Stimuli‐Responsive Polypeptide‐Based Supramolecular Hydrogels Mediated by Ca2+ Ion Cross‐Linking

Hydrogels cross‐linked with metal ions (e.g., Ca²⁺) represent a promising class of bioinspired materials for a wide range of biomedical applications. Herein, we report a facile approach to obtain cross‐linked stimuli‐responsive supramolecular polypeptide hydrogels. The hydrogel is prepared by statistical/block copoly(L‐glutamate)s based copolymers cross‐linked with calcium ions. The incorporation of both oligo(ethylene glycol) (OEG) and glutamic acid residues in the polymer offers thermal‐responsive property and cooperative binding sites with Ca²⁺ ions simultaneously. We present a systematic study of the influence of calcium ions on the gelation behaviors of these copolymers. It is observed that the addition of calcium ions induces the formation of hydrogels. Increasing the concentration of Ca²⁺ ions can significantly enhance the gelation ability of the samples as indicated by increased storage modulus and decreased sol‐to‐gel transition temperature (T_sol‐gel). We further demonstrate that the influence of monomer distribution on the gelation behavior is trivial, which is possibly due to similar morphology of the self‐assemblies. The obtained hydrogels exhibit thermal‐responsive gelation behavior mediated by ion cross‐linking, which enables them to be ideal smart hydrogel system for many applications.     

A method to accelerate the gelation of disulfide-crosslinked hydrogels

A glutathione-disulfide-ended poly(ethylene glycol)(GSSG-PEG-GSSG) was designed. It is a much more efficient accelerator than glutathione disulfide(GSSG) for the gelation of an 8arm-PEG-SH polymer solution, and the gelation time can be tuned from hours to minutes at the physiological p H and temperature. A mechanism was proposed to explain the different behaviors of the GSSG and GSSG-PEG-GSSG gelation systems. Due to the ever-going thiol-disulfide exchange reaction, the thiol-disulfide hydrogels also showed interesting swelling behavior.     

Controlling the gelation temperature of biomimetic polyisocyanides

The gelation temperature and mechanical properties of aqueous ethylene glycol-decorated polyisocyanide solutions strongly depends on the length of the glycol tail. Copolymerisation of monomers with different tail lengths allows for precise engineering of the gel properties.     

Preparation and characterization of hydrogels based on acryloyl end-capped four-arm star-shaped poly(ethylene glycol)-branched-oligo(<Emphasis Type="SmallCaps">l</Emphasis>-lactide) via Michael-type addition reaction

An acryloyl end-capped four-arm star-shaped poly(ethylene glycol)-branched-oligo(l-lactide) (4A-PEG-PLA) macromer was firstly prepared. A novel kind of hydrogels was synthesized via the Michael-type addition reaction between (2S,3S)-1,4-bis-sulfanylbutane-2,3-diol (dithiothreitol) and this macromer. Gelation time was determined visually as the time when the precursor solution did not flow on inverting the vials. Hydrogel structure was characterized by FTIR analysis, swelling and degradation tests. It was found that colorless and transparent hydrogels were quickly generated in situ. The gelation time, swelling and degradation behaviors of this kind of hydrogels could be adjusted by changing the concentration of the macromer solution in PBS buffer (pH 7.4). This novel hydrogel is expected to be used as a biomedical material.     

Tunable supramolecular hydrogel for in situ encapsulation and sustained release of bioactive lysozyme

To develop new matrices for the entrapment and sustained release of bioactive lysozyme, a series of supramolecular hydrogels based on α-cyclodextrin (α-CD) and water-soluble poly(ε-caprolactone)-poly(ethylene glycol) block copolymer (PCL-b-PEG) were prepared in the presence of chicken egg lysozyme. Different from commonly used polymeric microspheres and chemically crosslinked hydrogels for lysozyme encapsulation, such hydrogel matrices could be formed under mild conditions without high temperature and the use of chemical emulsifiers or crosslinkers. Their gelation rate, mechanical strength and shear viscosity as well as the release behavior for the encapsulated lysozyme could be tuned easily by the change of α-CD or PCL-b-PEG amount. For the encapsulated lysozyme, its conformation and biological activity could be well maintained when compared to native lysozyme. For the resultant supramolecular hydrogels, they were also confirmed to have a good biocompatibility by MTT assay using mice skin fibroblast (L929).     

Dual‐responsive supramolecular inclusion complexes of block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] with α‐cyclodextrin

A new class of temperature and pH dual‐responsive and injectable supramolecular hydrogel was developed, which was formed from block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] (PEG‐b‐PDMAEMA) and α‐cyclodextrin (α‐CD) inclusion complexes (ICs). The PEG‐b‐PDMAEMA diblock copolymers with different ratio of ethylene glycol (EG) to (2‐dimethylamino)ethyl methacrylate (DMAEMA) (102:46 and 102:96, respectively) were prepared by atom transfer radical polymerization (ATRP). ¹H NMR measurement indicated that the ratio of EG unit to α‐CD in the resulted ICs was higher than 2:1. Thermal analysis showed that thermal stability of ICs was improved. The rheology studies showed that the hydrogels were temperature and pH sensitive. Moreover, the hydrogels were thixotropic and reversible. The self‐assembly morphologies of the ICs in different pH and ionic strength environment were studied by transmission electron microscopy. The formed biocompatible micelles have potential applications as biomedical and stimulus‐responsive material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2143–2153, 2010     

聚乙二醇-聚乳酸共聚物药物载体*

本文综述了聚乙二醇与聚乳酸共聚亲水改性的最新进展, 包括嵌段和星型结构聚乙二醇-聚乳酸共聚物(PEG-PLA)及其端基化衍生物的合成。同时概述了该共聚物以胶束、微粒、水凝胶和囊泡形式担载亲水、疏水及蛋白质类药物的应用,特别介绍了静电纺丝制备的PEG-PLA超细纤维载体及其释药特性。     

Thermo-Responsive Hydrogels Based on Branched Poly(L-lactide)-poly(ethylene glycol) Copolymers

Summary: Branched poly(L -lactide)-poly(ethylene glycol) (PLLA-PEG) block copolymers were synthesized from trifunctional PLLA and amine functionalized methoxy poly(ethylene glycol)s. The copolymers in water formed hydrogels that showed thermo-responsive behavior. The hydrogels underwent a gel to sol transition with increasing temperature as determined with the vial tilting method and oscillatory rheology. For all copolymers, the transition temperature increased with increasing copolymer concentration. The transition temperature of corresponding branched copolymers also increased with increasing PEG molecular weight, and surprisingly decreased with increasing molecular weight of the PLLA branches. In general, the gel-sol transition is explained by disruption of micellar or aggregate interactions because of partial dehydration and shrinkage of the PEG chains. An increase in the molecular weight of the PLLA branches led to the formation of micelles and aggregates as observed with DLS at low concentrations. It is speculated that the non-uniform size distribution and possible crystallization of longer PLLA blocks may have a negative effect on the formation of micellar packing upon gelation, allowing the disruption of micellar or aggregate interactions to occur at lower temperatures. The transition temperature of the gels could be tuned closely to body temperature by varying the concentration of the solution or the molecular weight of the PEG block and the PLLA blocks, which implies that these polymers may be used as injectable systems for in-situ gel formation.     

Gelation Kinetics and Mechanical Properties of Thiol-Tetrazole Methylsulfone Hydrogels Designed for Cell Encapsulation

Hydrogel precursors that crosslink within minutes are essential for the development of cell encapsulation matrices and their implementation in automated systems. Such timescales allow sufficient mixing of cells and hydrogel precursors under low shear forces and the achievement of homogeneous networks and cell distributions in the 3D cell culture. The previous work showed that the thiol-tetrazole methylsulfone (TzMS) reaction crosslinks star-poly(ethylene glycol) (PEG) hydrogels within minutes at around physiological pH and can be accelerated or slowed down with small pH changes. The resulting hydrogels are cytocompatible and stable in cell culture conditions. Here, the gelation kinetics and mechanical properties of PEG-based hydrogels formed by thiol-TzMS crosslinking as a function of buffer, crosslinker structure and degree of TzMS functionality are reported. Crosslinkers of different architecture, length and chemical nature (PEG versus peptide) are tested, and degree of TzMS functionality is modified by inclusion of RGD cell-adhesive ligand, all at concentration ranges typically used in cell culture. These studies corroborate that thiol/PEG-4TzMS hydrogels show gelation times and stiffnesses that are suitable for 3D cell encapsulation and tunable through changes in hydrogel composition. The results of this study guide formulation of encapsulating hydrogels for manual and automated 3D cell culture.     

Poly(N-isopropylacrylamide-co-N-t-butylacrylamide)-block-poly(ethylene glycol)-block-poly(N-isopropylacrylamide-co-N-t-butylacrylamide) triblock copolymers: synthesis and thermogelation properties of aqueous solutions

Novel triblock copolymers with PEG middle blocks of 1–10 kDa and poly(N-isopropylacrylamide-co-t-butylacrylamide) statistical copolymer side arms with DP_n?≈?88 and different compositions, were synthesized by SET-LRP. The thermogelation properties of their aqueous solutions depended on both hydrophobic monomer content of the side blocks and molecular weight (MW) of the poly(ethylene glycol) (PEG) middle block, as proven by dynamic rheometry, DSC, and tube inversion method measurements. At constant PEG chain length, increasing TBAM proportions led to a gelation process occurring at progressively lower temperatures, as well as to a lower stability of the forming hydrogels in the case of shorter-PEG-chain block copolymers. By employing longer PEG blocks (M_PEG ≥6,000 Da), stable hydrogels with the gelation temperature below 37 °C could be obtained. For a constant composition of the copolyacrylamide blocks, the dependence of the phase transition temperature (T_ph) on M_PEG displayed a different shape at different polymer solution concentrations, because of the stronger variation of T_ph with polymer concentration as M_PEG increased. Also, the viscoelastic properties of the hydrogels resulting from 20 wt.% polymer aqueous solutions at 37 °C were stronger affected by the MW of the PEG middle block than by the hydrophobic character of the thermosensitive side blocks.     

Designing of pH-responsive ketorolac tromethamine loaded hydrogels of alginic acid: Characterization,in-vitro and in-vivo evaluation

pH-responsive hydrogels based on alginic acid grafted with acrylic acid and ethylene glycol dimethylacrylate in the presence of ammonium persulfate were developed for controlled delivery of Ketorolac tromethamine. The alginic acid based hydrogels were prepared by free radical polymerization technique. Increase in gel fraction was observed with the increase in alginic acid, acrylic acid, and ethylene glycol dimethylacrylate content. The dynamic swelling and drug release studies were conducted at two different pH values (pH 1.2 and 7.4). Maximum swelling and drug release were observed at pH 7.4. The characterization of prepared hydrogels was carried out by using Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, powder x-ray diffraction, and scanning electron microscopy. Similarly, in-vivo study was performed on rabbits and greater plasma drug concentration was achieved by fabricated hydrogels as compared to drug solution and commercial product Keten. Conclusively, the fabricated hydrogels can be considered as a potential candidate for controlled delivery of Ketorolac tromethamine.     

Chitosan‐Based Thermo/pH Double Sensitive Hydrogel for Controlled Drug Delivery

A series of thermo/pH sensitive N‐succinyl hydroxybutyl chitosan (NSHBC) hydrogels with different substitution degrees of succinyl are prepared for drug delivery. Rheology analysis shows that the gelation temperature of NSHBC hydrogels is 3.8 °C higher than that of hydroxybutyl chitosan (HBC) hydrogels. A model drug bovine serum albumin (BSA) is successfully loaded and released. NSHBC hydrogels show excellent pH sensitivity drug release behaviors. After incubation for 24 h, 93.7% of BSA is released from NSHBC hydrogels in phosphate buffer saline (PBS) (pH 7.4), which is significantly greater than that of 24.6% at pH 3.0. In contrast, the release rate of BSA from HBC is about 70.0% at pH 3.0 and 7.4. Thus, these novel hydrogels have the prominent merits of high adaptability to soluble drugs and pH sensitivity triggered release, indicating that NSHBC hydrogels have promising applications in oral drug delivery.     

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].     

Supramolecular micellization and pH‐inducible gelation of a hydrophilic block copolymer by block‐specific threading of α‐cyclodextrin

A poly(ethylene glycol)‐b‐poly(L ‐lysine) diblock copolymer (PEG‐b‐PLL) was synthesized. Micellization of this hydrophilic copolymer due to the block‐specific threading of α‐cyclodextrin (α‐CD) molecules onto the polyethylene glycol (PEG) block yielded supramolecular‐structured nanoparticles, which undergoes pH‐inducible gelation in aqueous media. The pH‐inducible gelation of supramolecular micelle in water appeared to be completely reversible upon pH changes. The synergetic effect of selective complexation between PEG block and α‐CD and the pH‐inducible hydrophobic interaction between PLL blocks at pH 10 was believed to be the driving force for the formation of the supramolecular hydrogel. ¹H NMR and wide angle X‐ray diffraction (WAXD) were employed to confirm the inclusion complexation between α‐CD and PEG block. Meanwhile, the morphology of the micellized nanoparticles was investigated by transmission electron microscopy (TEM). The thermal stability of inclusion complexes (ICs) was investigated and the rheologic experiment was conducted to reveal the micelle‐gel transition. Such pH‐induced reversible micelle‐gel transition of the supramolecular aggregates may find applications in several fields, for example as advanced biomedical material possessing stimulus‐responsiveness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 782–790, 2008     

Ionizable hydrogels of new type based on poly(ethylene glycol) phosphates

Partly charged poly(ethylene oxide) networks have been prepared by the cure reaction of multifunctional poly(ethylene glycol) phosphate precursors with the diglycidyl ether of triethylene glycol as a crosslinking agent. These new hydrogels display all the features of swelling behaviour characteristics of polyelectrolyte networks. The degree of volume swelling of the hydrogels varies from 16–95 (in distilled water) to 11–45 (in 0.1 M sodium chloride solution) and 7–20 ml/ml (in 0.52 M potassium sulfate as a Θ-solvent). Average chain length, ionic group content, and structure of gels are evaluated from the swelling data.The gelation point occurs at much higher crosslinking ratios and overall P-OH groups conversion than those predicted from the precursor functionality. The role of possible side reactions and some kinetic reasons for the ‘delayed’ gelation are discussed.     

A pH‐sensitive,strong double‐network hydrogel: Poly(ethylene glycol) methyl ether methacrylates–poly(acrylic acid)

We here describe new double network (DN) hydrogels with excellent mechanical strength and high sensitivity to pH changes. The first polymer network has a bottle brush structure and is formed from oligo‐monomers of poly(ethylene glycol) methyl ether methacrylate (PEGMA). Poly(acrylic acid) (PAA) is used as the second network. This double network features strong intermolecular interactions between the neutral poly(ethylene glycol) (PEG) side chains of PPEGMA and the non‐ionized carboxylic acid groups of the PAA second network. When immersed in solutions with a pH below ～4 the DN hydrogels have a low swelling ratio and are opaque as a result of solvent‐polymer phase separation driven by the formation of dense hydrogen‐bonded clusters. The compression strength (～8 MPa) is at least 14 times higher than the analogous single networks. When immersed in solutions with a pH >4, the hydrogels are transparent and exhibit a high swelling ratio with a compression strength of ～1 MPa. The PEG side chain length can be readily controlled without greatly altering the overall DN topology by choosing PEGMA monomers having different PEG side chain lengths. Longer PEG side branches give higher compression and tensile strengths at pH <4 when hydrogen bonded clusters form. The robust nature of these DN gels over a wide pH range may be useful for applications such as artificial muscles and controlled release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Rheology and Drug Release Properties of Bioresorbable Hydrogels Prepared from Polylactide/Poly(ethylene glycol) Block Copolymers

Ring-opening polymerization of L(D)-lactide was realized in the presence of poly(ethylene glycol) (PEG), yielding PLLA/PEG and PDLA/PEG block copolymers. Bioresorbable hydrogels were prepared from aqueous solutions containing both copolymers due to interactions and stereocomplexation between PLLA and PDLA blocks. The rheological properties of the hydrogels were investigated under various conditions by changing copolymer concentration, temperature, time and frequency. The hydrogels constitute a dynamic and evolutive system because of continuous formation/destruction of crosslinks and degradation. Drug release studies were performed on hydrogel systems containing bovine serum albumin (BSA). The release profiles appear almost constant with little burst effect. The release rate depends not only on gelation conditions such as time and temperature, but also on factors such as drug load, as well as molar mass and concentration of the copolymers.     

Injectable hydrogels as unique biomedical materials

A concentrated fish soup could be gelled in the winter and re-solled upon heating. In contrast, some synthetic copolymers exhibit an inverse sol-gel transition with spontaneous physical gelation upon heating instead of cooling. If the transition in water takes place below the body temperature and the chemicals are biocompatible and biodegradable, such gelling behavior makes the associated physical gels injectable biomaterials with unique applications in drug delivery and tissue engineering etc. Various therapeutic agents or cells can be entrapped in situ and form a depot merely by a syringe injection of their aqueous solutions at target sites with minimal invasiveness and pain. This tutorial review summarizes and comments on this soft matter, especially thermogelling poly(ethylene glycol)-(biodegradable polyester) block copolymers. The main types of injectable hydrogels are also briefly introduced, including both physical gels and chemical gels.     

FT‐IR characterization and hydrolysis of PLA‐PEG‐PLA based copolyester hydrogels with short PLA segments and a cytocompatibility study

A series of the biodegradable copolyester hydrogels was prepared using a redox‐initiated polymerization with a constant 1:9 mole ratio of the Boltorn‐based acrylate and diacrylate triblock comacromonomers. The Boltorn® macromonomer was derived from the hyperbranched polyester Boltorn H20, which was functionalized at each terminus with poly(ethylene glycol) acrylate, and the diacrylate triblock macromonomer was poly (lactide‐b‐ethylene glycol‐b‐lactide) diacrylate. The hydrolysis of the copolyesters at pH 7.4 in a phosphate buffered saline solution at 37 °C was studied using ATR‐FTIR spectroscopy. It was found that the presence of the Boltorn, the PEG, and lactide block lengths both play vital roles in determining the structure‐property relationships in these materials. The ATR‐FTIR studies showed that with increasing lactide segment length, the rate of ester hydrolysis increased due to the increased concentration of the hydrolytically sensitive poly(lactic acid) (PLA) ester groups in the network. However, incorporation of Boltorn into the PLA‐PEG‐PLA copolymer did not significantly change the kinetic rate constant for hydrolysis of the PLA segments. The cytocompatibility of a typical one of these materials in the presence of its degradation by‐products was assessed using cultured osteoblasts from the rat. The hydrogel was degraded for 28 days and found to be cytocompatible with osteoblasts over days 23 to 28 of the hydrolysis period. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5163–5176     

Hybrid Vesicles Enable Mechano-Responsive Hydrogel Degradation

Stimuli-responsive hydrogels are intriguing biomimetic materials. Previous efforts to develop mechano-responsive hydrogels have mostly relied on chemical modifications of the hydrogel structures. Here, we present a simple, generalizable strategy that confers mechano-responsive behavior on hydrogels. Our approach involves embedding hybrid vesicles, composed of phospholipids and amphiphilic block copolymers, within the hydrogel matrix to act as signal transducers. Under mechanical stress, these vesicles undergo deformation and rupture, releasing encapsulated compounds that can control the hydrogel network. To demonstrate this concept, we embedded vesicles containing ethylene glycol tetraacetic acid (EGTA), a calcium chelator, into a calcium-crosslinked alginate hydrogel. When compressed, the released EGTA sequesters calcium ions and degrades the hydrogel. This study provides a novel method for engineering mechano-responsive hydrogels that may be useful in various biomedical applications.