Crosslinked α-olefin-diene copolymers prepared using a metallocene catalyst deposited on the surface of SiO<Subscript>2</Subscript>-modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>: Ferromagnetic oil sponges

The structure of zirconocene is determined experimentally. Zirconocene is found to catalyze effectively the copolymerization of α-olefins with nonconjugated dienes in the presence of minimal amounts of methylalumoxane as an organoaluminum activator. On the basis of a highly ferromagnetic carrier (a product of the reaction between Fe₃O₄ microparticles and Si(OEt)₄), a deposited zirconocene catalyst is obtained. Using the latter, copolymers of α-olefins (1-hexene, 1-octene, and 1-decene) with 1,7-octadiene and 1,4- di(3-butenyl)benzene are synthesized. The obtained ferromagnetic copolymers demonstrate properties of effective absorbents of hydrocarbons, namely, oil sponges. A copolymer of 1-octene and 1,4-di(3-butenyl) benzene is found to possess the maximum adsorption capacity (up to 8) in the studied series.     

Polymerization of higher α-olefins with the catalytic system (4R,5R)-2,2-dimethyl-1,3-dioxolane-4,5-bis(perfluorophenyldimethanolate) titanium(IV) dichloride-organoaluminum compound

The catalytic activity of the titanium(IV) dichloride complex with the (4R,5R)-2,2-dimethyl-1,3-dioxolane-4,5-bis(perfluorophenyldimethanol) ligand in the presence of a cocatalyst (polymethylaluminoxane, triethylaluminum, or triisobutylaluminum) in the polymerization of higher α-olefins (1-hexene, 1-octene, 1-decene) is investigated. It is shown that, depending on the types of cocatalyst and monomer and the molar ratio of components of the catalytic system, high- or ultrahigh-molecular-mass poly(α-olefins) with M _w = (4 × 10⁵)?(3 × 10⁶) can be prepared. The chain microstructure of polyhexene is examined.     

A Study of picosecond dehalogenation of chlorobenzene anions in liquids by positronium inhibition measurements

Radiation chemistry and results of Ps yields indicate that the following processes occur in the positron spur in solution of halogen-substituted hydrocarbons, RX_n: e⁺ + e^? → Ps, e^? + RX _n → (RX_n)^? → RX_n?1 + X^?, e⁺ + (RX_n)^? → Ps + RX_n, e⁺ + X^? → [X^?, e⁺]. Hence the trapped electron can form Ps only if (RX _n)^? is stable or has a lifetime that is longer than o comparable to the Ps formation time. Previous studies have shown that some of the strongly chlorinated benzenes (n = 4.5 give reasonable inhibition in benzene but not in linear hydrocarbons. The reason is very probably that the dechlorination time is much shorter in benzene than in saturated hydrocarbons because Cl^? is more strongly solvated in benzene than in non-aromatic hydrocarbons. To test those ideas further we have begun detailed studies of solutions of the possible “intermediate” inhibitors, viz. 1,2,3,5- and 1,2,4,5-C₆H₂Cl₄, in mixtures of C₆H₆/C₆H₁₄ different methyl-substituted benzene aniline, anisole, dioxane and ethylbenzene. The results are discussed and interpreted in terms of the spur model. The Ps inhibition efficiency of the two isomeric forms of tetrachlorobenzene studied, appears most probably to depend on intramolecular electron transfer with subsequent dehalogenation of the molecular anion on a picosecond timescale. The divergence in inhibitor efficiency obtained for the chlorobenzenes when dissolved in aromatic solvents compared to the same solutes when dissolved in a saturated alkane appears most probably to be caused by complex formation between the initially formed chlorobenzene anion and benzene molecules, which permits a rapid relaxation of the molecular anion with subsequent bond stretching and expulsion of the chloride anion.     

Homo- and copolymerization of styrene and 1-alkene using Ph2Zn-Et(Ind)2ZrCl2-MAO initiator systems

Homopolymerization of α-olefins (1-C_nH_2n, n = 6, 8, 10, 12, 16 and 18) and their copolymerization with styrene were carried out in toluene at 60 °C using diphenylzinc-ethenylbisindenylzirconium dichloride-methylaluminoxane as initiator system. Atactic polystyrene and almost isotactic poly(α-olefin)s were obtained. Copolymerization of S/α-olefin with this initiator system gave isotactic olefin-enriched copolymers. According to DSC analysis, the homopolymers P(1-C₁₂H₂₄), P(1-C₁₆H₃₂), and P(1-C₁₈H₃₆) as well their styrene copolymers are crystalline.     

Oligomerization and co-oligomerization of α-olefins catalyzed by nickel(II)/alkylaluminum systems

This work describes α-olefins oligomerization/co-oligomerization of 1-butene, 1-hexene, 1-octene to linear oligomers (C₈---C₁₆ range) promoted by catalytic systems based on nickel(II) salts/alkylaluminum compounds. Conversion, selectivity (isomerization or oligomerization) and linearity are determined by mass distribution calculation of the substrates (α-olefins) in the products. The best results are obtained with Ni(acac)₂/AlEt₂OEt working at 60°C, Al/Ni ratio between 0.8–1.4 and using toluene as a solvent. Under these conditions, the conversion is higher than 90% giving 40% of oligomerization selectivity. The linearity varies from 65% (C₁₆ fraction) to 98% (C₈ fraction).     

Polymerization of β-cyanopropionaldehyde. III. Polymerization by organoaluminum and by organoaluminum–titanium chloride complexes

The mechanism of formation and stereoregularity of poly(cyanoethyl)oxymethylene have been studied. The polymerization was carried out at ?78°C with use of aluminum compounds [Al(C₂H₅)₃, Al(C₂H₅)₂Cl, Al(C₂H₅)Cl₂, and AlCl₃] and complex catalysts [Al(C₂H₅)₃–TiCl₄, Al(C₂H₅)₃–TiCl₃, and Al(C₂H₅)₂Cl–TiCl₃] as initiators. The stereoregularity of poly(cyanoethyl)oxymethylene was estimated from the optical density ratio, D₁₂₅₈/D₁₂₇₀, in the infrared absorption spectrum. Polymer yields were observed to depend upon the aluminum compound used as initiators, while the stereoregularity of the polymer was nearly independent of the particular aluminum compound used. As the catalyst ratio of titanium chloride to aluminum compound increased, the polymer yield was found to increase to a maximum and then to decrease with further increase of the ratio. It is supposed that titanium chlorides themselves increase the acid strength of aluminum compounds through chlorination, resulting in the change of the polymer yield. The highest stereoregularity of poly(cyanoethyl)oxymethylene was attained by increasing the molar ratio of titanium trichloride to aluminum and by treating β-cyanopropionaldehyde (CPA) with titanium trichloride prior to the polymerization. Complex formation of the nitrile group of CPA with titanium is considered responsible for the increase in stereoregularity. A propagation mechanism is also proposed.     

Rationalizing chain microstructure in the polyα-olefins synthesized by cationic AlCl3/H2O catalytic system

In this study, three middle range α-olefin monomers including 1-hexene, 1-octene, and 1-decene were oligomerized using conventional AlCl₃/H₂O catalytic system. Molecular weight and microstructure of the oligomers were analyzed by GPC and ¹HNMR, respectively. By ¹HNMR spectra, both internal (CHR=CHR′ and CHR=CR′R′′) and external (CH₂=CR′R′′) olefins containing di and tri-substituted C=C bonds were detected. After successful oligomerization, synthesized polyα-olefins underwent hydrogenation process using Pd(0)-Hal catalyst to yield synthetic oils of PHex, POct, and PDec, respectively and then completion of the hydrogenation was confirmed by ¹HNMR spectroscopy. The microstructure of the synthesized oligomers was rationalized using the ratio under the peak of CH?+?CH₂/CH₃ hydrogens (S1/S2) in ¹HNMR spectra and the degree of oligomerization obtained from M_n. According to the results, the best match between theoretical and real S1/S2 is obtained when considering double bond isomerization in the synthesized PAOs. By knowing PAO molecular weight, a relationship between monomer type and S1/S2 in the PAO homopolymers was detected. Our suggested methodology can be generalized to the unknown PAO homopolymers to unravel their monomer type by simple ¹HNMR and GPC analyses.     

Oligomerization of ethylene with a homogeneous sulfonated nickel ylide–aluminum alkoxide catalyst

Various organoaluminum compounds strongly affect reactivity of a sulfonated nickel ylide complex in its reactions with ethylene. The complex, if used alone, is an active single-component catalyst for ethylene oligomerization to linear 1-alkenes. Al(C₂H₅)₃ and tetraethylaluminoxane completely deactivate the catalyst by reducing it to Ni(O). Alkylaluminum halides, such as Al(C₂H₅)₂Cl and Al(C₂H₅)Cl₂, convert the nickel complex into a very active catalyst for ethylene dimerization to mixtures of butenes. Aluminum alkoxides, e.g., Al(C₂H₅)₂OC₂H₅, AlC₂H₅(OC₂H₅)₂, and Al(OC₂H₅)₃, significantly increase oligomerization activity by a factor of 20–100. The distribution of 1-alkenes (in the C₄? C₄₀ + range) produced with the sulfonated nickel ylide–aluminum alkoxide catalyst follows the Flory molecular weight distribution law. The ratio of the chain termination to chain propagation rate constants is ca. 0.3 and is not temperature-sensitive in the 50–120°C range. Kinetic analysis of the ethylene oligomerization reaction with the binary catalytic system showed that the number of active centers is proportional to the nickel complex concentration. The effective activation energy of ethylene oligomerization with the catalyst is ca. 27 kJ/mol. The oligomerization catalysts loose their activity in time. The activity decay follows the first-order kinetic law. The rate of the decay increases with increasing temperature and is caused mainly by the intrinsic instability of active species.     

Isomerization of olefins on hydride-halide compounds of titanium and aluminium of composition LmTiH2AlXX′. The role of the cocatalyst and the geometry of the ligand environment of the titanium atom in catalytic hydrogen transfer

Using bimetallic complexes of the compositions (C₅H₅)₂TiH₂MXX′ and (CH₂)_n(C₅H₄)₂TiH₂AlXX′ (M = B, Al; X,X′ = H,Hal, Alk, n = 1–3) as examples, the rate of homogeneous catalytic isomerization of α-olefins has been studied under the influence of the ligand environment, the nature of the transition metal, and the substituent at M. Only titanium and aluminium complexes with non-rigid ligand environments and involving terminal AlH bonds show catalytic activity in the reaction. An alkyl isomerization mechanism at the heterobinuclear centre is suggested. The first reaction step involves coordination of an olefin at the six-coordinate Al atom followed by the insertion of the olefin molecule in the terminal AlH bond.     

Computational design and structure-property relationship studies on (I2GaN3) n (n = 1–4) clusters

To look for the single-source precursors, density functional theory calculations were performed to study structures, IR spectra, and stabilities of the possible isomers for the clusters (I₂GaN₃) _n (n = 1–4). It is found that the optimized (I₂GaN₃) _n (n = 2–4) clusters all possess cyclic structure containing Ga-N_α-Ga linkages, and azido group in azides has linear structure. Trends in geometrical parameters with the oligomerization degree n are discussed. The IR spectra are obtained and assigned by vibrational analysis. Thermodynamic properties are linearly correlated with the oligomerization degree n as well as the temperature. Mean-while, the oligomerizations can occur spontaneously at 298.2 K.     

Oligomerization of α-olefins by the dimeric nickel bisamido complex [Ni{1-N(PMes2)-2-N(μ-PMes2)C6H4-κN,N′,P,-κP′}]2 activated by methylalumoxane (MAO)

The reaction of Li₂[1,2-{N(PMes₂)}₂C₆H₄], formed in situ from n-BuLi and the corresponding amines, with 1 equiv. of [NiBr₂(DME)] gives [Ni{1-N(PMes₂)-2-N(μ-PMes₂)C₆H₄-κ³N,N′,P-κ¹P′}]₂ (1). After activation by methylalumoxane (MAO), 1 is a highly active catalyst in the oligomerization and isomerization of α-olefins such as ethene, propene, isobutene, 1-hexene and 1,5-hexadiene. For ethene oligomerization turnover frequencies (TOFs) range from 3000 to 79015 h⁻¹, depending on the reaction conditions. The TOF for propene oligomerization reaches 1 190 730 h⁻¹. To our knowledge, catalyst 1, activated by MAO, is the most active catalyst for the oligomerization of propene and outperforms the best known complexes for this reaction. In the reactions with 1-hexene, 1,5-hexadiene and isobutene dimerization and isomerization products were observed.     

Theoretical study on the structures and properties of (Br2AlN3) n (n = 1–4) clusters

To look for the single-source precursors, the structures and properties of (Br₂AlN₃) _n (n = 1–4) clusters are studied at the B3LYP/6-311+G* level. The optimized (Br₂AlN₃) _n (n = 2–4) clusters all possess cyclic structures containing Al-N_α-Al linkages. The relationships between the geometrical parameters and the oligomerization degree n are discussed. The gas-phase structures of the trimers prefer to exist in the boat-twisting conformation. As for the tetramer, the most stable isomers have the S ₄ symmetry structure. The IR spectra are obtained and assigned by the vibrational analysis. The thermodynamic properties are linearly related with the oligomerization degree n as well as with the temperature. Meanwhile, the thermodynamic analysis of the gas-phase reaction suggests that the oligomerization be exothermic and favorable under high temperature.     

Synthesis of trialkylaluminum derivatives by the reaction of non-solvated aluminum hydride with α-olefins

Hydroalumination of -olefins by non-solvated polymeric aluminum hydride (AlH₃) _n occurs at 120—140 °C. Mechanochemical activation accelerates this reaction. The addition of catalytic amounts of the prepared R₃Al forms to the reaction system decreases the temperature of the process to 90—100 °C. The greatest initiation effect is observed when ate-complexes of the MAlR₄ type (M = Li, Na) are used: the reaction occurs with a higher rate already at 60—90 °C affording R₃Al free of admixtures of carbalumination products and dimers of -olefins.     

Monomer-isomerization polymerization. V. Effects of transition metal compounds on monomer-isomerization polymerizations of butene-2 and pentene-2

In order to clarify the correlation between polymerization and monomer isomerization in the monomer-isomerization polymerization of β-olefins, the effects of some transition metal compounds which have been known to catalyze olefin isomerizations on the polymerizations of butene-2 and pentene-2 with Al(C₂H₅)₃–TiCl₃ or Al(C₂H₅)₃–VCl₃ catalyst have been investigated. It was found that some transition metal compounds such as acetylacetonates of Fe(III), Co(II), and Cr(III) or nickel dimethylglyoxime remarkably accelerate these polymerizations with Al(C₂H₅)₃–TiCl₃ catalyst at 80°C. All the polymers from butene-2 were high molecular weight polybutene-1. With Al(C₂H₅)₃–VCl₃ catalyst, which polymerizes α-olefins but does not catalyze polymerization of β-olefins, no monomer-isomerization polymerizations of butene-2 and pentene-2 were observed. When Fe(III) acetylacetonate was added to this catalyst system, however, polymerization occurred. These results strongly indicate that two independent active centers for the olefin isomerization and the polymerizations of α-olefins were necessary for the monomer-isomerization polymerizations of β-olefins.     

Synthesis and structure of metalloid aluminum clusters—intermediates on the way to the elements

Metastable Aluminum(I) halide solutions proved to have a high potential for the synthesis of novel subvalent Al compounds, such as Al_nX_m species (X=Cl, Br, I; n<m, average oxidation state of Al below +3 or n>m, average oxidation state of Al below +1) or Al_nR_m species (R=bulky ligand; n>m). There are two principal reaction types, which are essential for the formation of the compounds discussed herein. The disproportionation, which finally results in Al(III) halides and Al metal and the metathesis which leads to a substitution of X atoms against R groups. By this way the metalloid cluster compounds [Al₇{N(SiMe₃)₂}₆]⁻, [Al₁₂{N(SiMe₃)₂}₈]⁻, [Al₁₄I₆{N(SiMe₃)₂}₆]²⁻, [Al₆₉{N(SiMe₃)₂}₁₈]³⁻, and [Al₇₇{N(SiMe₃)₂}₂₀]²⁻ could be isolated. The characteristic feature of these metalloid Al clusters is the number of AlAl contacts being larger than the number of Alligand bonds, i.e. there are more ‘naked’ than ligand-bonded Al atoms. Furthermore, the topology of the closest packing in Al metal is already pre-formed in these compounds.     

Effects of common synergistic agents on intumescent flame retardant polypropylene with a novel charring agent

In this article, the laboratory-made poly (p-ethylene terephthalamide) (PETA) was used as a novel charring agent and it combined with ammonium polyphosphate (APP) to prepare the intumescent flame retardant (IFR). For improving the flame-retardant efficiency of IFRs on polypropylene (PP), several general synergistic agents, such as common zinc oxide (Com-ZnO), nanometer structural zinc oxide (Nano-ZnO), zeolite 4A, and aluminum hypophosphite(Al(H₂PO₂)₃), were added in composites of PP/IFR, and the synergistic effect was investigated by the limited oxygen index (LOI), the UL-94 (vertical flame) test, thermogravimetric analysis (TG), thermogravimetry-fourier transform infraredspectroscopy (TG-IR) test, and scanning electron microscopy (SEM). It indicated that the flame retardancy was significantly enhanced in terms of prompting the char formation of PETA and interaction between APP and synergistic agents. Overall, Al(H₂PO₂)₃ was the most effective synergistic agent among them. TG-IR analysis showed that the addition of Al(H₂PO₂)₃ could delay the release of NH₃, and make the release of NH₃ more smooth, which was useful to form a dense char. SEM presented that compact, continuous and good intumescent charring layers were observed in all PP/IFR systems with synergistic agent.     

Unusual pathway of the tantalum-catalyzed carboalumination reaction of alkenes with triethylaluminum

Carboalumination of 1-alkenes (1-hexene, 1-octene, 1-decene) with Et₃Al in the presence of catalytic amounts of TaCl₅ results in a mixture of 2-(R-substituted)- and 3-(R-substituted)-n-butylaluminums (1:1 ratio) in total yields of 75–85%. The TaCl₅-catalyzed reaction of bicyclo[2.2.1]hept-2-ene, endo-tricyclo[5.2.1.0^2,6]deca-3,8-diene, and (exo/endo)-5-methylbicyclo[2.1.1]hept-2-ene with Et₃Al leads to the formation of diethyl[2-exo-(2′-norbornylethyl)]aluminums in high yields. DFT calculations confirm the thermodynamic preference of the final exo product. The multistep reaction mechanisms for the formation of the resultant organoaluminums through tantalacyclopentanes as key intermediates are also discussed.     

Ultrasonic Solution Degradations of Polystyrene and Substituted Polystyrenes in Tetrahydrofuran as Solvent

Abstract

Ultrasonic (70 W, 20 kHz) solution (2% THF) degradations of polystyrene (PS), poly(α-methylstyrene) (PαMeS), poly(p-isopropyl α-methylstyrene) (PpiPrαMeS), poly(p-chlorostyrene) (PpCIS), poly(p-bromostyrene) (PpBrS), and poly(p-methoxystyrene) (PpOMeS) have been carried out in tetrahydrofuran at 27° C. The average number of chain scissions S (where S = [(M _n)₀/(M _n)_t] - 1), computed from the overall values of [(M _n)₀ and (M _n)_t, were found to be different from those of S' (where S' = α([(M _n)₀/(M _n)_t] - 1)) based on the component (only that part of the polymer which is involved in degradation) data of the weight fraction (α), (M _n)₀, and (M _n)_t), S' for polystyrene and substituted polystyrene follows the order PS gt; PpCIS gt; PpiPrαMeS gt; PpBrS gt; PpOMeS gt; PαMeS. In the case of PS where degradations were also carried out at -20°C, lowering of the temperature increased the weight fraction of polymer degraded as well as S. Based on the viscosity and GPC data, it is concluded that the ultrasonic solution degradation of PS does not lead to branched polymers.     

无溶剂一锅法Al(ClO4)3催化合成α-氨基膦酸酯

以无水高氯酸铝为催化剂, 将芳香醛、芳香胺及亚磷酸酯在无溶剂条件下一锅法反应, 高效地合成了α-氨基膦酸酯, 该催化剂优于其它已发现的催化剂[如Mg(ClO₄)₂, BiCl₃, AlCl₃等], 建立了一种适用于含有钝化基团的芳香胺的α-氨基膦酸酯的新合成方法.     

Characterization of the functionalization reaction product of poly(styryl)lithium with ethylene oxide

The functionalization reaction of poly(styryl)lithiums (M_n = 1.3–9.9 × 10³) with ethylene oxide in benzene proceeds quantitatively ( > 99%) to produce the corresponding hydroxyethylated polymer as determined by vapor phase osmometry, size exclusion chromatography, end-group titration, thin layer chromatography, and ¹H- and ¹³C-NMR spectroscopy. ¹³C-NMR spectral analysis of the functionalized polystyrene with M_n = 1.3 × 10³ was consistent with addition of only one ethylene oxide unit to poly(styryl)lithium, i.e., no evidence for ethylene oxide oligomerization was observed.