Call for nominations for the Heinrich-Emanuel-Merck Award

News and Announcements

Call for nominations for the Heinrich-Emanuel-Merck Award     

溶剂化的热力学集团展开理论

把二元溶液的过剩内能（excess energy）分成溶剂-溶剂、溶剂-溶质及溶质-溶质相互作用部分。利用集团展开方法给出了二元溶液在正则系综的配分函数的表达式,利用该表达式得到了溶质的偏摩尔内能(partial molar energy)和偏摩尔熵(partial molar entropy)的表达式。在无限稀溶液情形,过剩偏摩尔内能的溶剂-溶剂部分又称重组织内能（reorganization energy）,它反映了溶质存在时对其周围溶剂分子之间的相互作用能的影响。研究表明,在溶质的粒子数密度相对较大时,溶质分子之间的相互作用将影响过剩偏摩尔内能的溶剂-溶剂部分,对于稀溶液,过剩偏摩尔内能的溶剂-溶剂部分与溶质的摩尔分数成线性关系。对低密度二元溶液,溶质的过剩偏摩尔内能和过剩偏摩尔熵也与溶质的摩尔分数成线性关系。     

Bump-hunting for the proficiency tester--searching for multimodality

Kernel density estimation is a method for producing a smooth density approximation to a dataset and avoiding some of the problems associated with histograms. If it is used with a degree of smoothing determined by a fitness for purpose criterion, it can be applied to proficiency test data in order to test for multimodality in the z-scores. The bootstrap is an essential additional technique to determine how rugged the initially estimated kernel density is: the random resampling of the data in the bootstrap simulates a complete blind repeat of the proficiency test. In addition, useful estimates of the standard error of a mode can be thus obtained. It is suggested that a mode and its standard error can be used as an assigned value and its standard uncertainty.     

A methodology for choosing parameters for ESR readout of alanine dosimeters for radiotherapy

Spectrometer settings for ESR readout of alanine dosimeters for radiotherapy have been investigated. Several ESR parameters were studied and determined. The main reason for this work is to choose the suitable parameters to increase signal-to-noise ratio and to reduce the uncertainty on ESR readout, which is one of the main components of uncertainty of alanine/ESR dosimetry system for radiotherapy. The new spectrometer settings have been applied for ESR readout of alanine dosimeters irradiated from 1 to 10 Gy. A higher signal-to-noise ratio has been achieved compared to our old spectrometer settings. The extended uncertainty (k=2) has been evaluated in the dose range 2–10 Gy (maximum uncertainty of 4.9% for 2 Gy, while minimum uncertainty of 1.4% for 10 Gy), which implies that the alanine/ESR dosimetry system can be applied to radiotherapy dose level that needs a global accuracy of 5%.     

Epidemiological Support for an Hypothesis for Melanoma Induction Indicating a Role for UVA Radiation

An hypothesis for melanoma induction is presented: UV radiation absorbed by melanin in melanocytes generates products that may activate the carcinogenic process. Products formed by UV absorption in the upper layers of the epidermis cannot diffuse down as far as to the melanocytes. Thus, melanin in the upper layer of the skin may be protective, while that in melanocytes may be photocarcinogenic. Observations that support this hypothesis include: (1) Africans with dark skin have a reduced risk of getting all types of skin cancer as compared with Caucasians, but the ratio of their incidence rates of cutaneous malignant melanoma to that of squamous cell carcinoma is larger than the corresponding ratio for Caucasians. (2) Albino Africans, as compared with normally pigmented Africans, seem to have a relatively small risk of getting cutaneous malignant melanomas compared to nonmelanomas. This is probably also true for albino and normally pigmented Caucasians. (3) Among sun-sensitive, poorly tanning persons, frequent UV exposures are associated with increased risk of melanoma, whereas among sun-resistant, well-tanning persons, increased frequency of exposure is associated with decreased melanoma risk. (4) It is likely that UVA, being absorbed by melanin, might have a melanoma-inducing effect. This is in agreement with some epidemiological investigations which indicate that sun-screen lotions may not protect sufficiently against melanoma induction. The relative latitude gradient for UVA is much smaller than that for UVB. The same is true for the relative latitude gradient of cutaneous malignant melanoma as compared with squamous cell carcinoma and basal cell carcinoma. Under the assumption that the average slopes of the curves relating incidence rates with fluences of carcinogenic UV radiation are similar for melanomas and nonmelanomas, these facts are in agreement with the assumption that UVA plays a significant role in the induction of melanomas in humans. This is in agreement with the experimental results with Xiphophorus.     

Searching for an enhanced predictive tool for mutagenicity

The Multiple Computer Automated Structure Evaluation (MCASE) program was used to evaluate the mutagenic potential of organic compounds. The experimental Ames test mutagenic activities for 2513 chemicals were collected from various literature sources. All chemicals have experimental results in one or more Salmonella tester strains. A general mutagenicity data set and fifteen individual Salmonella test strain data sets were compiled. Analysis of the learning sets by the MCASE program resulted in the derivation of good correlations between chemical structure and mutagenic activity. Significant improvement was obtained as more data was added to the learning databases when compared with the results of our previous reports. Several biophores were identified as being responsible for the mutagenic activity of the majority of active chemicals in each individual mutagenicity module. It was shown that the multiple-database mutagenicity model showed a clear advantage over normally used single-database models. The expertise produced by this analysis can be used to predict the mutagenic potential of new compounds.     

Design for degradation or recycling for reuse?

1. Download : Download high-res image (100KB)
2. Download : Download full-size image

     

Wetting for self-healing and electrowetting for additive manufacturing

Advanced additive manufacturing actively widens its tool box of wettability-related phenomena to be used in production of new items. Novel self-healing engineering materials incorporate vascular networks with two types of nanochannels: the one containing a resin monomer, whereas another one — a curing agent. If such nanocomposites are damaged locally, both types of channels are locally broken, and they release resin monomer and curing agent droplets. These droplets spread by wettability over the nanotextured matrix, touch each other, and coalesce, which triggers polymerization reaction and crack stitching. Wettability-facilitated droplet spreading is accompanied by liquid imbibition in the pores in the nanofiber network. Such process peculiarities are in focus in the present review. An additional process relevant in direct writing and 3D printing is electrowetting (EW). It stems from the change in the contact angle in response to the electric polarization of dielectric substrates. EW allows movement of droplets on horizontal, vertical, and inverse surfaces, which can significantly facilitate the existing direct writing and 3D printing technologies. Accordingly, EW is also in focus in the present review.     

New ceramic-carbon composites for electrodes for electrochemical capacitors

A new class of composite materials is introduced. Fine powders of silica, titania, Y-modified zirconia, and three types of alumina were pressed and sintered to form porous monoliths with relatively uniform pore structure. Carbon was then deposited in the pores of such monoliths by thermal decomposition of dichloromethane, cyclohexene, and glucose. The structure of the carbon deposit was studied by low-temperature nitrogen adsorption and by thermal analysis. The composite materials were used as electrodes in electrochemical capacitors with 1-ethyl-3-methylimidazolium trifluoromethylsulfonate (a low-temperature ionic liquid) as the electrolyte. High capacitances were observed for glucose-derived materials, which had high specific surface areas.     

Advances for proficiency testing for genetic laboratory science

Nucleic acid based clinical genetic testing has undergone explosive growth in recent years due in large part to the human genome project. Characterization of the human genome has led to a molecular understanding of the pathogenesis of many human diseases, and ultimately to clinical molecular tests becoming routinely used to diagnose a wide diversity of diseases. This rapid growth in clinical molecular genetic testing coupled with the complexity of the analytical procedures underscores the necessity for proficiency testing (i.e. external quality assessment) to allow laboratories offering such services the ability to evaluate their analytical procedures via inter-laboratory comparisons. The American College of Medical Genetics (ACMG) in partnership with the College of American Pathologists (CAP) have been offering proficiency testing for clinical molecular genetics laboratories since 1995, and presently have more than 230 laboratories from 11 countries enrolled in this program. This paper describes the evolution of this program and several challenges encountered in the delivery of a proficiency testing program for laboratories offering clinical molecular genetic services. Received: 13 April 2002 Accepted: 18 July 2002     

Protective coatings for stainless steel for SOFC applications

In this paper, a coating procedure based on spin coating of metal oxide polymer precursors on stainless steel, which decreases the oxide scale growth rate, is evaluated. The yttrium and cobalt solutions were used as polymer precursors, while a ferritic stainless steel Crofer 22 APU was used for the deposition of protective coatings. The thickness of deposited protective film was about ~500 nm. The effectiveness of protective layer was evaluated by cyclic thermogravimetry, oxide scale electrical conductivity, and X-ray diffractometry. The results show that steel coated with yttrium polymer precursor has better properties than uncoated or cobalt-coated sample.     

Protecting Groups for Thiols Suitable for Suzuki Conditions

The thiol group is one of the few groups NOT tolerated by the Suzuki reaction. Therefore, a new protective group, the 2-methoxyisobutyryl group, was developed by tuning the electronic/steric properties of the acyl residue. Other thioesters, such as thioacetate, result in a more or less dominant side reaction, which to date has not been described: sulfur-assisted acylation of boronic acids. The reaction pathway for this new reaction is discussed.     

Polymeric Lids for Microcontainers for Oral Protein Delivery

Oral delivery of proteins and peptides is one of the main challenges in pharmaceutical drug development. Microdevices have the possibility to protect the therapeutics until release is desired, avoiding losses by degradation. One type of microdevice is polymeric microcontainers. In this study, lysozyme is chosen as model protein and loaded into microcontainers with the permeation enhancer sodium decanoate (C10). The loaded microcontainers are sealed and functionalized by applying polymeric lids onto the cavity of the devices. The first lid is poly(lactic‐co‐glycolic) acid (PLGA) and on top of this either polyethylene glycol (PEG) or chitosan is applied (PLGA+PEG or PLGA+chitosan, respectively). The functionalization is evaluated in vitro for morphology, drug release, and mucoadhesive properties. These are coupled with in vitro and ex vivo studies using Caco‐2 cells, Caco‐2/HT29‐MTX‐E12 co‐cultures, and porcine intestinal tissue. PLGA+chitosan shows slower release compared to PLGA+PEG or only PLGA in buffer and the transport of lysozyme across cell cultures is not enhanced compared to the bulk powder. Microcontainers coated with chitosan or PEG demonstrate a three times stronger adhesion during ex vivo mucoadhesion studies compared to samples without coatings. Altogether, functionalized microcontainers with mucoadhesive properties and tunable release for oral protein delivery are developed and characterized.