Sorption of dyes on cellulose II: effect of alkali treatment of fibre and dye structure

Cellulose is a linear 1,4-β-glucan polymer where the units are able to form highly ordered structures, as a result of extensive interaction through intra- and intermolecular hydrogen bonding of the three hydroxyl groups in each cellulose unit. Alkali has a substantial influence on morphological, molecular and supramolecular properties of cellulose II polymer fibres causing changes in crystallinity. Lyocell fibres pre-treated with 0.0, 2.0, and 4.0 mol dm⁻³ aqueous NaOH solution were dyed with hydrolyzed reactive dyes that had different molecular shapes and sizes. Overall exhaustion (q _e), value of K, and −ΔG increased for lyocell samples pre-treated with aqueous NaOH solution in the following order: 2.0 > 4.0 > 0.0 mol dm⁻³ NaOH. The same trends were observed for colour strength (K/S) values of the dyeings. Pre-treatment of lyocell with 2.0 mol dm⁻³ NaOH creates the substrate that achieves the most thermodynamically favourable system for sorption of hydrolyzed reactive dyes, as at this concentration crystallinity decreases (with respect to 0.0 mol dm⁻³ NaOH treated lyocell) to afford higher sorption; however, at higher alkali concentrations the macro-sorbent forms a compacted unit that limits diffusion within the sorbent interior. Molecular size of the sorbate dye has a significant effect on the sorption process: for the largest dye structure the sorption isotherm is most closely correlated to a Langmuir isotherm; as the size of the dye decreases correlation to a Langmuir isotherm is observed, but with good correlation to the Freundlich isotherm; as the size of the dye is decreased further sorption is more typical of a Freundlich isotherm.     

Determination of gallium by adsorptive stripping voltammetry

A procedure for the determination of gallium by differential pulse adsorptive stripping voltammetry (DPADSV), using different complexing agents (ammonium pyrrolidine dithiocarbamate (APDC), pyrocatechol violet (PCV) and diethyldithiocarbamate (DDTC)), has been optimized. The selection of the experimental conditions was made using experimental design methodology. Under these conditions, the calibration was made and the detection limit was determined for each gallium-ligand complex. A robust regression method was applied which allowed the elimination of anomalous points. The detection limit, with α=β=0.05, for gallium-APDC complex was 5.0×10⁻⁸ mol dm⁻³, for gallium-PCV complex was 9.9×10⁻⁹ mol dm⁻³, and the lowest detection limit (1.3×10⁻⁹ mol dm⁻³) was obtained with DDTC. For this reason, DDTC was selected for the determination of the gallium concentration in a certificate sample and in a spiked tap water sample. The linear dynamic range for gallium-APDC complex was from 5.0×10⁻⁸ to 2.7×10⁻⁷ mol dm⁻³, for gallium-PCV complex was from 5.0×10⁻⁹ to 4.8×10⁻⁷ mol dm⁻³, and for gallium-DDTC complex was from 1.0×10⁻⁹ to 2.1×10⁻⁷ mol dm⁻³.     

Linear polyamines as carriers in thiocyanate-selective membrane electrodes

The polyamines, octyl-[2-(2-octylamino-ethylamino)-ethyl]-amine (L¹) and octyl-{2-[2-(2-octylamino-ethylamino)-ethylamino]-ethyl}-amine (L²), have been used as anion ionophores in PVC-based membrane ion-selective electrodes. Different electrodes were prepared containing L¹, or L², and o-nitrophenyl octyl ether (NPOE) or bis(2-ethylhexyl)sebacate (DOS) as plasticizers. The response of the electrodes was tested in two different buffers, HEPES-KOH (pH 7) and MES-KOH (pH 5.6). Electrodes containing L¹ and L² with NPOE (E1 and E2, respectively) showed a Nernstian response for thiocyanate with a good response time. The detection limit, linear range and slope for electrode E1 were 3.8 × 10⁻⁶ mol dm⁻³, 1 × 10⁻⁵ to 1 × 10⁻¹ mol dm⁻³ and −57.2 mV decade⁻¹ at pH 5.6 and 4.47 × 10⁻⁶ mol dm⁻³, 1.95 × 10⁻⁵ to 1 × 10⁻¹ mol dm⁻³ and −58.1 mV decade⁻¹ at pH 7.0. For electrode E2 the detection limit, linear range and slope found were 2.63 × 10⁻⁶ mol dm⁻³, 7.94 × 10⁻⁶ to 1 × 10⁻¹ mol dm⁻³ and −58.5 mV decade⁻¹ at pH 5.6 and 1.23 × 10⁻⁵ mol dm⁻³, 7.95 × 10⁻⁵ to 1 × 10⁻¹ mol dm⁻³ and −46.0 mV decade⁻¹ at pH 7. In contrast, electrodes containing DOS as plasticizers gave only response at pH 5.6 (detection limit, linear range and slope at pH 5.6 were 3.16 × 10⁻⁵ mol dm⁻³, 1 × 10⁻⁴ to 1 × 10⁻¹ mol dm⁻³ and −52.6 mV decade⁻¹). Selectivity coefficients for different anions with respect to thiocyanate were calculated. The electrode E2 at pH 5.6 was also used for the determination of SCN⁻ by potentiometric titrations with Ag⁺ ions with good results. The electrode E2 was also used to determine concentrations of thiocyanate in biological samples.     

Flow-injection chemiluminescence determination of fluoroquinolones by enhancement of weak chemiluminescence from peroxynitrous acid

A flow-injection chemiluminescence (CL) method is described for the determination of fluoroquinolones including ciprofloxacin, norfloxacin and ofloxacin. The method is based on the enhancement by these compounds of the weak CL from peroxynitrous acid. The linear ranges are 1.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹ for ciprofloxacin and norfloxacin, and 3.0×10⁻⁷ to 3.0×10⁻⁵ mol l⁻¹ for ofloxacin, respectively. The detection limits (S/N=3) are 4.5×10⁻⁸ mol l⁻¹ ciprofloxacin, 5.9×10⁻⁸ mol l⁻¹ norfloxacin and 1.1×10⁻⁷ mol l⁻¹ ofloxacin, respectively. The proposed method was applied to the determination of fluoroquinolones in pharmaceutical preparations.     

Determination of trace metals by ICP-OES in plant materials after preconcentration of 1,10-phenanthroline complexes on activated carbon

In this work, 1,10-phenanthroline was used as a complexing agent for the separation and preconcentration of Cd(II), Co(II), Ni(II), Cu(II) and Pb(II) on activated carbon. The metals were adsorbed on activated carbon by two methods: static (1) and dynamic (2). The optimal condition for separation and quantitative preconcentration of metal ions with activated carbon for the proposed methods was for (1) in the static methods in the pH range 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (92.6%), Co(II) (95.6%), Pb(II) (91.0%), and with 3 mol dm⁻³ HNO₃ for Cd(II) (95.4%), Pb(II) (100.2%). The preconcentration factor was 100 with R.S.D. values between 1.0 and 2.9%. For (2), the dynamic method (SPE), the pH range for the quantitative sorption was 7-9. The desorption was found quantitative with 8 mol dm⁻³ HNO₃ for Cd(II) (100.6%), Pb(II) (94.4%), and reasonably high recovery for Co(II) (83%), Cu(II) (88%). The optimum flow rate of metal ions solution for quantitative sorption of metals with 1,10-phenanthroline was 1-2 cm³ min⁻¹ whereas for desorption it was 1 cm³ min⁻¹. The preconcentration factor was 50 for all the ions of the metals with R.S.D. values between 2.9 and 9.8%.The samples of the activated carbon with the adsorbed trace metals can be determined by ICP-OES after mineralization by means of a high-pressure microwave mineralizer. The proposed method provides recovery for Cd (100.8%), Co (97.2%), Cu (94.6%), Ni (99.6%) and Pb (100.0%) with R.S.D. values between 1.2 and 3.2%.The preconcentration procedure showed a linear calibration curve within the concentration range 0.1-1.5 μg cm⁻³. The limits of detection values (defined as “blank + 3s” where s is standard deviation of the blank determination) are 5.8, 70.8, 6.7, 24.6, and 10.8 μg dm⁻³ for Cd(II), Pb(II), Co(II), Ni(II) and Cu(II), respectively, and corresponding limit of quantification (blank + 10s) values were 13.5, 151.3, 20.0, 58.9 and 33.2 μg dm⁻³, respectively.As a result, these simple methods were applied for the determination of the above-mentioned metals in reference materials and in samples of plant material.     

Sulfonylcalix[4]arenetetrasulfonate as pre-column chelating reagent for selective determination of aluminum(III), iron(III), and titanium(IV) by ion-pair reversed-phase high-performance liquid chromatography with spectrophotometric detection

Sulfonylcalix[4]arenetetrasulfonate (SO₂CAS) has been examined as a pre-column chelating reagent for ultratrace determination of metal ions by ion-pair reversed-phase high-performance liquid chromatography with spectrophotometric detection. Metal ions were converted into the SO₂CAS chelates in an acetic buffer solution (pH 4.7). The chelates were injected onto a n-octadecylsilanized silica-type Chromolith™ Performance RP-18e column and were eluted using a methanol (50 wt.%)-water eluent (pH 5.6) containing tetra-n-butylammonium bromide (7.0 mmol kg⁻¹), acetate buffer (5.0 mmol kg⁻¹), and disodium ethylendiamine-N,N,N′,N′-tetraacetate (0.10 mmol kg⁻¹). Under the conditions used, Al(III), Fe(III), and Ti(IV) were selectively detected among 21 kinds of metal ions [Al(III), Ba(II), Be(II), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Hf(IV), In(III), Mg(II), Mn(II), Mo(VI), Ni(II), Pb(II), Ti(IV), V(V), Zn(II), and Zr(IV)]. The detection limits on a 3σ blank basis were 8.8 nmol dm⁻³ (0.24 ng cm⁻³) for Al(III), 7.6 nmol dm⁻³ (0.42 ng cm⁻³) for Fe(III), and 17 nmol dm⁻³ (0.80 ng cm⁻³) for Ti(IV). The practical applicability of the proposed method was checked using river and tap water samples.     

Determination of traces of cobalt in the presence of nioxime and cetyltrimethylammonium bromide by adsorptive stripping voltammetry

A sensitive method of Co(II) determination by adsorptive stripping voltammetry is presented. The method exploits the enhancement of cobalt peak current observed in the system Co(II)-nioxime-cetyltrimethylammonium bromide-piperazine-N,N′-bis(2-ethanesulfonic acid). The calibration plot for an accumulation time of 60 s is linear from 5 × 10⁻¹¹ to 3 × 10⁻⁹ mol L⁻¹. The relative standard deviation is 3.8% for Co(II) determination at concentration 1 × 10⁻⁹ mol L⁻¹. The detection limit is 1.7 × 10⁻¹¹ mol L⁻¹. The validation of the method is performed by the analyses of certified reference materials and comparing the result of Co(II) determination in river water sample by the proposed method with those obtained by ET AAS. The main advantage of this new system is the micro-trace Co(II) determination by adsorptive stripping voltammetry, as compared to those described before, a low concentration of the supporting electrolyte used, and so commercially available reagents without additional purification can be used.     

Interaction of Quillaja bark saponins with food-relevant proteins

The surface activity and aggregation behaviour of two Quillaja bark saponins (QBS) are compared using surface tension, conductometry and light scattering. Despite formally of the same origin (bark of the Quillaja saponaria Molina tree), the two QBS show markedly different ionic characters and critical micelle concentrations (7.7 · 10^− 6 mol·dm^− 3 and 1.2 · 10^− 4 mol·dm^− 3). The new interpretation of the surface tension isotherms for both QBS allowed us to propose an explanation for the previous discrepancy concerning the orientation of the saponin molecules in the adsorbed layer.     

In vitro and in vivo studies of N,N′-bis[2(2-pyridyl)-methyl]pyridine-2,6-dicarboxamide–copper(II) and rheumatoid arthritis

The thermodynamic equilibria of copper(II), zinc(II) and calcium(II) with N,N′-bis[2(2-pyridyl)-methyl]pyridine-2,6-dicarboxamide (L1) have been studied at 25 °C and an ionic strength of 0.15 mol dm⁻³. Spectroscopic studies suggest metal ion complexation promotes deprotonation and coordination of the amide nitrogens resulting in overall tetragonal coordination of Cu²⁺. Blood–plasma modelling predicts that Cu(II) competes effectively against Zn(II) and Ca(II) for L1 in vivo. Octanol–water partition coefficient studies show that Cu(II)–L1 complexes are reasonably lipophilic. However, the CuL1H₋₂ species which predominates at the physiological pH of 7.4 has poor superoxide dismutase activity. Bio-distribution experiments showed activity accumulation and retention in the body of about 50% of the injected dose for the [⁶⁴Cu]Cu(II)–L1 complex after 24 h.     

Development and application of a capillary electrophoresis based method for the assessment of monosaccharide in soil using acid hydrolysis

An efficient methodology for the determination of carbohydrate content in soils, employing acid hydrolysis and subsequent capillary electrophoresis analysis (CE), is here described. Polysaccharides present in soil samples were hydrolyzed, at 100 °C during 4 h, to their monosaccharide form, by addition of 2 mol dm⁻³ trifluoroacetic acid (TFA) directly to soil. The resulting monosaccharides were then quantitatively derivatized with 4-aminobenzoic acid ethyl ester, via reductive amination with sodium cyanoborohydride, and separated by CE, coupled to an UV-vis diode array set at 300 nm. Separation electrolyte consisted of 5.0 × 10⁻² mol dm⁻³ sodium tetraborate buffer (pH 10.2) and 6 × 10⁻³ mol dm⁻³ sodium dodecylsulphate. A 78 cm long capillary with an internal and external diameter of 75 and 375 μm, respectively, was used and separation performed at 16 °C, with an applied voltage of 30 kV. Quantification was undertaken using ribose as the internal standard. As an application example, carbohydrate composition (w/w) of a farmyard manure fertilized soil was found to vary between 0.0045 ± 0.0003% (glucose) and 0.0267 ± 0.0002% (arabinose) of the total soil content. Xylose, rhamnose, mannose, fucose and galactose content were also studied in the present work.     

Gamma radiation induced synthesis of gold nanoparticles in aqueous polyvinyl pyrrolidone solution and its application for hydrogen peroxide estimation

Gold nanoparticles (Au nps) have been synthesized in aqueous solution of polyvinyl pyrrolidone (PVP) by gamma radiolysis from HAuCl₄·3H₂O precursor and in presence of small concentrations of Ag⁺, 2-propanol and acetone. The effect of different experimental parameters, such as concentration of reactant, molecular weight of PVP on nanoparticle formation was studied. TEM image confirmed that spherical Au nps were formed when PVP of molecular weight 360,000 Da was used as capping agent. H₂O₂ is a reactant in the enzyme catalyzed reaction of o-phenylene diamine (o-PDA). The reaction product has a weak absorption in the yellow region of the spectrum. When this product interacts with Au nps, it leads to enhancement of the absorption peak. The nanoparticles synthesized by radiation method were used for estimation of H₂O₂. The absorbance value of this peak at λ_max was observed to change with H₂O₂ concentration, which was monitored for estimation of H₂O₂. The response is linear in the range of 2.5×10⁻⁶ mol dm⁻³ to 2×10⁻⁴ mol dm⁻³ and 1×10⁻⁷ mol dm⁻³ to 3×10⁻⁶ mol dm⁻³ H₂O₂ in two separate sets of experimental parameters with detection limit 1×10⁻⁷ mol dm⁻³.     

Voltammetry and determination of metronidazole at a carbon fiber microdisk electrode

The electrochemistry of metronidazole, 1-(hydroxyethyl)-2-methyl-5-nitroimidazole, was investigated at a carbon fiber microdisk electrode in pH 9 Britton Robinson buffer. Under these conditions, the reduction of metronidazole is controlled by both mass transport to the microdisk and adsorption with an equilibrium constant of 4 × 10³ mol⁻¹ dm³ and a saturation coverage of 0.88 × 10⁻⁸ mol cm⁻². The adsorption and accumulation of metronidazole on the surface of the carbon fiber allows its determination at low concentrations by square wave adsorptive stripping voltammetry. A detection limit for metronidazole of 5 × 10⁻⁷ mol dm⁻³ and a R.S.D. of 3.7% at 1 × 10⁻⁶ mol dm⁻³ (n = 4) were obtained with a two electrode system with no stirring during the accumulation step. Based on this method, a simple procedure for the determination of metronidazole in urine is described which requires no pre-treatment of the sample before analysis.     

Capillary electrophoresis-electrochemiluminescent detection of N,N-dimethyl ethanolamine and its application in impurity profiling and stability investigation of meclophenoxate

Numerous drugs are carboxylic acid derivatives containing amino group, and hydrolysis reaction of these agents often generates toxic amines. Thus, the detection of amine impurity is of great importance in drug quality control of these amino group-containing ester and amide. A capillary electrophoresis method coupled with end-column electrochemiluminescent detection based on tris(2,2′-bipyridyl)ruthenium(II) system was proposed for the analysis of N,N-dimethyl ethanolamine (DMEA, the degradation product of meclophenoxate) in the presence of its precursor. Baseline separation of DMEA and meclophenoxate can be easily achieved under the selected conditions. DMEA can be assayed within 3 min over the concentration range of 5.0 × 10⁻⁸ to 3.0 × 10⁻⁶ mol L⁻¹ with a detection limit of 2.0 × 10⁻⁸ mol L⁻¹ at the signal-to-noise ratio of 3. The relative standard deviations of the signal intensity and the migration time were less than 5.3 and 2.5% for a standard sample containing 1.0 × 10⁻⁷ mol L⁻¹ DMEA (n = 5), respectively. The presented method has been successfully applied for the profiling of DMEA resulting from the hydrolysis of meclophenoxate in commercial formulations. A primary stability investigation of meclophenoxate in aqueous solution was also carried out at different temperatures, and the results showed that the degradation of meclophenoxate accelerated at the higher temperature.     

Optimisation of thermal lens microscopic measurements in a microchip

The thermal lens optical scheme-design was optimised for microscopic measurements in microchannels. The efficient pathlength of the sample, irradiated volume, and the diameter of the thermal lens were estimated. Experimental time curves of development of the thermal lens and periodical oscillations of the signal due to convectional heat transfer are in good agreement with the theoretically expected behaviour. Noise sources (laser noises, instrumental flicker noise, convection, and flow noise) were studied. The possible effect of probe laser power on transient and steady-state thermal lens measurements were estimated. The effect of solvent absorption on the performance characteristics is shown. Under the optimum optical scheme-design, the limits of detection of ferroin and Sunset Yellow FCF at 488.0 nm are 1×10⁻⁸ and 4×10⁻⁹ mol dm⁻³, respectively (corresponding quantities in the detection volume are 3×10⁻²¹ and 1×10⁻²¹ mol). The total linear calibration range is n×10⁻⁸ to n×10⁻⁴ mol dm⁻³, the repeatability R.S.D. for this range is 3-7%. The optimised instrument was also used for the determination of characteristic rate constants of formation and dissociation of ferroin at the level of n × 10⁻⁸ mol dm⁻³. Some analytical applications are discussed.     

Dyeing behaviour of lyocell fabric: effect of NaOH pre-treatment

To understand the effect of alkali pre-treatment on the dyeing of lyocell fabrics, samples are pre-treated with 0.0–7.0 mol dm⁻³ NaOH using a pad-batch process and then dyed with different types of reactive dyes. Exhaustion, fixation, and visual colour strength (K/S values) are measured. It is observed that sodium hydroxide pre-treatment significantly improves the colour yield, exhaustion, and fixation for all dyes used. Highest K/S values are obtained when the fabrics are pre-treated with 2.0–2.5 mol dm⁻³ NaOH. Cross-sectional analysis shows that below this optimum concentration the core fibres in the yarn are not dyed; at optimum concentration all fibres in yarn cross-section are homogeneously dyed. Cross-sectional analysis shows that as the pre-treatment concentration of NaOH increases above 2.5 mol dm⁻³, the fibres change progressively from a circular to angular cross-section, forming a solid unit. The decrease in K/S above the treatment concentration of 2.5 mol dm⁻³, though the %E and %F remains almost constant, is attributed to the distribution of dye over a larger surface area of the outer fibres in the yarn cross section, forcing the K/S at λ_max to decrease. This paper was presented at the 2nd International Cellulose Conference, Tokyo, Japan, 24th October 2007.     

Coordination to copper(II) strongly enhances the in vitro antimicrobial activity of pyridine-derived N(4)-tolyl thiosemicarbazones

Five copper(II) complexes with N(4)-ortho, N(4)-meta and N(4)-para-tolyl thiosemicarbazones derived from 2-formyl and 2-acetylpyridine were obtained and thoroughly characterized. The crystal structure of N(4)-meta-tolyl-2-acetylpyridine thiosemicarbazone (H2Ac4mT) was determined, as well as that of its copper(II) complex [Cu(2Ac4mT)Cl], which contains an anionic ligand and a chloride in the coordination sphere of the metal. The in vitro antimicrobial activities of all thiosemicarbazones and their copper(II) complexes were tested against Salmonella typhimurium and Candida albicans. Upon coordination a substantial decrease in the minimum inhibitory concentration, from 225 to 1478 μmol L⁻¹ for the thiosemicarbazones to 5–30 μmol L⁻¹ for the complexes was observe against the growth of Salmonella typhimurium and from 0.7–26 to 0.3–7 μmol L⁻¹ against the growth of C. albicans, suggesting that complexation to copper(II) could be an interesting strategy of dose reduction.     

Fluorometric determination of fluoride ion by reagent tablets containing 3-hydroxy-2'-sulfoflavone and zirconium(IV) ethylenediamine tetraacetate

A reagent tablet for determination of fluoride ion has been prepared using ethylenediamine-N,N,N′,N′-tetraacetate complex of zirconium (Zr-EDTA), 3-hydroxy-2′-flavone (FS) and an appropriate pH buffer. Dissolving of the tablet into water exhibits an intense blue fluorescence (λ_max = 460 nm) upon excitation at 377 nm and the fluorescence intensity decreases with the presence of fluoride ion. Hence, a simple fluorescent detection procedure for fluoride ion in aqueous media was successfully constructed with this tablet. The principle of this detection system is the ligand exchange reaction of FS bound to Zr-EDTA with fluoride ion. The present system provides an easy, rapid and selective determination method of fluoride ion ranging from 5 × 10⁻⁶ to 1 × 10⁻³ mol dm⁻³. The measurement of real samples with this tablet showed the similar results as those by the common method with the Alfusone reagent.     

Determination of four kinds of carbamate pesticides by capillary zone electrophoresis with amperometric detection at a polyamide-modified carbon paste electrode

In this paper, a polyamide-modified carbon paste electrode in capillary zone electrophoresis with amperometric detection (CZE-AD) was firstly applied to the determination of four carbamate pesticides: fenobucarb, isoprocarb, metolcarb and carbaryl. The four carbamates were hydrolyzed in alkalescent aqueous solutions, resulting in the formation of 2-sec-butylphenol, 2-isopropylphenol, m-cresol and α-naphthol, which could be determined by amperometry after capillary electrophoretic separation. Under the selected optimum conditions, the four analytes could be perfectly separated within 23 min. The linear ranges of 2-sec-butylphenol, 2-isopropylphenol and m-cresol were from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹ and that of α-naphthol was from 2.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹ and their detection limits were 3.0 × 10⁻⁸, 3.0 × 10⁻⁸, 3.0 × 10⁻⁸ and 6.0 × 10⁻⁸ mol L⁻¹, respectively (S/N = 3). Fenobucarb, isoprocarb, metolcarb and carbaryl can be indirectly determined by this CZE-AD method with recovery of 105, 104, 110 and 98% and R.S.D. of 4, 3, 4 and 3%, respectively. Above results demonstrated that this method was of high sensitivity, good repeatability and could be used in the rapid determination of the pesticide residues.     

Microvolume turbidimetry for rapid and sensitive determination of the acid labile sulfide fraction in waters after headspace single-drop microextraction with in situ generation of volatile hydrogen sulfide

In this work, we demonstrate the feasibility of applying headspace single-drop microextraction with in-drop precipitation for the quantitative determination of the acid labile sulfide fraction (H₂S, HS⁻, and S²⁻ (free sulfide), amorphous FeS and some metal sulfide complexes-clusters as ZnS) in aqueous samples by microvolume turbidimetry. The methodology lies in the in situ hydrogen sulfide generation and subsequent sequestration into an alkaline microdrop containing ZnO₂²⁻ and exposed to the headspace above the stirred aqueous sample. The ZnS formed in the drop was then determined by microvolume turbidimetry. The optimum experimental conditions of the proposed method were: 2 μL of a microdrop containing 750 mg L⁻¹ Zn(II) in 1 mol L⁻¹ NaOH exposed to the headspace of a 20-mL aqueous sample stirred at 1600 rpm during 80 s after derivatization with 1 mL of 6 mol L⁻¹ HCl. An enrichment factor of 1710 was achieved in only 80 s. The calibration graph was linear in the range of 5-100 μg L⁻¹ with a detection limit of 0.5 μg L⁻¹. The repeatability, expressed as relative standard deviation, was 5.8% (N = 9). Finally, the proposed methodology was successfully applied to the determination of the acid labile sulfide fraction in different natural water samples.     

Bia-amperometric quantification of salbutamol in pharmaceutical products

This paper presents a simple, rapid and reproducible method of analysis of salbutamol in pharmaceutical products, utilizing batch injection analysis (BIA) associated with amperometric detection. A study of salbutamol oxidation demonstrated a strong dependence between electrode fouling and pH. All determinations were done utilizing a glassy carbon electrode in presence of 3.0 mol l⁻¹ NaOH. A large linear dynamic range from 8×10⁻⁷ to 2×10⁻⁴ mol l⁻¹ was obtained by using an injected volume of 100 μl with a detection limit of 2.5×10⁻⁷ mol l⁻¹. R.S.D. of 0.92% for 50 successive injections of 4×10⁻⁶ mol l⁻¹ of salbutamol and a sample throughput of 60 samples per hour were achieved. The method was applied for salbutamol quantification in syrups.