K2O助剂对合成碳酸二甲酯用Cu/Ni/ZrO2-SiO2催化剂的吸附和催化性能的影响

 用等体积浸渍法制备了ZrO2－SiO2（ZrSiO）表面复合氧化物负载的Cu－Ni催化剂,并用IR,TPR,TPD及微反技术考察了K2O助剂对CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上的吸附及合成碳酸二甲酯（DMC）反应性能的影响．结果表明：加入K2O助剂使CO2在催化剂表面上的吸附增强,当n（K）／n（Cu＋Ni）＝15％时,CO2在催化剂表面上吸附后生成K2CO3;CH3OH在催化剂表面上的解离吸附态（CH3O－和H＋）的吸附减弱;CO2和CH3OH在Cu－Ni／ZrSiO催化剂表面上反应的主要产物为DMC,H2O,CO和CH2O;随着K2O助剂的加入,反应转化率及DMC选择性提高,副产物（CO和CH2O）的选择性下降．根据实验结果,探讨了K2O对催化剂表面活性中心电荷分布的影响．     

不同方法制备的Ni／ZrO2-CeO2-Al2O3催化剂对CH4-CO2重整反应的催化性能

 采用水热合成法、溶胶凝胶法和共沉淀－负载法制备了相同NiO含量的Ni／ZrO2－CeO2－Al2O3催化剂，考察了它们在CH4－CO2重整反应中的催化性能及稳定性，测定了积碳量．用CO2程序升温脱附方法测试了它们的CO2吸附性能，用H2程序升温脱附方法测试了表面Ni的分散度．结果表明，随温度升高，CH4和CO2转化率降低的顺序是：溶胶凝胶法≈共沉淀－负载法＞水热合成法，并且反应产物中n（CO）／n（H2）比随温度升高而降低．水热法和共沉淀－负载法制备的催化剂稳定性好，且前者的活性比后者高；溶胶凝胶法制得的催化剂活性较高，但易失活．积碳量大小顺序是：水热法＞溶胶凝胶法＞共沉淀－负载法．与其他方法制备的催化剂相比，水热法制备的催化剂对CO2的吸附量更大，\r\n而且积碳主要存在于载体上，从而保证了催化剂的稳定性．     

异戊二烯催化脱氢环氧化的研究

 合成了钼－乙酰丙酮配合物，并进行了表征，确定了其组成为M\r\noO2（acac）2．以MoO2（acac）2为催化剂，以过氧化氢为氧化剂，对\r\n异戊二烯一步脱氢环氧化制3－甲基呋喃反应进行了研究．考察了反应\r\n条件（催化剂用量、反应底物之比、温度、时间、溶剂和助剂等）对该\r\n反应的影响．结果表明，在n（cat）∶n（CH2∶C（CH3）CH∶CH2）∶\r\nn（H2O2）＝1∶100∶100，θ＝40℃，t＝6h的反应条件下，异戊二烯\r\n转化率为70．8％，3－甲基呋喃选择性为54．8％．提出了异戊二烯脱\r\n氢环氧化可能的反应机理．     

Ni含量及预硫化对NiW/γ-Al2O3催化剂上噻吩加氢脱硫反应活性的影响

 采用连续流动微反装置考察了活性组分Ni／（Ni＋W）原子比及\r\n预硫化条件对NiW／γ－Al2O3催化剂噻吩加氢脱硫（HDS）反应活性的\r\n影响．用X射线光电子能谱和电镜微区元素分析方法对硫化态催化剂进\r\n行了表征．结果表明，催化剂的组成、硫化方法、硫化度和反应条件等\r\n都能影响NiW／γ－Al2O3催化剂的HDS反应活性．对于在较低温度（30\r\n0℃）下硫化的催化剂，当反应温度较低（260～290℃）时，最佳Ni／\r\n（Ni＋W）原子比为0．50，而当反应温度较高（330～360℃）时，最佳\r\nNi／（Ni＋W）原子比为0．23．当催化剂在300～450℃下硫化时，其噻\r\n吩HDS反应活性随硫化温度升高而增大，表明硫化度较高的催化剂具有\r\n较高的HDS反应活性．     

Ni/CeO2-Al2O3催化剂上CH4-CO2转化积炭性能的研究

采用脉冲微量反应技术研究了添加n型半导体氧化物CeO2对Ni基催化剂上CH4积炭／CO2消炭性能的影响，用TPR，XPS和氢吸附技术对催化剂进行了表征。结果表明，活性金属原子Ni与半导体氧化物CeO2之间存在金属－半导体相互作用（MScI),CeO2的添加提高了活性原子Ni^0的d电子密度，在一定程度上抑制了CH4分子中C－Hσ电子向d轨道的迁移，降低了CH4裂解积炭活性；可加强Ni^0原子d轨道向CO2空反馈π轨道的电子迁移，促进CO2分子的活化，提高CO2的消炭活性，使Ni/CeO2-Al2O3催化剂具有较强的抗积炭性能。     

氮原子在Ni平坦和缺陷表面上的吸附和振动

 构造了氮－镍相互作用的5－参数Morse势，研究了氮原子在Ni（\r\n100），Ni（110）和Ni（111）平坦表面的吸附和振动，获得了氮原子\r\n在三个低指数表面的吸附位、吸附构型、结合能和本征振动等数据，计\r\n算结果与实验结果非常吻合．同时，与Ni（100）表面对比，系统研究\r\n了氮原子在Ni（510）台阶面的吸附和扩散．计算结果表明，氮原子在\r\n台阶下部形成最稳定的吸附态，台阶对下台面上扩散的氮原子形成捕获\r\n势，对上台面上扩散的氮原子形成反射势．     

稀土改性Pd/Al2O3催化剂的性能:甲醇分解的活性和选择性

用稀土金属氧化物CeO2和La2O3改性γ-Al2O3担载Pd制备了一系列甲醇分解催化剂，并考察了Pd盐前驱体（氯盐或硝酸盐），稀土种类（镧或／和铈），经的含量（0％－30％），浸渍方法（顺序浸渍或共浸渍）地催化剂性能的影响。结果表明：CeO2能提高Pd/Al2O3催化剂的甲醇分解活性，La2O3能提高催化剂的CO和H2选择性，而CeO2和La2O3在γ-Al2O3上对Pd的催化性能表现出一种协同作用。在10％的La2O3和22％的CeO2共同改性的催化剂上，250℃，甲醇液体空速1.8h^-1条件下反应甲醇转化率达到91．4％，CO（H2）的选择性几乎为100％。     

中孔分子筛HMS负载钴催化剂在费-托合成中的应用:载体HMS的孔径对钴基催化剂性能的影响

 用不同链长度的十二胺，十四胺，十六胺和十八胺等伯胺为模板\r\n剂合成了具有不同孔径大小的HMS中孔分子筛．XRD和低温氮吸附测定表\r\n明，HMS具有典型的中孔分子筛特征，且其孔径大小随HMS合成中所用模\r\n板剂链长度的增加而增加．以HMS为载体，采用孔体积浸渍法制备了负\r\n载量为7．5％的钴催化剂，在接近工业试验条件下（n（H2）／n（CO）\r\n＝2．1，GHSV＝500h－1，p＝2．0MPa，θ＝227℃）考察了载体孔径大\r\n小对费－托合成反应性能的影响．结果表明，与常规的SiO2载体相比，\r\nHMS负载钴催化剂具有更高的催化活性和C5＋选择性；而且，CO转化率\r\n，C5＋选择性及产物中的蜡油比均随着HMS载体孔径的增大而升高．以\r\n7．5％Co／HMS－18为催化剂，CO转化率为78．0％，C5＋选择性为80．\r\n8％，蜡油比为11．1．     

丙烯选择氧化反应中钼基催化剂动态结构的研究

 用原位共焦显微拉曼光谱技术考察了丙烷选择氧化反应中Ag－M\r\no－P－O催化剂的结构，讨论了催化剂动态结构的成因及其对催化剂性\r\n能的影响．实验结果表明，在773K和n（C3H8）∶n（O2）∶n（N2）＝\r\n3∶1∶4的反应条件下，Ag－Mo－P－O催化剂中的Mo－O物种可转化为A\r\ngMoO2PO4中的Mo－O物种（多钼酸根），此时催化剂对丙烷选择氧化具\r\n有较高的催化活性．催化剂中Mo－O物种的转化是由MoO3中Mo－O物种和\r\nAgMoO2PO4中Mo－O物种的结构特性决定的．AgMoO2PO4中的Mo－O物种具\r\n有较强的参与MarsvanKrevelen氧化－还原循环的能力，可能是丙烷选\r\n择氧化反应的活性物种．     

复合氧化物催化剂(Cu)CeO2上硝基苯加氢反应的研究

 基于用FT－IR表征H2与硝基苯在催化剂（Cu）CeO2上的吸附和反\r\n应行为，对硝基苯加氢反应进行了研究．结果表明，氢在催化剂表面的\r\n吸附主要为解离吸附，硝基苯的吸附也主要为化学吸附；两种吸附物种\r\n在催化剂上进行表面反应生成易脱附的苯胺，避免了产物与反应物间的\r\n竞争吸附，有利于反应物完全转化．在（Cu）CeO2催化剂上，硝基苯加\r\n氢反应机理为朗格缪尔－欣谢伍德型，即表面反应为控制步骤．     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.