Standard Reference Materials in the Former Soviet Union and Russia: Historical Aspects

The history of the developments and applications of standard reference materials (SRMs) in the former Soviet Union and Russia (late in the 19th and early in the 20th centuries), as well as in other countries, were considered. Data on the organization of research, on methodological concepts of the SRM quality assurance, and on the optimization of a triad—normative documents (standards) regulating the composition of materials (substances), standards for the procedures of quantitative analysis, and required SRMs—were given. Persons who primarily contributed to solving the problem under discussion were mentioned. As immediate tasks of importance, the development of international SRMs, the intercomparison of national SRMs for determining their interchangeability, and the optimization of the assortment (number of types) of SRMs indispensable and sufficient (irredundant) for the analysis of particular samples were considered.     

Determination of polybrominated diphenyl ethers in environmental standard reference materials

Standard reference materials (SRMs) are valuable tools in developing and validating analytical methods to improve quality assurance standards. The National Institute of Standards and Technology (NIST) has a long history of providing environmental SRMs with certified concentrations of organic and inorganic contaminants. Here we report on new certified and reference concentrations for 27 polybrominated diphenyl ether (PBDE) congeners in seven different SRMs: cod-liver oil, whale blubber, fish tissue (two materials), mussel tissue and sediment (two materials). PBDEs were measured in these SRMs, with the lowest concentrations measured in mussel tissue (SRM 1974b) and the highest in sediment collected from the New York/New Jersey Waterway (SRM 1944). Comparing the relative PBDE congener concentrations within the samples, we found the biota SRMs contained primarily tetrabrominated and pentabrominated diphenyl ethers, whereas the sediment SRMs contained primarily decabromodiphenyl ether (BDE 209). The cod-liver oil (SRM 1588b) and whale blubber (SRM 1945) materials were also found to contain measurable concentrations of two methoxylated PBDEs (MeO-BDEs). Certified and reference concentrations are reported for 12 PBDE congeners measured in the biota SRMs and reference values are available for two MeO-BDEs. Results from a sediment interlaboratory comparison PBDE exercise are available for the two sediment SRMs (1941b and 1944).     

Use of reference materials in coastal monitoring quality assurance

The NOAA National Status and Trends (NS&T) Program determines the current status of, and changes over time in the environmental health of U.S estuarine and coastal waters. Concentrations of organic and inorganic contaminants are determined in bivalves, bottom-dwelling fish and sediments. The quality of the analytical data generated by the NS&T Program is over-seen by the performance-based Quality Assurance Project, which is designed to document sampling protocols, analytical procedures, and laboratory performance, and to reduce intralaboratory and interlaboratory variation. All NS&T cooperating laboratories are required to participate in yearly intercomparison exercises. The analysis of reference materials, such as the National Research Council of Canada's Certified Reference Materials (CRMs) and National Institute of Standards and Technology's (NIST) Standard Reference Materials (SRMs), and of control materials, is required. Because of the need for marine matrix reference materials and standards, NOAA contributed to the production of eight NIST SRMs and seven internal standard solutions. Analytical data from all control materials and all matrix reference materials are reported to the Program office.     

Low level determination of manganese in biological reference materials by neutron activation analysis

A simple method was developed for the low level determination of manganese in biological materials by neutron activation analysis with radiochemical separation based on manganese dioxide precipitation. Precision and accuracy of the method were tested by analyses of IAEA reference materials Animal Muscle H-4, Milk Powder A-11, Freeze Dried Animal Blood A-13, Horse Kidney H-8, and Mixed Human Diet H-9. Interferences from iron and cobalt were also evaluated.     

Determination of perfluorinated alkyl acid concentrations in biological standard reference materials

Standard reference materials (SRMs) are homogeneous, well-characterized materials used to validate measurements and improve the quality of analytical data. The National Institute of Standards and Technology (NIST) has a wide range of SRMs that have mass fraction values assigned for legacy pollutants. These SRMs can also serve as test materials for method development, method validation, and measurement for contaminants of emerging concern. Because inter-laboratory comparison studies have revealed substantial variability of measurements of perfluoroalkyl acids (PFAAs), future analytical measurements will benefit from determination of consensus values for PFAAs in SRMs to provide a means to demonstrate method-specific performance. To that end, NIST, in collaboration with other groups, has been measuring concentrations of PFAAs in a variety of SRMs. Here we report levels of PFAAs and perfluorooctane sulfonamide (PFOSA) determined in four biological SRMs: fish tissue (SRM 1946 Lake Superior Fish Tissue, SRM 1947 Lake Michigan Fish Tissue), bovine liver (SRM 1577c), and mussel tissue (SRM 2974a). We also report concentrations for three in-house quality-control materials: beluga whale liver, pygmy sperm whale liver, and white-sided dolphin liver. Measurements in SRMs show an array of PFAAs, with perfluorooctane sulfonate (PFOS) being the most frequently detected. Reference and information values are reported for PFAAs measured in these biological SRMs.

Reflections on 35 years of biological SRM production and analyses

Summary During the author's 39 years with the National Bureau of Standards (NBS)/National Institute for Standards and Technology (NIST) as an employee, and since then as Guest Researcher, he has been intimately involved with biological Standard Reference Material (SRM) production and analyses. His involvement with biological reference materials started with the very first biological certified reference material (CRM), the SRM 1571, Orchard Leaves, initiated in 1968 and issued in 1971, through the latest material (SRM 1575a, Pine Needles - renewal), issued in 2003. In addition, for more than 20 years he was Technical Coordinator for botanical SRMs for the NBS/NIST Analytical Chemistry Division. This paper contains his historical reflections and highlights from those years, and includes the techniques used to obtain and process these materials, new developments and procedures that resulted in vastly improved reference materials, the application of high accuracy neutron activation analysis to the certification of these standards, and the trace element quality assurance vital to the accuracy of these standards.     

Traceability of performance evaluation materials

One of the most critical elements of a performance evaluation (PE) program for radioactivity measurements is the traceability of the PE materials to the national standards. The requirements and criteria for the production of traceable environmental and radiobioassay PE materials have been defined by ANSI N42.22 and ANSI N13.30 standards. It is important to note that use of traceable source materials does not necessarily ensure the traceability of subsequently derived PE materials unless verification measurements exist in conjunction with the preparation processes. This paper describes the protocol currently used by NIST for the preparation and verification of air filter, acidified water, spiked soil, synthetic urine, and synthetic fecal PE materials for low-level radioactivity measurements. The process involves gravimetric dilutions and mixing of primary radionuclide NIST Standard Reference Materials (SRMs), addition of the derived master solution to sample matrices, and subsequent verification measurements. Several gamma-emitters were used to trace the gravimetric dilutions and spike addition through an unbroken chain of gamma comparison measurements. The massic activities of alpha- and beta-emitters in the diluted solutions and PE samples were also measured by radiochemical methods and compared with their gravimetric values. A correlation analysis demonstrated that the gamma emitters quantitatively followed ⁹⁰Sr, ²³⁸U, ²³⁸Pu, and ²⁴¹Am throughout the dilution and spiking and can be used as effective process monitors. The statistical results from t-tests, box plots, and normal probability tests suggested that traceability of radionuclides in the PE materials to their primary standards can be verified to within 1%, with an overall precision better than 2% (1s).     

Synthetic musk fragrances in environmental Standard Reference Materials

Synthetic musk fragrances have been measured in water, air, sediments, sewage sludge, and biota worldwide. As the study of the environmental fate and impacts of these compounds progresses, the need for Standard Reference Materials (SRMs) for these compounds to facilitate analytical method improvement and interlaboratory comparisons becomes increasingly important. The National Institute of Standards and Technology (NIST) issues environmental matrix SRMs with certified concentrations for a variety of persistent organic pollutants including polycyclic aromatic hydrocarbons (PAHs), chlorinated pesticides, and polychlorinated biphenyl congeners (PCBs). Until now synthetic musk fragrance concentrations have not been reported in NIST SRMs. The objective of this study was to provide reference values for several commonly detected synthetic musk fragrances in several NIST natural matrix SRMs. In this study five polycyclic musk fragrances [HHCB (1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-γ-2-benzopyran), AHTN (7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene), ADBI (4-acetyl-1,1-dimethyl-6-tert-butylindane), AHMI (6-acetyl-1,1,2,3,3,5-hexamethylindane), and ATII (5-acetyl-1,1,2,6-tetramethyl-3-isopropylindane] and two nitro musk fragrances [musk xylene (1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene) and musk ketone (4-tert-butyl-3,5-dinitro-2,6-dimethylacetophenone)] were measured in selected environmental SRMs. Gas chromatography–electron impact mass spectrometry (GC/EI-MS) was used for all analyses. HHCB was the most frequently detected synthetic musk fragrance and was detected in SRM 2585 Organic Contaminants in House Dust, SRM 2781 Domestic Sludge, SRM 1974b Organics in Mussel Tissue (Mytilus edulis), and SRM 1947 Lake Michigan Fish Tissue. It was not detected in SRM 1946 Lake Superior Fish Tissue or SRM 1945 Organics in Whale Blubber. Concentrations of HHCB in these SRMs ranged from 1.12 ng/g in SRM 1947 to 92,901 ng/g in SRM 2781. All of the polycyclic musk fragrances were detected in SRM 2781 and all of the target compounds were detected in SRM 2585. Electronic supplementary material Supplementary material is available for this article at and is accessible to authorized users.     

Evaluation of homogeneity of selected reference materials for selenium by cyclic neutron activation analysis

The homogeneity of four reference materials was evaluated for Se by cyclic instrumental neutron activation analysis (CINAA). The relative standard deviation for Se measurements at ppb levels by CINAA was <12% for NIST Wheat Flour (SRM 1567) in 5–10 mg samples, while it was <11% for Chinese Hair (HH–CH-1), <13% for IAEA Animal Muscle (H-4) and 25% for IAEA Animal Blood (A-13) in 50 mg samples. The highest relative subsampling uncertainties were observed in the mass range of samples 50 mg for Chinese Hair, 100 mg for Wheat Flour and Animal Muscle and 300 mg for Animal Blood. The results of a one-way analysis of variance indicate that all reference materials above these mass ranges are adequately homogeneous with respect to Se distribution. Our data suggest that these materials, except Animal Blood, can be used as reference standards for Se in Quality assurance programs well below the sample masses re commended by the issuing agencies.     

Standard reference materials (SRMs) for determination of organic contaminants in environmental samples

For the past 25 years the National Institute of Standards and Technology (NIST) has developed certified reference materials (CRMs), known as standard reference materials (SRMs), for determination of organic contaminants in environmental matrices. Assignment of certified concentrations has usually been based on combining results from two or more independent analytical methods. The first-generation environmental-matrix SRMs were issued with certified concentrations for a limited number (5 to 10) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Improvements in the analytical certification approach significantly expanded the number and classes of contaminants determined. Environmental-matrix SRMs currently available include air and diesel particulate matter, coal tar, marine and river sediment, mussel tissue, fish oil and tissue, and human serum, with concentrations typically assigned for 50 to 90 organic contaminants, for example PAHs, nitro-substituted PAHs, PCBs, chlorinated pesticides, and polybrominated diphenyl ethers (PBDEs). Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Standard reference materials for foods and dietary supplements

Well-characterized certified reference materials are needed by laboratories in the food testing, dietary supplement, and nutrition communities to facilitate compliance with labeling laws and improve the accuracy of information provided on product labels, so that consumers can make good choices. As a result of the enactment of the Nutrition Labeling and Education Act of 1990 and the Infant Formula Act of 1980, the National Institute of Standards and Technology (NIST) worked to develop a series of food-matrix standard reference materials (SRMs) characterized for nutrient concentrations. These include SRM 1544 Fatty Acids and Cholesterol in a Frozen Diet Composite, SRM 1546 Meat Homogenate, SRM 1548a Typical Diet, SRM 1566b Oyster Tissue, SRM 1846 Infant Formula, SRM 1946 Lake Superior Fish Tissue, SRM 1947 Lake Michigan Fish Tissue, SRM 2383 Baby Food Composite, SRM 2384 Baking Chocolate, SRM 2385 Slurried Spinach, and SRM 2387 Peanut Butter. With the enactment of the Dietary Supplement Health and Education Act of 1994, NIST has been working to develop suites of dietary supplement SRMs characterized for active and marker compounds and for toxic elements and pesticides, where appropriate. An updated SRM 1588b Organics in Cod Liver Oil, a suite of ephedra-containing materials (SRMs 3240–3245), a carrot extract in oil (SRM 3276), and a suite of ginkgo-containing materials (SRMs 3246–3248) are available. Several other materials are currently in preparation. Dietary supplements are sometimes provided in forms that are food-like; for these, values may also be assigned for nutrients, for example SRM 3244 Ephedra-Containing Protein Powder. Both the food-matrix and dietary supplement reference materials are intended primarily for validation of analytical methods. They may also be used as “primary control materials” in assignment of values to in-house (secondary) control materials to confirm accuracy and to establish measurement traceability to NIST.     

Separation of 26 toxaphene congeners and measurement in air particulate matter SRMs compared to technical toxaphene SRM 3067

Toxaphene is a complex technical mixture that has been found ubiquitously in the environment but has caused issues for analysis, especially of individual congeners. This paper reports the elution order of 26 major toxaphene congeners on three gas chromatographic columns. The three different stationary phases generally had similar elution orders for the toxaphene congeners, but fewer co-elutions occurred on a low-bleed, low-polarity column. These congeners (except for two that co-eluted and were not added to the calibration mixture) were examined in air particulate matter standard reference materials (SRMs), 1648a, 1649a, and 1649b as well as SRM 3067 toxaphene in methanol for assignment of reference values. SRM 3067 had mass fractions an order of magnitude greater than the air particulate SRMs, which ranged from 0.568 ± 0.018 ng g⁻¹ dry mass (B9-2006 in SRM 1648a) to 12.9 ± 0.20 ng g⁻¹ dry mass (B9-715 (P 58) in SRM 1649a). The three air particulate SRMs all had different mass fractions and proportions of congeners relative to the sum of the toxaphene congeners. SRM 3067 may be useful as a technical mixture toxaphene congener calibrant. SRMs 1648a and 1649b will serve as reference materials for the analysis of 21 (three congeners were not included due to values below the detection limit or a potential polychlorinated biphenyl co-elution) toxaphene congeners in atmospheric particulate samples.     

The development and certification of Standard Reference Materials® (SRMs) to assess and ensure accurate measurement of Pb in the environment

The National Institute of Standards and Technology (NIST) has had a major quality-assurance role in the federal effort to reduce lead poisoning of children in the United States through its mission of ensuring the accuracy of chemical measurements. NIST certifies reference materials (standard reference materials – SRMs) that are used to benchmark measurements by secondary and field methods of analysis – to ensure that decisions of great health and economic impact are soundly based on good measurement science. Over the past 10 years, in cooperation with the US Environmental Protection Agency (EPA), US Department of Housing and Urban Development (HUD), and the United States Geological Survey (USGS), NIST has prepared and certified SRMs for lead content in soil, indoor dust, and paint. The role of these materials in meeting regulatory and abatement needs is described and their certified values are summarized.     

Determination of polybrominated diphenyl ethers in indoor dust standard reference materials

Polybrominated diphenyl ethers (PBDEs) have been measured for the first time in three different indoor dust Standard Reference Materials (SRMs) prepared by the National Institute of Standards and Technology (NIST). Two of these, SRM 2583 (Trace Elements in Indoor Dust) and SRM 2584 (Trace Elements in Indoor Dust), have been certified previously for lead and other inorganic constituents. A third, SRM 2585 (Organics in Indoor Dust), is a new indoor dust reference material prepared by NIST which will be certified for various organic compounds (polycyclic aromatic hydrocarbons, pesticides and polychlorinated biphenyls) in 2005 including certified concentrations for 16 individual PBDE congeners and reference values for an additional three PBDE congeners. Dust SRMs were analyzed for 30 PBDE congeners using high-resolution gas chromatography combined with low-resolution mass spectrometry operated in both negative chemical ionization (GC/ECNI–MS) and electron impact ionization (GC/EI–MS) modes. Sensitivity was an order of magnitude higher using GC/ECNI–MS relative to GC/EI–MS. These SRMs have been characterized and compared to the three PBDE commercial products (pentaBDE, octaBDE and decaBDE). PentaBDE and DecaBDE were present in all three SRMs and were the dominant commercial products, making up approximately 33% and 58%, respectively. Recent studies suggest that house dust may be a leading source of human exposure to PBDEs. These SRMs are the first reference materials with certified concentrations for PBDEs, which will aid in validating future measurements of PBDEs in house dust and other similar matrices. Electronic Supplementary Material Supplementary material is available for this article at http://dx.doi.org/ 10.1007/s00216-005-0227-y     

Determination of caffeine and caffeine-related metabolites in ephedra-containing standard reference materials using liquid chromatography with absorbance detection and tandem mass spectrometry

The concentrations of caffeine and caffeine-related compounds in 2 ephedra-containing reference materials have been determined by 3 independent methods with measurements performed by the National Institute of Standards and Technology (NIST) and a collaborating laboratory. Results from the 3 methods were used for value assignment of caffeine, theobromine, and theophylline in these Standard Reference Materials (SRMs). The methods used at NIST to determine the concentration levels of caffeine, theobromine, and theophylline in SRM 3243 Ephedra-Containing Solid Oral Dosage Form and SRM 3244 Ephedra-Containing Protein Powder used reversed-phase liquid chromatography with absorbance detection and tandem mass spectrometry. These reference materials are part of the first suite in a series of NIST SRMs that provide concentration values for multiple components in dietary supplements. These SRMs are primarily intended for method validation and for use as control materials to support the analysis of dietary supplements and similar materials.     

Simultaneous determination of inorganic mercury,methylmercury, and total mercury concentrations in cryogenic fresh-frozen and freeze-dried biological reference materials

Two speciated isotope dilution (SID) approaches consisting of a single-spike (SS) method and a double-spike (DS) method including a reaction/transformation model for the correction of inadvertent transformations affecting mercury species were compared in terms of accuracy, method performance, and robustness for the simultaneous determination of methylmercury (MeHg), inorganic mercury (iHg), and total mercury (HgT) concentrations in five biological Standard Reference Materials (SRMs). The SRMs consisted of oyster and mussel tissue materials displaying different mercury species concentration levels and different textural/matrix properties including freeze-dried (FD) materials (SRMs 1566b, 2976, and 2977) and cryogenically prepared and stored fresh-frozen (FF) materials (SRMs 1974a, 1974b). Each sample was spiked with (201)iHg (Oak Ridge National Laboratory, ORNL) and Me(202)Hg (Institute for Reference Materials and Measurements. IRMM-670) solutions and analyzed using alkaline microwave digestion, ethylation, and gas chromatography inductively coupled plasma mass spectrometry (GC/ICP-MS). The results obtained by the SS-SID method suggested that FF and FD materials are not always commutable for the simultaneous determination of iHg, MeHg, and HgT, due to potential transformation reactions resulting probably from the methodology and/or from the textural/matrix properties of the materials. These transformations can occasionally significantly affect mercury species concentration results obtained by SS-SID, depending on the species investigated and the materials considered. The results obtained by the DS-SID method indicated that the two classes of materials were commutable. The simultaneous and corrected concentrations of iHg, MeHg, and HgT obtained by this technique were not found to be statistically different form the certified and reference concentration together with their expanded uncertainty budgets for the five SRMs investigated, exemplifying the robustness, the accuracy, and the improved commutability of this method compared to SS-SID measurements.     

Determination of perfluorinated alkyl acid concentrations in human serum and milk standard reference materials

Standard Reference Materials (SRMs) are certified reference materials produced by the National Institute of Standards and Technology that are homogeneous materials well characterized with values for specified properties, such as environmental contaminant concentrations. They can be used to validate measurement methods and are critical in improving data quality. Disagreements in perfluorinated alkyl acid (PFAA) concentrations measured in environmental matrices during past interlaboratory comparisons emphasized the need for SRMs with values assigned for PFAAs. We performed a new interlaboratory comparison among six laboratories and provided, for the first time, value assignment of PFAAs in SRMs. Concentrations for perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), and other PFAAs in two human serum and two human milk SRMs are reported. PFAA concentration measurements agreed for serum SRM 1957 using different analytical methods in six laboratories and for milk SRM 1954 in three laboratories. The interlaboratory relative standard deviation for PFOS in SRM 1957 was 7%, which is an improvement over past interlaboratory studies. Matrix interferences are discussed, as well as temporal trends and the percentage of branched vs. linear isomers. The concentrations in these SRMs are similar to the present-day average concentrations measured in human serum and milk, resulting in representative and useful control materials for PFAA human monitoring studies.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.