasilazanes as model compounds substantiate the suggested reaction scheme. Layers <100 nm in thickness based on mixtures of poly(1,1‐dimethylsilazane‐co‐1‐methylsilazane) and perhydropolysilazane (PHPS) were coated onto polyethylene terephthalate (PET) foils by a continuous roll to roll process and cured by VUV irradiation by using wavelengths <200 nm and investigated for their O₂ and water vapor‐barrier properties. It was found that the resulting layers displayed oxygen and water vapor transmission rates (OTR and WVTR, respectively) of <1 cm³ m^?2 d^?1 bar^?1 and <4 g m^?2 d^?1, respectively.     

First‐Principles Study of Na‐Ion Battery Performance and Reaction Mechanism of Tin Sulfide as Negative Electrode

We study the Na‐ion battery characteristics of SnS as a negative electrode by first‐principles calculations. From energy analyses, we clarify the discharge reaction process of the Na/SnS half‐cell system. We show a phase diagram of Na?Sn?S ternary systems by constructing convex‐hull curves, and show a possible reaction route considering intermediate products in discharge reactions. Voltage‐capacity curves are calculated based on the Na?SnS reaction path that is obtained from the ternary phase diagram. It is found that the conversion reactions and subsequently the alloying reactions proceed in the SnS electrode, contributing to its high capacity compared with the metallic Sn electrode, in which only the alloying reactions progresses stepwise. To verify the calculated reaction process, x‐ray absorption spectra (XAS) are calculated and compared with experimental XAS at S K‐edge, showing meaningful XAS changes associated with Na₂S and SnS in discharged and charged states, respectively.     

Crystal‐Field and Covalency Effects in Uranates: An X‐ray Spectroscopic Study

The electronic structure of U^V‐ and U^VI‐containing uranates NaUO₃ and Pb₃UO₆ was studied by using an advanced technique, namely X‐ray absorption spectroscopy (XAS) in high‐energy‐resolution fluorescence‐detection (HERFD) mode. Due to a significant reduction in core–hole lifetime broadening, the crystal‐field splittings of the 5f shell were probed directly in HERFD‐XAS spectra collected at the U 3d edge, which is not possible by using conventional XAS. In addition, the charge‐transfer satellites that result from U 5f–O 2p hybridization were clearly resolved. The crystal‐field parameters, 5f occupancy, and degree of covalency of the chemical bonding in these uranates were estimated by using the Anderson impurity model by calculating the U 3d HERFD‐XAS, conventional XAS, core‐to‐core (U 4f–3d transitions) resonant inelastic X‐ray scattering (RIXS), and U 4f X‐ray photoelectron spectra. The crystal field was found to be strong in these systems and the 5f occupancy was determined to be 1.32 and 0.84 electrons in the ground state for NaUO₃ and Pb₃UO₆, respectively, which indicates a significant covalent character for these compounds.     

Unprecedented 1,14‐seco‐Crotofolanes from Croton insularis: Oxidative Cleavage of Crotofolin C by a Putative Homo‐Baeyer–Villiger Rearrangement

EBC‐162 isolated from Croton insularis, obtained from the northern rainforest of Australia, was structurally affirmed as crotofolin C ( 4 ). Novel oxidative degradation products, EBC‐233 and EBC‐300, which are the first crotofolane endoperoxides, were also isolated. Both endoperoxides were found to be stable intermediates, which are proposed to undergo an unprecedented homo‐Baeyer–Villiger biosynthetic rearrangement to give a new class of 1,14‐seco‐crotofolane diterpenes. Prolonged storage of all isolates assisted in authenticating their natural product status. Anticancer activities of reported compounds are presented.     

Evolution of the local structure in GaN:O thin films grown by ion‐assisted deposition with film thickness

Optical and optoelectronic properties of gallium nitride strongly depend on the synthesis procedure, which may be related to specific structural characteristics of GaN inherent to each preparation condition. Amorphous and nanocrystalline GaN films have been prepared by ion‐assisted deposition (IAD). The films prepared at 10^?5 Torr for <50 min have shown exploitable optoelectronic properties, in spite of the high concentration of oxygen of these films (up to 25 at.%). We study here the evolution of the local structure around Ga atoms as the deposition time increases. Five IAD GaN films of thickness ranging between 140 and 450 nm on silicon substrates were analysed by x‐ray absorption fine structure (XAFS) at the Ga K‐edge. The first and second shells of neighbouring atoms are clearly identified in the radial distribution functions at approximately 1.9 and 3.2 Å, respectively. In all of the films, Ga seems to be tetrahedrally coordinated to four nitrogen atoms, some of which may be substituted by oxygen. For deposition times <50 min, analysis of both x‐ray adsorption near‐edge structure (XANES) and extended x‐ray adsorption fine structure (EXAFS) regions indicates that the material is highly amorphous. Above this threshold, a peak corresponding to the first coordination sphere of Ga atoms becomes discernible and increases in intensity for longer deposition times, indicating that the second shell of atoms is now more ordered. The pseudo Debye–Waller factor of the Ga shell is used for monitoring the average degree of amorphization in an ～100 nm thick top layer, which seems to be related to the film oxygen content. The XAFS results are compatible with a layered distribution of crystallinity, as has been suggested previously for these films. Copyright © 2005 John Wiley & Sons, Ltd.     

Shape‐controlled synthesis of cerium oxide nanoparticles for efficient dye photodegradation and antibacterial activities

Herein, two‐shaped cerium oxide nanoparticles (NPs), that is, spherical and cubical, were synthesized through hydrothermal approach by tuning reaction temperatures. The morphology and structural and chemical composition of both samples were characterized by transmission electron microscopy (TEM), high‐resolution TEM (HRTEM), X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS), respectively. Both types of NPs were subjected to photodegradation of industrial dye, methylene blue, under dark, sunlight, and UV irradiation, and their recyclability and reusability were also assessed. Besides, the effect of pH, concentration of NPs, and dye on degradability was also analyzed. The cubical‐shaped NPs demonstrated superior degradation of ~70% under UV irradiation than the spherical ones (<50%). The antibacterial activities of both NPs were also examined, and cubical‐shaped NPs were found to exhibit superior antimicrobial potential (zone of inhibition [ZOI]: 25.75 ± 0.25, 18.83 ± 0.76, 15.75 ± 0.66, and 15.75 ± 0.25 mm) in comparison with the spherical ones (ZOI: 19.41 ± 0.94, 14.25 ± 0.66, 12.58 ± 1.01, and 9.91 ± 1.01 nm) for Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, and Staphylococcus aureus respectively with reduced growth and viable count. This difference in performance may be attributed to the higher surface areas of cubical‐shaped NPs and higher content of oxygen vacancies. The results presented in this study suggest that cubical NPs are excellent candidates for treating industrial wastewater with greater reproducibility. Moreover, they can be used as active growth inhibitors against different microorganisms and thus can be extremely useful in developing medical devices and to design various antimicrobial systems.     

Evolution of Oxygen–Metal Electron Transfer and Metal Electronic States During Manganese Oxide Catalyzed Water Oxidation Revealed with In Situ Soft X‐Ray Spectroscopy

Manganese oxide (MnO_x) electrocatalysts are examined herein by in situ soft X‐ray absorption spectroscopy (XAS) and resonant inelastic X‐ray scattering (RIXS) during the oxidation of water buffered by borate (pH 9.2) at potentials from 0.75 to 2.25 V vs. the reversible hydrogen electrode. Correlation of L‐edge XAS data with previous mechanistic studies indicates Mn^IV is the highest oxidation state involved in the catalytic mechanism. MnO_x is transformed into birnessite at 1.45 V and does not undergo further structural phase changes. At potentials beyond this transformation, RIXS spectra show progressive enhancement of charge transfer transitions from oxygen to manganese. Theoretical analysis of these data indicates increased hybridization of the Mn?O orbitals and withdrawal of electron density from the O ligand shell. In situ XAS experiments at the O K‐edge provide complementary evidence for such a transition. This step is crucial for the formation of O₂ from water.     

In situ TREXS Observation of Surface Reduction Reaction of NiO Film with ∼2 nm Surface Sensitivity

X‐ray absorption fine structure (XAFS) spectroscopy is one of the most widely used methods at synchrotron radiation facilities. XAFS gives us information on chemical states and local structures. Fundamentally, XAFS is bulk sensitive, not surface sensitive. If a surface sensitive XAFS method was available, surface chemical reactions can be observed under realistic conditions. Here, we report the development and present status of a type of surface sensitive x‐ray spectroscopy, which is named total reflection x‐ray spectroscopy, TREXS.     

Synthesis of conducting polypyrrole by radiolysis polymerization method

Conducting polypyrrole (PPy) has been synthesized by the in situ gamma radiation‐induced chemical oxidative polymerization method. This method takes advantages of the specialties of radiation‐induction, and a highly uniform polymer morphology was obtained. The resultant nanosize polypyrrole particles were characterized by Elemental Analysis, Fourier transform infrared (FT‐IR), scanning electron microscope (SEM), transmission electron microscopy (TEM) and X‐ray Diffraction (XRD). Measurements of polymer particle sizes were obtained at <500 nm. A standard four‐point probe revealed that the chemical synthesis of PPy has a good electrical property. Also thermal stability, checked by Thermal Gravimetric Analysis in air, was ensured by this novel synthesis. Copyright © 2007 John Wiley & Sons, Ltd.     

1H and 13C NMR and X‐ray diffraction data for a diosgenyl N,O‐protected glucopyranoside

The assignments of ¹H and ¹³C NMR chemical shifts together with x‐ray diffraction data for synthesized diosgenyl 3,4,6‐tri‐O‐acetyl‐2‐deoxy‐2‐tetrachlorophthalimido‐β‐D ‐glucopyranoside are described. The structure of this glycoside was established by using homo‐ and heteronuclear two‐dimensional NMR techniques. X‐ray diffraction data for this compound are also reported. Copyright © 2002 John Wiley & Sons, Ltd.     

Magnetic Anisotropy of Cyanide‐Bridged Core and Core–Shell Coordination Nanoparticles Probed by X‐ray Magnetic Circular Dichroism

The local symmetry and local magnetic properties of 6 nm‐sized, bimetallic, cyanide‐bridged CsNiCr(CN)₆ coordination nanoparticles 1 and 8 nm‐sized, trimetallic, CsNiCr(CN)₆@CsCoCr(CN)₆ core–shell nanoparticles 2 were studied by X‐ray absorption spectroscopy (XAS) and X‐ray magnetic circular dichroism (XMCD). The measurements were performed at the Ni^II, Co^II, and Cr^III L_2,3 edges. This study revealed the presence of distorted Ni^II sites located on the particle surface of 1 that account for the uniaxial magnetic anisotropy observed by SQUID measurements. For the core–shell particles, a combination of the exchange anisotropy between the core and the shell and the pronounced anisotropy of the Co^II ions is the origin of the large increase in coercive field from 120 to 890 Oe on going from 1 to 2 . In addition, XMCD allows the relative orientation of the magnetic moments throughout the core–shell particles to be determined. While for the bimetallic particles of 1 , alignment of the magnetic moments of Cr^III ions with those of Ni^II ions leads to uniform magnetization, in the core–shell particles 2 the magnetic moments of the isotropic Cr^III follow those of Co^II ions in the shell and those of Ni^II ions in the core, and this leads to nonuniform magnetization in the whole nanoobject, mainly due to the large difference in local anisotropy between the Co^II ions belonging to the surface and the Ni^II ions in the core.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Chemical Dealloying Mechanism of Bimetallic Pt–Co Nanoparticles and Enhancement of Catalytic Activity toward Oxygen Reduction

The chemical dealloying mechanism of bimetallic Pt–Co nanoparticles (NPs) and enhancement of their electrocatalytic activity towards the oxygen reduction reaction (ORR) have been investigated on a fundamental level by the combination of X‐ray absorption spectroscopy (XAS) and aberration‐corrected scanning transmission electron microscopy (STEM). Structural parameters, such as coordination numbers, alloy extent, and the unfilled d states of Pt atoms, are derived from the XAS spectra, together with the compositional variation analyzed by line‐scanning energy‐dispersive X‐ray spectroscopy (EDX) on an atomic scale, to gain new insights into the dealloying process of bimetallic Pt–Co NPs. The XAS results on acid‐treated Pt–Co/C NPs reveal that the Co–Co bonding in the bimetallic NPs dissolves first and the remaining morphology gradually transforms to a Pt‐skin structure. From cyclic voltammetry and mass activity measurements, Pt–Co alloy NPs with a Pt‐skin structure significantly enhance the catalytic performance towards the ORR. Further, it is observed that such an imperfect Pt‐skin surface feature will collapse due to the penetration of electrolyte into layers underneath and cause further dissolution of Co and the loss of Pt. The electrocatalytic activity decreases accordingly, if the dealloying process lasts for 4 h. The findings not only demonstrate the importance of appropriate treatment of bimetallic catalysts, but also can be referred to other Pt bimetallic alloys with transition metals.     

Nickel Poisoning of a Cracking Catalyst Unravelled by Single‐Particle X‐ray Fluorescence‐Diffraction‐Absorption Tomography

Ni contamination from crude oil in the fluid catalytic cracking (FCC) process is one of the primary sources of catalyst deactivation, thereby promoting dehydrogenation–hydrogenation and speeding up coke growth. Herein, single‐particle X‐ray fluorescence, diffraction and absorption (μXRF‐μXRD‐μXAS) tomography is used in combination with confocal fluorescence microscopy (CFM) after thiophene staining to spatially resolve Ni interaction with catalyst components and study zeolite degradation, including the processes of dealumination and Brønsted acid sites distribution changes. The comparison between a Ni‐lean particle, exposed to hydrotreated feedstock, and a Ni‐rich one, exposed to non‐hydrotreated feedstock, reveals a preferential interaction of Ni, found in co‐localization with Fe, with the γ‐Al₂O₃ matrix, leading to the formation of spinel‐type hotspots. Although both particles show similar surface zeolite degradation, the Ni‐rich particle displays higher dealumination and a clear Brønsted acidity drop.     

CuxCo1−xO Nanoparticles on Graphene Oxide as A Synergistic Catalyst for High‐Efficiency Hydrolysis of Ammonia–Borane

Ammonia–borane (AB) is an excellent material for chemical storage of hydrogen. However, the practical utilization of AB for production of hydrogen is hindered by the need of expensive noble metal‐based catalysts. Here, we report Cu_xCo_1?xO nanoparticles (NPs) facilely deposited on graphene oxide (GO) as a low‐cost and high‐performance catalyst for the hydrolysis of AB. This hybrid catalyst exhibits an initial total turnover frequency (TOF) value of 70.0 (H₂) mol/(Cat‐metal) mol?min, which is the highest TOF ever reported for noble metal‐free catalysts, and a good stability keeping 94 % activity after 5 cycles. Synchrotron radiation‐based X‐ray absorption spectroscopy (XAS) investigations suggested that the high catalytic performance could be attributed to the interfacial interaction between Cu_xCo_1?xO NPs and GO. Moreover, the catalytic hydrolysis mechanism was studied by in situ XAS experiments for the first time, which reveal a significant water adsorption on the catalyst and clearly confirm the interaction between AB and the catalyst during hydrolysis.